sheet metal cutting used for sale

Producent: LOMA Type: IQ 3 Metal detector LOMA type IQ 3 with Intralox conveyor belt Multi-Frequency Metal Detector with Conveyor Belt With TOUCH screen operator terminal Product Feedthrough: 550 x 150 (100) mm (W/H) Fully automatic metal detection system with evaluation electronics Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 abc.inter-wiba.com.pl infointer-wiba.com.pl

7 pallets, Overall dimensions: 1.30 x 0.40 m, Cover dimensions: 1.25 x 0.36 m, including ridge caps and edge strips, and ridge vent caps, galvanized sheet metal, palettes from left to right, - Palette: approx. 268 pieces powder-coated, - Palette: approx. 258 pieces powder-coated, - Palette: approx. 335 pieces of galvanized sheet metal with anthracite powder-coated finish (smooth), - Palette: approx. 304 pieces powder-coated + 4 ridge caps, - Palette: approx. 262 pieces powder-coated, 11 pieces red powder-coated, 18 pieces edge cover, 5 pieces ridge vent caps, - Palette: approx. 111 pieces powder-coated, 30 pieces edge cover, 20 pieces ridge caps, - Palette: approx. 225 pieces powder-coated

1 LOCK INSPECTION SYSTEMS tunnel metal detector type Garmentcheck MET 30+, year 2000

Product Features: The KaFe manual Penal Bender(Bending center) is a next-generation, fully automatic multilateral bending center, offering high precision and efficiency. It represents a benchmark for automated production in the sheet metal manufacturing industry. It significantly reduces labor costs and boasts a bending speed three times that of CNC press brakes, reaching 0.5 seconds per turn. Full servo control ensures product accuracy within 3 seconds. Product Function: The kaFe Manual Penal Bender (Bending center) can bend sheet metal into various complex shapes without the need for molds. Equipped with a pure electric servo system, it replaces hydraulic drive and offers environmentally friendly, high-speed, high-precision, and maintenance-free features. This high-tech product was developed and manufactured to improve production efficiency, reduce labor intensity, and enhance cor ...

2 metal doors in mint condition, complete with frame 60 cm wide, 2 m high, had not yet been installed

Offered is an SLM280 2.0 Single 700W year 2022, approx. 5350h, SLM MCS control. Accessories: Cooling package HRS050 L/W, sieving station PSM100 V3, handling device BPH280, bottle lift, material change kit. SLM280 2.0 complete incl. PSM100, powder container, substrate plates (1.2709 & AlSi10Mg), additional filter housings, filter elements. Fully serviced annually by SLM Solutions (service reports available). Availability from 01.12.2025, inspection possible by arrangement.

However, equipping the PNC 90-3A with three additional PNC/CNC-controlled auxiliary axes now enables a working area of approx. 900x1,100mm and thus an extremely economical production of large printed parts. - Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) - Processing unit KA (in front of the machine) - 4-fold tool changer Specifications: Blank diameter (max.): 900 mm Tip width : 1,100 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 45 kN Axis force (longitudinal) (max.): 45 kN Stroke (transverse): 305 mm Stroke (longitudinal): 650 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 300 mm Tailstock stroke: 450 mm Speeds (infinitely variable): 100-2,300 min-1 Main drive: 28 kW Hydraulic drive: 15 kW Operating voltage: 400 V Frequ ...

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) - Double reel seat Specifications: Blank diameter (max.): 700 mm Tip width : 800 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Cross speed: (max.) 7.0 m/min Longitudinal speed: (max.) 7.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-3,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 7,000 kg

- Hydraulic roundabout centering device - Blank counter holder - Machining unit BAE 1 (on the spindle box) optional 2. - Processing unit KA (in front of the machine) Specifications: Blank diameter (max.): 700 mm Tip width : 825 mm Tool holder DIN 55027: Gr. 6 Axis force (transverse) (max.): 22 kN Axis force (longitudinal) (max.): 20 kN Stroke (transverse): 250 mm Stroke (longitudinal): 400 mm Transverse speed: (max.) 6.0 m/min Longitudinal speed: (max.) 6.0 m/min Stroke ejector: 200 mm Tailstock stroke: 400 mm Speeds (infinitely variable): 100-2,800 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 3,500 kg

- Gearbox with oil circulation lubrication - Blank counter holder (optional) - Processing unit KA - behind the machine (optional) - Specifications: Blank diameter (max.): 1,200 mm Tip width : 900 mm Tool holder DIN 55027: Gr. 11 Axis force (transverse) (max.): 20 kN Axis force (longitudinal) (max.): 30 kN Stroke (transverse): 360 mm Stroke (longitudinal): 750 mm Cross speed: (max.) 3.0 m/min Longitudinal speed: (max.) 2.0 m/min Stroke ejector: 400 mm Tailstock stroke: 750 mm Speeds (9 levels): 42-660 rpm Main drive: 11 kW Hydraulic drive: 7.5 kW Operating voltage: 400 V Frequency: 50 Hz Connected load: approx. 20 kVA Weight: approx. 6,000 kg

- Two-roller technology - 180° arrangement of wheels - Closed work area with coolant and lubricant equipment - Hydraulic roundabout centering device - Gearbox with oil circulation lubrication -Temperature Specifications: Workpiece diameter (max.): 360 mm Blank diameter (max.): 380 mm Workpiece length (max.): 600 mm Center width (max.): 1,340 mm Tip width (min.): 200 mm Tool holder DIN 55026: Gr. 11 Force per axis (transverse) (max.): 117 kN Axle force (longitudinal)/feed axle (max.): 140 kN Stroke (transverse): 190 mm Stroke (longitudinal): 690 mm Feed axis speed: (max.) 1.8 m/min Rapid traverse (longitudinal): 7.0 m/min Adjustment roller (axial): 0-20 mm Stroke ejector: 380 mm Ejector force: 26 kN Tailstock stroke: 800 mm Tailstock force: 5-19 kN Speeds (infinitely adjustable): 6-231-387 min-1 25-850-1,550 min-1 Main drive (DC motor): 33  ...

GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model No.: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical.   POWER SUPPLY: Control / Main Units Power supply:  3Φ, 60 Hz, AC 380 V Rated power consumption (cabinet 1):  290 kVA Rated power consumption (cabinet 2):  160 kVA   VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model:  ULVAC PBL-20 Power:  18 kW Fluid charge: 90 L Voltage:  380 V Water cooling requirement:  25 L/min (

Loma IQ3+ Metal detector Stainless, belt dimensions 1100mm x 300mm, aperture 500mm x 90mm,

SEGATRICE AUTOMATICA a Doppia Colonna SHARK 350 NC HS 5.0 + Evacuatore Motorizzato a Paletta Segatrice a nastro automatica, a doppio montante, per eseguire tagli a 0° su acciai da costruzione, inox e legati, pieni e profilati, con dimensioni comprese in 350x350 mm. Di serie completa di: Evacuatore di trucioli motorizzato dragante, applicabile a destra o a sinistra della macchina. Regolazione della pressione delle morse. Alimentatore con rulli verticali per il contenimento delle barre. Macchina a controllo numerico CNC MEP 50-Windows CE” Based, progettato da MEP per l’automazione delle macchine di propria produzione. Ciclo di taglio taglio pulito” - L’alimentatore arretra la barra per evitare delle rigature sulla superficie tagliata quando il nastro torna in alto. Sistema di controllo a bus di campo con doppio microprocessore con collegamento seriale. Interfaccia uten ...

Offer 25326 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90° around 130 mm - Square 120 m - Rectangle 300 x 40 - or 240 x 80 mm - at 45° about 130 m - Square 110 mm - Rectangle 245 x 40 mm - Mitre adjustable Li + Re each 0 - 90 ° - 2 Cutting speeds - Drive 400 V / 1.26 / 2.5 kW - Feed speed of the saw blade hydr. Infinitely variable - Coolant device - Space requirement approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Feed + discharge roller conveyor with dimension stop 6000 mm

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

This is a LOMA Systems IQ-series industrial metal detector, commonly used in food and dairy processing lines. Here’s a clear, practical breakdown of what it is and what it does., Its job is foreign body detection — specifically metal contamination — to protect:, - Product safety, - Equipment (pumps, fillers, valves), - Brand and compliance (HACCP, BRC, IFS, etc.), You’ll typically find these on:, - Dairy products (cheese, butter, powders), - Ready meals, - Meat & poultry, - Bakery, - Packaged foods on conveyors, What metals it detects, The IQ range detects all three common metal types:, - Ferrous (iron, steel), - Non-ferrous (brass, aluminium), - Stainless steel (the hardest to detect in food environments), Sensitivity depends on:, - Aperture size, - Product type (wet/dry, salt content), - Conveyor speed, - Calibration, The LOMA IQ control system, The LOMA IQ® controller you sho ...

Metal band saw vertical Manufacturer: Bauer Type: VG 450 L Year of Make: 2010 Cutting range: 90° round = 450 mm 90° flat = 450 x 620 mm 45° left = 450 x 420 mm 45° right = 450 x 390 mm 30° right = 450 x 250 mm Material infeed height: 930 mm Saw blade roller Ø: 450 mm Saw blade dimensions: 4,450 x 34 x 1.5 mm Cutting speed: 35, 70 m/min. Special accessories infinitely variable Saw blade guide: deflection rollers + carbide jaws Material clamping manually via handwheel + trapezoidal spindle Saw frame feed: hydraulic cutting pressure control Material feed: manual Spraying device Mains-air: min. 2 bar designed for mitre cuts Saw motor: 2.2 kW Coolant pump: 0.1 kW Hydraulic pump: 0.37 kW Space requirement L/W/H: 2,150 x 1,400 x 2,250 mm Weight approx. 900 kg Operating instructions

A Pulsotronic metal detector for liquid and pasty products in pipeline systems is available. Pipe diameter: 100mm, max. operating pressure: 10bar, max. operating temperature: 80°C, version: EX. Machine dimensions X/Y/Z: 1250mm/550mm/700mm, weight: approx. 50kg. On site inspection is possible.

Type: IQ³+ST Serial number: QPB90-15-24908D Year of construction: 2014 Belt width: 860 mm Passage: 860 x 110 mm Compressed air: 6 - 8 Bar Power: 3 x 415V, 50Hz, 0.5kW Dimensions: 2350 x 1450 x 1650 mm With pneumatic reject

This sawing machine was manufactured in 2000 by KALTENBACH. The KBS 851 DGNC features a miter tilting capability of -60° left and -50° right, accommodating material dimensions at 90° up to 850 x 500 mm. It supports various saw blade types including M2, M42, and M51, with a cutting speed range of 20-120 m/min. Includes an integrated chip tray and Proficut control software. Ideal for steel profile cutting in construction and trade. For more information about this sawing machine, please reach out to us.

This KASTO KASTOflex F Circular Metal Saw was manufactured in 2009. It features a weight of 2700 kg, operates on 400 V, and includes an automatic feed, residue bunker, and coolant device. It supports mitre cuts and has a loading station with a 20-compartment chain magazine. The discharge side boasts a 5 m long apron conveyor with programmable discharge stations. Consider the opportunity to buy this KASTO KASTOflex F Circular Metal Saw. Contact us for more information.

This BERG & SCHMID VKS 370 VA was manufactured in 2019. It features a fully automatic hydropneumatic vertical circular saw with CNC frequency conversion. The machine includes a roller conveyor on the feed side (3m) and discharge side (2m), enhancing material handling. Starter Kit 1 with circular saw blades and coolant concentrate is also included. Consider the opportunity to buy this BERG & SCHMID VKS 370 VA Circular Metal Saw. Contact us for more information.

This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.

This sawing machine was manufactured in 2010. The KASTO Radial M10 can handle a variety of materials with cutting capacities up to 100 mm for round solid materials and tubes, and 170 x 90 mm for flat materials. It operates on a 400 V 50 Hz 3-phase connection and measures 600 x 800 x 1700 mm, weighing 452 kg. For more information about this sawing machine, please reach out to us.

This KALTENBACH SKL 450 NA Circular Metal Saw was manufactured in 2007. It features a vertical saw principle with a rotating table for mitre and longitudinal cuts up to 180 degrees. The saw unit is mounted beneath the table, ensuring optimal cutting range utilization. It includes a hydro-pneumatic saw blade feed and a large viewing window for enhanced work area visibility. Ideal for sawing aluminum and non-ferrous metals. Contact us for more information about this machine.

This Behringer HBE 511 A was manufactured in 2018. Ideal for precision metal cutting, this Metal Band Saw features a robust design and is well-suited for a variety of metalworking applications. Consider the opportunity to buy this Behringer HBE 511 A Metal Band Saw. Contact us for more information.

This Behringer PSU 450H was manufactured in 2019. It features a robust gear and worm gearbox driven by a 3-phase, 4.0/4.8 HP motor, ensuring durability and efficient operation. The user-friendly control panel includes handwheel controls for material stop and clamping pressure. Its hydraulic system is powered by a 2.4 HP motor with a 6.6-gallon pump. Additional features include a coolant system and a weight of 1150 kg. Contact us for more information about this machine.

This 3-axis Friggi VTS 4100 X 1500 X 1200 HS was manufactured in 2007. It features a maximum blade length of 11470 mm and blade dimensions of 41 x 1.3 mm. The band rotation speed ranges from 400 to 2300 m/min, and the blade motor power is 45 KW. If you are looking to get high-quality cutting capabilities, consider the Friggi VTS 4100 X 1500 X 1200 HS machine we have for sale.Contact us for more information.

This 3-axis MOSSNER Rekord SSF 630 Metal Band Saw was manufactured in 2019. It features an 11 kW reinforced motor, dual-speed manual transmission, and a complete roller guide. The saw includes a feed table with 4 T-slots, an emergency stop button, and an LED work light. Its mounted on a steel plate for stability, with spare saw blades included. Consider the opportunity to buy this MOSSNER Rekord SSF 630 Metal Band Saw. Contact us for more information.

This Concept Laser M2 cusing 3D Printer was manufactured in the year 2015.

This JAESPA W 440 HA Metal Band Saw was manufactured in 2015. It features a saw band length of 4,900 mm and operates on 400 V / 25 A. Certified with CE standards, consider the opportunity to buy this JAESPA W 440 HA Metal Band Saw. Contact us for more information.

This KNUTH BO 110 was manufactured in 2013. A robust boring machine, it features a maximum workpiece diameter of 250 mm and a grinding length of up to 500 mm. The grinding wheel operates at 1670 RPM, with a headstock speed variable from 50 to 500 RPM. It supports a table swivel range of ±9° and a table speed up to 4 m/min. Ideal for precision boring, the KNUTH BO 110 machine we have for sale. Contact us for further details.

This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information.

This Hahn+Kolb Flott P40 drilling machine was manufactured in 1980. It features a continuous drilling capacity of 35/40 mm, a tapping capacity up to M30, and a drilling depth of 160 mm. The machine includes a column diameter of 125 mm and a table surface of 590 x 450 mm. Spindle speeds are variable from 100 to 2,000 rpm. Consider the opportunity to buy this Hahn+Kolb Flott P40 drilling machine. Contact us for more information.

This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information.

This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information.

This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine.

This 4-axis MONTAVAR HBG 105 CNC was manufactured in 2009. It features X-axis travel of 2000 mm, Y-axis travel of 1250 mm, Z-axis travel of 1000 mm, W-axis stroke of 600 mm, and B-axis rotation of 360 degrees. Equipped with Heidenhain TNC 530 controls and a maximum RPM of 1200. If you are looking to get high-quality milling capabilities consider the MONTAVAR HBG 105 CNC machine we have for sale. Contact us for more information.

This BOMAR Individual 520.360 GANC was manufactured in 2019. It features an automatic operating mode with a mitre cutting range of 0° – 60°. The saw band operates at speeds between 20 – 120 m/min, accommodating a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metal cutting capabilities. Contact us for more information about this machine.

This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information.

Hello, We hereby offer you a walk-through metal detector of the manufacturer CEIA, type SDM 600 PLUS/PZ (stock goods) of the manufacturer CEIA. Manufacturer CEIA GmbH, Wiesbaden, Germany Type SDM 600 PLUS/PZ, with integrated, highly sensitive MI2/MSD sensors in both antennas Year of purchase 2022 Possible areas of application: Security checks at airports, cargo facilities, government and correctional facilities, government, industry and nuclear power plants, major public events, trade fairs, congresses, checkpoints, access controls in high-value areas, etc. Technical data and description: Very high passenger throughput with a speed of up to 15 m/s and a reset rate of 0.2 s. High rate of discrimination against personal items (glasses, belts, keys, watches, coins, etc.) meets the strict standards of airport security checks. Compliant with the NIJ-0601.02 law enforcemen ...

This 4-axis SMCTL PCB110 boring machine was manufactured in 2008. It features a spindle diameter of 110 mm, ISO50 spindle nose, and a spindle speed range of 10 to 2500 RPM. The table dimensions are 1250x1400 mm, supporting up to 5000 kg. It includes a HEIDENHAIN ITNC530 CNC, milling head, and a chip conveyor. Consider the opportunity to buy this SMCTL PCB110 boring machine. Contact us for more information about this machine.

This Emmegi Luna 450 TU/5 Circular Metal Saw was manufactured in 2008. It features a saw blade diameter of 450 mm and a spindle diameter of 32 mm. The saw blade motor operates at 2.2 kW with a speed of 2800 rpm. It supports cutting lengths from 310 mm to 5000 mm and has a weight of 1400 kg. Dimensions are 9400x1400x1838H. Contact us for more information about this machine.

Circular Metal Saw manufactured in 2007. This FomIndustrie Blitz Alva 450/500 ABC features a blade diameter of 450 mm, allowing for precise miter cuts. With a tool speed of 2800 RPM, it is designed for high-speed cutting across various materials. The robust construction ensures stability and longevity, making it ideal for heavy-duty industrial environments. Consider the opportunity to buy this FomIndustrie Blitz Alva 450/500 ABC Circular Metal Saw. Contact us for further details.

This Behringer VAL350NC Circular Metal Saw was manufactured in 2008. It features a cutting capacity for round materials of 115 mm and rectangular materials of 200 × 70 mm. The saw blade diameter is 350 mm, powered by a robust 6.5 / 8.0 kW drive. With a weight of approximately 2.3 tons, this machine is equipped with a BEHRINGER PLC control system and a micro spray lubrication system. Consider the opportunity to buy this Behringer VAL350NC Circular Metal Saw. Contact us for further details.

Circular Metal Saw manufactured in 2004. This KALTENBACH SKL450NA features a saw blade diameter of 450 mm and a cutting capacity of 150 mm for round materials. With a weight of approximately 1.5 tons, it includes a loading magazine for enhanced efficiency. If you are looking to get high-quality cutting capabilities, consider the KALTENBACH SKL450NA machine we have for sale. Contact us for further details.

metal detector spec. for jars, make Loma type IQ4, year 2005/2021, With search head, make LOMA IQ4 (search head - opening: width: 150 mm, height: 250 mm), Search head design: stainless steel housing, protection class IP 69k,, · 3-frequency technology to better adapt to different product effects and package sizes, Conveyor belt year 2005, unused, with Intralox tape, IP 67,, ejection by means of an air nozzle,, Drive with Danfoss frequency converter,, · Output: up to max. approx. 200 packs / min., Tape data:, Protection class: IP 67, · Total length: approx. 2,000 mm,, Useful width of the Intralox belt: 100 mm,, · Lockable box for rejected products, Plastic side guide in the inlet: length: 560 mm, height: 130 mm,, · With transfer rollers in the infeed and outfeed for gentle transfer of the containers.

This 5-axis San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) was manufactured in 2000. It features a horizontal spindle orientation, a table size of 1,300 x 1,100 mm, and a tool magazine with 30 positions. Spindle speeds range from 20 to 3,000 rpm, and it includes a continuous rotary table. Consider the opportunity to buy this San Rocco FMC 110/S-MMZ CNC ECS 4801 (OE) boring machine. Contact us for more information about this machine.

This EMA FN 50/1600 was manufactured in 2000. A robust radial drilling machine with a drilling capacity of Ø 50 mm and an arm reach of 1,600 mm. It features spindle speeds from 38 to 1,500 RPM and a spindle travel of 350 mm. Weighing 3,800 kg, its designed for precision and durability. Consider the opportunity to buy this EMA FN 50/1600 drilling machine. Contact us for more information.