sheet metal punching used for sale

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 560 x 220 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working height from to: 600 - 1150 mm : 1200 kg weight: 495 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma#39;s Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Lu ...

Very few working hours: approx. 200 h Technical and visual condition: very good+ Pictures attached Price: 16.000 EUR net ExW Heavy welded steel construction Horizontal and vertical work possibility All three rollers driven by hydraulic motor and planetary gear Hardened rolls Hydraulic delivery via two lower rollers Lateral mechanical straightening rollers, infinitely adjustable Separate control panel with foot control and 2 digital displays Bending performances profile type optional Explanations for bending performance, profile type optional The performance data apply to material with a max. Yield strength of 24kg / mm². Bending power at VA: factor 0.7 Bending performances profile type standard Square material dimensions [1] 45 mm Square material min. bending Ø [1] 500 mm Square material dimensions [2] 15 mm Square material min. bending Ø [2] 380 mm Flat material l ...

saw blade diameter: 355 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: square: 125 x 125 mm capacity 90 degrees: flat: 170 x 110 mm turning speeds: 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees: - 45 / + 0 total power requirement: 3.5 kW weight of the machine ca.: 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts ...

A tray sealer MetalTech is available. Materials: plastic trays/aluminium trays, max. tray dimensions X/Y: 325mm/265mm. An on-site inspection is possible.

Technical data of the pallet rack crossbar: Shelving System: Metal Sistem Type: Unipal The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 140 x 45 mm Clear width: 1,800 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Band Saw Machine Metallkraft BMBS 300x 320 CNC BJ 2022

Manufacturer: COMUNA-Metall Model: 2726-02 Type of Machine : CHP Plant Nominal Heat Load: 156 kW Thermal Output: 92 kW Electrical Output: 50 kW Operating Voltage: 230/400 V, 3-phase, 50 Hz Fuse Rating: NH00, 100A Connection Pressure: 20–80 mbar Max Operating Pressure: 6 bar Operating Temperature: 100/70 °C Protection Class: IP54 Certification: DIN DVGW Find more here - / Contact us at -

width of the strips: 75 mm band length: 2000 mm band speed: 36 m/min total power requirement: 4 kW weight of the machine ca.: 82 kg dimensions of the machine ca.: 1000 x 500 x 1150 mm Belt sander Metallkraft MBSM 75-240-1, article no.: 3923272 For sanding surfaces, edges and rounding off Description: - Powerful motors and vibration-free operation for the best sanding results - Quick sanding belt change in seconds thanks to quick-release system - Large surface sanding area thanks to fold-away upper sanding belt cover - Continuous sanding surface after removal of attachments enables sanding of long workpieces too - Can be used with and without extraction - One extraction nozzle on the spark box and one on the rear belt roller - Simple adjustment of the belt run via adjusting screw - Automatic retensioning of the sanding belt thanks to spring-loaded belt tensioning system - Infinitely tilta ...

tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

An automatic meat tenderizer roller tenderizer Metalquimia is available. Design: needle-/roller, theoretical throughput capacity: approx. 8500kg/h, machine dimensions X/Y/Z: approx. 2000mm/1300mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible.

This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information.

Mesutronic Metal detector with sorter, type: FC 01 BA 3.1.1, serial number: 1013 FC, year of manufacture: 2013, 230 V, 50 Hz, plastic belt, belt width: 80 mm, pass-through: 130 mm x 205 mm, overall dimensions: 2050 mm x 990 mm x 1500 mm., Safeline Metal detector with exchanger, passage: 200 mm x 350 mm, plastic belt, belt width: 120 mm, overall dimensions: 1600 mm x 900 mm x 1650 mm., Metal detector by Thermo Electron Corporation, Serial number: 06132547, plastic band, band width: 260 mm, passage: 300 mm x 100 mm, overall dimensions: 1200 mm x 900 mm x 1500 mm., Metal detector of the Thermo Electron Corporation , Model: SPECGKDSP3NAS, Serial number: 6277, Year of construction: 2005, plastic band, band width: 250 mm, passage: 300 mm x 100 mm, overall dimensions: 1400 mm x 1100 mm x 1500 mm., Goring Kerr Limited mobile pipeline metal detector, Type: D.S.P2, Serial number: 57423, Year of ma ...

This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine.

General SKU418S1034 MakeMVG-Metallbau- und Vetriebs- GmbH Type8000304 Machine number22569/91116 Year of construction1991 Pressure Working pressure1 Bar Vacuum possiblecheck Working pressure jacket3.5 Bar Main Features MaterialStainless steel Volume427 Ltr. Surface2.84 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel trayscheck Heating surface2,84 m² Drying chamber capacity427 Ltr. Drying chamber sizes670x950x670 mm Max. temperature95 °C Number of trays5 Tray sizes600x945x25 mm Distance between the trays95 mm With 1 doorcheck With vacuum pumpcheck Motor2,2 kW 220-380 Volt MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace1x1,5 M Total height1,9 M Weight1450 KgTray dryersMetallbau- und VertriebsDryers > Tray dryersBrand > Metallbau- und Vertriebs What you can expect from Foeth: -- Machine is in working ...

This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine.

This METAL TECHNIKA OWD-1600 was manufactured in 2018. It features a GOT3000 Mitsubishi controller and excels in full optimization of 30 dimensions across two quality grades. It supports various cutting programs and can handle input material widths from 12 to 250 mm and heights up to 120 mm. Central oil lubrication ensures smooth operation. Consider the opportunity to buy this METAL TECHNIKA OWD-1600 Optimizing Cross-Cut Saw. Contact us for more information about this machine.

This Metallkraft HTBS PRO 3113 was manufactured in 2022. Its a hydraulic shearing machine designed for precise cutting of steel and stainless steel plates up to 13 mm thick. Features include a CNC-controlled back gauge, motorized cutting gap and angle adjustment, and built-in LED lighting for enhanced visibility. Ideal for industrial settings requiring high precision. Contact us for more information about this machine.

CNC Plasma Cutting Machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x Plasma torch with power source Kjellberg HiFocus 280i neo Automatic gas console Donaldson DFPRO 6 Cyclopeel filter system Cutting software Omniwin Standard Availability: immediately

sheet width: 2050 mm plate thickness: 3.0 mm distance between columns: 2100 mm back stop - adjustable: 550 mm no. of strokes: 35 Hub/min cutting angle: 2°12 table width: 400 mm table height: 850 mm Control: konv. total power requirement: 3.0 kW weight of the machine ca.: 1280 kg dimensions of the machine ca.: 2400 x 1500 x 1300 mm Current new price approx. 20.000 Euro from a maintenance workshop Equipment: - robust / powerful electro-mechanical guillotine shears - manual material backgauge stepless adjustment range adjustment from behind - by handwheel including mm scale max. adjustment range 550 mm - Manual kerf adjustment, from the front - 1x side stop with mm-scale - 1x support arms - 1x free-moving foot switch - rear sheet metal chute - rear safety device (light barrier) - Operating instructions (machine control) The data for this ad was created with ModulMWS - the software  ...

filling amount: 250 l basket dimensions: 550 x 270 x 75 mm dimensions of the machine ca.: 1,25 x 0,85 x 1,24 m BALTIC METALL - 6957 Dive Wash Unit - Immersion Tank Dimensions: 595 x 395 x 500 mm - Draining Area Dimensions: 470 x 350 mm - 2x Storage Rack Dimensions: 480 x 360 x 230 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Roll bending machine manufactured in 2020. This Metallkraft GBP BASIC 26100 features a pressing force of 100 tons and a maximum bending length of 2600 mm. It is equipped with an 11 kW engine and has an oil tank capacity of 150 liters. If you are looking to get high-quality bending capabilities, consider the Metallkraft GBP BASIC 26100 machine we have for sale. Contact us for further details.

Brush sander WOODLAND MACHINERY with metal brush (new) Type 1000-2S metal Working width 1000 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Metal shaft 7.5KW Grinding motor 2.2KW Feed motor 1.5 kW Lifting motor 0.37KW Total motor power 11.57 kW Transport dimensions 1600x1650x1450mm Weight 750 kg Price 6700 Eur (EXW Jonava, Lithuania)

Holder, reamer, tool holder, machine reamers, reamer, reaming tool, fitting knife cutting set, milling holder, milling tool, boring head, spindle tool, reducing sleeves, holder -Manufacturer: PGH Metall, holder type 50 60 19 with reamer -Hole: Ø 20 mm -Reamer: Ø 35 mm -Dimensions: Ø 50 x 390 mm -Weight: 1.1 kg

Pneumatic diaphragm pump with pressure multiplier. New equipment

Used Filling Monoblock Metalnova for still and sparkling water 12000 bphThe Used Filling Monoblock Metalnova for still and sparkling water 12000 bph, model LG, offers a bottling solution designed to process still and sparkling water in 2-liter containers, with a production capacity of 12,000 bottles per hour. Manufactured in 1997, the machine is currently dismantled and in storage. It operates in a counterclockwise direction and supports both PET and glass containers, thereby ensuring flexibility for mixed-format bottling lines. Moreover, its design allows seamless integration into existing production environments.Monoblock Configuration and Bottle Rinsing ProcessThe monoblock begins with a rinsing unit equipped with 60 grippers, which has been engineered to clean containers thoroughly before filling. Notably, the system performs two treatment phases, which not only remove impurities but ...

A complete double agitator system 2 x 3000l made of high-quality V2A including propeller agitators made of V2A, continuously variable speed-controlled. Inspection by appointment possible.

General SKU026E105 MakeEvans Universal Ltd. Leeds No.2042 Year of construction1999 Mounted on framecheck Specified Features - Drying oven Drying ovenZinc crucible furnace (1x) Number of compartments:1 Internal diameter425mm Internal height450mm, Inlet dia. 300mm Gas heatingBurner make Riello, type 40 GS 5 (120 KW) Information LocationBarneveld With switchgearcheck Floorspace4,2x2,1 M Total height2,3 M Weight2300 KGDrying ovensDiscountEvans LeedsDryers > Drying ovensDiscountBrand > Evans Leeds What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKUR1406 LocationBarneveld CEcheck Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Surface8 m2 Specified Features - Nutsche filter Capacity17035 ltr With jacket(85 ltr), (66 ltr) Max. temperature-30/200 degr. C Without drivecheck MaterialStainless steel 1.4435 (316L) Information MakeSolme, Societa Lavorazione Metalli (It) Mach.No.9384 Year of construction2015 Floorspace4,0x4,0 M Weight8400 KgCatalysts & fillersFeed additivesDetergent & surf.Other pharmaceuticsCosmeticsOrganicsLubricants & oleoAnimal feedOther feedConfectionerySolid pharmaceuticsBiopharmaceuticalAPIMinerals & inorganicAgrochemicalsBiotechnologyNutsche filtersOther chemicalStarchFine chemicalsOintmentsGeneric medicinesPowdered foodsOils & fatSolme, Societa Lavorazione MetalliIndustries > Che ...

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 90 x 90mm -Total dimensions: Ø 157 x 135 mm -Weight: 6.8 kg

Punching tool, punching stamp, sheet metal punch with tension screw, hand punching tool, screw hole punch, sheet metal punch square -Manufacturer: RUS, square hole punch with tension screw -Size: 69 x 69 mm -Total dimensions: Ø 128 x 120 mm -Weight: 4.8 kg

Key data: 1000 mm, 18 kN

TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1300 mm, 22 kN

TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

Key data: 1500 mm, 22 kN

TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service

AMADA Aries 222 – CNC Punching Machine General data: Manufacturer: AMADA Model: Aries 222 Machine type: Punching and perforating machine for sheet metal Weight: approx. 2000 kg Dimensions (L x W x H): approx. 3000 x 1500 x 2000 mm Technical details: Pressing force: 20 tons Maximum sheet size (without repositioning): not specified Control system: CNC Amadan 03P Turret configuration: typically equipped with a 10-station tool turret for fast tool changes Description: CNC punching machine AMADA Aries 222 designed for processing and perforating sheet metal. The machine is equipped with a turret system allowing quick tool changes and efficient production, making it suitable for industrial sheet metal fabrication. Auction-ID: A7-45351-6

Guillotine shear LOTZE type HSS 20 / 7Cutting length 2050 mmCutting thickness 7 mmwith single back gauge; used

Fully automatic sheet dispenser PAL-Cut 800 The Palcut 800 cuts paper quickly and precisely into intermediate sheets of the desired length, directly from the roll. Fully automatic sheeter PAL-Cut 800 sheet dispenser, which cuts intermediate layers quickly and precisely in the desired length. The sheet dispenser is suitable for continuous operation in an automatic palletizing system and for companies with high sheet consumption. The Palcut 800 works with rollers of max. 800 mm width. Type designation: PAL-Cut 800 Length: 1853 mm Width: 1380 Height: 1739 for roll width up to: 800 mm Mounting height: 1,368 mm Working speed: 480 pcs/h Power connection: 220 V, 0.18 kW Operating mode: fully automatic Weight: 370 kg Link PAL-Cut 800 More items - new and used - can be found in our shop! International shipping costs on request!

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/16011 piece Punching bracket, punching unit for press brakeYear of construction approx. 1990Throat: 160 mmPunching capacity: 0.3 to 5 mm Material thicknessHole diameter: 2 to 7 mmInstallation height: 203 mm (only the punching bracket individually with punching tool)Installed is a round hole tool ø 5 mmPunching bracket distance: 195 mm- the tool unit was mounted on a hydraulic press brakeDimensions punching bracket base plate L x W x H: 2500 x 345 x 37.5 mmDimensions of punching bracket printing plate L x W x H: 2500 x 173 x

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 15 BL 245 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered