sheet cutting used for sale

Description with exact angle system cutting width 50cm

Description heavy automatic hydraulic plate shears / guillotine shears up to 50mm with cycle feed Working width approx. 155cm Thickness max. 50mm

REF-2390 CIM AUTOMATIC DOUGH SHEETER Manufacturer: CIM BAKERY EQUIPMENT S.r.l. Type: ROLLMAX TS 700 Year: 2000 Power: 1kW Voltage: 400V / 50Hz 2 belt conveyors. Dimensions: 660mm width, 1,500mm length (each belt) Overall dimensions: 1,300mm width, 3,650mm length, 1,350mm height

4-roll plate bending machine Mod. VRM NG HY 3000x40 Country of manufacture: Switzerland YOM: 1997 Brand: HAEUSLER AG Roll diameter 560/540/400 mm Roll thickness 40mm Roll length 3000mm Motor motor Power:55kW System: Hydraulic Voltage: 380V/3 phase Weight 45 000kg The quality of the machine is still very good.

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 NT Year of construction 2003 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Side sweat monitoring - Foil holding plate Pwq9ya - Control: Siemens S7-300 - Operating terminal with Sütron BT20 - Welding punch with replaceable welding strip - Side welding wheel-knife combination, can also be exchanged for a knife system - Processable films PE and PO - Year of construction 2003 - Shrink tunnel Kallfass Standard - Gripper section with inline belt - Curved band can be ...

Kallfass Universa 400 with shrink tunnel and grab section Kallfass Universa 400 Year 2006 The system is immediately available. The Universa 400 is included in the price of the complete system. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - automatic length compensation to reduce the punch gap - Welding punch monitoring - Control: Siemens S7-300 - Operating terminal with Siemens touch panel - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel knife system - Processable films PE and PO - Year of construction 2006 - Kallfass Compact 450 SO shrink tunnel - Gripper section with inline belt - Book magazine on gripper section - Ionization for blocking loose leaves - Cur ...

Kallfass Universa 400 with shrink tunnel, SlipTorque roller belt and conveyor belt Kallfass Universa 400 built in 2005 The system is immediately available. The price of the complete system includes the Universa 400, the Schlichter shrink tunnel, a SlipTorque roller belt and a conveyor belt. The machine is technically overhauled and is in very good condition. Technical data: - Length of cross welding punch: 450mm - Welding punch passage: max. 200mm - Min. product length: 80mm - Metronic embossing system - Control: Siemens S7-300 - Siemens Touch TP277 operator terminal - Welding punch with replaceable welding strip - Side welding knife combination, can also be exchanged for a wheel-knife system - Processable films PE and PO - Year of construction 2005 - Simple shrink tunnel DS-600 with switchable rotating bars - Conveyor belt 1000 x 400mm - SlipTorque roller conveyor 2 ...

Rondo line

: neu : ca. 10 Wochen ab Auftrags : Türkei : 67700 € : 1354 € : 3100 mm : 10 mm : 10 mm : 8 mm : 6 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1460 mm : 1550 mm : 7500 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 52100 € : 1042 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 3750 mm : 1180 mm : 1300 mm : 4000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad wa ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 53700 € : 1074 € : 2550 mm : 8 mm : 8 mm : 6 mm : 220 mm : 220 mm : 160 mm : 1,5-6 m/min : 5.5 kW : 4900 mm : 1100 mm : 1250 mm : 4600 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 31400 € : 634.28 € : 1550 mm : 6 mm : 6 mm : 4 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 3750 mm : 880 mm : 1100 mm : 2400 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 35000 € : 707 € : 2050 mm : 4 mm : 4 mm : 3 mm : 150 mm : 150 mm : 130 mm : 1,5-6 m/min : 4 kW : 4250 mm : 960 mm : 1100 mm : 2800 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was created w ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 111100 € : 2050 mm : 30 mm : 30 mm : 25 mm : 25 mm : 20 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5000 mm : 2000 mm : 1900 mm : 11000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 117800 € : 2550 mm : 25 mm : 25 mm : 20 mm : 20 mm : 16 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 5500 mm : 2000 mm : 1900 mm : 13000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 56100 € : 1122 € : 2050 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 4300 mm : 1425 mm : 1470 mm : 5450 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 127000 € : 3100 mm : 20 mm : 20 mm : 16 mm : 16 mm : 12 mm : 350 mm : 350 mm : 260 mm : 1,5-5 m/min : 22 kW : 6000 mm : 2200 mm : 1900 mm : 15000 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad  ...

: neu : ca. 8 Wochen ab Auftragse : Türkei : 64100 € : 1282 € : 2550 mm : 13 mm : 13 mm : 10 mm : 10 mm : 8 mm : 260 mm : 260 mm : 200 mm : 1,5-6 m/min : 7.5 kW : 4800 mm : 1460 mm : 1550 mm : 6800 kg STANDARD EQUIPMENT fully hydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing hardened rolls 2 working speeds central lubrication system protectionagainst overload moveable control pane user manual in GERMAN and ENGLISH machine and equipment accordingto the CE regulations OPTIONAL EQUIPMENT ground and polished rolls infinitely adustable speed of rolls hydraulic/mechanic adjustable upper and lateral supports aut. material withdrawal changeable upper roll for especially narrow bending radii IMPORTANT ISSUES AT CONICAL B ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 62200 € : 1244 € : 3100 mm : 9 mm : 8 mm : 6 mm : 245 mm : 245 mm : 180 mm : 1,5-6 m/min : 7.5 kW : 5350 mm : 1425 mm : 1470 mm : 6350 kg 4 rolls fullhydraulic drive of upper roll and lower roll hydraulic infeed of lower and side roll digital read-out of lower and side rolls position hardened rolls conical bending device hydraulic load relieving of upper roll hydraulic drop-end bearing 2 working speeds central lubrication system protectionagainst overload moveable control pane according to CE rules OPTIONAL EQUIPMENT: infinitely adustable speed of rolls hydraulic side support hydraulic top support IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity the cone length can be max. 30 % oremust be more than 60 % of roll length hardened rolls are recommended The data for this ad was creat ...

: gebraucht : 2021 : 9485 : Türkei : 2100 € : 1 : 1050 mm : 2 mm : 75 mm : 1930 mm : 700 mm : 1160 mm : 300 kg MINT CONDITION 3 rolls asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cleaning of trays and baking tins in the bakery. -Year of construction 2021 -Voltage: 230 volts -Power 2.5 kW -Temperature 70 C° External dimensions approx. 121x35x90cm Internal dimensions approx.: 102x30x74cm

System: Oscillating cut Cutting thickness max: 12 mm Cutting length max: 3,000 mm Knives: 1 set new, 1 set used Machine weight 14.000 kg Machine dimensions LxWxH: 4.040x2.850x2.450 mm

Rondo Laminazione pastry sheeting line 2001, Stainless, total length 7000mm, this line comprises an infeed section – multi roller satellite head, cross pinner and then calibrator making puff pastry from blocks / billets to final width of 600 mm and 2-3mm thickness, comes complete with electrical drawings and manuals.

Power: 30 cycles / min. Set up to handle the following formats: 6 x 0.5l shrink pack (3 six-packs on tray) 6 x 1,0l shrink pack (2 six-packs on tray) 6 x 1,5l shrink pack

Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin  ...

Seewer Rondo Doge Sheeter Type: SSO 62 Fully automatic sheeting machine Year of construction 2003 digital control Band width: 58cm Tapes as good as new on wheels with locks Height: 120cm Width: 280cm Depth: 120cm

Seewer Rondo Doge Sheeter Type: SSO 62 Fully automatic sheeting machine Year of construction 1999 digital control Band width: 58cm Tapes as good as new on wheels with locks Height: 120cm Width: 330cm Depth: 120cm

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12500 € : 255 € : 1050 mm : 5 mm : 130 mm : 3,5 m/min : 2.2 kW : 2200 mm : 750 mm : 1000 mm : 1200 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 Wochen ab Auftrags : Türkei : 17300 € : 352.92 € : 2050 mm : 4 mm : 140 mm : 2.2 kW : 3200 mm : 750 mm : 1000 mm : 1650 kg 3 reels asymmetrical roller arrangement - with pre-bending 2 driven rollers by means of a brake motor manual Back Roll upper roller can be swiveled forward forward / reverse run conical rounding by inclining the rear rollers movable control panel OPTIONS: hardened Rolls€ 1.800,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 13000 € : 265.2 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.250,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 11000 € : 190 € : 1050 mm : 4 mm : 110 mm : 2.2 kW : 1100 mm : 750 mm : 1000 mm : 990 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.120,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15000 € : 306 € : 1550 mm : 4 mm : 140 mm : 3,5 m/min : 2.2 kW : 2700 mm : 750 mm : 1000 mm : 1420 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7000 € : 144.2 € : 1270 mm : 2.5 mm : 90 mm : 6 m/min : 1.1 kW : 1850 mm : 700 mm : 1200 mm : 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 7200 € : 148.32 € : 1550 mm : 2 mm : 90 mm : 6 m/min : 1.5 kW : 2130 mm : 700 mm : 1200 mm : 545 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH OPTIONS: powered back roll EUR 1.000,- digital readout EUR 1.100,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5300 € : 109.18 € : 1050 mm : 3 mm : 2 mm : 90 mm : 2080 mm : 700 mm : 1250 mm : 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5750 € : 118.45 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll hardened rollers right / left rotation with double foot switch user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 9660 : ca. 10 Wochen ab Auftrags : Türkei : 7800 € : 160.68 € : 1 : 1050 mm : 3 mm : 90 mm : 6 m/min : 1.1 kW : 1630 mm : 700 mm : 1200 mm : 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll hardened rolls tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 3100 € : 1270 mm : 1.2 mm : 68 mm : 1.5 kW : 1610 mm : 700 mm : 1160 mm : 385 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 14000 € : 285.6 € : 1270 mm : 5 mm : 140 mm : 3,5 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1350 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls€ 1.500,- Motorised Back Roll (Power Rear Roll)€ 1.200,- Digital Read-Out€ 1.200,- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Seewer Rondo sheeter Type: SSO 62 Fully automatic sheeting machine with reel / winder with flour sprinkler digital control Band width: 58cm on wheels with locks tested & cleaned Height: 140cm Width: 300cm Depth: 110cm

Seewer Rondo SKO 67 Combi Sheeter Seewer Rondo SKO 68 Sheeter - Seewer Rondo dough sheeter - with 2 bands - right left rotation - mobile on wheels - Machine is functional More information and pictures on request

Metal plaster KD for 98cm sheets - Sheet metal cleaning machine brush machine - suitable for 98cm sheets with 2 edges Margins on the short side - mobile on wheels - 380 volts

Dough sheeter Fritsch Rollfix - used Fritsch Rollfix sheeting machine - with 61cm bandwidth - right left rotation - with manual and foot switch - Band length 116cm each External dimensions approx.: Length: 244cm Width approx.: 80cm Height: 110cm

Projection: 880 mm Wheels: Ø 60 x 160 mm Toproll adjustment: 300 mm Machine LxWxH: 1300 x 700 x 1800 mm Machine weight: 300 kg

Working length: 2050 mm Round bending: 5 mm Bending: 4 mm Top roller: Ø 150 mm Under-roll: Ø 225 mm Equipped with: - Profile iron bending device - Sentences Profielrollen -Operating instructions Motor power: 3 kW Machine LxWxH: 3300 x 1050 x 700 mm Machine weight: 2000 kg

SUNDWIG Rotating Dividing Shear with Chop Shear YOM: 1997 Capacity: 2000mm x 13mm Max. Speed: 36m/min Min/Max Strip width: 700-2030mm; Min/Max Thickness: 2.8-13.2mm (Bulb plate 3.0-10.0mm) Cutting length: 500-16000mm Try-out table length: 500mm Infeed speed 10m/min, Pass line 1000/970mm, Manipulator to change the knives

sheet width: 700 mm plate thickness: 4,0 mm distance between columns: 720 mm diameter of upper rolls: 95 mm total power requirement: 1,1 KW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 0,95 x 0,76 x 1,25 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

only sheets: . amount: 77 Tonnen plate length: 12 m plate width: 2 m Thickness: diverse mm sale: nur komplett only complete position: . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Year 2014 - twin orbital grinding/polishing pads. with extraction & filtration

A used dough sheeter from Fritsch Model Rollfix 3-630 with 60cm bandwidth is currently for sale and immediately available in our warehouse. Dough sheeter Fritsch Rollfix - used Fritsch Rollfix sheeting machine - with 60cm bandwidth - right left rotation - with manual and foot switch - Band length 116cm each External dimensions approx.: Length: 244cm Width approx.: 80cm Height: 110cm