shot blasting used for sale

Used Overhauled Automatic Bag In Box Sacmi Filler 2009 Year 2009 A complete Overhaul it has been completely overhauled by SACMI in April 2022 Production 3 lt 600 bag per hour 5 lt 500 bag per hour 10 lt 400 bag per hour 20 lt 200 bag per hour Construction features This Bag in Box for sale is made of stainless steel with a supporting frame made of sturdy weld Shot peened tubular of the self draining and washable type specific for the food industry Bag picking and feeding system with a tipping hook that pushes them gently and at an adjustable speed through the neck Adjustable tear off cutter inserted in the bag loading position before filling to avoid unnecessary mechanical stress to the sack The poppet filling valve of the Bag in Box for sale is built completely of AISI 316 stainless steel and with seals designed to be sanitized with steam equipped with decanting for the injection of iner ...

Generator -Monobloc design; 2.2kW Compact digital generator; Housing heat capacity: 1040,000Hu; Housing heat capacity: 1,040,000HU X-ray Tube - Stationary anode, dual focal spots 0.6 and 1.4mm; Tube assembly total filtration ³ 3.0mm Al; Anode heat capacity: 76,000HU; Anode cooling rate: 37,000Hu/min Collimator - Iris collimation; Dual opposing parallel semi-transparent shutters (180° rotation) Image Intensifier - Tri-mode 23/15/11cm (9/6/4.5); Grid: 8:1 ratio 40 l/cm (102 l/in.) TV Camera - High resolution CCD-Camera; Matrix: 752 x 582; Bandwidth: 20MHz; Video signal: CCIR /50Hz, 625 lines Fluoroscopy - Focal spot: 0.6mm; kVp range: 40-110; mA range: 0.1-4.0 0.2-8mA (snapshot); Fluoro modes: - Continuous, - Snapshot, - Pulsed (2p/3s); ABC: Automatic Brightness Control; Dose area product (optional); Skin spacer 30cm (optional) Radiography - Focal spot: 1.4mm; kVp ra ...

B&A REF: 8963 TON: 160 SHOT WEIGHT: 402 SCREW DIAMETER: 50MM STROKE VOLUME: 442CM3 INJECTION PRESSURE: 1946AR PLATEN SIZES: 770 X 770MM DBTB: 520 X 520MM MIN MOULD HEIGHT: 275MM MAX MOULD HEIGHT: 585MM MOULD OPENING STROKE: 810MM MAX DAYLIGHT: 1085MM EJECTOR STROKE: 150MM CONTROLS: NC5 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

B&A REF: 9004 TON: 200 SHOT WEIGHT: 570G SCREW DIAMETER: 60MM STROKE VOLUME: 636CM3 INJECTION PRESSURE: 1351AR PLATEN SIZES: 830 X 830MM DBTB: 560 X 560MM MIN MOULD HEIGHT: 310MM MAX MOULD HEIGHT: 660MM MOULD OPENING STROKE: 575MM MAX DAYLIGHT: 1235MM EJECTOR STROKE: 180MM CONTROLS: NC4 AIR VALVES: 1 CORE PULL: 1 SCREW DRIVE: HYDRAULIC

B&A REF: 8983 TON: 380 SHOT WEIGHT: 1310G SCREW DIAMETER: 75MM STROKE VOLUME: 1370CM3 INJECTION PRESSURE: 1550AR PLATEN SIZES: 980 X 980MM DBTB: 650 X 650MM MIN MOULD HEIGHT: 200MM MAX MOULD HEIGHT: 730MM MOULD OPENING STROKE: 710MM MAX DAYLIGHT: 1140MM EJECTOR STROKE: 240MM CONTROLS: SEF 100 AIR VALVES: 1 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

B&A REF: 8986 TON: 700 SHOT WEIGHT: 5618G SCREW DIAMETER: 120MM STROKE VOLUME: 6107CM3 INJECTION PRESSURE: 1500AR PLATEN SIZES: 1560 X 1560MM DBTB: 1060 X 1060MM MIN MOULD HEIGHT: 350MM MAX MOULD HEIGHT: 1100MM MOULD OPENING STROKE: 1150MM MAX DAYLIGHT: 2250MM EJECTOR STROKE: 350MM CONTROLS: SEF 2000 AIR VALVES: 4 CORE PULL: 2 SCREW DRIVE: HYDRAULIC

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 2001 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: Thermolift 100-2 - Year of construction: 2001 - Clamping force: 1,000 kN - Screw diameter: 45 mm - Injection pressure: 1,670 Bar - Shot volume: 230 cm³ - Working hours: 58,700

Key data: 500 mm, 25

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 25 mm - Injection pressure: 1,800 Bar - Shot volume: 39 cm³ - Working hours: 52,100

Key data: 500 mm, 30

This ARBURG injection moulding machine is in machine storage at Plastima Used Machinery. The injection moulding machine is from 1999 and is in good condition. - Make: ARBURG GmbH + Co. KG - Model: 320 S 500-150/60 - Year of construction: 1999 - Clamping force: 500 kN - Screw diameter: 30 mm - Injection pressure: 2,200 Bar - Shot volume: 78 cm³ - Working hours: 37,400

Ferromatik K140-S Injection moulding machine Year : 1997 Weight : 9300 kg clamping force : 1400 kN voltage: 230 motor outputs power : 44,7 kW minimum moulding size in mm : 200 mm mould opening size : 750 mm (950 mm) tie bar distance : 500 x 500 mm maximum produce parts with a shot size 254 ccm / 216 gramm oil to fill in : 400 l hours of Production : 137,000 working Condition : good special features : 2 pcs. hydraulic core pull 4 pcs. air valves hot runner 16 zones color feeder connectivity option

Description: Machine number: 211355 Operating voltage: 400V Frequency: 50Hz Control voltage: 230 V Rated current: 80 A Total rated current: 118 A Total connection: 62 kW Closing force: max. 1100 kN Closing force: max. 50 kN Opening force: max. 34/255 kN Opening distance: max. 500 mm Tool installation height: at least 250 mm Distance between the clamping plates: max. 750 mm Light column spacing: 470 x 470 mm Tool platens: 637 x 637 mm Weight of movable tool halves: max. 760 kg Ejector force: max. 40 kN Ejector path: max. 175 mm Screw diameter: 30 mm Effective auger length: 20 Snail travel: max. 120 mm Calculated displacement volume: max. 85 cm³ Shot weight: max. 77 g PS Material throughput: max. 13.5 kg/h PS Spray pressure: max. 2000 bar Injection flow: max. 236 cm³/s Screw torque: max. 250 Nm Nozzle contact force: max. 50 kN Nozzle lifting path: max. 210 mm ...

Toshiba IS 450 GSW injection molding machine Year of production - 2007 Parameters: Closing force: 4,410 kN Screw diameter: 70 mm Injection volume: 1480 cm³ Shot weight: 1360 g Min.height of the fastening plate: 1230 mm Min.width of the fastening plate: 1230 mm The distance between the columns - 870X870 mm Ejector force: 243 kN Ejector stroke length: 1050 mm Maximum injection pressure: 178 MPa Oil tank capacity - 1500 liters Machine length: 7600 mm Machine width: 2200 mm Machine height: 2100 mm Injection weight: 22,000 kg Machine with a robot and a cage

Clamping force [kN] 250 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 270 x 270 Min./max. mold height [mm] min125mm Maximum opening width [mm] 450 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Krauss Maffei KM 200-1400 C2 + injection molding machine Year of production - 2004 Fully hydraulic locking system. MC 4 control system with color monitor, integrated control panel and built-in disk drive. Plasticizing system complete plasticizing system for thermoplastics version with abrasive protection, screw diameter 60mm, with back-lock and open nozzle. Closing force 200 T Screw diameter 60 mm Clearance between columns X 560 mm Clearance between Y columns 560 mm Injection volume 679 cm³ Shot weight 476 g The specific injection pressure is 2000 bar Tool plates length 915 mm Tool plates width 910 mm Robot interface Length x width x height 5700.0 × 1700.0 × 2200.0 Weight 10,500 kg

Krauss Maffei KM 300 – 1900 C2 injection molding machine Year of manufacture -2000 Control : MC4 Closing unit Clamping force: 3000 kN Mold opening force, max.: 160 kN Sliding force of the moving plate Opening: 86 kN Sliding force of the moving plate Closing: 68 kN Mold plate size (h x v): 995 mm x 1050 mm Distance between columns (h x v): 630 mm x 630 mm Mold opening stroke: 820 mm Min. mold height: 330 mm mold height: 1150 mm Hydraulic ejector - stroke: 200 mm Forward/reverse ejection force: 58/28 kN injection unit Screw diameter: 70mm Ls/D ratio: 20 Injection pressure: 1778 bar Displacement: 1047 cc Shot weight, PS: 953 g Injection speed: 400cc/sec Screw speed: 218 1/min Plasticizing capacity max.: 75 g/s Nozzle pressure: 110 kN Electrical and hydraulic equipment Pump motor nominal capacity: 55 kW Installed heating power: 30 kW Adjustable barrel heating zo ...

Arburg 420C-1000-350 with a conveyor belt Year of production: 2001 Producer: Arburg Shot weight: 210 g Closing force: 1,000 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 420x420 mm The size of the plates: 570x570 mm Min mold height: 250 mm Type of control: Selogica German Installed capacity: 32.2 kw Weight: 3430 kg Dimensions: 4.4x1.7 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Arburg 470S-1300-350 hybrid with electric auger drive Year of production: 2005 Shot weight: 127 g Closing force: 1,300 kN Screw diameter: 35 mm Injection pressure: 2500 bar Column spacing: 470 x 470 mm Plate size: 650 x 650 mm Min mold height: 275 mm Type of control: Selogica German Installed power: 33.9 kW Working hours: 85,400 h Weight: 5.100 kg Dimensions: 5 x 1.8 m Hopper: No. Core sequence: Yes Robot Socket: Yes Air valve: Yes

Arburg 420C-1300-675 Year of production: 2000 Shot weight: 297 g Closing force: 1,300 kN Screw diameter: 50mm Injection pressure: 2080 bar Column spacing: 420 x 420 mm Plate size: 615 x 615 mm Mold height min: 350 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 84,840 h Weight: 4330 kg Dimensions: 4.9 x 1.8 m Hopper: No. Core sequence: Yes Air valve: Yes

Arburg 420C-1000-250 with a conveyor belt Year of production: 1998 Producer: Arburg Shot weight: 97 g Closing force: 1,000 kN Screw diameter: 30 mm Injection pressure: 2470 bar Column spacing: 420x420 mm The size of the plates: 570x570 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 25 kw Weight: 3180 kg Dimensions: 4.5x1.7 m Hopper: No. Core sequence: Yes

Clamping/injection matrix Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 80 Injection volume [cm3] 1433 Shot weight [g] 1304 Injection pressure [bar] 1829 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 36 Dimensions and weight (approximately) Net weight with control cabinet [t] 15.3 Dimensions (L x W x H) [m] 6,91 m x 2,20 m x 2,41 m

Battenfeld HM 500/3400 S injection molding machine Year of production - 2006 Control: Unilog B6 Injection unit… / 3400 S Screw diameter: 65 mm Specific injection pressure: 2500 bar Injection volume: 1244 ccm Shot weight: 1070 g Crimping 500 / ... Strength: 500 t Board dimensions: 1590 x 1470 mm Clearance between columns: 1000 x 800 mm Tool height: 450… 1600 mm Opening for a path of 1150 mm Distance plates: 1600 mm - 1 x pneumatic valve - 1 x NW6 hydraulic core movable plate - Connection via robot. Euromap 67

Engel Victory 200/50 Focus Shot weight: 89 g Closing force: 500 kN Screw diameter: 30 mm Injection pressure: 1451 (2205) bar Column spacing: No columns Plate size: 450 x 500 mm Type of control: EC 200 Language: German, Other Installed power: 31 kW Working hours: 79,044 h Weight: 2700 kg Dimensions: 3.5 x 1.4 m A string of cores

Demag Ergotech Viva 800-400 Shot weight: 205 g Closing force: 800 kN Screw diameter: 40 mm Injection pressure: 1830 bar Column spacing: 400 x 400 mm Plate size: 590 x 580 mm Mold height min: 250 mm Type of control: NC4 German Installed power: 26.1 kW Working hours: 70 180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m A string of cores

Battenfeld HM 100/525 Injection molding machine Year: 2006 Control version: B 4 Technical details Closing force: 1000 kN Mold plate size (hxv): 680mm x 594mm Distance between columns: 470 mm x 420 mm Mold opening stroke: 500 mm Mold height min .: 250 mm Maximum ground clearance: 750 mm Hydraulic ejector - stroke: 150 mm Ejector force forward / back: 41.2 kN Injection unit Screw diameter: 40 mm Ls / D ratio: 22 Injection pressure: 2,100 bar Injection volume: 251 cm³ Shot weight, PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1 / min Plasticization rate: 30.4 g / sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating capacity: 12.1 kW Adjustable barrel heating zones: 1 + 3 Pump power 18.5 kW Oil 275 liters Dimensions and weights Total machine weight: 4.600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m the machine has a hyd ...

Demag Extra 150-430 Clamping/injection matrix Clamping force [kN] 1650 Mounting plate dimensions (hxv) [mm] 705 x 700 Clearance between columns (hxv) [mm] 475 x 475 Min./max. mold height [mm] 250-480 Maximum opening width [mm] 930 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 231 Shot weight [g] 205 Injection pressure [bar] 2020 Electro-hydraulic equipment Power rating of the pump motor [kW] 18,5 Power rating of barrel heating [kW] 11,1 Dimensions and weight (approximately) Net weight with control cabinet [t] 5,3 Dimensions (L x W x H) [m] 4,9 x 1,5 x 2,0

Arburg 420C-1000-250 without hopper, with gas boost Make: ARBURG Type: 420C-1000-250 Built: 1999 Control: Selogica Country of origin: Germany Screw Dia: 35 mm Swept Volume: 144 ccm Shot Weight: 121 g Injection Pressure: 1820 bar Clamping Force: 1000 kN Tie Bar Distance: 420 x 420 mm Platen Size: 570 x 570 mm Mould height min.: 250 mm Opening Stroke: 500 mm Total day-light max: 750 mm Power: 28,5 kW Workinghours: 40702 h Dimensions: 5 x 1,80 m Weight: 3180 kg Equipment Language: German Manual

Clamping/injection matrix Clamping force [kN] 2750 Mounting plate dimensions (hxv) [mm] 970 x 970 Clearance between columns (hxv) [mm] 630 x 630 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 763 Shot weight [g] 694 Injection pressure [bar] 2144 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 7,5 x 2,2 x 2,7 m

Demag EXTRA 200-840 ECQ, without hopper Make: Demag Type: EXTRA 200-840 Construction year: 2007 Steering: NC4 Location: Poland Country of origin: Poland Screw diameter 50 mm Stroke volume: 442 cc Shot weight: 400 g Injection pressure: 1646 bar Closing force: 2000 kN Distance between bars: 580 x 580 mm Clamping plate size: 860 x 860 mm Power: 45 kW Dimension: 6.7 x 1.8 m Weight: 9000 kg Furnishing Robot interface: EUR 67 Air valve: 1x

Krauss Maffei KM 650 - 3500 C2 Injection molding machine Year of production - 1999 Location - Poland MC control type 4 Unit crimping Crimping force 6500 kN Tool opening force, max. 346 kN The size of the plates (height x height) 1620 x 1470 mm clearance between columns (height x height) 1000 x 930 mm mold opening path 1150 mm mold mounting height min. Opening width 540 mm 1690 mm Ejector stroke 250 mm Ejector force forward / reverse 226 kN Injection unit Screw diameter 90 mm Ls / D ratio 20 Injection pressure 1742 bar shot weight 1742 g Plasticizing flow max. 83 g / sec nozzle pressure 173 kN Electro-hydraulic devices Rated power of the pump motor 90 kW Installed heating power of 36 kW Cylinder heating control zones 7 Oil filling 1240 ltr. Dimensions and weights Space requirement approx. 9.06 x 2.85 x 2.60 m Gross weight is 30,870 kg Tool weight 11400 kg

Arburg 520C-1300-350 with bimetallic plasticizing system Shot weight: 194 g Closing force: 1,300 kN Screw diameter: 45 mm Injection pressure: 1670 bar Column spacing: 520x520 mm The size of the plates: 715x715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 32.2 kW Working hours: 95 616 h Weight: 6380 kg Dimensions: 5.1x1.9 m Hopper: No. Core sequence: Yes Robot Socket: Yes

Engel Victory 500/120 Tech Shot weight: 231 g Closing force: 1,200 kN Screw diameter: 40 mm Injection pressure: 1300 (2020) bar Column spacing: No columns Plate size: 740 x 680 mm Type of control: CC200 German Installed power: 41 kW Working hours: 96,830 h Weight: 7400 kg Dimensions: 5 x 1.7 m A string of cores Robot nest

Arburg 520C-2000-675 Shot weight: 240 g Closing force: 2,000 kN Screw diameter: 45 mm Injection pressure: 2500 bar Column spacing: 520 x 520 mm Plate size: 715 x 715 mm Mold height min: 250 mm Type of control: Selogica German Installed power: 44.9 kW Working hours: 126,766 h Weight: 6630 kg Dimensions: 5.6 x 1.7 m Robot nest Air valve

Clamping/injection matrix Clamping force [kN] 6500 Mounting plate dimensions (hxv) [mm] 1465 x 1360 Clearance between columns (hxv) [mm] 1025 x 930 Min./max. mold height [mm] 450 / 950 Maximum opening width [mm] 1350 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1193 Shot weight [g] 1085 Dimensions and weight (approximately) Net weight with control cabinet [t] 33 Dimensions (L x W x H) [m] 8,3x2,5x2,33

Clamping force [kN] 400 Mounting plate dimensions (hxv) [mm] 440 x 440 Clearance between columns (hxv) [mm] 320 x 320 Min./max. mold height [mm] min 150 Maximum opening width [mm] 475 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 45 Shot weight [g] 41,5 Injection pressure [bar] 2776 Dimensions and weight (approximately) Net weight with control cabinet [t] 2,6 Dimensions (L x W x H) [m] 3,27 x 1,35 x 1,82

Clamping force [kN] 600 Clearance between columns (hxv) [mm] 370 x 320 Min./max. mold height [mm] min 200 Maximum opening width [mm] 650 Injection unit Screw diameter [mm] 22 Injection volume [cm3] 41,8 Shot weight [g] 38 Injection pressure [bar] 2863 Dimensions and weight (approximately) Net weight with control cabinet [t] 3 Dimensions (L x W x H) [m] 3,39 X 1,89 X 1,24

Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 610 X 610 Clearance between columns (hxv) [mm] 405 x 405 Min./max. mold height [mm] min 250 Maximum opening width [mm] 750 Injection unit Screw diameter [mm] 35 Injection volume [cm3] 156 Shot weight [g] 142 Injection pressure [bar] 2429 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,5 Dimensions (L x W x H) [m] 4,01 x 1,39 x 2,02

Krauss Maffei KM 420-3000 CX Clamping/injection matrix Clamping force [kN] 4200 Mounting plate dimensions (hxv) [mm] 1270 x 1230 Clearance between columns (hxv) [mm] 800 x 800 Min./max. mold height [mm] min 580mm Maximum opening width [mm] 1600 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1232 Shot weight [g] 1121 Injection pressure [bar] 2389 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Power rating of barrel heating [kW] 29 Dimensions and weight (approximately) Net weight with control cabinet [t] 22,3 Dimensions (L x W x H) [m] 7,32 x 2,49 x 2,38

Clamping/injection matrix Clamping force [kN] 8500 Mounting plate dimensions (hxv) [mm] 1580 x 1580 Clearance between columns (hxv) [mm] 1100 x 1100 Maximum opening width [mm] 2250 Injection unit Screw diameter [mm] 105 Injection volume [cm3] 5478 Shot weight [g] 4980 Dimensions and weight (approximately) Net weight with control cabinet [t] 41 Dimensions (L x W x H) [m] 9,9 x 2,9 x 2,7 m

Clamping force [kN] 5500 Clearance between columns (hxv) [mm] 1020 x 920 Maximum opening width [mm] 2251 Injection unit Screw diameter [mm] 70 Injection volume [cm3] 1074 Shot weight [g] 1034 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 39,5

Krauss Maffei KM 160-750 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 950 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 393 Shot weight [g] 357 Injection pressure [bar] 1892 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] 4,6 x 1,6 x 2,1

Demag Extra 160-600 Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 770 X 770 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] 275 Maximum opening width [mm] 1085 Injection unit Screw diameter [mm] 45 Injection volume [cm3] 291 Shot weight [g] 291 Injection pressure [bar] 1910 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 11,3 Dimensions and weight (approximately) Net weight with control cabinet [t] 6,4 Dimensions (L x W x H) [m] 5,3 x 1,5 x 2,0

Schneckendurchmesser/Screw Dia: 72 mm Hubvolumen/Swept Volume: 1283 ccm Spritzgewicht/Shot Weight: 1218 g Spritzdruck/Injection Pressure: 1600 bar Schliesskraft/Clamping Force: 5500 kN Holmabstand/Tie Bar Distance: 1010 x 1010 mm Aufspannplattengrosse/Platen Size: 1475 x 1485 mm Werkzeugeinbauhohe min./Mould height min.: 300 mm Werkzeugeinbauhohe max./Mould height max.: 1250 mm Offnungsweg/Opening Stroke: 940 mm Plattenabstand max/Total day-light max: 2190 mm Betriebsstunden /Working hours 29.000 h Leistung/Power: 190 kW Abmessung/Dimensions(LxWxH): 9,4 x 2,8 x 2,7 m Gewicht/Weight: 40200 kg Ausstattung/Equipment Sprache/Language: Englisch/English , Polnisch/Polish Luftventil/ Air valve: 9x Roboterschnittstelle / Robot slot: Euro 12 Kernzug/ Core pullers: 2x Heizkanal/ heating channel: 32x Trichter/ hopper: Yes Control: IPC 150, CDS-600

Demag Ergotech Compact 1500-610 Clamping/injection matrix Clamping force [kN] 1500 Mounting plate dimensions (hxv) [mm] 750 x 750 Clearance between columns (hxv) [mm] 500 x 500 Injection unit Screw diameter [mm] 50 Shot weight [g] 330 Injection pressure [bar] 1973 Dimensions and weight (approximately) Net weight with control cabinet [t] 7 Dimensions (L x W x H) [m] 5.20x1.60x2.10

Demag Ergotech 800-310 Clamping/injection matrix Clamping force [kN] 800 Mounting plate dimensions (hxv) [mm] 540 x 540 Clearance between columns (hxv) [mm] 400 x 400 Injection unit Screw diameter [mm] 35mm Shot weight [g] 149 Injection pressure [bar] 2024 Electro-hydraulic equipment Power rating of the pump motor [kW] 15 Power rating of barrel heating [kW] 9,4 Dimensions and weight (approximately) Net weight with control cabinet [t] 3,6 Dimensions (L x W x H) [m] 4.05x1.27x1.91

Clamping/injection matrix Clamping force [kN] 3500 Mounting plate dimensions (hxv) [mm] 1060 x 1095 Clearance between columns (hxv) [mm] 710 x 710 Min./max. mold height [mm] min 380 Maximum opening width [mm] 1300 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 432 Shot weight [g] 393 Injection pressure [bar] 2304 Electro-hydraulic equipment Power rating of the pump motor [kW] 75 Dimensions and weight (approximately) Net weight with control cabinet [t] 15,5 Dimensions (L x W x H) [m] 6,79 x 2,17 x 2,25

Clamping force [kN] 3500 Clearance between columns (hxv) [mm] 730 x 730 Injection unit Screw diameter [mm] 62 Injection volume [cm3] 749 Shot weight [g] 718 Injection pressure [bar] 2400 Dimensions and weight (approximately) Net weight with control cabinet [t] 23,5

Demag Ergotech Concept 110/470-600 Clamping/injection matrix Clamping force [kN] 1100 Mounting plate dimensions (hxv) [mm] 670 x 660 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] min 250 Maximum opening width [mm] 850 Injection unit Screw diameter [mm] 50 Injection volume [cm3] 398 Shot weight [g] 359 Injection pressure [bar] 1550 Electro-hydraulic equipment Power rating of the pump motor [kW] 33,3 Power rating of barrel heating [kW] 15,7 Dimensions and weight (approximately) Net weight with control cabinet [t] 5,6 Dimensions (L x W x H) [m] 4,9 x 1,5 x 2,0

Demag Ergotech 2000-840 Clamping/injection matrix Clamping force [kN] 2000 Mounting plate dimensions (hxv) [mm] 830 x 830 Clearance between columns (hxv) [mm] 560 x 560 Injection unit Screw diameter [mm] 60 Injection volume [cm3] 636 Shot weight [g] 570 Injection pressure [bar] 1351 Dimensions and weight (approximately) Net weight with control cabinet [t] 10 Dimensions (L x W x H) [m] 5.70x1.70x2.10

Krauss Maffei KM 160-380 CX Clamping/injection matrix Clamping force [kN] 1600 Mounting plate dimensions (hxv) [mm] 820 x 845 Clearance between columns (hxv) [mm] 520 x 520 Min./max. mold height [mm] min 300 mm Maximum opening width [mm] 1250 Injection unit Screw diameter [mm] 40 Injection volume [cm3] 201 Shot weight [g] 183 Injection pressure [bar] 1860 Electro-hydraulic equipment Power rating of the pump motor [kW] 22 Power rating of barrel heating [kW] 10,97 Dimensions and weight (approximately) Net weight with control cabinet [t] 6 Dimensions (L x W x H) [m] m 4,6 x 1,6 x 2,1

Clamping force [kN] 1100 Clearance between columns (hxv) [mm] 470 x 470 Min./max. mold height [mm] 200 - 450 Injection unit Screw diameter [mm] 25 Shot weight [g] 55,8 Injection pressure [bar] 2100 Dimensions and weight (approximately) Net weight with control cabinet [t] 4,6 Dimensions (L x W x H) [m] dł. 420 x szr.140 x wys. 270 cm,