sheet used for sale

: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...

working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...

diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit  ...

material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used dough sheeter Fritsch 600 with digital control and automatic reel from 2008 for sale and immediately available in our warehouse in Bielefeld. -Stainless steel dough sheeter Fritsch Rollfix -with reel -with touch display -60 or 65cm belt width -Year of construction : 2009

Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines

x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: CAT-50 ISO spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h ...

Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...

work piece width: max 145 x 150 mm band speed: 1.0 - 8.0 m/min workpiece height: max. 100 mm total power requirement: ca. 5.5 kW weight of the machine ca.: 900 kg. dimensions of the machine ca.: 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDG ...

Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1398.6 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable  ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 € : 2895.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...

Height=1.75 m, Overall length= 1.55 m, Overall width= 1.45 m, Working width: 650 mm Power supply: 3 × 400 V / N + PE Frequency: 50 Hz Total power: 1.8 kW Total current: 11 A Machine number: 02016-29122 condition: refurbished In store Made in Germany Description Refurbished Fritsch Rollfix 70/650 E NU programmable dough sheeter suitable for bakeries and pastry production The machine is equipped with an electronic control panel with stored production programs a flour duster and conveyor belts on both sides Year of manufacture: 2002 Programmable electronic control Flour duster Stainless-steel construction Refurbished and tested

Key data: 2000 mm, 8 mm, 6 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

4 Color Sheet-Fed Offset Press Ryobi 3304H 4 Farben Offsetdruckmaschine / 4 Color Sheet-Fed Offset Press Ryobi 3304H Baujahr / Year 1999 - Serial-No. 1532 Size max. Size 340 x 460mm Feuchtwerk / Dampening System VARN Compac Bedienpult / Console for ink and register PCS-F Automatische Wascheinrichtung / Automatic washer for roller and blanket Verchromte Cylidner / Chromed cylinders Puderapparatt / Power spray Kompresor / Compressor Guter Zustand / Good condition.

2 Color Printing Press Heidelberg SM52-2+ - Plus Version - in good working condition. 2 Color Offset Press Heidelberg SM52-2+ Baujahr / Year 2005 - Serial-No. 207354 Druckzahl / Impressions 46 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration CP-Tronic Autoplate Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included

2 Color Offset Press Heidelberg SM 52-2P+ Plus version with Perfecting 2 Farben Offsetdruckmaschine - 2 Color Offset Press Heidelberg SM 52-2P+ Baujahr / Year 1997 - Serial-No. 201301 Druckzahl / Impressions 54 Mio. Format / Size min. 105 x 145mm - max. 370 x 520mm  Papierdickenbereich / Paper thickness 0,06 - 0,4mm Feuchtwerk mit Kühlung / Dampening System Alcolor - Baldwin Refrigeration Perfecting 1/1 - 2/0 CP-Tronic, Autoplate, Plus Version Farbwalzenwascheinrichtung / Ink roller wash-up device Gummituchwascheinrichtung / Blanket wash-up device Speed 15.000 Sheet Per Hour Powder Spray Grafix Alphatronic 200 Inklusive Handbücher / Manuals Included 

5 Color Offset Press Ryobi 925 P with PCS-G Control Desk and PDS-E color Control. 5 Color Offset Press Ryobi 925P Year 2011 – Serial-No. 1348 Size min. 410 x290mm – max. 640 x 920mm Impressions 79 Mio. PCS-G Control Desk PDS-E color control Ryobimatic Continuous Dampening System Automatic Ink-roller washing device Automatic Blanket washing device Grafix Powder Sprayer Perfecting 1/4 - 5/0

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

Used dough sheeter FRITSCH, type: Rollfix 600 -In bakery condition- - Reel right - Computer control with touchscreen - USB and Ethernet interface - Automatic strip running - Automatic roller position - Automatic flouring - 100 programs can be stored - 18 degrees of reduction of the rollers - 8 freely programmable special reduction curves - Roller spacing: 0.3 - 45 mm - El. Connection: 3x 400 V, 50 Hz, 3 Ph, 1.4 kW, 3.4 A - Strip width: 650 mm - Rolling speed: on outfeed conveyor 56m/min. - Condition: very good, tested, cleaned, ready for immediate use Viewing and test run are possible by arrangement.

1 Farben Offsetdruckmaschine mit VARN Compac Feuchtwerk / 1 Color Sheet-Fed Offset Press with Dampening System VARN Compac 1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO52+ Year 1986 - Serial-No. 685682 Size max. 320 x 460mm Impressions 70 Mio.  Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version Mit Zubehör und Handbüchern / With accessories and Manuals

Stock No.: 4051 TIN SHISS Manufacturer: DURMA, Type: SB 3006 Serial No.: 6076064556, Year of manufacture: 2006 Specifications: Size scissor length 3100 mm Size sheet thickness 6 mm Total power 15 kW Hydraulic.                          Programmatically controlled backgauge. 800 Dimensions: Length: 3100 mm, Height: 1950 mm, Width: 3850 mm, Weight: 6900 kg

Vertical sheet metal storage, drawer sorting storage for sheet metal, Hegla, 10 compartments for sheet metal 1.50m x 3m, – used - : Price from location: 4.500.-€ (net)! Manufacturer: Hegla Type: SCH-SL-3 Year of construction 03/2010 Maximum adjustment length 3,000 mm Maximum adjustment height 1,500 mm Number of compartments:10 compartments Load capacity 500kg per drawer (10 x 500kg) Max. loading height: 1,500mm Total dimensions LxWxH: 3,250mm x 1,590mm x 1,950 mm Condition: good Available: immediately Location: 87719 Mindelheim

GASPARINI electronic folding machine mod. PSG-250/5000 FP FEATURES Axes: R – X – Y1 – Y2 , Z1 , Z2 Folding length: 5,100 mm Pitch between uprights: 4,555 mm Strength: 250 tons. Gooseneck: 465 mm Slide travel: 250 mm Distance between table-slide: 450 mm Control unit: delem Weight: 25,500 kg. Overall dimensions: 6500 x 2300 x 3200 mm Year of manufacture: 2004 Year rebuilt: 2021 CE compliant. PROMECAN pneumatic tie-down. Self-centered lower table with pneumatic tie-down. 1,000 mm motorized backgauge ("X" axle) Height adjustment "R" axis 250 mm. CNC DELEM DA 66W. 4 adjustable motorized turrets Z1, Z2. Folded penetration (axis "Y1, Y2") Low voltage electric pedal operation. Emergency stoppages. Hydrodynamic anti-bending table by hydraulic pumping. Side protections. Level IV safety laser.

Two printing decks Mailander 162. Max sheet format: 1145x960 Feeder, TGX, Dampening system + ink control desk

Feeder Mailandet 466 coater LTG oven Incenerator Double stacker Full electric upgrade in 2024 Max sheet format: 1145x960 Up to 5,500 sheets per hour

1 Color Sheet-Fed Offset Press with VARN Compac Dampening System 1 Farben Offsetdruckmaschine / 1 Color Sheet-Fed Offset Press Heidelberg GTO46+ N+P Year 1978 - Serial-No. 664275 Size max. 320 x 460mm Impressions 70 Mio.  Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version Mit Zubehör und Handbüchern / With accessories and manuals

Key data: 120 mm, 1 mm

- Max. belt width – 120 mm - Sheet thickness - 0.1 – 1.0 mm (40 kp/mm2) - Speed 6 - 36 m / min - ( 10 cm - 60 cm/ s ) - Guideline Cross section – 100 mm2 - Conveyor inlet – left - Control – Start-Stop - Roller mill adjustment – motorized - Mobile version - Drive 0.55/0.75 kW - 750 / 1400 rot/ min - Original documents Btto – 400 kg

Complete coating line including: Feeder Mailander 460 coater, year 1981 GAS oven 30m, year 2000 Double stacker Bundle turner Max sheet format 1145x980 Upgraded with pneumatic system for feeding

Lamina SA 1620 – Sheet laminating machine Year: 2023 Max. format: 1,600 × 2,000 mm Manual feeding of offset-printed top sheets. Reference: PP-58717 Further information on request.

working width: 630 mm workpiece width - max.: 1,0 - 100 mm sandingbelt width: 650 mm sandingbelt length: 1900 mm dimensions: 1320 x 2250 x 2200 mm weight of the machine ca.: 2500 kg Description: - Universal, compact entry-level machine for machining steel, stainless steel, and aluminum - The continuously adjustable sanding belt speed allows you to reliably remove cutting burrs and achieve a smooth surface finish - With our flap-disc unit, you can achieve uniform edge rounding on all sides and a non-directional finish - The speed-controlled rounding unit enables different rounding depths and optimal processing for every application - 150 mm wide magnetic track The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CAVALLERI CT14 (the video was taken before and during reconditioning), Min/Max cutting length 250/1.500 mm. Max web width 1.250 mm. Max unwinder diameter 1.030 mm. n.2 unwinders available max reel weight per shaft 1.020 kg., pneumatic brakes on reel holders will be added before shipping, if requested by client., nominal max thickness 220-250 gr/sqm antistatic bar, photocell, sheet counter, all parameters are controlled by electronic control panel total dimensions LxW 2,2 x 4,8 mt. kg. 4.200, constructed in cast iron sound level under 85 Db encoder w/servo motor - power 18 kw, Construction year 2000 machine offered in good working conditions, check on [this video](youtu.be/867xqXH-bb0), availability: STOCK, conditions: reconditioned, type: CT 14, TEST POSSIBLE: YES

Consisting of 2 parts: 1400mm wide and 1650mm wide; Various types and sizes of sheet material. Auction-ID: A1-50476-122

BULLE pistol-type pneumatic sheet metal shear (air shear). Air consumption 160 l/min at 6 bar operating pressure, 1/4\" air inlet connection. Cutting capacity 1.4 mm, 2200 r.p.m., total tool length 210 mm, weight 2.2 kg. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-40

Dough sheeter FRITSCH, type: Rollfix 700 -overhauled- - Computer control with large touchscreen screen - Reel right - Automatic roller position - Automatic flouring - 100 programs can be stored - Several degrees of reduction of the rollers - Freely programmable special reduction curves - Condition: Very good, ready to use Viewing and test run are possible by arrangement.

Sheet metal warehouse, Stopa, 491 storage locations for sheet metal 1.30 x 2.50m and 1.50m x 3m, – used - : Price ex site: 65.000.-€ (net), plus dismantling etc. Manufacturer: Stopa Type: SLBS 3000 UL (Fab.Nr.93449) Year of manufacture: 1993 / Conversions in 2013 (retrofit) and 2019 Bearing height: 6,400mm Beam (without extensions): GF: 5.26, SF: 5.17m Length: approx. 60m Sheet size SF: 1,300 x 2,500mm Sheet format: GF 1,500 x 3,000mm Load capacity per pallet: 3,000kg Locations SF: 359 Storage locations: GF: 132 Without existing cassettes: still needs to be clarified, 35 Towers / Fields Storage capacity: 1,473t Over the years, various punching/laser machines have been connected to this warehouse. i.e. machines with an interface to the warehouse. Manual press brakes and deburring/grinding machines have no interface to the warehouse. The in/out retrieval stat ...

Approximately 825kg, various sizes, 1x plate stainless steel 304 5mm thick Auction-ID: A1-50964-122

Batch of various stainless steel and aluminum plates and tubes Including frame and pallet Total weight: 455kg Auction-ID: A1-50936-173

2mm thick, with steel protection, only affects the top package of plates Auction-ID: A1-50964-8

Approximately 475kg excluding pallets, various sizes, including aluminum plates of various sizes Auction-ID: A1-50964-127

Approximately 1285kg excluding pallets, various sizes, including aluminum sheets of various sizes Auction-ID: A1-50964-126

Working width 1050 mm Max plate thickness 4mm Cage detachable With electronic foot control Forklift at your disposal Auction-ID: A3-46142-15020