sheet metal bending used for sale

Working length: 2050 mm Round bending: 5 mm Bending: 4 mm Top roller: Ø 150 mm Under-roll: Ø 225 mm Equipped with: - Profile iron bending device - Sentences Profielrollen -Operating instructions Motor power: 3 kW Machine LxWxH: 3300 x 1050 x 700 mm Machine weight: 2000 kg

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1600 mm plate thickness: 16,0 mm ST pre-bending: 13,0 mm ST diameter of upper rolls: 230 mm side roll diameter: 0 mm diameter of lower rolls: 0 mm total power requirement: 0 kW weight of the machine ca.: 0 kg. dimensions of the machine ca.: 0 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution ...

sheet width: 2050 mm plate thickness: 4,5 mm max. plate thickness: 4,0 mm anbiegen roll length: 2050 mm min. dia.: 210 mm roll diam. toproll: 140 mm weight: 1550 kg range L-W-H: 3220 x 1200 x 900 mm Exhibition machine - unused (!) Special price on request List manufacturer price: 21.400 euros Machine with special equipment Furnishing: - Electrically driven top and bottom rollers - Top roller can be swung out, with folding bearing - Conical bending device - asymmetrical roller arrangement - self-braking main motor - separate control and operating panel - Profile inserts in the rollers - Safety line - User manual in German - CE mark / declaration of conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - digital position display for the rear roller - 2x bending speeds The data for this ad was created with ModulMWS - the software sol ...

sheet width: 1290 mm plate thickness: 6 mm pre-bending: ja roll diameter: 140 mm roll speed: 1 - 6 m/min total power requirement: 2,2 kW weight of the machine ca.: 1120 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9654 : prompt, Zwischenverkauf v : Türkei : 2400 € : 1 : 1 : 1050 mm : 1 mm : 56 mm : 1400 mm : 700 mm : 1120 mm : 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-roll bending machine SCHÄFER type SRMVS Masch. Nr. Year of manufacture: 1973 , sheet length: 2000 mm, sheet thickness: 16 mm, top roll, diameter 250 mm, bottom roll, diameter 230 mm , roll speed 7 rpm. Rolling speed approx. 5 meters min. Mains connection 380 volts, 50 Hz. - all 3 rollers driven - symmetrical roller arrangement - motorized upper roller adjustment- conical bending via inclined adjustment of the upper roller with coupling for one-sided adjustment - lateral start-up for conical bending - motorized lower roller adjustment , individually for the front and rear roller- right and left rotation via control button in the control panel - swing-out hinged bearing and spindle support to relieve the upper roller Dimensions L x W x H 4200 x 1900 x 2200 mm Weight 10.6 ton. good condition; used

: neu : ca. 12 Wochen ab Auftrags : Türkei : 60500 € : 2050 mm : 16 mm : 16 mm : 13 mm : 10 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1460 mm : 1550 mm : 6000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 59000 € : 2550 mm : 10 mm : 10 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1425 mm : 1470 mm : 5700 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created ...

Ref.nr. 00766 Description of the plant Used press brake Manufacturer: Hämmerle M+S Brugg AG Model AP 100 – 2100 Year of construction: 1991 Max. pressing force 1000KN Max working length 2100mm Max. stroke 400mm Projection 300mm Mass Weight 11500kg Operating voltage 380V 50Hz Control voltage 24V Total connection 23 KW Nominal current of the back-up fuse 63 A

: neu : ca. 12 Wochen ab Auftrags : Türkei : 49000 € : 994.7 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll leng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 27000 € : 548.1 € : 1050 mm : 2.5 mm : 2.5 mm : 2 mm : 90 mm : 4,5 m/min : 2.2 kW : 2250 mm : 1000 mm : 1500 mm : 900 kg FOR ROUND AND ELEPTIC SHAPES FOR MASS PRODUCTION (CYCLE UP TO ONLY 20 SEC POSSIBLE) 4 rolls NC control with touchscreen Top roll driven by hydromotor and plantary gearbox Hydraulic drop end Mobile control panel Hardened rolls Operating manual in English or German OPTION: Feeding table price on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 21600 € : 442.8 € : 1 : 1 : 2030 mm : 6 mm : 6 mm : 5 mm : 170 mm : 4 kW : 3600 mm : 1020 mm : 1120 mm : 2400 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2023 : 9659 : prompt, Zwischenverkauf v : Türkei : 18000 € : 369 € : 1 : 2050 mm : 3 mm : 130 mm : 3,5 m/min : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS: Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3550 mm

Ref.-No.00804 Description Hydraulic Press Brake Tools included Manufacturer: EHT Type EHT VarioPress 320 Year of construction 1997 1997 Pressure infinitely adjustable: 3200 kN 320 tons max. working width: 3550 mm 3550mm Working width between uprights: 3050 mm Stand projection: 350 mm Table height: 900 mm Plunger stroke: 270 mm Plunger bevel adjustment: 15 mm With crowning device and quick-clamping device for upper tools Lifting speed: empty 100 mm/s, under load: 10 mm/s, retraction: 100 mm/s Control: DNC 80 PC ( DNC 84 PS= 4 axes

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3100 mm, 2 mm, 10 mm

Swivel bending machine Cidan Type: K25-30 YOC 2018 Top Condition At call The CIDAN K25-30 is a quick and easy-to-use bending bench consisting of a robust, fully welded steel construction with cast iron side frames. The K25 is designed for continuous operation under the most demanding conditions. With its dual drive, this machine covers a wide range of different applications in the manufacturing industry. Folding Length: 122" (3100mm) Folding Capacity Steel: 2.00 Folding capacity stainless steel: 1.20 Folding Capacity Aluminum: 3.00 Opening height – tension beam: 135 mm Motor – tension beam: 1.5 kW Motor – folding beam: 1.5 kW Dimensions: 4190 mm x 1600 mm x 1700 mm Weight: 3.685 kg The machine can be viewed and tested at any time.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6800 € : 140.76 € : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 23000 € : 471.5 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40500 € : 822.15 € : 2050 mm : 8 mm : 8 mm : 6 mm : 6 mm : 4 mm : 180 mm : 180 mm : 150 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3790 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of roll length  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 45900 € : 931.77 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % o ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 19600 € : 401.8 € : 1530 mm : 6 mm : 6 mm : 4 mm : 150 mm : 4 kW : 3100 mm : 1120 mm : 1020 mm : 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: . mm plate thickness: . mm pre-bending: . : verstellbar weight of the machine ca.: 150 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 126200 € : 2511.38 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solu ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 58900 € : 1183.89 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 66200 € : 1330.62 € : 3100 mm : 8 mm : 8 mm : 6 mm : 6 mm : 5 mm : 240 mm : 240 mm : 190 mm : 825 mm : 11 kW : 4880 mm : 1160 mm : 1200 mm : 6450 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls ar ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 78900 € : 1585.89 € : 2550 mm : 15 mm : 15 mm : 13 mm : 12 mm : 12 mm : 10 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 4760 mm : 1660 mm : 1155 mm : 8950 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll le ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 92800 € : 1865.28 € : 3100 mm : 16 mm : 16 mm : 13 mm : 16 mm : 14 mm : 12 mm : 300 mm : 300 mm : 240 mm : 50 mm : 1140 mm : 18.5 kW : 5310 mm : 1660 mm : 1140 mm : 11100 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software sol ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 89400 € : 1796.94 € : 3100 mm : 13 mm : 12 mm : 8 mm : 13 mm : 10 mm : 10 mm : 8 mm : 270 mm : 270 mm : 230 mm : 50 mm : 1155 mm : 15 kW : 5310 mm : 1660 mm : 1590 mm : 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software ...

roll surface width: 3000 mm length: 5000 mm width: 2000 mm height: 2100 mm side roll diameter: 300 mm material strength at pre-bending: 18 mm : 3 Bending speed: 0-5 °/sec output: 20 kw weight of the machine ca.: ca. 13000 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3048 mm

Ref.Nr. 00810 Name of the plant Bending Center Manufacturer: Salvagnini Model P4 2525 Year of construction 2006 Description according to order confirmation at the time of purchase Scissor table Feeder destacker Bending center Programmable hold-down device Upper bending beam Lower bending tray Control unit Control for auxiliary bending cheeks CLA tool kit Swivel device for auxiliary tools Option for cutting and spreading profiles Dispensing device / buffer for panels Water-air cooling unit Scissor table Maximum dimensions of stackable PCBs 3048x1524mm Maximum height of stackable package incl. pallet 350 mm Usable load capacity 5000 kg Vertical lifting distance 550mm RVA - Feeder-Destacker Max. dimensions of metal sheet 3048x1524mm

Description: working length: 2000 mm max. sheet thickness: 2 mm machine is in good technical condition, after previous agreement the possibility of testing Approx. Onsite Dimension. (l x w x h): 2,780 x 640 x 1,390 mm, weight approx.: 2,300 kg

Labeling sheets, 5x 10 sheets SIEMENS S7-SmartLabel 2x 6ES7 392-2AX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: petrol, for 16-channel modules 1x 6ES7 392-2AX10-0AA0 ( 6ES7392-2AX10-0AA0 ) Color: petrol, for 32-channel modules 1x 6ES7 392-2CX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: yellow, for 16-channel modules 1x 6ES7 392-2CX10-0AA0 ( 6ES7392-2AX10-0AA0 ) color: yellow, for 32-channel modules New ! Dimensions ( packaging ): 300 x 220 x 30 mm

Aluminum tear plate, aluminum checker plate, checker plate, checker plate -Material: aluminum -Dimensions: 1500 x 2160 mm -Sheet thickness: 2.5 mm -Tear thickness: 4.0 mm -Number: 30 pieces of checkered plate available -Price: per piece -Weight: 24 kg/piece

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Key data: 40

Shearing capacity: 40 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make: GEKA Type: Hydracrop 80 SD YOP: 2010 Large package tooling 5 Working stations 2 Foot switches Stroke adjustable:     70mm Punching force:        80T Capacity Ø x thickness:40 x 20 mm Cutting force:         150T Throat:                500mm Capacity L profile:    130 x 130 x 13 mm Power:                 9kW Length:                2.200 mm  Width:                 1.200 mm  Height:                2.200 mm  Weight:                2.800 kg

We offer you here a sheet metal cleaning machine from Jeros, for plates 60x80. If you have any questions or questions, we are happy to provide you with Delivery at an additional cost possible

for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Punching nibbling machine

Type: RWM 800 For boxes 600x800 mm Capacity: 500 pcs/h For self-disassembly in 62118 Monchy le Preux, France

Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN

sheet metal cleaning machine from Schlee. The machine was built in 2011. Sheets up to 58 cm wide are suitable. Schlee sheet metal cleaning machine Type: Uni-58 Built in 2011 for sheets up to 58 cm wide cleans / brushes oiled mobile on wheels m. fixed Stainless steel More information on request. Dimensions: Height: approx. 115 cm Width: approx. 150 cm Depth: approx. 89 cm