sheet metal cutting used for sale

Dough Sheeter/Cutting Table Combination Year of construction 2014 Semi-automatic Band width: approx. 64cm Band length: approx. 150cm Roll gap 0.3-45mm with cutting roller frame for 2 tools completely stainless steel - Ribbons new - Tested and cleaned

Sheeter Fritsch Rollfix 3/630 for all doughs for rolling out and touring Robust technology only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty

Sheeting machine Seewer Rondo SKO 63 for all doughs for rolling out and touring Extendable table left only DGUV V3 tested by us Connection 400V, 16A-CEE plug Used machine overhauled & SAB tested with warranty

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

Sheeter Fritsch Rollfix 5/630 Comfort for all doughs for rolling out and touring Manual operation Robust technology Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine overhauled

Sheeter Rondo Doge Compas 3000 Rondo Doge Model: SFA 612 Compass Touch computer control for all doughs for rolling out and touring with reel on the right for rolling up Connection 400V, 16A-CEE plug Used machine from the bakery

Sheeter Fritsch Rollfix 6/650 E Computer Control / Program Control for all doughs for rolling out and touring with reel for rolling up Machine mobile Connection 400V, 16A-CEE plug Used machine

Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.

Sheeter Fritsch Rollfix 60/650 E Computer Control / Program Control for all doughs for rolling out and touring with reel for rolling up Electric Flourer Machine mobile with 2 brakes Connection 400V, 16A-CEE plug Used machine

 Aluminium Perforated Sheets 3 Rand NEW(10 pcs) Aluminium Perforated Sheets 3 Rand 600 mm x 400 mmPerforated Sheet 3 Rand  , Edge Height 23 mmRound Perforation 3.0 mmMaterial Thickness 1.5 mmNEWDedetails see picture

ECCENTRIC ROUNDER

Krones Variopac Pro FS 45 Type: Film only Output: 45 cycles/min. Year of Make: 2008

Dough sheeter with simple manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400 V, 16A-CEE plug Used machine & SAB tested Quality from a specialist company! Benefit from over 35 years of experience!

Sheeting machine Seewer Rondo SKO 63 for all doughs for rolling out and touring Extendable table left Dough sheeter mobile Connection 400V, 16A-CEE plug Used machine

Sheeter Sinmag SM 520 F Easy manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400V, 16A-CEE plug Used machine

Sheeter Seewer Rondo SKO 611 for all doughs for rolling out and touring with program control Extendable table left Connection 400V, 16A-CEE plug Used machine

Packing machine Minipack FM-75N Hood shrinking machine Minipack with base Connection 230 V Used machine

Color: Yellow Original packaging Price per unit = 12.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 12.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Checked and cleaned Good working conditions

Unaudited from company closure Auction-ID: A7-45427-53

Sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - El. Connection: 3x 400 V, 230 V, 50 Hz, 3 Ph, 11.0 A, 1.4kW - Strip width: 650 mm - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

Concerns lot Asbestos-free corrugated sheets without drill holes various sizes. approximately: 580m2 Auction-ID: A1-40134-330

Concerns lot Asbestos-free corrugated sheets without drill holes various sizes. approximately: 200m2 Auction-ID: A1-40134-329

Concerns asbestos-free black corrugated sheets without drill holes. approximately 420 m2. Various sizes Auction-ID: A1-40134-325

Concerns lot Asbestos-free corrugated sheets without drill holes various sizes. approximately: 100m2 Auction-ID: A1-40134-328

Concerns lot Asbestos-free corrugated sheets without drill holes various sizes. approx: 438m2 Auction-ID: A1-40134-324

1x Steel sheet cabinet with contents, various filter bags Auction-ID: A1-45187-391

42 pallets of Kronospan HDF CTS Shinousand EN717, 4.00mm x 1280mm x 1270mm. 150 sheets per pallet. Unused. Auction-ID: A1-45187-110

1x Steel sheet cabinet with contents - various micro drills (partially resharpened or like new) Auction-ID: A1-45187-392

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...

Universal cutting machine with circular knife, d 250 mm

Kitchen slicer, crooked, type KSSM-V 1.4 D

Used machine CNC cutter/plotter cutting surface in X and Y: 3,500 x 2,100 mm Multifunctional CAM cutting system in CNC knife technology for the 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunction tool head The machine is sold with a driven round knife and a punching tool. Mu3Vqs • Multifunction tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with grey conveyor table (conveyor) as standard. Green-blue exchange conveyor possible (offers high contrast for dark materials) Other tools can be expanded (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven round blade • UCT universal knife (drawing knife) • KCT Kiss-Cut Tool  ...

used to cut cabbage heads for sauerkraut production,, diameter of the cutting discs: 800 mm,

Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used

Plasma cutting machine CLOOS type CPS 40/80Year of construction 1990Power at 60 % ED 80 Amp.Power at 100 % ED 40 Amp.Adjustment range 40 and 80 Amperes (2 steps)Cutting capacity for steel max. 25 mmHose package length 5.5 metersMains connection 400 Volt with 32 Amp. Plug and hand torch CLOOndimension L x W x H 700 x 600 x 750 mmWeight 160 kgGood condition; used

CNC flame cutting machine BACH type ACW 2500Flame cutting machine with CNC control NBS 400Masch. No. 14 561-06 Year of manufacture 2006Cutting area 2500 x 6500 mmRaceway length 8000 mmTrack width 3345 mmHeight of the raceway 650 mm2x Machine cutting torchwith burning table; used

Plasma Cutting Machine, Plasma Cutting Machine MESSER GRIESSHEIM Type Plasmastar HA 95Fabr. No. 4040 Year of construction 1990Power 95 Amp. - 60% ED 45 Amp. - 70 % EDEsetting range 2 stepsCutting capacity 25 mm (clean cut)Separating cut max. 45 mmHand torch PHC 95/140Power connection 380 volts, 50 Hz, 32 Amp. Plug- Water-cooled- 8 meters hose package length- Operating instructionsSpace required L x W x H 900 x 480 x 850 mmWeight 160 kgvery good condition; used

Thread cutting machine, pipe thread cutter -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Metal detector with search coil EQA 65 x 15, No. 6.30.8941.30. Evaluation electronics EMS 21.1 and search coil display metallic foreign bodies in all non-conductive materials. Search width: 650 mm, pass height: 200 mm. Sensitivity is infinitely adjustable. With evaluation electronics in the control box.

Metal press RMH MB (Mini Baler) This machine is particularly suitable for pressing aluminium, copper, zinc and other metals. The RMH MB Mini Baler is able to crush and then press larger material made of aluminium, copper, zinc and other metals thanks to lateral knives on three sides of the filling box. Technical data: Drive: 7.5 Kw / 400 V Weight: 1.8 T Shear lid pressure: 20 t Ground ram pressure: 40 t Working pressure: 220 BAR Filling box dimensions (L x W x D): 81.5 cm x 35 cm x 51 cm Package dimensions (L x W x material quantity): 35 cm x 20 cm x variable length (material quantity) Pressing cycle: about 1 minute Dimensions (L x W x H): 2.45 meters x 1.20 meters x 1.40 meters CE Norm Metal Baler RMH MB (mini baler) Cutting edges on three sides of the bale box and lid give this machine the ability to handle with oversized materials out of aluminium, copper,  ...

35 cm x 20 cm

Item condition: New. Machine is delivered pre-assembled and tested. Specifications / Technical Data S-720 CNC-Fraesmaschine Engravings of all kinds, even on glass, VHM, carbide and up to 62 RC hard steel ! With the High-Z CNC-Fraes.- and Engraving Machine they acquire an all-round talent. Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All machines are supplied with coloured energy chains on all axes due to improved cable guidance. Furthermore, all machines are pr ...

Recycling plant with all necessary permits for the processing of wood, metal, plastic, compost, etc. is provided the supply of biomass to operate a remote heating system with 2-3 MW of power. There are corresponding contracts with energy buyers. Plot 7200 m2, fixed and is partially built over 2000 m2 Preparation year 2012-more information at Peter Ari Schär of MATEC Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland

The SERVOCUT 302 cutting machine is designed as a wet cutting grinder for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramics or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERVOCUT cutting machine  ...

Max Saegeblattdurchmesser, 315 mms of drilling 32 mms sheet speeds 53-105 revos quick instep vice 180 mms of opening engine power 2.2 kW role edition coolant equipment +-45 ° tiltable weight 220 kg special price: net 1584,-? . options: underframe net 197,-? circular-saw blade

We offer metal trays, which are used as subjects in heavy duty and pallet racks. technical data: Width: 890mm Depth: 1120mm Number of sticks: 3 units Capacity: At box 500kg, when setting up a pallet of 1000 kg Weight: 6, 8kg / PCs. Net price â?¬13.00 per piece Product available now We have also other Rack Accessories, as well as other racks on sale. Do you need something? Like to take contact with us. On request, we can organise transport. After entering the zip code, we will charge you the delivery cost. To the purchase price, transport costs must be considered. Offer is valid until stocks last. Before you click buy, you record please contact with us, to confirm the availability of the product.

Model RMH 50 x 30 - 65 machines dimensions without preloading box / side case box L x B x H / in metres 4.10 x 1.40 x 1.95 loading box dimensions: L x B x T / in cm: 110 x 50 x 54 parcel dimension in cm: 50 x 30 x material amount engine kW / volt: 11 / 400 ///// Optionally with 22 kW / 400 mole lid pressure in T.: 40 mole lid cylinder piston rod diameter: 160 mms ground rams pressure in T 65 Optionally also with 100 or 150 metric tons press force ground ram piston rod diameter: 200 mms working pressure in BAR: 200 Presszyklus/seconds: 60 weight in kg: 4900 control: by hand optionally also with lateral preloading box available

Technical data: engine: 7.5 kW / 400 V weight: 1.8 t mole lid pressure: 20 t ground rams pressure: 40 t working pressure: 220 BARS filling box dimension (L x B x T): 81.5 cm x 35 cm x 51 cm parcel dimension (L x B x material amount): 35 cm x 20 cm x variable length (material amount) Presszyklus: approx. 1 minute dimensions (L x B x H): 2.45 metres x 1.20 metres x 1.40 metres CE norm