sheet used for sale

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,0 mm Positions ATC: 0   SPECIFICATIONS Controll   Conventionel   Hydraulic / Mechanical   Hydraulic Capacity Ø x plate thickness  Ø  6 - 42 mm Cutting lenght   L = 6.000 mm mm DIMENSIONS Length   7000 mm Width  1500 mm Height  1500 mm Tubomat 642 bending centre for processing pipes. You can do also Sawing, Deburring, flaring. Tubomat is belonging to the company Tracto technik who is specialised in tube bending machines like the tubomat and tubobend, tubotron.  

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 8,0 mm Positions ATC: 0   Make Eckold KF 665 Type KF 665 Year 90 er Kraftformer Forming = 8 mm Ram = 0 - 80 mm Speed = 150 / 300 / 600- Model with Potentiometer; limits reverse motion time - Foot switch for motorised adjustment ram - 1 machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening

sheet width: 2570 mm plate thickness: 2,5 mm pre-bending capacity: 1,8 mm diameter of upper rolls: 140 mm total power requirement: 2,2 KW weight of the machine ca.: 1,93 t dimensions of the machine ca.: 3730 x 800 x 1100 mm Basic equipment: - Conical bending device - Swiveling top roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Electrically adjustable rear roller Digital display for rear roller Hardened rollers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet thickness: 50mm, drilling diameter: 10-40mm, type of burner: autogenous, table dimensions: 1000x6000mm, connected load: 12kW, length: 10,700mm, width: 3200mm, height: 3000mm, weight: 6.5t, with Extraction Kemper STSTEM 8000, a visit is possible.

sheet width: 2570 mm plate thickness: 6 mm pre-bending: 8 mm diameter of upper rolls: 210 mm roll diam. bottom roll: 190 mm speed: 5 m/min total power requirement: 7,5 KW weight of the machine ca.: 4,67 t dimensions of the machine ca.: 3,9 x 1,4 x 1,25 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for 600 x 800 mm baking trays with lubrication with sheet metal recirculation

With oiling; 5 brushes; with sheet metal storage trolley; Analog control; Stainless steel

sheet width: 1000 mm plate thickness: 8,0 mm distance between columns: 1070 mm diameter of upper rolls: 150 mm pre-bending capacity: 6,o mm connected load: 4,0 kW weight of the machine ca.: 1,4 t dimensions of the machine ca.: 2,6 x 0,65 x 1,1 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mm material thickness: 2,0 mm : max. 90° Grad weight: 12 Kg dimensions: 400 x 250 x 100 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pneum. Corner notching machine make EDEL type EP 950Fabr. -No: 24958377, year of construction 1983Cutting length: 200 x 200 mmCutting angle: 90 °Max. Sheet thickness: 4 mmAir consumption per stroke: 70 lWeight: 330 kgExternal dimensions: 800 x 700 x 1500 mmWith- Lutwartungseinheitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal straightening machine make UNGERER type RM 300/2/23Machine -No: 5507 built in 1961Material width: 300 mmMaterial thickness: 2.0 mmNumber of Straightening Rollers: 25Standard roll diameter: 23 mmWeight approx: 2 tExternal dimensions: 200 x 900 x 1700 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal straightening machine make SCHLEICHER type RMC 6-40-96 / 300Machine -No: 5185/1411, built in 1994Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 0.5 mmDrive power: 1.7 kWWith- 3 pairs of straightening rollers- 1 pair of feed rollers- Loop control- Contact pressure of the feed rollers adjustable- Remote control for setup modeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Part leveler / leveling machine make GRÖTZINGER type R 3509Machine -No: 7210Max. Bandwidth: 350 mmMax. Sheet thickness: 4.0 mmNumber of rollers: 6Number of feed rollers: 2Diameter of the rolls: 70 mmExternal dimensions approx: 1500 x 1800 x 1600 mmMotor power: 3.0 kW, 380 VWith- Footswitch- Forward and return stroke by turning foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet straightening machine make SCHUBERT type WM 19/18/220Machine -No: 700616 built in 1985Technical specifications:Material width: 220 mmNumber of straightening rollers: 19Straightening roller diameter: 18 mmExternal dimensions approx.: 1400 x 900 x 1350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic Bending Machine Fabr. STROJARNE - PIESOK Type XONM 2000 / 2A - 2Machine -No: 237-516-1978, built in 1978Working length: 2050 mmMax. Sheet thickness: 2.0 mmbend to: 135 °Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower cheek: 100 mmStroke of bending beam: 100 mmDrive power: 2.2 kWWeight approx: 2800 kgExternal dimensions approx: 3000 x 800 x 1600 mmWith- Separate hydraulic system- adjustable bending angleused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make ALBERT STAHL type ABE 400/6Machine -No: 722144 built in 1972Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmDimensions L x W x H approx.: 4000 x 1800 x 1500 mmWeight approx: 5 tWith- additional rail- 5-way foot control- manual backgaugein good, used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic folding machine make STROJARNE - PIESOK type XONM 2000/2Technical specifications:Working length: 2050mmMax. sheet thickness: 2.0 mmbend up to:135°Bending time: 3.5 sec.Stroke of the upper beam: 250 mmStroke of the lower beam: 100 mmStroke of the bending beam: 100 mmDrive power: 2.2 kWWeight approx.: 2800 kgExternal dimensions approx.: 3000 x 800 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual folding machine make FASTI type 206/5-20-2.0Machine -No: 7126061, built in 1971with additional motorized upper beam adjustmentTechnical specifications:max. working length: 2040 mmMax. sheet thickness: 2.0 mmStroke of the upper beam: 200 mmAdjustability of the lower and bending beam: 80 mmWeight approx.: 1830 kgWith- counterweight- motorized upper beam adjustment (without function)- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual folding machine made by BERNACKTechnical specifications:Max. Working length: 1000 mmMax. Sheet thickness: 2.0 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Construction folding machine make CIDAN type BA 200Masch. -No: 18127/02 built in 1999especially suitable for use on construction sitesin all-welded steel constructionTechnical specifications:Working length: 2050 mmMax. Sheet thickness 160 N / mm2 Titanium zinc DIN 17770: 0.8 mmStroke of the upper beam: 75 mmBending beam thickness: 15 mmOutside dimensions approx: 2350 x 275 x 1100 mmWeight approx: 160 kgused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual sheet metal shears make PEXTO type 137 / LMachine -No: 10/70Technical specifications:Cutting length: 1020 mmCutting thickness normal steel: 1.6 mmTable width: 300 mmWith- 2 extension arms 600 mm- foot disengagementused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

sheet width: 3000 mm plate thickness: 12 mm pre-bending: 10 mn number of rolls: 4 Walzen diameter of upper rolls: 320 mm roll diam. bottom roll: 250 mm speed: 1,5 - 5 m/min total power requirement: 20,0 kW weight of the machine ca.: 13,05 t dimensions of the machine ca.: 5,9 x 2,05 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm engine output: 2,2 kW bending speed: 5,3 m/min weight: 1360 kg range L-W-H: 2.320 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Min-max cutting width: 250-1150 mm Max reel width: 1200 mm Reel weight: 1100 kg Internal core: 70/76 Max reel diameter: 1050 mm Max speed: 195 m/min Power 400 V, 50 Hz Air 6 bars Double reel unwinder Double photocell/register control Touch screen control panel for cutting on size starting from reel to sheet Materials: ALU, plastic film, paper from 10 to 250 grs, laminates and tissue paper, paper + cardboard, adhesives, shoppers paper, gift paper, offset paper, wrapping paper for pastry, washing etc.. plastic film from 30 to 200 my like PE, pvc, PP, polyester, celluloid, others Electronic counter of pieces

sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 67700 € : 1354 € : 3100 mm : 10 mm : 10 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1460 mm : 1550 mm : 7500 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52100 € : 1042 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 3750 mm : 1180 mm : 1300 mm : 4000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad wa ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1074 € : 2550 mm : 8 mm : 8 mm : 6 mm : 220 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 4900 mm : 1100 mm : 1250 mm : 4600 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111100 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 117800 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 56100 € : 1122 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1425 mm : 1470 mm : 5450 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127000 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 62200 € : 1244 € : 3100 mm : 9 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1425 mm : 1470 mm : 6350 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1600 mm plate thickness: 16,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 0 mm diameter of lower rolls: 0 mm total power requirement: 0 kW weight of the machine ca.: 0 kg. dimensions of the machine ca.: 0 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution ...

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1550 kg range L-W-H: 3220 x 1200 x 900 mm Exhibition machine - unused (!) Special price on request List manufacturer price: 21.400 euros Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds The data for this ad was created with ModulMWS - the software sol ...

- sheet metal cleaning machine for 2-, 3- and 4-edge sheets; smooth and perforated - for baking trays with 58cm width (58x58cm, 58x78cm, 58x98cm) - Dry cleaning with integrated brush lubrication - high output with up to 750 sheets per hour -Operator panel with status displays in national language -Daily and total piece counter, maintenance interval display -easy operation, care and maintenance -movable on castors with locks

sheet width: 1290 mm plate thickness: 6 mm pre-bending: ja roll diameter: 140 mm roll speed: 1 - 6 m/min total power requirement: 2,2 kW weight of the machine ca.: 1120 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Duplo DSF 5000 digital sheet feeder Year of construction: 2009 Very good condition! At call!

It is a used, reconditioned Seewer Rondo Kombi sheeter SKO 67 for sale. The machine is fully functional, new belts are assembled before delivery. The combined dough sheeter is suitable for all types of dough, turing and rolling out for long-working bread of all types of bread dough, rye, wheat and mixed bread doughs with a straight end, for long-rolling plait, pretzel sticks as well as knitting Parisian bread and caviar sticks. Ribs can also be made. Sandwich dough pieces are rolled out and hammered in. Specifications: - with pull-out tape - has manual, infinitely variable roller adjustment - Synchronous gear prevents jamming, shrinking or tearing of the dough sheet - Length for rolling out (working position) 2500mm - Connection: 400V, 16A-CEE plug Price on request.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 60500 € : 2050 mm : 16 mm : 16 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1460 mm : 1550 mm : 6000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59000 € : 2550 mm : 10 mm : 10 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1425 mm : 1470 mm : 5700 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created ...

Sheet centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 Flange diameter: Ø 56 / 72 mm sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m connection cable New ! Dimensions: 210 x 80 x 90 mm

Sheet metal gripper, curve clamping gripper DE-STA-CO 84A32-20100 Max 8 bar New ! Dimensions: 180 x 75 x 65 mm

Sheet metal centering pull-down unit GENUSTECH PM4I2V395067T45C-052 Flange diameter: Ø 56 / 64 mm sensor unit: SENSTRONIC A1202R6K250111C 10 - 55 V DC approx. 0.2 m connection cable New ! Dimensions: 210 x 80 x 90 mm

Sheet metal gripper, curve clamping gripper DE-STA-CO 84A32-20300 Max 8 bar New ! Dimensions: 180 x 75 x 75 mm