141,126 used machines on RESALE, but how to find them? Machine Search
UV dryer, UV lamp, high-performance UV lamp -the lamps come from a UV paint drying process -Working width: 1400 mm -Double housing -UV range: 180 - 450 nm -UV tube type: CK 110/80 - Radiator power: 80 W/cm² -Quantity: 3x dryer lamps, each with 2 tubes included Price: per piece -Transformers and accessories: available at extra cost (2x ID13948 and 2x ID13949 or ID13950) -Dimensions: 1720/400/H630 mm -Weight: 126 kg/piece
Air tube bundle extractor, air tube bundle assembly station for heat exchangers, cooling coil, cooling pipe, cooling spiral, tube bundle heat exchanger -Handover: in its current condition as inspected (without documentation) -Condition: Diesel engine currently out of service -Air tube bundle extractor: Hydro-Extractors INC -Type: 504- Diesel -Dimensions: 8400/1900/H2850 mm -Transport dimensions: 8400/1900/H1700 mm -Weight: 6860 kg
Stock number: A202, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 2 pcs., Item: Tube heat exchanger, Construction: Lying on legs, Amount of tubes: 127 pcs. , Product tube diameter: Ø 1, Heating surface: App. 20 m²
Type of Machine : VORTEX MIXER W/ STDTUBE HEAD 230V , TESTED TO IEC 61010-1, 230V. 50Hz. 0.3A Quantity : 1 unit Year of construction : 3/15/2022 PLEASE CONTACT JESCICA TAN : 012-6062305 ( MALAYSIA NUMBER) Located at Factory F33
Offer 26174 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Wall thickness up to 3.25 mm - Max. bending radius 180 mm - Bending speed 20 °/sec. - Drive 400 V / 2.4 kW - Space requirement approx. W 6200 x H 1200 x D 1000 mm - Weight approx. 1100 kg - Operating hours read 972 h -with - Digital bending angle display + bending angle fine adjustment - With control SIEMENS SIMATEC Touch Panel - Mandrel bending device 4.5 m. with hydr. Withdrawal - Sawing unit - Deburring unit for internal and external deburring - Pipe positioning system - Bending tools without mandrels - 6 ,8 , 10 , 12 , 16 , 20 , 22 , 28 , 30 mm , - Partly possibly incomplete
Cutting range round: 12-273mm, square: 12-200x12-200mm, rectangular diagonal: less than or equal to 273mm, profile cutting: U-, L- and H-profiles with flange lengths less than or equal to 180mm, maximum weight of a single tube: 200kg, remnant length (tailing): greater than or equal to 150mm, maximum manual loading length: 7100mm, maximum acceleration: 1.2G, maximum travel speed: 120m/min, positioning accuracy: +/-0.03mm/m, machine dimensions (with loader): 12,500x4,700x2,600mm. Equipment: Raycus 3 kW laser source, HSG Blade laser cutting head, Rexroth/SANYO DENKI/Inovance servo motor, Shimpo rack-and-pinion drive, linear guide, HSG machine platform, HSG automatic self-centering chuck, HSG X9000 control system, TTN nesting software, MOOXEE/Lanny proportional cutting gas valve (6kW), water chiller and installation kit, with documentation. The machine has not been used and an on-site inspec ...
Tube heaters Manufacturer: Ahrens & Bode Pressure-resistant up to 25 bar
: neu : 2026 : 090209 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm tube diameter: 35,0 x 1,5 EDELST mm bending radius min.: R10 - R 190 mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description: - MediBender 070 digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS ...
tube diameter: 273 mm wall strength: 15,1 mm bending radius min.: 150 mm bending radius max.: 1250 mm total power requirement: 30 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: R10-R260 bending speed: 2,5 U/min : 54,0 x 2 mm Sheet thickness aluminum: 54,0 x 2 mm : 42,4 x 3 mm sheet thickness for stainless steel: 42,4 x 2 mm : 30 mm : einphasig - 230 V drive motor: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 363 x 900 x 595 mm ‘ERCOLINA MEDI BENDER’ Single-phase mandrel-less bending machine up to 42 mm Features: - Control system: Soft-touch control panel in 8 different languages - Number of programs: 30, each with 9 bends - Standard accessories (including foot switch, user manual) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional ...
tube diameter: 60.3 x 4.5 mm ST tube diameter: 60.3 x 5.4 mm ALU tube diameter: 2 x 3.91 mm GAS bar material - diameter: 35.0 mm revolutions per minute: 2.0 U/min bending radius min.: 10.0 mm bending radius max.: 270 mm external diameter: min. 5.0 mm external diameter: min. 1/8 Zoll voltage: 230 V total power requirement: 1.5 kW weight: 76.0 kg range L-W-H: 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model M = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
width of the strips: 150 mm band length: 2000 mm band speed: 1400 / 2800 U/min tube diameter: 40 - 140 mm voltage: 380 V total power requirement: 3.0 kW weight of the machine ca.: 360 kg. Exhibition machine - like NEW not yet in use () New price approx. 6.500 euros Special price on request - Machine video - identical machine - https://www.youtube.com/watch?v=LXP09NFTnlw&t=1s The FALKEN PN 38/140 is a multifunctional grinding machine for grinding pipe and profile ends Equipment: - robust electro-motor pipe profile grinding machine - enables notches up to an angle of 50° - large-dimensioned surface grinding surface with protective cover - 2x belt speeds - control panel, front left - including emergency stop button - grinding belt can be replaced quickly and easily - vice movement to the right - left, forwards & backwards possible - side grinding dust collection container - horizontal ...
tube diameter: 16.0 - 90.0 mm width of the strips: 100 mm band length: 1250 mm grinding band dimension: 100 x 1250 mm total power requirement: 2.2 kW weight of the machine ca.: 180 kg. range L-W-H: 1200 x 600 x 1150 mm Exhibition machine - like NEW not yet in use () New price approx. 4.500 euros Special price on request The PN 17/90 is a grinding machine for grinding pipe and profile ends on the front. Equipment: - electro-motor grinding machine for pipe and profile ends - 10x grinding rollers included in delivery incl. storage area - rear of the machine - simple manual clamping/opening of the material - lateral adjustment of the material clamping system - grinding up to 50° degrees possible - machine base - collecting tray for easy emptying of grinding dust - EMERGENCY OFF button at the front - front privacy screen made of plexiglass - side transport bags for easy transport The ...
: neu : ca. 12 Wochen ab Auftrags : Türkei : 11300 € : 216.96 € : 5 kW : 265 kg : 10-114 mm : 2 : 3-22 m/s : (2x) 50 x 940 mm to grind and polish for round and oval tubes opening of sanding belts by footpedal machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
tube: 6000 mm tube diameter: 42 x 3,0 mm wall strength: 3,0 mm bending radius min.: 150 mm total power requirement: 5,5 kW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 7500 x 1.400 x 1.300 m Round steel tube: up to Ø 42 × 3.0 mm Round stainless steel tube: up to Ø 42 × 2.0 mm Square tube: 25 × 2.5 mm Max. section modulus: 4.1 cm³ Bending angle: up to 180° + 10° overbending Bending time at 90°: 2.7 sec. (forward stroke) Longitudinal feed speed: 450 mm / 1.5 sec. Rotary positioning speed at 90°: 1.0 sec. Repeatability of bending axis: ± 0.2° Controlled length tolerance: ± 0.3 mm Controlled rotation tolerance: ± 0.2° Tube loading length / usable length for mandrel bending: 4,100 mm Max. radius range: 150 mm Bending height: 850 mm Free-standing bending head: 850 mm long Bending axis drive: electro-hydraulic Rotation and length positioning: automatic via gear ...
PRODUCT (PROFILE, TUBE) external diameter min.: 25 mm external diameter max.: 76 mm wall thickness min.: 0.7 mm wall thickness max.: 3.25 mm LINE CHARACTERISTICS welding process: HF inductive sawing process: travelling speed max.: 100 m/min ELECTRICAL SPECIFICATIONS mains power supply: 680 kVA Technical data & highlights: System length: approx. 130 m Staff requirements: 6 employees for operation Welding process: High-frequency welding up to 400 kHz Induction welding process: Power up to 250 kW Advantages: Robust and reliable design – suitable for continuous industrial operation Precise welding quality thanks to state-of-the-art high-frequency technology Ideal for manufacturing pipes in various dimensions -Pipe welding machine: Abbey Etna -Strip processing + saw VAi Seuthe -Rolling mill Carl Wetzel -Induction welding system: Rittal SK3215.100, built in 2 ...
FEEDSTOCK TUBE external diameter max.: 90 mm lenght max.: 14000 mm CHARACTERISTICS DRAWING MACHINE force: 250 kN number of parallel trains / strands max.: 3 For Sale: High-Performance Triple Drawing Bench GKZ 250 / 3-19R – Precision, Power & Reliability Offered for sale is a Triple Drawing Bench, type GKZ 250 / 3-19R, manufactured by Bültmann Maschinenbau GmbH & Co. KG, a renowned German company known for high-quality tube drawing technology. This system stands out for its robust design, impressive pulling force, and flexible adaptability for a wide range of tube dimensions and materials. Technical Data Year of Manufacture: 1987 Manufacturer: Bültmann Maschinenbau GmbH & Co. KG Location: Hall 7 / 8 Floor Space: 6 x 35.5 m = 213 m² Installed Power: 355 kW Operating Personnel: 1 person Performance Specifications Number of Tubes per Draw: 1, 2 or 3 Input Tube Outer Di ...
tube diameter: 406.4 - 1625.6 mm wall strength: 9 - 60 mm bending radius min.: - mm pressure: 10000 t tube: 8000 - 12000 / 16000 mm Plate thickness: 9 - 60 mm distance between columns: mm control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The HYUNDAI-WIA JCO Press Bending Machine is a heavy-duty industrial hydraulic press used to form large-diameter, longitudinally seam-welded (LSAW) steel pipes. Sequential Shaping: The machine bends a flat steel plate step-by-step into a pipe shape. It first presses the edges into a J shape, then curves them further into a C shape, and finally closes them into an O shape • Year of Modernization: 2025 1. Edge Milling Machine 2. Pre Bending Machine 3. In Feeder 4. JCO Press Bending Machine 5. Tack Welding Machne 6. Insdie Welding Machine 7. Outside Welding Machine 8. 4-way (Inpending) Machine 9. End Facin ...
: gebraucht : 2019 : 5505 : prompt, Zwischenverkauf v : Niederlande : 2670 € : 1 : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 3 kW : 190 kg DEMO MACHINE / MINT CONDITION The lever operated AL100U-01 can grind material from Ø 20 mm to Ø 76.1 mm. Its compound slide and carriage with rotatable clamp are continually adjustable allowing the machine to grind all pipe sections at any angle between 30° and 90°. The ALMI AL100U-01 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system simplifies tensioning the grinding belt. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are equipped with a deburring table. Incl. 5 pcs. grinding belts, 1 ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 6352 € : 122.59 € : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The AL150 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150 can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds.All pipe ...
: neu : ca. 2 - 4 Wochen ab Auftr : Niederlande : 7733 € : 149.25 € : 1 : 150 x 2.000 mm : 20 - 114,3 mm : 1 : 1 : 4 kW : 270 kg The new AL150HS 2 in 1 machine: grinding belt and pipe grinder. High Speed Belt thanks to a unique transmission, up to 150ft/per second. The Benefits of the AL150HS: less dust/particules, less change of colour and longer belt life (2 to 3 times) due to high speed. The AL150HS can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL150HS can be used to grind material from Ø 20 mm tot Ø 114.3 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL150HS can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary type ...
This HGTECH TP 6535 PLUS was manufactured in 2024. It is a fiber CNC cutting laser designed for cutting pipes, tubes, and both closed and open profiles. It operates with power ranging from 1 to 6 kW and can handle pipes up to 8.5 meters long and 280 mm in diameter. Contact us for more information about this machine.
: neu : ca. 2 Wochen ab Auftragse : Niederlande : 4785 € : 100 x 2.000 mm : 20 - 76,1 mm : 1 : 1 : 3 kW : 220 kg The AL100U-02 can be operated with two hand-wheels or a lever. The machine is equipped with both options. The AL100 U-02 can grind material from Ø 20 mm to Ø 76 mm. The compound slide and carriage with rotatable clamp are continually adjustable, which means the machine can grind all pipe sections at every required angle between 30° and 90°. The ALMI AL100U-02 can be used to grind square, rectangular and round pipes with a range of wall thicknesses and is suitable for all customary types of materials. ALMI’s belt tensioning system makes tensioning the grinding belt even easier. The belt is tensioned using the hexagonal spanner supplied with the machine. The grinding belt can be tensioned quickly and the grinding rollers can be changed in seconds. All pipe grinders are e ...
Tube Filling & Sealing Machine (Plastic) Manufacturer: SpeMaBa/Gustav Obermeyer Type: TUFÜBA 40 PE Year of Make: 2006 • For plastic tubes (HDPL, LLDPL) • Welding by hot air • 9 tube holder stations • Capacity max. 40 tubes/min • For tube Ø 9-50 mm depending on tube holder format set • Tube height 60-240 mm • Dosage 20-220 ml depending on the dosing pump • 1 rotary vane dosing pump 10-100 ml (1 additional as a replacement) • Tube feed magazine • Filling funnel with agitator, heatable with heating/cooling unit • Print mark control (alignment of the tube to the printed image) • Embossing 1-line • 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm • PLC Siemens S7-300 • Connection 400V/50Hz • Has worked in line with upstream tube labeling machine 05-0179
: neu : ca. 4 Wochen ab Auftragse : Italien : 10900 € : 209.28 € : 60 mm : 595 mm : 363 mm : 900 mm : 130 kg : 10.5 cm³ : 60 x 3 mm : 2Gas x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 4 mm : 60 x 4 mm : 64 x 4 mm : 64 x 4 mm : 60 x 4 mm : 50 x 4 mm : 35 mm : 60x30x4 stehend, 60x40x5 mm : 300 mm : 10 mm : 10 mm : 1,25 / 2,50 U/min : 1.5 kW digital read out for bending angle manual clamping material spring back compensation digital read out and zero setting for clamping point 2 speeds overload protection mobile by rolls and handle tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 12460 € : 239.23 € : 60 mm : 500 mm : 760 mm : 1000 mm : 186 kg : 10 cm³ : 60 x 4 mm : 2 x 3,91 mm : 60 x 4 mm : 60 x 2 mm : 60 x 3 mm : 60 x 6 mm : 64 x 6 mm : 64 x 6 mm : 63 x 4 mm : 50 x 4 mm : 35 mm : 35 x 35 mm : 60 x 20 stehend, 60 x 35 mm : 380 mm : 10 mm : 10 mm : 1,5 / 3 U/min : 1.5 kW quick-change tooling system digital display of bending angle material spring back compensation foot pedal for hands-free operation accurate counterbending die positioning users manual tools not included, priced on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 29100 € : 555.81 € : 100 mm : 500 mm : 1200 mm : 850 mm : 480 kg : 43 cm³ : 100 x 6 mm : 3 1/2 x 4 mm : 100 x 6 mm : 100 x 3,6 mm : 100 x 3,6 mm : 114,3 x 6,3 mm : 114,3 x 6,3 mm : 114,4 x 6,3 mm : 88,9 x 3,65 mm : 100 x 5 mm : 70 mm : 100 x 25 stehend, 100 x 5 mm : 400 mm : 36 mm : 10 mm : 0 - 1,3 U/min : 3.5 kW quick-change tooling system digital display of bend material spring back compensation remote control of bend, return and emergency stop functions accurate counterbending die positioning footswitch 3 hexagonal tool holders heavy-duty steel gear case users manaul tools not included, prices on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 8 Wochen ab Auftragse : Italien : 39500 € : 754.45 € : 127 mm : 850 mm : 1200 mm : 850 mm : 720 kg : 80 cm³ : 127 x 7,1 mm : 4 x 8,56 mm : 127 x 7,1 mm : 114,3 x 5,6 mm : 114,3 x 5,6 mm : 139,7 x 8,8 mm : 139,7 x 8,8 mm : 64 x 6 mm : 88,9 x 3,65 mm : 50 x 4 mm : 90 mm : 130 x 25 stehend, 130 x 6 mm : 700 mm : 36 mm : 10 mm : 0 - 0,75 U/min : 3.5 kW digital read out for bending angle 4 hexagonal tool holders (40, 50 80 and 110 mm) Possibility to bend left and right Users manaul Tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Italien : 106340 € : 2009.83 € : 150 mm : 1000 mm : 1900 mm : 1475 mm : 2700 kg : 170 cm³ : 150 x 7,1 mm : 6 x 7,11 mm : 150 x 9 mm : 141,3 x 6,55 mm : 141,3 x 6,55 mm : 168,3 x 9 mm : 168,3 x 9 mm : 64 x 6 mm : 88,9 x 3,65 mm : 110 mm : 150 x 45 stehend, 150 x 6 mm : 800 mm : 100 mm : 10 mm : 1 U/min : 15 kW TCPlus Control with 7 Touchscreen Programmable bending speed for each individual bend Possibility to bend left and right Users manaul The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 4 Wochen ab Auftragse : Italien : 9340 € : 180.26 € : 48 mm : 570 mm : 410 mm : 1000 mm : 110 kg : 6 cm³ : 48 x 3,5 mm : 11/2 x 3.68 mm : 54 x 1,5 mm : 50 x 4 mm : 48 x 2 mm : 48 x 2 mm : 60 x 3 mm : 64 x 2 mm : 64 x 2 mm : 60 x 2 mm : 50 x 4 mm : 32 mm : 45 x 16 stehend, 45 x 25 mm : 300 mm : 10 mm : 10 mm : 2/3 U/min : 1.5 kW 3 phase digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders accurate counterbending die positioning portable with base wheels footswitch users manual ALTERNATIVELY ALSO AVAILABLE AS FOLOWING MODEL (PRICE ON REQUEST): SB 48M (single phase, 2 r/min) Model with TCPlus control on request MACHINE-KIT WITH TOOLS (PRICES ON REQUEST): Art.Nr. maschine tube radius SB 48M K2D SB 48M Gas inch 2 x Ø SB 48T K2D SB 48T Gas inch 2 x Ø tools: Ø 1/2", (21,3 mm), R46 Ø 3/4", (26,9 mm), R56 Ø ...
: neu : ca. 8 Wochen ab Auftragse : Italien : 14020 € : 269.18 € : 76 mm : 370 mm : 680 mm : 910 mm : 193 kg : 15 cm³ : 76 x 3 mm : 2 x 5,4 mm : 76 x 3 mm : 70 x 4 mm : 76 x 1,6 mm : 76 x 4 mm : 76 x 6 mm : 76 x 6 mm : 76,3 x 3,25 mm : 50 x 4 mm : 45 mm : 75 x 15 stehend, 75 x 30 mm : 380 mm : 10 mm : 10 mm : 1/2 U/min : 3.5 kW digital display of bend material spring back compensation quick-change tooling system 2 hexagonal tool holders (40 and 50 mm accurate counterbending die positioning foot pedal users manual tools not included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Tube Packing Machine Manufacturer: TRANSNOVA-RUF / ABB Type Robot Packer Hours 3630 Very good condition Current setting 100 tubes /min Documentation available
Additional technical specifications: • Bending capacity: 20 - 60 mm
The tube processing machine is mounted on a mobile base frame.
CONTROLS PLC SIEMENS SIMATIC FEEDSTOCK TUBE external diameter min.: 15 mm external diameter max.: 70 mm wall thickness min.: 1 mm wall thickness max.: 5 mm lenght max.: 7000 mm PRODUCT (PROFILE, TUBE) length min.: 100 mm lenght max.: 1000 mm ELECTRICAL SPECIFICATIONS total power consumption: 7.5 kW Components: - RASACUT SC - Tube feeding system 1000 - RASAFAS 1000 - RASAPLAN XY 1000 - RASACHECK 1000 - RASACLEAN ET / Turbodry 1000 - Dust extractor
A CNC 10 axis pipe cutting system HGG including a plasma source Kjellberg HiFocus 280i is available. Pipe diameter range: 30mm-330mm, max. pipe load: 20kN, max. pipe length: 13000mm, max. workpiece weight: 2000kg, max. cutting angle: 70°, max. plasma cutting current: 280A. Documentation available. An on site inspection is possible.
CONTROLS conventional FEEDSTOCK STEEL STRIP sheet thickness max.: 3 mm PRODUCT (PROFILE, TUBE) external diameter max.: 139 mm ROLL FORMING LINE P110K I am providing the list of profiles and tubes that we used to manufacture on the TEGALNIK P110K line! Open cold-rolled steel profiles made from cold-rolled (CR) and hot-rolled (HR) strip: Steel angle profiles (Equal angles): • 15 x 15 x 1.5 mm • 20 x 20 x 1.5 mm • 20 x 20 x 2 mm • 25 x 25 x 3 mm • 30 x 30 x 3 mm Steel U channels: (Width x Height x Thickness) • 10 x 15 x 1.5 mm • 15 x 15 x 1.5 mm • 18 x 20 x 1.5 mm • 20 x 20 x 1.5 mm • 25 x 20 x 2 mm • 25 x 25 x 2 mm • 30 x 20 x 2 mm After modifying the machine, we also manufactured welded stainless steel tubes in the following dimensions using a special process: Round stainless steel tubes: • ø 16 x 1.5 mm • ø 18 x 1.5 mm • ø 20 x 1.5 mm • ø ...
tube diameter: 6 - 42 mm wall strength: 3 mm bending radius min.: 180 mm bending radius max.: 5 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Equipment: Saw unit Notching unit Deburring unit for internal and external edges Flaring unit / flaring function (necking / expanding) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CONTROLS PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE external diameter min.: 8 mm external diameter max.: 90 mm Round tube min. 8 mm max. 90 mm Square tube min. 8x8 mm max. 80x80 mm Rectangular tube min. 15x10 mm max. 60x85 mm
This 3-axis ESAB SUPRAREX 3100 SXE was manufactured in 2020. It features high-definition plasma cutting technology with a maximum tube length of 8,000 mm and a maximum tube diameter of 750 mm. The machine includes advanced bevel cutting capabilities and a robust construction with precision guides. If you are looking to get high-quality tube cutting capabilities, consider the ESAB SUPRAREX 3100 SXE tube cutting machine we have for sale. Contact us for further details.
USED HYDRAULIC TUBE LNS 6/68 HS 4.4 Serial No.: 37456 Dimensions and weight 5000x800xH1500mm - weight 900 kg Auction-ID: A1-50950-39
Manufacturer: Nabertherm Model: RSRC 470/270/13S Year of Manufacture: 2019 Type of Machine : Large-diameter tube furnace Technical Specifications: - Maximum pipe diameter: 470 mm - Heated length: 2700 mm - Number of heating zones: 3 - Furnace chamber dimensions: 670 x 2700 x 670 mm - Maximum temperature: 1300 degrees C - Operating temperature: 1250 degrees C - Rotation control range: 1 to 5 rpm - Electrical power: approximately 120 kW - Nominal voltage: 400 VAC - Connection power: 120 kW/kVA - Outer dimensions (L x W x H): 3150 x 1560 x 1155 mm (without base frame) - Weight: under 3000 kg - Documentation: EC declaration of conformity and operating instructions included Find more here - .ucymachines/ Contact us at - sales@ucymachines
Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg
maximum number of results exceeded
please refine your search
2.500 € 
