shr 25 used for sale

Clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -Manufacturer: Rübenach, clamping plate: with support ribs on a solid base -Length: 2500mm -Width: 1500mm -Height: 835mm -Dimension: 2500/1500/H835 mm -Weight: 2440 kg

Control unit, control valve, hydraulic pressure regulator, pressure switch, PressureController -Manufacturer: Parker i, Hydraulic Pressure Controller Type SCPSD-250-14-152 -Pressure range: 250 bar -Accessories: including attachments, see photos -Total dimensions: 210/90/H50 mm -Weight: 0.7 kg

Dosing machine AG 8 DPE 250 built in 2012 with hot double jacket on the storage tank and accessories (filling heads and screw conveyor)

plate thickness: 4,0 mm ST plate thickness: 3,0 mm VA table-size: 800 x 800 mm blade length: 250 x 250 mm strokes per minute: ca. 55 min engine output: 4 kW weight of the machine ca.: 800 kg dimensions of the machine ca.: 1300 x 1300 x 1300 mm Furnishing: - electro-hydraulic notching machine, with angle adjustment 15° - 150° Angle adjustment by hand wheels - front panel - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - lateral clippings ejection - free-moving footswitch - Operation manual Machine link : http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9397092 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 250 t

Catalog No. : 7693 Type: CD 250 Producer: Mecamaq Made in: 2022 Characteristic: Pressing force: 250 t Maximum stroke: 250 mm Machine weight: 3200 kg

Outside micrometers, micrometer screw, outside micrometer -Manufacturer: Mahr, outside micrometer -Measuring range: 225-250mm -Reading: 0.01mm -Locking device -other sizes: also available -Dimensions box: 400/230/H30 mm -Weight: 2,2 kg

Suitable for high throughputs of ground meat, hamburger, breakfast and dry sausage production as well as production of vegetables, fillings, etc. The two mixing shafts with separate motors are independently switchable forward and reverse, at high and low speed. As standard the mixing shafts are equipped with paddles, enabling a fast emptying. 2 x units in stock

Machine type: MIG/MAG welding machine Make Merkle Type ME 251 LK Appendix No. 7206 Connection voltage 3 x 400 volts Adjustment range 40 - 250 amps Duty cycle 35% ED at 250 amps 60% ED at 170 amps Current setting 8 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire Feeder 2-Roller Drive Fuse 16 Ampere Dimensions L x W x H 815 x 440 x 680 mm Special accessories for point and interval equipment Weight 122 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, complete Adorned 1 pair of welding gloves 1 Pi ...

weight max. in kg: 2500 kg stroke: ? mm fork length: 1100 mm total power requirement: ? kW weight of the machine ca.: 4,5 t dimensions of the machine ca.: ? m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SPECIFICATIONS: Max. machining length mm: 2500 Max. machining width mm: 350 01 - 02 Milling/grinding units per week 7.5 03 - 04 Milling/grinding units per week 4.0 08 Workpiece clamping presses Fast workpiece return

Lever gauge, dial gauge, probe, probe -Manufacturer: Rekord, dial gauge weight -Measurement range: 0 - 250 kg -Dimensions case: 160/80/H35 mm -Weight: 0.4 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: split, for press brake -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 38 x 256 mm -Total length: 148 mm / 1 x 78/70 mm each -Weight: 8 kg

Offer 24303 Specifications: - Table size approx. 630 x 340 mm - Working range of the axes - X (longitudinal) approx. 400 mm - Y ( transverse ) approx. 220 mm - Z (vertical) approx. 400 mm - Max. distance between milling spindle and table surface 400 mm - Tool holder SK 40 - Working spindle speeds adjustable in 16 steps 45 - 2240 rpm - Mot table feeders X ; Y ; Z 6.3 - 1250 mm/min - Drive 400 V / 8.5 kW - Space requirement approx. W 1450 x H 1900 x D 1450 mm - Weight approx. 1600 kg - with: - 3 axis digital display HEIDENHAIN - Vertical milling head can be swivelled - Horizontal spindle counter holder - Machine vise

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° -Dimensions: see the drawing in the photos -Dimension: 39 x 254 mm -Length: 2085 mm / each 1 x 680/445/350/200/180/105/70/55 mm -Weight: 112 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

Maximum temperature: 1290 °C Interior dimensions: 630 x 530 x 760 mm electr. Connection: 400 V kW Space requirement: 1200 x 870 x 1810 mm Weight: 470 kg Heating capacity: 16.5 kW

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool angle: 90° -Dimension: 37 x 255 mm -Dimensions: see the drawing in the photos -Length: 100mm -Weight: 4.9 kg

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: pulley 4 grooves 250/4 -V-belt width: 17 mm -Receptacle: Ø 100 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 260 x 82 mm -Weight: 5.8kg

Tubular heater, heating tape, heating sleeve, mica heater, cylinder heater, heating cylinder, ceramic heating tape -Manufacturer: Erge, heating tape heating sleeve -Type: Ø56 x 22mm -Item No.: 814 682 65 -Heating power: 250 W -Voltage: 230V -Dimensions: 150/140/H60 mm -Weight: 0.3 kg

Danobat RTM-2500 CNC X600 CNC Surface Grinder Grinding Length: 100" Grinding Width: 28" Table Length Dimension: 98.43" Table Width Dimension: 19.690" -Grinding Wheel- Grinding Wheel Diameter: 20" Grinding Wheel Width: 4" Grinding Wheel Bore: 8" -Wheel Head- Angle Adjustment: 0 DEG Wheel Head Motor: 20 HP Wheel Head Speed: 1,200 RPM -EQUIPPED WITH- Fagor 8055 CNC Control Magnetic Swarf Conveyor

Control cabinet socket, Schuko socket -Manufacturer: Murr Elektronik, safety socket 16A / 250V -Type: 67950 -Number: 2x safety socket available -Price per piece -Dimension: 80/45/H70 mm -Weight: 0.1 kg/pc.

Height 1800 mm Width 650 mm Length 1450 mm Power supply: 400V 50Hz 3N Total power 1.1 kW Main Material Stainless steel, acid-resistant Number of heads Single-head Work belt width 300 mm Belt feed adjustmentYes Belt type made of plastic

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 102.36.99.48.0596 Construction year 1996 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Condition machine working Control type B&R Electric connection 3x380V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos

Boiler 250 litres, oil-heated

V-belt pulley, pulley with taper bushing, taper tension bushing, taper lock tension bushing -V-belt pulley: 3-groove pulley 250/4 -V-belt width: 17 mm -Taper bushing mount: Ø 100/107 x 52 mm (can be replaced) -Dimensions: Ø 257 x 65 mm -Weight: 11 kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 4 grooves -V-belt width: 17 mm -Intake: Ø65 x 65 mm -Dimension: Ø257 x 80 mm -Weight: 10.5kg

V-belt pulley, belt pulley -V-belt pulley: Pulley 5 grooves -V-belt width: 17 mm -Intake: Ø38 x 90 mm -Dimension: Ø250 x 135 mm -Weight: 18.3 kg

Dimensions: 3900x4600x2200mm Axle:XYZC (8-axis) Ø 100 x 100mm Bar Feeder:Ø52 Tool:BMT-55 Control:Fanuc 18 i-TB incl. BAR FEEDER - Profimat IRCO Breuning Dimensions: 1200x4000mm Year of Make: 2001 Ø 52 - 3000mm

diameter: 250 mm total power requirement: kW weight of the machine ca.: 0,05 t dimensions of the machine ca.: m 1 pc. three jaws chuck - diameter 250 mm bore 80 mm fastening: 4 pcs screws 135 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

V-belt pulley, pulley with taper bushing, taper tensioning bushing, taperlock tensioning bushing -V-belt pulley: 4-groove pulley 4SPB 3020 55 -V-belt width: 17 mm -Receptacle: Ø 55 mm for taper bushing 3020 (can be changed) -Quantity: 1x pulley available -Dimensions: Ø 255 x 80 mm -Weight: 14kg

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 190 mm -Type: 40-14M-55 -Pitch: 14 mm / strap width approx. 55 mm -Receptacle: Taper clamping bushing: Tecnamic 2517-40 Ø 40 x 45 mm -Dimensions: Ø 190 x 70 mm -Weight: 8.7 kg

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. three-jaws chuck - diameter 250 mm bore 75 mm with flange plate for mounting on milling table 0320 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: 250 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 pc. four jaw chuck - diameter 250 mm bore 75 mm KK 140 fastening: 4 pcs. screws M 16 / 170 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flat pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 160 mm -Type: 34-14M-85 - Pitch: 14 mm / belt width approx. 85 mm -Receptacle: Taper clamping bushing optibelt 3525-40 Ø 40 x 65 mm -Dimensions: Ø 160 x 100 mm -Weight: 7.5 kg

Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board -Manufacturer: Hygromatik, MP humidifier control display -Type: MP E-2522450 -Dimensions: 155/50/H95 mm -Weight: 0.3 kg

Key data: 490 mm, 650 mm

Stock-No. 1105-04024 Type of machine CNC Turning- and Milling Center Make MORI SEIKI Type SL 2500 Y /650 Year of manufacture 2003 Type of control CNC Storage location FRANCE Country of origin Japan Delivery time immediately Freight basis ex Warehouse Price Technical details turning diameter 490 mm turning length 650 mm control MSX-805 max. bar capacity 65 mm Travel -X Axis 305 mm Travel -Z AXIS 690 mm Travel -Y Axis +50, -50 mm Max. Speed Main Spindle 4000 min-1 spindle taper 1 A2-6 C - Axis 0.001 ° Spindle bearing diameter 120/85 mm No. of tools in turret 1 10 Shaft Cross Cut 25 x 25 mm Shank diameter 50 / 32 mm Turret Change Time 0.25 s max. spindle speed driven tools 6000 min-1 rapid power traverse in X-and Z direction 30 m/min Rapids C - Axes 400 min -1 drive capacity - spindle motor 18.5 kW power capacity - driven tools 5.5 kW swing diameter ove ...

Stock number: 3898 CIRCULAR SAW Manufacturer: KALTENBACH, Type: TL 255 Specifications: Size sawing capacity 80 mm Ø Miter 45 - 90 + 30 degrees Size blade diameter 250 mm Weight: 60 kg

Spray machine -Closing force: 25 tons -Screw diameter: 22 mm -Unilog 2040 control unit -Slat spacing: 250x250 mm -Data collection terminal -Parts removal device, manufacturer ASS -Temperature control unit, manufacturer Single

Inv. Num. : 7827 Type: LKT 250D Producer: PRESSMONT Created: GO 2019 Parameters: Compressive force: 2500 kN Ram stroke: 250 mm Machine weight: 21000 kg

Tailstock, counter bearing for dividing head, dividing head, lathe -Tailstock: center height 250 mm -Dimensions: see drawing in the photos -Dimensions: 285/180/H280 mm -Weight: 21.6 kg

Saw blade, wood saw blade, circular saw blade -Manufacturer: Leuco, saw blade HW -Type: 250x3.2/2.2 Z40 113 1 4 -Speed speed: n max. 7500 rpm -Dimensions of box: 320/320/H20 mm -Weight: 0.9 kg

Absolute encoder, encoder, rotary encoder, encoder, incremental encoder -Manufacturer: Balluff, Incremental Encoder -Type: BDG 6360-2-10-30-W126-2500-65 -Quantity: 2 encoders available -Price: per piece -Dimensions: 58/86/H70 mm -Weight: 0.3kg

Inv. Num. : 7817 Type: RUR 2500 G Producer: PIERCE Created: 2014 Parameters: Work table length: 6000 mm Work table width: 3000 mm Maximum sheet thickness when cutting: 120 mm Equipment: Rails Burning Machine Baths

Mori Seiki NL 2500 SY / 700 Lathe :::TECHNICAL SPECIFICATIONS::: CNC Model: Mori Seiki CNC Version: MSX-850 III Main spindle nose: ASA 8 Main spindle power: 18.5Kw Main spindle bar pass: 80mm Turning diameter: 360mm Turning length: 705mm Main spindle speed: 4000 Number of tool turrets: 1 Number of tool positions for the first turret: 12 Number of Motorized First Turret: 12 First turret X-axis travel: 260mm Y-axis travel first turret: +- 50mm First turret Z-axis travel: 795mm Fast feeds for linear axes X Y Z: 30m/min Sub-spindle: yes Spindle nose: ASA 6 Number of counter-spindle speeds: 6000 Counter spindle power: 11Kw Bar loader model and brand: Iemca Master 880 Chip conveyor: belt Presetting: yes Machine equipment: Set of fixed and motorized tool holders :::D DIMENSIONS AND WEIGHT::: Length: 4420mm Width: 2 ...

Maximum force of slide: T 250 Stroke of slide: mm 400 Stroke rate per min 12 Adjustability of slide: mm 120 Bed area (W x D): mm 2500x1400 Main motor power: kW 32 Max depth of extraction 100mm pressing force during the maximum depth of extraction T 100 Force holding extract unit: T 50 Height above ground: mm 5000 Weight: 66 ton

Nominal force, kN 2500 Slider stroke, mm 400 Number stroke per minute 25 adjustment mm 260 Distance between table and slider, mm 750 Main motor power kW 47 Table size width / length mm 1250/2500 Dimensions of the machine Length Width Height (mm) 4555_2900_5855 Weight kg 50100

PESTER SHRINK-OVERWRAPPING MACHINE WITH HEAT-SHRINK TUNNEL, MODELS PEWO-PACK 250 COMPACT + PEWO-THERM III 450E Year of construction: 2007 The machine applies heat-shrink film (film material: polyethylene) around each package for packaging. Safety is ensured by locking devices. The parameters for products and format changes are stored, and are easily repeatable. COMPOSED OF PEWO-PACK 250 COMPACT WRAPPING MACHINE Year of construction: 2007 compact and ergonomic machine with cantilever design state-of-the-art sealing technology for secure packages patented splicer for fully automatic film reel change, without machine downtime PRODUCTION FEATURES Production: up to 60 packages/min. Min. format folding boxes: 30 x 15 x 60 mm [l x w x h] packages: 60 x 30 x 60 mm [L x W x H] Max. format folding boxes: 150 x 90 x 180 mm [l x w x h] packages: 360 x 180 x 25 ...

overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. workpiece weight ... 10000 kg Main engine power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. More info on request.

Automatic Grinder Manufacturer: Seydelmann Model: AV 250 K Completely made of stainless steel Electric power: 81kW Voltage: 380V 60Hz Hole plate diameter: 250 mm Hopper content: 400 liters - 1000 liters