129,383 used machines on RESALE, but how to find them? Machine Search
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm weight: 1265 kg dimensions: 2670x1110x1050 mm Domestic equipments: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - induction hardened rolls - motorized rear roller adjustment - Digital display for back roller The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Seewer Rondo roll-out machine Type: SSO 62 Fully automatic roll-out machine with reel / winder with flour spreader digital control Band width: 58cm on castors with locks tested & cleaned Height: 140cm Width: 300cm Depth: 110cm
Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...
Min-max cutting width: 250-1150 mm Max reel width: 1200 mm Reel weight: 1100 kg Internal core: 70/76 Max reel diameter: 1050 mm Max speed: 195 m/min Power 400 V, 50 Hz Air 6 bars Double reel unwinder Double photocell/register control Touch screen control panel for cutting on size starting from reel to sheet Materials: ALU, plastic film, paper from 10 to 250 grs, laminates and tissue paper, paper + cardboard, adhesives, shoppers paper, gift paper, offset paper, wrapping paper for pastry, washing etc.. plastic film from 30 to 200 my like PE, pvc, PP, polyester, celluloid, others Electronic counter of pieces
Roll-out machine Kombi WLS Jewel Model: 16 CW for all doughs for rolling out and touring Infinitely variable roller adjustment Pull-out table left and right Active pressure plate with manual adjustment with long roller / long knitter below with tow for wrapped products Dough roll-out machine can be driven with locking device With flour container Connection 400V, 16A-CEE plug Used machine cleaned 6 months warranty Visit our large Bakery Machinery Center.
Various parts for straightening machines Ungerer, strip width 1500 - 1700 mm - Straightening rollers, stutz rollers, bearing frames, coupling shafts .. - Gears - Engine - Gearboxes, etc. More info on request
Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal clamp: clamping range up to 85 mm -Load capacity: kg -Dimensions: 300/80 / H330 mm -Weight: 13 kg
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 30 mm -Load capacity: kg -Dimensions: 250/100 / H460 mm -Weight: 20 kg
REF-2390 CIM AUTOMATIC DOUGH SHEETER Manufacturer: CIM BAKERY EQUIPMENT S.r.l. Type: ROLLMAX TS 700 Year: 2000 Power: 1kW Voltage: 400V / 50Hz 2 belt conveyors. Dimensions: 660mm width, 1,500mm length (each belt) Overall dimensions: 1,300mm width, 3,650mm length, 1,350mm height
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, plate gripper -Sheet metal claw: clamping range up to 35 mm -Load capacity: 4 t -Dimensions: 230/110 / H450 mm -Weight: 22 kg
Polycarbonate, plexiglass, acrylic glass, acrylic glass -Plastic panels: transparent -the panels are covered on both sides with protective film -the panels can be cut with guillotine shears -the panels are flexible but not suitable for bending -Length: 3000 mm -Width: 2000 mm -Thickness: 2 mm -partly slight damage to the edges -Number: 20x pieces available -Price: per piece -Weight: 14.5 kg/piece
4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.
Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts
Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration
Stacking boxes, stacking boxes, steel boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -Sheet metal container with: lid -Dimensions: 615/800/H910 mm -Weight: 54 kg
Seewer Rondo Doge Sheeter Type: SSO 62 Fully automatic sheeting machine Year of construction 2003 digital control Band width: 58cm Tapes as good as new on wheels with locks Height: 120cm Width: 280cm Depth: 120cm
Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...
Seewer Rondo Doge Sheeter Type: SSO 62 Fully automatic sheeting machine Year of construction 1999 digital control Band width: 58cm Tapes as good as new on wheels with locks Height: 120cm Width: 330cm Depth: 120cm
composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...
Seewer Rondo SKO 67 Combi Sheeter Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation - mobile on wheels - Machine is functional More information and pictures on request
Jeros 6015 TRAY CLEANING MACHINES
Sheeter Seewer Rondo SSO 62 - with digital control - mobile on wheels with lock - with fold-up straps - Band width: 62cm
Rubber mat, rubber sheet, rubber stop, stop plate, rubber cover, rubber pad -Rubber cover: Rubber pad -Thickness: 30/6 mm -Length: 634 mm -Width: 100 mm -Height: 130 mm -Quantity: 18 pieces available -Price: per piece -Weight: 3.8 kg/piece
Dough sheeter Fritsch Rollfix - used Fritsch Rollfix sheeting machine - with 61cm bandwidth - right left rotation - with manual and foot switch - Band length 116cm each External dimensions approx.: Length: 244cm Width approx.: 80cm Height: 110cm
sheet width: 1290 mm plate thickness: 6 mm pre-bending: ja roll diameter: 140 mm roll speed: 1 - 6 m/min total power requirement: 2,2 kW weight of the machine ca.: 1120 kg Asymmetry roll arrangement, pre-bending ist possible. This new machine is in the following sizes obtainable: working length from 1040 until 2540 mm, max. plate thickness ( 400 N/mm² ) from 1 until 6,5 mm. We are distributor only for Germany. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -with chain: 1.3 m -Span width: 44 to 70 mm -Load capacity: 6300 kg -Dimensions: 300/460/H120 mm -Weight: 30 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 40 mm -Load capacity: 9000 kg -Number: 1x terminal available -Weight: 28 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 55 mm -Load capacity: 9000 kg -Number: 2x terminals available Price: per piece -Weight: 28 kg/piece
Combi sheeter Seewer Rondo SKO68 Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation -left strap extendable -Hinged straps - mobile on wheels - Machine is functionally tested and cleaned
Plate shears Cutting capacity 1 mm Cutting width 1.10 m Foot operation, the cross step is missing.
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 9000 kg -Weight: 32 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminal available -Price: per piece -Weight: 28 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Wingspan: 5 to 37 mm -Load capacity: 6000 kg -Weight: 22 kg
Seewer Rondo Cutting Line / Cutting Table Type: SPF602 with guillotine with multiple reels Strap width: 64cm, very good condition Stainless steel cladding on castors Dimensions: Height: 185cm Width: 660cm Depth: 80cm
guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 60 mm -Load capacity: 3000 kg -Number: 8 terminals available -Price: per piece -Weight: 16 kg/piece
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 50 mm -Load capacity: 5000 kg -Weight: 31 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 3 to 24 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
Jogger Make Bourg Model jogger Year 1995 Size 58 x 38 cm Height adjustable Angle adjustable Available direct
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 6 to 64 mm -Load capacity: 7 t -Dimensions: 300/460/H130 mm -Weight: 33 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Span width: 0 to 100 mm -Load capacity: 1250 kg -Number: 4x sheet metal clamps available -Price: per piece -Dimensions: 300/310/H80 mm -Weight: 13 kg
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece
Jogger - criss-cross delivery Make Bourg Model TA 860 Year 1995 Height adjustable Angle adjustable Details criss-cross function Available direct
Folding sheet press Tränklein BP; good condition; cleaned and tested; Working width 820mm. Bundling press Tränklein BP; good condition; cleaned and checked; working width 820mm.
Sheet metal shelf, screw shelf, storage shelf, screw shelf -Execution: stable -Dimensions: 620/1420/H1400 mm -Own weight: 260 kg
maximum number of results exceeded
please refine your search
10 € 
