sheet metal cutting used for sale

- Cutting size: 1350 mm wide x 600 mm high - With motor: 7.5 hp (5.5 kW)

with 5 pairs of splitting knives (manually adjustable), with manual 5 roller straightening mechanism, with motorized guillotine shears for the cross-section, with PLC touch control and foot switch. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Sheet thickness steel: 1.25 mm Working width: 1250 mm Farbe/Colour grün/lichtgrau Total power requirement: 3.1 kW Machine weight: 1500 kg Straightening rollers: 5 pieces Number of blades: 5 pairs Operator side seen from the inlet side on the left Machine Number: 73350-10

sheet width: 1070 mm plate thickness: 4 mm distance between columns: 1100 mm diameter of upper rolls: 110 mm total power requirement: 5,0 KW weight of the machine ca.: 1,2 t dimensions of the machine ca.: 2,0 x 0,9 x 1,1 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 9.0 / 10,0 mm distance between columns: 1070 mm diameter of upper rolls: 190 mm pre-bending capacity: 9,0 mm connected load: 5,3 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 2,7 x 0,92 x 1,2 mm - Electrically adjustable rear roller - Electrically adjustable lower roll (material clamping) - Digital readout for rear roller movement - Digital readout for lower roll movement (material clamping) - Hardened rolls - Conical rolling - Swiveling top roll - Brake motor - Emergency stop - Documentation - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A hydraulic large-format sheet metal shear Schneider is available. Width: 6020mm, bending length: 6000mm, max. sheet thickness at 6000mm: 10mm. With position display. An on-site inspection is possible.

With the Rau sheet metal edging pliers system, standing seams on double-seam roofs can be easily edged up. The standing seam is bent first by 45 degrees and then 90 degrees by 2 bends. By means of an eccentric and large lever transmission, the pliers press the sheet metal together and this force is automatically maintained during bending. To achieve a sharp upstand, press the pliers with your foot or one hand. The BKZ enables energy-saving work. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 500 mm Weight: t 7 kg Colour: blue/yellow Dimensions: 500 x 60 x 620 mm Machine number: 1214

Hand-operated 3-roll sheet metal round bending machine with asymmetrical roller order Specifications: - Working width max. 1020 mm - Material thickness max. 1.5 mm - Roller diameter 64 mm - Upper roller turned into a crown, can be swung forward - Rear shaft with handwheel diagonally adjustable for conical rounding - Lower roller adjustment with control lever and eccentric - Front shaft parallel - Space requirement approx. W 1250 x H 950 x D 750 mm - Weight approx. 200 kg

5 processing stations, Production width: 230 - 1250 mm, Production length: 500 - 2400 mm, Material thickness: 0.63 - 1.0 (1.5)mm, Material type: Steel 1203 bare, Mains voltage: 400 V 50 Hz, Power: 150 kW, hydraulic pressure: max. 150 bar, Air pressure: max. 10 bar. The control system was renewed by SIEMENS.

Key data: 2 mm, 10 mm

Sheet Straightener 2,000 x 10 mm Execution.. 4high Blechdicje . 3-10 mm Straightening rollers.. 13 pcs. Straightening rollers durcm.. 145 mm Support rollers Duchm 290 mm Weight... 32,000 kg Drive mot... 30 KW

Key data: 550 mm, 3 mm

Manufacturer: DATE Type: MN7-550U Year of Make: 2000 Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

This Salvagnini P4-2220 was manufactured in 1998. A robust sheet metal machine, it handles max sheet lengths up to 2490mm, widths up to 1500mm, and bend lengths up to 2250mm. Ideal for precise large-scale metalworking. Contact us for more information.

This FORST RTSA 32x1600x630 was manufactured in 2019. Consider the opportunity to buy this FORST RTSA 32x1600x630 sheet metal machine. Contact us for more information.

This Euromac BX 1000/50 was manufactured in 2007. A robust and reliable choice for sheet metal operations, it ensures consistent performance. Consider the opportunity to buy this Euromac BX 1000/50 sheet metal machine. Contact us for more information.

This SMT UV 3/-3 was manufactured in 2023. It features a UV lamp unit with a throughput height of 70 mm, both top and bottom, and a working width ranging from 60 to 450 mm. The machine includes an industrial PC, network connectivity via Ethernet, and supports multiple software languages. If you are looking to get high-quality UV processing capabilities consider the SMT UV 3/-3 machine we have for sale. Contact us for more information about this machine.

00905 Designation of the scissors system Manufacturer: Finnpower Model SG6 12.13 Year of construction 2008 Operating hours: (as of Feb 2026) 42,340 h Power on time 6462131min Running time 2540410min Alarm time 2187771min Control Finnpower ICP1 Machine weight 28,000 kg Punching force 300 kN Cutting force 250 kN Max. operating pressure 300 bar Note: Tapping unit without function The SG6 turbine is currently connected to an LP6 Finnpower plant. The SG6 is converted into a stand-alone machine. So that the SG6 can also work independently on its own. The SG6 scissors are also currently connected to a Night Train storage system together with the LP6. (the LP6 layout and Night Train storage system will be dismantled on March 30, 2026) SG6 12 13 3 x 400 V 50 Hz 3 x 80 A Lcu 25 kA Condition Good condition Dismantling March 30, 2026

This AMADA CTS-900 sheet metal machine was manufactured in 1997. It features a control system by AMADA and a power capacity of 1.2KVA. Weighing 1100kg, it has been operated for 428283 hours. Maintenance records are available. If you are looking to get high quality sheet metal capabilities consider the AMADA CTS-900 machine we have for sale. Contact us for more information.

This 3-axis Salvagnini P4-2512 was manufactured in 2000, featuring a max bending length of 2500mm and handling sheet thicknesses up to 3.00mm. It includes quick-clamping segments for enhanced flexibility and precision in sheet metal operations. If you are looking to get high-quality bending capabilities, consider the Salvagnini P4-2512 machine we have for sale. Contact us for more information about this machine.

Sheet metal lockers BURG each 3 pcs. w. hood connected total 2x3 = 6 pcs.

Sack truck sheet metal red handles

Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...

Tin shelf approx. 120x160x40 cm, 3 pairs of boots, glasses

sheet width: 2050 mm plate thickness: 4,5 mm pre-bending: 4,0 mm min. dia.: 210 mm roll diameter: 140 mm weight of the machine ca.: 1530 kg dimensions of the machine ca.: 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9729 : prompt, Zwischenverkauf v : Türkei : 28450 € : 488.96 € : 1 : 25600 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of ...

older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop

This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine.

sheet width: 3355 mm plate thickness: 63,5 mm roll diameter: 686 mm voltage: 400 V total power requirement: 150 HP weight of the machine ca.: 95 t dimensions of the machine ca.: 62 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9722 : prompt, Zwischenverkauf v : Türkei : 16600 € : 318.72 € : 1 : 2050 mm : 3 mm : 130 mm : 3,5 m/min : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS: (time of delivery with options approx. 8 weeks) Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine.

Pipe Production Line manufactured in 2021. This Bazhou Wanxin machine features a dual-station decoiler, hydraulic shear and butt-welding machine, and a cold saw for precise cutting of pipes. It accommodates round pipes with diameters from Ø16-63.5 mm and offers a feeding speed of up to 120 m/min. Consider the opportunity to buy this Bazhou Wanxin Pipe Production Line. Contact us for further details.

sheet width: 1000 mm plate thickness: 3,0 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,47 t dimensions of the machine ca.: 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Sheet metal cleaning machine KD-Putz Tubur Premium Sheet metal cleaning machine for baking trays / perforated trays with lubrication, sheet metal car Connection 400V, 16A-CEE plug Used machine from the bakery

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

KD Putz Sheet Metal Cleaning Machine 58cmProduct descriptionManufacturer: KD PutzCondition: used, functional, bakery conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobilefor 58cm wide 2-edge trays on the short sideThe KD Putz Sheet Metal Cleaning Machine is a special machine used in bakeries and kitchens to clean baking trays. This machine facilitates the removal of dough and baking residues from the trays to ensure a hygienic and clean working environment. The sheet metal cleaning machine from KD Putz can handle various

KD Putz Sheet Metal Cleaning Machine Bakery / GastronomyProduct descriptionManufacturer: KD PutzCondition: used, functional, bakery conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobilefor 60 x 40 cm trays, 2-edge on the short sideBack outputOuter dimensions: width 91.5 cm, depth approx. 74 cm, height 84 cmDetails see pictures.

KD Putz Sheet Metal Cleaning Machine Avidi 800 Product description Manufacturer: KD Putz Type: Avidi 800 Condition: used, functional, bakery condition Material: Stainless steel Cladding with emergency stop switch on castors, mobile For 58 x 78 cm trays, 2-edge on the short side Back output Power connection: 230/400 Volt / 4 A / 1.1 kW Exterior Dimensions: width 112 cm, depth approx. 92 cm, height 84 cm For details, see pictures.

Sheet metal cleaning machine KD Putz for 78 cm traysProduct descriptionManufacturer: KD PutzCondition: used, functional, baker's conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobileFor 58 x 78 cm trays, 2-edge on the short sideBack outputExterior dimensions: width 115 cm, depth approx. 88 cm, height 104 cmDetails see pictures.

Sheet metal cleaning machine Reini 60 â Product description âœ" Manufacturer: Metall- und Apparatebau GmbH âœ" Type: Reini 60 âœ" Year of construction: 1990 âœ" Condition: used, tested, Baker's condition âœ" Material: stainless steel âœ" Cleans with rotatable brushes âœ" suitable for 3 edge sheet metal sizes  60 x 80 cm âœ" With 2 parking brakes âœ" Outside dimensions W.: 79 cm, D.: 55 cm, H.: approx. 135 cm (height with attachment) Details see pictures

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : II A.M.K 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edged baking and perforated baking sheets. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : AVIDI 800 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edge baking and perforated trays. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Sheet Metal Cleaning Basin Fresh Manufacturer : Fresh Type : Spritzmatic Exterior Dimensions : W: 122cm D: 33cm H: 86cm Interior Dimensions : W: 102cm D: 29cm H: 70cm Cleaning for 60x40cm and 60x80cm wide trays on casters Details see picture   

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12900 € : 247.68 € : 1550 mm : 3 mm : 110 mm : 3 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Finn-Power C5-25 - Sheet metal processing center / nibbler Siemens Sinumerik 840 D CNC control Extensive accessory package with approx. 400 tools Various spare parts included in the scope of delivery incl. enclosure of the system the machine is still in operation approx. 12000 operating hours Year of manufacture 2005 Technical data Capacity: - Max. sheet size (X x Y): 2530 x 1270 mm - Min. sheet size (X x Y): 300 x 100 mm - Max. sheet thickness: 8 mm - Max. sheet weight: 200 kg - X-axis length: 2584 mm (X-42... X2542) - Max. travel speed X-axis: 90 m/min - Y-axis length: 1317 mm (Y-25... Y1292) - Max. travel speed Y-axis: 60 m/min Lifting speeds: - High Light: 3000 rpm - Max. stroke rate (1 mm inseam length): 1100 rpm - Hole to hole (25 mm inseam length): 420 rpm - Distance (250 mm stride length): 150 rpm Punching: - Punching force: 300 kN - Punching stroke ...

Sheet metal cabinet without contents ,manufacturer - Please note this lot is also listed as part of lot 1 and is subject to seller conformation by Panasonic, total price for lots 25 to 41 must be greater that the price for lot 1. Auction-ID: A1-45187-30

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, sheet metal gripper lifting clamp IPHTONZ -Clamping range: 0 - 30 mm -Load capacity: 0.375 t -Dimensions: 115/80 / H170 mm -Weight: 2 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: Evers, lifting clamp IPHGZ -Clamping range: 0 - 25 mm -Load capacity: 1.5 t -Dimensions: 200/110 / H300 mm -Weight: 8 kg