sheet metal bending used for sale

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Baking sheet Cleaning maschie sheet metal plastering machine Ullmann -for sheet metal 60x40cm edges on the short side -for sheets 58x78cm edges on the long side -400 volts

Baking sheet plastering machine KD plaster 100 era -suitable for sheets 98cm 2 edge -Baking sheets 58x98cm -with mobile base -with oiling -400 volts

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data:1 notching tool for presses External dimensions: 345 x 345 x 210 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 550, ------------------------------1 notching tool for presses External dimensions: 250 x 350 x 260 mm used, in good condition: EUR 350, -----------------------------1 notching tool for presses External dimensions: 345 x 345 x 220 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 520, ----------------------------1 notching tool for presses External dimensions: 345 x 345 x 325 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 410, -For drawing see documentsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are a ...

Hydraulic notching machine make INDUMASCH type FA 250/6Year of construction 1995Technical specifications:fixed cutting head:90°Blade length: 250mmCutting capacity mild steel: 250 x 250 x 6.0 mmCutting capacity stainless steel: 250 x 250 x 4.0 mmTable dimensions approx.: 1000 x 790 mmMain Voltage: 380V 50HzDrive power: 3.0 kWApprox. weight: 810 kgDimensions approx.: 1000 x 1200 x 1250 mmwith- Electrical stroke adjustment with digital display- Inside stop- foot switch- automatic cutting gap adjustmentused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

Qty. 1 Second-hand aluminium strip production plant Entry Material: Aluminium Scrap – HD666, AA5050, 2.5-3.0% Mg Final product: Aluminium strip (can stock) Width: 220 mm Thickness: 0.15 – 1.0 mm Mfc.: De Winter, Thermcon, Fata Hunter, Fröhling, Nederman, Burghardt & Schmidt, Siemens Built: 1984, 1999, 2000, 2002, 2014, 2015 Scope of supply: Melting Furnace Tilting Casting Furnace Block Caster 5 Stand Hot Rolling Mill 6 Stand Cold Rolling Mill Hot Gas Filter Slitter Welding Machine Treatment Furnace Quenching Unit Shear

Qty. 1 Second-hand strip rolling mill Mfc.: United Engineering Type: 4-Hi Built: Strip Width: 393 mm (15.5”) Thickness Entry: 4 mm (0.16”) Exit: 1.2 mm (0.05”) Mill Speed: 405 m/min. (1330 Fpm) Strip Tension: 2670 kg (5875 Lbs) Coil ID 406 mm (16”) Coil OD 1448 mm (57”) Coil weight: 3180 kg (7000 lbs)

Capacity of 800 – 1000 trays per hour. 3 main brushes for cleaning, made of polyamide. 2 brushes for cleaning of perforated trays. All brushes can be adjusted individually to prolong the lifespan. Quick copuling system for the cleaning brushes. (Un-/mounting without tools). Easy fix-System for main cleaning brushes. The whole machine can be cleaned with water. External oil container with sight glass and circulation pump. Mobil scrapings container.

Forming capacities Steel 2 mm Light metal 2.5 mm Stainless steel 1.5 Extension 340 mm Installation height 192 mm Working stroke 25 mm Working cycles 400 p/min. Tiltable 0 - 15o accessories: - 1 pc. tool Engine power 1.5 kW Country of origin Switzerland Machine Weight 330 kg Dimensions LxWxH 120 x 60 x 170 cm

CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make LOTZE type HZK 25 2500/3Machine -No: 1827 built in 1956Max. Working length: 2540 mmMax. Sheet thickness: 3.0 mmmin. Inner bending radius: 4.0 mmMax. Opening width of the upper beam: 300 mmOpening width of the bending beam: 40 mmWorking height: 800 mmDrive power: 3.5 / 2.2 kWDimensions: 4200 x 1400 x 1600 mmWeight approx: 3.75 tWith- gear lever gearbox for opening and closing,xa0xa0xa0 Bending and returnused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIYear of construction 1985Effective length: 1020 mmMax. Sheet thickness: 3 mmMax. Opening width of the upper beam: 290 mmMax. Adjustment speed of the lower and bending beam: 90 mmMotor power bending beam: 2.2 kWEngine power upper beam: 1.5 hpDimensions L x W x H: 1600 x 700 x 1500 mmWeight approx: 1300 kgWith:- backgauge- Footswitch- separate control panel- one-sided bending cheek driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIMasch. -No: . 45858, year of construction 1985Working length: 2025 mmMax. Sheet thickness: 2.25 mmMmin. Turning width: 5 X sMin. Inner radius: 1.5 - 2 X sAdjustment of the lower and bending cheek: 90 mmfor round bends: 90 mmhighest working position of the upper beam: 190 mmmax. Opening width of the upper beam: 290 mmDrive power: 3.0 / 1.1 kWDuration of a workflow: 7.0 sec.Weight approx: 2450 kgExternal dimensions approx: 3000x1000x1650 mmWith:- Control panel on the right side of the machine- Easy bending angle adjustment on the control panel- optional switching to automatic, semi-automatic or inching mode- Potentiometer for the degree adjustment- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted ...

Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...

Universal motorized folding machine make STÜCKMANN + HILLEN type AWR / M 2000/2Machine -No: M 05769061, year of construction 1976Working width: 2050 mmMax. Sheet thickness: 2.0 mmlargest passage: 3100 mmOpening width of the upper beam: 250 mmOpening width of the lower beam: 105 mmOpening width of the bending beam: 105 mmlargest opening width: 200 mmDrive power: 0.75 / 3.0 kWWeight: 2850 kgExternal dimensions: 3900x1000 x 1700 mmWith- driven upper, lower and bending cheek- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized swivel bending machine make HERA type UM III 2500 x 5 mmMachine -No: 2013Technical specifications:Working width 2500 mmMax. Sheet thickness 3.0 mmSmallest shelf height with the greatest sheet thickness 16 mmsmallest inner bending radius with the greatest sheet thickness 4.5 mmMax. Opening width of the upper beam 350 mmMax. Adjustability of the lower andFolding beam 125 mmlargest diameter when rounding 250 mmWeight approx 3100 kgMotor power 5.5 HPWith- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swivel bending machine make JORNS Norma-Line-125-SH-OP / 2-8Machine -No: 9778-01 built in 1997Technical specifications:Bending length: 8000 mmInsertion depth: 1000 mmmax.sheet thickness steel: 1.25 mmmax.sheet thickness aluminum: 2 mmmax.sheet thickness VA: 0.80 mmmax.operating pressure: 140 barStroke of the upper beam: 200 mmNumber of bending cylinders: 4Drive power: 4.0 kWDimensions: 8500 x 1300 x 1800 mmWeight approx: 4.9 twith- OP 2100 axis control (9 memory locations)- Guide rail with roller shears- 2-pedal foot control- Emergency stop raillittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-fold combined hydr. Sheet metal working machineHydraulic folding machine - press brake - guillotine shearsMake GRIEBEL type SAS 75-30-4 built in 1981Technical specifications:PRESS BRAKE PERFORMANCEWorking pressure: 75 tWorking length: 3050 mmProjection: 120 mmStroke: 270 mmForward speed: 37 mm / sec.Working speed: 0 - 30 mm / sec.Return speed: 45 mm / sec.Number of angle programs: 6PERFORMANCE BENDING MACHINELength: 3050 mmSheet thickness: 3.0 mmProjection: 400 mmStroke of the upper beam: 290 mmForward speed of the upper beam: 37 mm / sec.Return speed of the upper beam: 42 mm / sec.Working speed of the bending beam: 45 ° / sec.Number of bending programs: 6PERFORMANCE TABLE SHEARSCutting length: 3050 mmmax.sheet thickness: 4.0 mmCutting angle: 1 ° 20´Knife strokes: 10 - 15 H / min.Number of hold-down devices: 20Pressure of the hold-down device: 250 kpProjection: 270 mmGENERAL DATA:El ...

Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual bending machine make REINHART München type UBM IIMachine -No: 127Bend length: 500 mmBending capacity at 37 kg strength: 1.0 mmBending capacity at bending length 300 mm: 1.5 mmBending capacity at bending length 200 mm: 2.0 mmOpening width of the upper beam: 20 mmDepth of the back stop: 300 mmOutside dimensions approx: 900 x 600 x 280 mmWeight approx: 150 kgWith- many different additional tools- manual backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swivel bending machine make HERA type U IIIYear of construction 1974Technical specifications:Bending length: 1540 mmgreatest sheet thickness at 40 kg: 4.0 mmSmallest shelf height with the greatest sheet thickness: 20 mmOpening width of the upper beam: 350 mmAdjustability of the lower and bending beam: 125 mmlargest diameter when rounding: 250 mmExternal dimensions approx .: 2500 x 1000 x 2000 mmWeight approx: 1000 kgWith- counterweight- Hand wheel for height adjustment of the upper beamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

Hydr. CNC-Sheet metal Shear make GWF MENGELE type S 8 - 1500Machine -No: S2544, built in 1989Max. Cutting length: 1550 mmMax. Sheet thickness: 8 mmlateral. Discharge i. Stand: 50 mmSheet metal passage: 16 mmCutting angle adjustable: 2 ° 30 - 0,5 °Empty strokes: 25 - 32Number of hold-downs: 8Cutting pressure: 280 barHold-down pressure: 80 barOil filling: 300 lDrive power: 18.5 kWTotal connected load: 20.1 kWExternal dimensions: 2130 x 3260 x 2360 mmWeight: 5.8 tWith- CNC control SIEMENS S 5 for numerical sheet bending- Holding device mot- Sheet metal removal with conveyor belt- Cutting gap and cutting angle m. Control programmable- Spare knife- Schermesser for 750 kg strength- Separate hold-down z. Cutting after crack- Hold-down pressure adjustable and readable from the front- 2 rocker stops- Finger guard with recessed grip- balls in the support table- Angle stop m. Norius- Footswitchus ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

CNC sheet metal shears make EHT type TSS 4-20Fabr. -No: 107785, year of construction 1998Technical specifications:Working length: 2020 mmmax sheet thickness at 450 N / mm 4 mmOil volume: 160 lelectr. Connection: 400 V, 50 HzDrive line: 7.5 kWDimensions approx: 2800 x 2150 x 2150 mm, weight approx: 4.5 tWith- CNC control ELGO P 8721- Hold-up device- Scrap chute- foot switch- automatic cutting angle- automatic cutting gap adjustment- 3 angle stops in front- Cutting line lightingin a little used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic CNC swing cut guillotine shears make KNUTH type KHT D 3006Year of construction 2018Technical specifications:Max. cutting length: 3100 mmMax. sheet thickness: 0.5 - 6.0 mmCutting angle: 1.3°Number of hold-down devices:16Stroke :105mmNumber of strokes per minute:15Working table height: 865 mmNumber of support arms:3Oil tank: 200LMotor power: 15 kWDimensions approx.: 4110 x 2200 x 2100 mmWeight approx.: 7300 kgwith- Sheet metal holding device- D-Touch 7 control with touch screen for motorized backgauge 1000 mm and intersection- foot switchlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheet Metal Shear Make MENGELE Type S 4 - 5000/3Machine -No: S 2237 5000/3 Year 1976Cutting length: 5050 mmMax. Sheet thickness: 3.0 mmlateral. Discharge: 300 mmCutting angle: 0.6 °Strokes per minute: 34Number of hold-downs: 22mot. backgauge: 0 - 1000 mmlateral. Angle stop: 2000 mmOperating pressure: 230 barHold-down pressure: 58 barOil filling: 200 lDrive power: 11 kWOutside dimensions approx: 5750 x 2500 x 1700 mmWeight approx: 15 tWith- mot. backgauge- Angle stop front- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydr. Sheat metal Shear make EHT type EHS 6-50Machine -No: 19782 Year 1983Max. Sheet thickness: 6.0 mmCutting length: 5050 mmKnife length: 5100 mmCutting angle: 1 - 15 °Knife strokes per minute: 18Number of hold-downs: 26Pressure p. Hold down: 60 barOperating pressure: 280 barOil filling: 220 lDrive power: 12 kWWeight approx: 11 tOutside dimensions approx: 5500 x 2900 x 2100 mmWith- mot. back gauge 1500 mm with length indicator- Cutting angle indicator- Cutting angle adjustment- Cutting length limit- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make LOTZE type TS 3000/5machine -No: 2623003 year 1975Technical specifications:Max. Effective length: 3040 mmMax. Sheet thickness steel: 5.0 mmMax. Sheet thickness stainless steel: 3.0 mmOutside dimensions approx: 3750 x 1255 x 1600 mmWith- motor backgauge with handwheel fine adjustment- Cutting length limit- Angle stop front- Table extension- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swing cut guillotine shears make HERA type HSS 3Machine -No: 557 built in 1984heavy, unbreakable all-steel designTechnical specifications:Passage: 1100 mmLarge sheet thickness at 400 N / mm 2.0 mmThroat: 200 mmNumber of strokes: 56 H / minStop length at the front: 1000 mmStop length at the back: 1000 mmMotor power: 2.2 kWWeight about 1500 kgDimensionswith- motorized backgauge- foot switch- front support arms- hydr. Hold-downused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swing cut sheet metal shears make RAS type 52.31Fabr. -No: 23/7, built in 2000Technical specifications:Cutting range up to: 3100 mmmax.sheet thickness: 2.0 mmNumber of strokes per minute: 37Cutting angle: 0.9 degreesDrive power: 3.0 kWExternal dimensions approx L x W x H: 3580 x 1700 x 1220 mmWeight approx .: 1950 kgwith- CE marking- Angle stop in front- 2 table extensions- foot switch- Single stroke - continuous run- Cut material switch via hand leverwithout back gaugeused, in good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized crank sheet metal shears make FASTI type 507 15-3.5Machine -No: 84517010 built in 1984Technical specifications:Cutting length: 1540 mmmax.sheet thickness: 3.5 mmAdjustment range of backgauge: 1500 mmStrokes per minute: 56Drive power: 7.5 kWWeight approx: 1610 kgwith- Front-operated motor stop with digital display and 1 dimension preselection- foot switch- single stroke - continuous stroke - jogging- Side stop 750 mm- 2 table extensionsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized sheet metal shears make RAS type 83.25Machine -No: 27/10Technical specifications:Cutting length: 2540 mmSheet thickness max.: 3.0 mmNumber of strokes per minute: 50Cutting Angle:1.35°Table width: 430 mmTable height: 750 mmlateral projection: 100 mmRear stop adjustment: 550 mmDrive power: 5.5 kWWeight approx.: 2.5 twith- manual backgauge- manual adjustment of the back gauge from the front with reading scale- foot switch- angle stop- support arms- Tilting roller tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

working width: 1380 mm workpiece height: 70 mm : total power requirement: 45 kW weight of the machine ca.: 5.500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 1015 mm material thickness: 1 mm speed: von Hand weight: 240 Kg dimensions: 1420 x 600 x 750 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 305 mm material thickness: 1,0 mm speed: von Hand weight: 45 Kg dimensions: 500 x 340 x 420 m Combined sheet metal working machine with: - Bending, tool widths 25 - 50 - 75 - 75 - 105 mm. - Rolls, roll diameter 38 mm - scissors, max. 1015 x 1mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sheet metal shelf, screw shelf, storage shelf, screw shelf -Execution: stable -Dimensions: 620/1420/H1400 mm -Own weight: 260 kg

Jeros sheet metal cleaning machine Type: 5015 for 2 edge sheets 60x40 and 58x78cm with rear return for the sheets Stainless steel cladding on rolls 380V 50Hz Height: 103cm Width: 90cm Depth: 80cm

Sheet metal cleaning basin FrischManufacturer : FrischType : SpritzmaticExternal dimensions : W: 122cm D: 33cm H: 86cmInterior dimensions : W: 102cm D: 29cm H: 70cmCleaning for 60x40cm and 60x80cm wide trays on rollsDetails see picture  

Sheet Metal Plastering Machine KD PutzManufacturer : KD PutzType : AVIDI 800240/400Volt 50Hz 1,1kW 4,0AZum cleaning of 2-sided baking and perforated trays.Chassis completely made of stainless steela dirt drawer made of stainless steelfor 58x78cm wide trays on wheelsBaker's conditionDetails see picture

KD sheet metal cleaning machine Type: KD Plaster for 2-edge sheets double brush Restitution Emergency Stop Switch Stainless steel cladding on rolls

Sheet Metal Plastering Machine KD PutzManufacturer : KD PutzType : II A.M.K240/400Volt 50Hz 1,1kW 4,0AZum Cleaning of 2-sided baking and perforated trays.Chassis completely made of stainless steela dirt drawer made of stainless steelfor 58x78cm wide trays on rollsBaker's condition