shot blast machine used for sale

bundle sizes from 30 x 12 x 50mm up to 350 x 200 x 200mm (minimum individual carton size 15 x 12 x 50mm), output up to 50 bundles per minute. Includes infeed and outfeed conveyors.

Combined punching machine, hydraulic Hydraulic Ironworkers 4 kW 900 kg

Croissant winder Fritsch BCW 1000 tableside machine used table croissant wrappers from Fritsch Model BCW 1000 also suitable for cutting tables immediately available for sale in the warehouse in Bielefeld. -380 volts

Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2009 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Macmon M100 Universal Milling Machine with Digital Display -Feed range in steps 9-450mm/min -Horizontal 40-2000 rpm -21 spindle speeds vertical 50-2500 rpm -Spindle holder SK40 -Projection of the V-spindle approx. 100-320mm -Installation height under spindle 350mm -Vertical Head Quill 70mm -Vertical head swivels 360 degrees -Fixed angle table 215x600mm -Milling slide path transverse manual 170mm -Vertical motor/manual 310/340mm -Table travel longitudinal motor/manual 290/310mm -X-travel 310mm -Y-travel 340mm -Z-travel 170mm -Automatic feeds and rapid traverses in all 3 axes -Total power requirement 2.5kW -Spindle drive 2.2kW -Total drive 2.5kW-380V-50Hz Dimensions: LxWxH 1.5x0.7x1.5 meters / Weight 900Kg

Offer via gebr. Pipe cutting- chamfering machine Fabr. GF GEORG FISCHER Type RA41 Built in 2001 Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. pipe feeding unit height-adjustable Used

Code: 0310 Brand: ESY - ITALY Model: TSI 300 - CE Standard Saw spindle moulder with tilting blade and scoring unit for carpentry workshops, custom-made furniture, wooden doors, window frames, kitchens, plastics, composite materials and various - CE Standard Technical data: Aluminium carriage length 2000 mm Support with metric rod with 2 reference stops Max blade diameter mm 250 Hole 30 Three-phase motor 2 Hp - 4500 rpm Scoring unit Tilting blade 0-45° Parallel guide width 800 mm 2-speed spindle moulder - 3500/7000 rpm - Max tool diameter 150 mm - Shaft diameter 30 mm Overall dimensions of assembled machine mm 2100 x 1900 x 1100 h Overall dimensions for transport mm 2100 x 1100 x 1100 h Weight kg 260

Offer via gebr. Thread cutting machine with pipe saw RA21 Made GEORG FISCHER type KM2, built 1997 Technical data: Thread diameter 3/8" - 2" Power connection 200 - 240 V / 50 Hz With mobile undercarriage with threaded cutting jaws 3/8", 1/2", 3/4", 1", 11/4", 11/2",2" used, in good condition.

We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.

Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA6 Saw has been completely overhauled and tested. - Engine completely new - Gearbox re-stored and new seals Technical data: Outer pipe diameter 75-183mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 40 - 215 rpm. Speed levels electronically 1 - 6 Power 1800 W incl. mounting plate used, in good condition.

MAZAK Mega Turn 900 CNC Vertical Lathe TECHNICAL FEATURES: Year: 2018 NC Type: MAZATROL SmoothG Maximum diameter Machinable: 920 [mm] Maximum diameter Turning time: 1000 [mm] X-axis travel: 470 [mm] Z-axis travel: 876 [mm] X-axis fast feed speed: 24000 [mm/min] Y-axis fast feed speed: 24000 [mm/min] Spindle Nose: A2-15 Maximum speed Spindle: 1250 [rpm] Spindle power: 30 [kW] Spindle torque: 3655 [Nm] Maximum distance between spindle nose and turret face: 1030 [mm] Maximum weight machinable (including mandrel): 3000 [Kg] Minimum distance. between spindle nose and turret face: 154 [mm] Number of turret stations: 12 Turret Index Time: 0.4 [s/pos] Irrigation tray capacity: 516 [l] Installed power : 58.9 [kVA] Rated Current: 109 [A] Supply voltage: 400 [V] Working time: 2472 [h] Number of cutting hours: 2297 [h] Dimensions: 2375 × 4558 × 3659 [mm] Weight: 1300 ...

The name mentioned is technical specifications for a C-bracket used as an accessory for Tucker stud welding systems (from Stanley Engineered Fastening). These brackets are usually used on automated welding heads or manual welding guns to generate the back pressure during the welding process. Technical Breakdown The letters and numbers describe the geometric dimensions of the C-bracket: a 150: Usually stands for the projection (depth) of the bracket of 150 mm. e 220: Refers to the opening width (internal width) between the legs of 220 mm. d 60: Usually refers to the diameter or thickness of the bracket material or the holder (60 mm). m 212115: This is the manufacturer's specific material number or article number for the unique identification of the spare part. Bossard Bossard +1 Application area These C-brackets are part of the Tucker SWS (Stud Welding System). They are mainl ...

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

Offer via gebr. outdated - pipe separation and chamfering machine Fabr. GF Type RA4 Saw has been completely overhauled and tested. - Engine re-stored and new seal. - Gearbox re-stored and new seals Technical data: Outer pipe diameter 15-120mm Wall thickness 1 - 10 mm Power connection 200 - 240 V / 50 Hz stepless speed 150 - 270 rpm. Speed levels electronically 1 - 6 Power 1600 W incl. mounting plate used, in good condition.

EvoPac VOLTA WINDOWS window and door wrapping machine was built in 2020 in Italy by EvoPac S.r.l. The machine is used for wrapping windows and doors of various dimensions with stretch film. Such protection minimises the risk of damage to the load during transport, as well as protects it from weather conditions. High performance, combined with state-of-the-art technical solutions, makes it a great solution for companies specialising in the manufacture and transport of windows and doors. The process begins with the loading of the product onto a turntable with an integrated roller conveyor. The pneumatic grippers, controlled by a foot switch, automatically adjust to the size of the product, thus ensuring high process stability. The stretch film is unwound simultaneously with the rotation of the work table and the load placed on it. At the end of the cycle, the EvoPac VOLTA WINDOWS automa ...

ECKERT AGAT SPEED oxy-fuel cutting machine was built in 2020 in Poland by ECKERT AS Sp. z o.o. The machine is used for thermal cutting of workpieces with a maximum thickness of 100 mm. The machining process is performed by means of a reliable oxyfuel torch according to pre-programmed cutting programmes or by manually controlling the cutting path. Workpieces machined in this way stand out for their perfectly smooth and even edges, regardless of the type of material. The open design of the machine, on the other hand, ensures free access to the work area from all sides, as well as excellent stability during even the most demanding challenges. The AGAT SPEED oxyfuel cutting machine is offered with an extensive equipment, consisting of, among others, the ECS 872 intelligent CNC controller and an oxygen torch support with capacitive distance sensor. Technical specifications of the ECKERT AG ...

Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.

1 BARUDAN double head embroidery machine type BEAT-802T-YS, 2 heads, 7 needles each head, with driver unit SDV-I, BARUDAN SMT keyboard

Control Fanuc 32i-TB Main spindle: Motor spindle technology Speed (max.) 6,500 rpm Power (max.) 7.5 kW Bar passage 38 mm Travel in Z (longitudinal turning operation) 320 mm Workpiece Clamping Collet Chuck (Type F48) Guide Bush Synchronous Running Sub-spindle: Motor spindle technology Speed (max.) 6,500 rpm Power (max.) 5.5 kW Workpiece Clamping Collet Chuck (Type F48) Pneumatic ejector Linear slides: Number of lathe chisel stations 5 Tool holder 16 x 16 mm/ 20 x 20 mm Number of stations cross drilling rig 5 Tool holder ER16/ER20 Tool drive 6,000 rpm, 2.2 kW Cross slide: Number of stations 2 Tool holder ER16 Milling operations tool drive Residual apparatus: Number of stations 8 Tool holder Ø32 mm Number of driven stations 4 Tool holder ER16 Tool drive 6,000 rpm, 1 kW Equipment/accessories: Chip Management Chip Conveyor Coolant system IKZ syste ...

Gear wheel for mould height adjustment, die casting machine OL1200, Oleopress, new For the aluminium die-casting machine OL1200 from Oleopress, This gear drives the adjusting nut on the column. Special price -50% of the original price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. This gear drives the adjusting nut on the column.

CNC lathe DMG MORI ecoTurn 450 With Siemens 840 D SLIMline controller Year of Make: 2016 Max. rotatable diameter: 315 mm Wheelbase: 685 mm Travel X : 224 mm Travel Z : 600 mm Spindle bore: 91 mm Max. spindle speed: 4000 rpm With the following accessories: Slide protection with interior lighting 12-speed turret with 12 driven stations C axis , Y axis +/- 50 mm 5 pcs of VDI 40 powered tools 60 VDI 40 tool holders Hydraulic Collet Chuck HAINBUCH with Foot Switch Tool measuring device in the work area Workpiece pick-up device Tailstock with quill Signal light 4 colour Chip conveyor Rinsing gun Coolant device with reinforced pump 20 bar Operating Instructions

Complete production line for bevel gears, consisting of 6 bevel gear milling machines Klingelnberg BF 201 including orders for contract work for sale Technical data Diameter: 240 mm Module: 10 mm Tooth width: 60 mm Dimensions: 2.3 x 2 x 1.7 m Machine weight: approx. 6,700 kg Information and data are non-binding, subject to prior sale Special features: Complete production line consisting of 6 machines with the following accessories: - Bevel gear machine - 1x interchangeable gear set - 1x test block - Mounts (proportionate) - Knife set (proportionate) - Documentation (1xOriginal / data set) Furthermore, contract gear orders could follow, catalogue goods and special bevel gear sets according to customer specifications, complete volume approx. 8,000 components / year. Asking price of the seller 18.000.- VB / per machine

Bausch + Ströbel ESA1001 self-adhesive labeller for ampoules, vials, etc., suitable for containers from 6mm to 36mm diameter, and from 20mm up to 140mm high. Includes format parts for Ø 9,75 x 48 mm high, Output depending on size of container and label up to 15,000 per hour. In 2019 the following upgrades were completed: - New Siemens S7-1500 PLC controller - Centralised touch-screen HMI for control of all parameters - Servo-drive for the label feed - New integrated DC drives and absolute encoder - upgraded safety circuit and guarding to the latest standards

Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462  ...

Lamello Milling Machine Olma Stationary L x W x H: 1.0 x 0.7x 1.5 m Built in 1973 Weight approx. 350 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

BaumannPerfecta 115 Age: 2022, installed 12/2022 Available: April 2026 • 24" tiltable color display touch screen • Process visualization, real time Animation and displaying half and full finished jobs • Program steps in self‐explaining list • Electronically adjustable backgauge speed and clamp pressure • Automatic clamp pressure adjustment • Pre‐selectable clamping time extension‐ 0 to 9,9 seconds • Integration of Prepress data CIP3/CIP4 from existing customer workflow (option) • Structure of the surface in simple operating mode, list mode, graphic mode • Password protected user accounts • Comprehensive diagnosis / service area Cutting table width [mm] 1150 Rear table length [mm] 1150 Maximum clamp opening [mm] 165 Smallest cut/ with false clamp [mm] 20/77 Backgauge return speed [mm/s] 300 Cclamping force [kN] 2.5‐45 Safety p ...

Condition: Very good condition

The mobile spiral mixer: optimal mixing results even with very small quantities; max. 80 kg dough / 50 kg. flour; bowl, spiral and guard from stainless steel ; two speeds; wheat, mixed wheat, mixed rye, rye doughs; power: 2.6 / 3.2 kW / 380V

Used cutting machine Hundegger K2 Manufacturer: Hundegger, DE Type: K2 Built: 2000 Condition: used, in operation, very good Consisting of: 1. Fully automatic wood conveying with feed roller conveyor and feed and feeding cross conveyor Consisting of a roller conveyor with cross-over from the cross conveyor with 5 strands equipped with hinge tape chains, which ensure injury-free transport Length: 9.2 m, Width: 2.2 m 2. Lower table swivel crosscut saw with 4-axis control With a carbide saw blade of 740 mm (11.0 KW) max. saw cutting depth: 300mm at 90° infinitely adjustable machining stroke with positioning drive pivotable 0- 360°, inclination 0-65°, drive servo-hydraulic, With this aggregate, all saw cuts, such as angles and shitging sections, longitudinal sections for burring and lruning, hewing or stash sections) are executed. Thanks to the 4-axis control, witch  ...

Burgener ISPV-3-1100-2 semi-automatic bag welding machine for closing bags made of PE, paper or aluminium laminated, bag width max. 1050 mm, bag protrusion above product min. 120 mm, vacuuming and purging of the bags, machine in mobile execution on wheels, electrics 3x400VAC/N/PE, Leistung max. 1.5 kW, compressed air max. 6 bar, inert gas max. 4 bar, machine floor space approx. 2000 x 1590 mm (Depth x Width), machine height approx. 2400 mm, machine net weight approx. 250 kg

AGIE CHARMILLES FORM 400 vP die-sinking EDM was built in 2012 in Switzerland by Agie Charmilles SA. The machine is used in the production of, among others, precision dies, punches and tools. Workpieces with a maximum weight of 3000 kg are machined by means of electrical erosion, which enables complex shapes to be made in even the hardest materials. Workpieces machined in this way also do not require other secondary processes to be undertaken, such as polishing. Extensive equipment is included in the offer price, consisting of, among others, an intelligent control system, a measuring probe and a special iQ module that minimises electrode wear. The AGIE CHARMILLES FORM sinker EDM weighs 7014 kg. Technical specifications of the AGIE CHARMILLES FORM 400 vP die-sinking EDM - number of axes: 4 (X,Y,Z,C) - feed in the X/Y/Z axis: 900/700/500 mm - work table dimensions (L x W): 1100 x 900  ...

ID3737 Nordmeyer on Unimog Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled in the last 3 years for approx. €40,000 (power swivel, hydraulic pumps, main gearbox for engine overhauled, new flushing pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm Well drilling rig, Nordmeyer? on Unimog, single-stage pump, equipment overhauled the last 3 years for about 40,000 euros (power turntable, hydraulic pumps, main gearbox for engine overhauled, new mud pump), everything works, drilled with it so far: 100 m depth - 152 mm, 60 m depth - 325 mm