We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,590 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
LASER PRIMA INDUSTRIE Mod. 2D/3D DOMINO Year 2006 1500x3000 2.5 kw 22,000 working hours Visible in operation No loading and unloading
used
Approx. Onsite Dimension. (l x w x h): 1,173 x 1,123 x 1,136 mm, weight approx.: 330 kg
used
Description: mechanic Approx. Onsite Dimension. (l x w x h): 600 x 660 x 2,005 mm, weight approx.: 133 kg
used
Description: .DIMECO R 693 J+ sheet metal straightening machine y.o.m 2020! - Number of straightening rollers 17 - Number of pull rollers 2 - Pull rollers diameter 180 mm - Number of support rollers 147 - Largest roller distance 200 mm The machine is equipped with: - Control cabinet with drive outlets for height adjustment on the inlet/outlet side of the straightening cassette as well as for the two main drives connected in parallel - Hydraulic unit for the hydr. Movements of the infeed table and the delivery of the infeed driver - Support rollers firmly installed at the top and bottom - Documentation, digital only! - Additional, unused straightening roll cassettes with 17 straightening rolls and intermediate rolls at the top and bottom. The machine was until lately integrated into a fully automatic punching line, therefore it is necessary to complete the control system. There is al ...
used
working width:1400 mm Workpiece thickness max.: 80 mm work height max.:1000 mm Feed speed:4m/min I Stufe, 8 II Stuf m/min. Required air-pressure:max. 5 bar voltage:50 Hz, 380 V workpiece length:320 mm workpiece thickness min.:1 mm weight of the machine ca.:3500 kg Documents:vorhanden
used
working width:880 mm workpiece height:1- 70 mm work height max.:1000 mm Feed speed:4- 8 m/min. voltage:50 Hz, 400 V weight of the machine ca.:2.800 kg dimensions of the machine ca.:2500 x 1715 x1675 mm width:min. 350 mm Sanding cylinder diameter:420 mm electr. connected load:20 KW Required air-pressure:1 x R3/ 8 " pressure:5 bar tank:des Bandfilter ca.200 l automatic magnetic filter unit:vorhanden grinding tools:1540 x 900 mm accessories::9 Bänder Documents:vorhanden
used
Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg
used
Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,00 mm Positions ATC: 0 OMERA - R 4 / 12 Trimming machine Ø 1200 x 4 mm MACH - ID 6365 Make: OMERA Type: R 4 / 12 YOP: 1990 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Max. workpiece 1200 Ø Maximum sheet thickness 4 mm Length 3.000 mm Width 1.600 mm Height 2.300 mm Weight 2.500 kg
used
Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,0 mm Positions ATC: 0 SPECIFICATIONS Controll Conventionel Hydraulic / Mechanical Hydraulic Capacity Ø x plate thickness Ø 6 - 42 mm Cutting lenght L = 6.000 mm mm DIMENSIONS Length 7000 mm Width 1500 mm Height 1500 mm Tubomat 642 bending centre for processing pipes. You can do also Sawing, Deburring, flaring. Tubomat is belonging to the company Tracto technik who is specialised in tube bending machines like the tubomat and tubobend, tubotron.
used
Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 8,0 mm Positions ATC: 0 Make Eckold KF 665 Type KF 665 Year 90 er Kraftformer Forming = 8 mm Ram = 0 - 80 mm Speed = 150 / 300 / 600- Model with Potentiometer; limits reverse motion time - Foot switch for motorised adjustment ram - 1 machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening
used
Description: serial number B239002 , press force 1500 kN , sheet thickness: 0.5-15 mm bending lenght 4050 mm maximal stroke 1760 mm maximal working pressure 205 bar distance between columns 3150 mm distance from ram to bed 420 mm troath depth 400 mm power of main motor 11 kW supply / frequency 400 V, 50 Hz approach speed 80 mm/sec working speed 6 mm/sec return speed 45 mm/sec Approx. Onsite Dimension. (l x w x h): 4,280 x 1,545 x 2,500 mm, weight approx.: 12,925 kg
used
Swivel bending machine, cant bench, gutters, roof gutters, beading machine, beading machine, three-roller round, three-roller sheet metal bending machine, bending machine, sheet metal round bending machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine -Swivel bending machine: with 3-roller bending machine on a solid base -Max. Working width: 1020 mm -Max. Sheet thickness: 1.5 mm -Roller diameter: 2x 50 mm / 1x 53 mm -Dimensions: 1450/800/H1155 mm -Weight: 346 kg
used
Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used
used
Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg
used
Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg
used
Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/15/H57 mm -Total weight: 15.7 kg
used
Bending tool, die, lower knife, lower tool, lower beam -Bending tool: from Lotze HDZK swivel bending machine -Widening: for lower cheek -Dimensions: 2487 x 100 x 15 mm / 190 x 100 x 15 mm -Hole spacing: 100 x 18 mm -Transport dimension: 2487/100/H30 mm -Total weight: 29.4 kg
used
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: for folding machine RAS Typ 74.30 -Dimensions: see the drawing in the photos -Distance recess rail: center center 650 mm -Dimension: 3060/28/H121 mm -Weight: 65kg
used
used
Upper tool - bending tool for die bending machine GEWA Press brake set: 15 pieces Type: GWP-1291 Angle: 88 Radius: 0.8 mm Segment height: 200 mm max. pressure per meter: 85 t/m Total length of the 15 segments: 4010 mm Segment lengths: 6 x 505 mm, 1 x 400 mm, 1 x 190 mm, 1 x 100 mm, 1 x 69 mm, 1 x 58 mm, 1 x 48 mm, 1 x 42 mm, 1 x 40 mm, 1 x 33 mm Total height with tool holder: 230 mm Tool holder: 30 x 13 mm, 8.4 mm groove Weight: 260 kg very good condition Suitable lower tool under stock number 60752. Tool set suitable for AMADA, TRUMPF and LVD press brakes with appropriate tool system; used
used
BOGENSORTIERANLAGE Manufacturer Gremser Type: S102-A2 Manr.: 410663 Built: 1999 Maximum size width: 102 cm Length: 142 cm Minimum size width: 40 cm Length: 50 cm Material grades 60 g / m2 to 120 g/m2, securities Arc Alignment +-0.1 mm Processing Minimum: 30 m / min Maximum: 140 m / min Maximum power 140 cycles / min Maximum stack height feeder: 1550 cm Good sheet display: 1600 cm Poor bow delivery: 1100 cm Maximum lifting weight 1000 kg Supply voltage 500 V AC Machine weight 2000 kg Dimensions: Width: 190 cm Length: 1220 cm Height: 270 cm Inlet height: 1750 mm Note: Sorts sheets of paper with quality defects (holes, stains, scratches and other irregularities, damage ? Total fault diagnosis was renewed in September 2005 Investment costs: 156,000.00 € Mistakes reserved!
used
Trapezoidal sheets - RAN 35/207 for roof and wall from 5,70 / m² (net) Profiled sheeting produced steel profiled sheets to measure! In thickness 0.50 mm (similar to RAL 3009) and a minimum order quantity of 1001,00 m², with us, get special items produced to measure. At a quantity up to 100.00 m² (sheet thickness 0.50 mm) = 6,23 / m² (net). At an additional cost of 2.22 m (net) get m² us also with Antikondensbeschichtung (anti drip coating/nonwoven coating). Prices for corrugated sheets as special items to measure direct from the manufacturer Special items Checkout, payment & pick up/delivery Only our terms and conditions, available at abc.ranrode.com, are based on our offer. We again expressly please indicate that our offer includes no technical editing (auditable statics, laying, color concepts, etc.). Therefore, we advise to statically verify our offer befor ...
used
<br>Hand system 15 stations f r Calendar production<br><br>Still in operation: No.<br>Available: immediately
used
Powerful rolling machine in very good condition.
used
Roll-out machine from Seewer Bandwidth: 600 mm Band length: 3250 mm Condition: very good
new
24 months warranty TOP value for money . Robust, mobile base dough sheeter, mounted on castors with locking For all types of dough (or marzipan) to roll out and laminating PVC conveyor belt, quick and easy to clean Speed: 50 cm / sec Band width: 520 mm Conveyor belt length: 980 mm on each side = 1960 mm Foldable table left and right Roller adjustment 1 mm up to 30 mm Engine power: 0.55 kW 220/380V - 3Ph - 50 Hz - 16A-CEE connector Folded dimensions: 1200 x 1030 x 1750 mm WxDxH Working dimensions: 2610 x 1030 x 1070 mm WxDxH Weight: 158 kg additional performance of bak-tec including: DGUV V3 tested (formerly BGV A3) with certificate
new
Dough Sheeter -NEW- - Model: TA520 - Z - Table model - Band width: 520 mm - With plastic tapes - Condition: New - Warranty: 12 months
Much sheet saw with Electr. Width adjustment from 1 sheet Chain width 250 mm unit 220 mm cutting height of 150 mm 15 kw motor
used
new
24 months warranty TOP value for money . Robust table sheeting machine for all kinds of dough, and marzipan suitable for sheeting and laminating PVC conveyor belt, quick and easy to clean Speed: 50 cm / sec Band width: 520 mm Conveyor belt length: 670 mm on each side Foldable table left and right Roller adjustment from 1 mm to 30 mm Engine power: 0.55 kW 220/380V - 3Ph - 50 Hz - 16A-CEE connector Folded dimensions: 850 x 940 x 670 mm WxDxH Working dimensions: 1460 x 940 x 580 mm WxDxH Weight: approx. 100 kg additional performance of bak-tec including: DGUV V3 tested (formerly BGV A3) with certificate
new
Dough Sheeter -NEW- - Make: RONDO - Model: SSO-Z 630 - Band width: 633 mm - Roll length: 660 mm - Rollers opening: 3-45 mm - Condition: New - Warranty: 12 month
used
Hydraulic safety lock from an overload: 125-250 tons Number of idle slide strokes per minute: -For the head press: 20 -For the subsequent press: 25 Number of microdrive strokes per minute: 0,45 Electric motor for the press table: 45 kW Electric motor for the microdrive: 17 kW Max. balancing weight of the upper part of die on the slide: 3,5 tons Distance between columns: 2550 mm Slide stroke: 400 mm Max. extract depth: 160 mm Slide adjustment: 250 mm Adjustment range of the extract depth: 0-160 mm Max. closed height: 800 mm Height of the pull-out table: 500 mm Table dimensions: 2500x1250 mm Table bore dimensions: 2100x850 mm Slide dimensions: 2500x250 mm Weight: 74500 kg
used
Capacity: 50 mm x 15.0 mm in manor, drive: by hand, with substructure, 150 kg; good, ready to use
used
Manufacturer:AMADA Feed speed continuous 0 - 31 m/min Without grinding belt ; Without grinding belt fuehrung
new
New machine 24-month warranty Benefits: + TOP value for money + ideal for semi-professional baker + manual, compact table roll-out machine with robust hand crank / folding handle + Eco-model, maintenance-free as no motor + suitable for all types of dough for rolling out and touring + Steel rollers and scrapers in high quality + without conveyor belts, instead with stainless steel trays + Trays can be folded up on the left and right + Scrapers can be easily removed without tools + rolls out up to 3.5 kg of dough + fast spare parts supply within 1-2 business days Technical data: - Roll-out width: 520 mm - Table length: 485 mm = 970 mm each - Roller adjustment: from 1 mm to 50 mm (depending on the product) - Dimensions: --- working position: 1050 x 845 x 500 mm (WxDxH) --- rest: 410 x 845 x 858 mm (WxDxH) - Net weight: 60 kg
used
(side-front moving table) Nominal force: 1000 ton Slide stroke: 400 mm Continuous slide strokes per 1 min: 20 Single slide strokes per 1 min: 16 Shut height: 1060 mm Slide adjustment: 320 mm Table dimensions: 3150x1800 mm Slide dim., front-back: 1700 mm Window H 1500 x W 1900 mm Hydro pneumatic cushion in table clamping force at P = 0.42 MPa (P = 4.2 kg / cm2), kN 2000 ejection force P = 0.45 MPa (P = 4.5 kg / cm2), kN 200 Main-drive electric motor power: 132 kW DIMENSIONS: 5150x4700x11400 H floor7830 mm WEIGHT:193 ton
new
New machine 12-month warranty Benefits: + robust, compact table roll-out machine + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 475 mm - Roll width: 500 mm - Table length: 1,560 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Engine power: 0.75 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 1560 x 940 x 535 mm (WxDxH) --- rest: 670 x 940 x 710 mm (WxDxH) - Net weight: 85 kg
new
New machine 12-month warranty Benefits: + robust, compact table roll-out machine + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 475 mm - Roll width: 500 mm - Table length: 2,055 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Engine power: 0.75 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 2055 x 940 x 535 mm (WxDxH) --- resting position: 850 x 940 x 810 mm (WxDxH) - Net weight: 95 kg
new
New machine 12-month warranty Benefits: + robust, compact table roll-out machine + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Stainless steel tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 605 mm - Roll width: 633 mm - Table length: 2,420 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 1 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 2420 x 1072 x 535 mm (WxDxH) --- rest: 1220 x 1072 x 1100 mm (WxDxH) - Net weight: 110 kg
new
New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 475 mm - Roll width: 500 mm - Table length: 1,660 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Engine power: 0.75 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 2000 x 940 x 1330 mm (WxDxH) --- resting position: 755 x 940 ...
new
New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons + suitable for all types of dough for rolling out and touring + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 605 mm - Roll width: 633 mm - Table length: 2,420 mm - Roller adjustment: from 0.5 mm to 30 mm (depending on product) - Speed: approx. 50 cm/sec - Motor power: 1 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CEE plug - Dimensions: --- working position: 2900 x 1072 x 1330 mm (WxDxH) --- rest: 1240 x 1072 x 1900 mm (W ...
new
New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons and reversier lever sprouts possible + suitable for all types of dough for rolling out and touring + with integrated electric motor + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Hand reel supports left and right + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 640 mm - Roll width: 660 mm - Table length: 2,720 mm - Roller adjustment: from 0.2 mm to 45 mm (depending on product) - Speed: approx. 65 cm/sec - Engine power: 1.1 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CE ...
new
New machine 12-month warranty Benefits: + robust, mobile socket roll-out machine + with stainless steel tables + easy to drive, with steering wheels and locking feet for stable grip + Operation with push-buttons and reversier lever sprouts possible + suitable for all types of dough for rolling out and touring + with integrated electric motor + Tables can be folded up on the left and right + Scrapers can be easily removed without tools + Machine is equipped with 1 hand reel as standard + Hand reel supports left and right + with dough collection plates on both sides + fast spare parts supply within 1-2 business days Technical data: - Bandwidth: 640 mm - Roll width: 660 mm - Table length: 3,320 mm - Roller adjustment: from 0.2 mm to 45 mm (depending on product) - Speed: approx. 65 cm/sec - Engine power: 1.1 kW - Connection values: 400 V - 3Ph - 50Hz - Fuse: 16A-CE ...
used
Capacity, ton 630 Ram stroke, mm 300 Ram adjustment, mm 220 Number of strokes per minute 15 Table dimensions, mm 1100 x 1500 Slider dimensions, mm 1000 x 1250 Distance between table and slider in its lower and upper adjustment position, mm 650 Ram ejector stroke, mm 100 Capacity of hydro cushion, ton 55 Stroke of hydro cushion, mm 150 Main motor power, kW 55 Press weight, kg 63000
used
The force of 500 tons. stroke 305 mm. Adjust slide bar 254 mm. Distance between table and slide 485 mm. Distance between columns 3050 mm. Table size 2740 x 1370 mm. Pusher in table 155 mm. Maximum press height above floor level 6900 mm. Power 37 kW. Number of RAM strokes 12 strokes/min. Weight 93 tons.
used
Capacity: 250 ton Slider stroke: 400 mm Number of strokes per minute: 25 Table dimensions: 2500x1250 mm Slider dimensions: 2500x1250 mm Distance adjustment between table and slider: 250 mm Distance between table and slider in its lower and upper adjustment position: 800 mm Clamping plate thickness: 100 mm Hydro-cushion: -Force: 46 ton -Stroke: 160 mm Weight: 70 ton
used
We offer you here a dough Sheeter. Producer: Salem Rondo Type: Combi 613 Dimensions of the straps: - width: 60 cm if interested and for more information we are available.
Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )