136,818 used machines on RESALE, but how to find them? Machine Search
Engine: 224 cc 4-stroke petrol engine Cutting width: 53 cm Maximum range: Controllable up to 600 meters away Fuel tank: 1 litre Consumption: Approximately 0.7 liters per hour Maximum Inclination: Up to 45 degrees Maximum speed: 3 km/h Cutting height: Adjustable between 3 and 12 cm Control system: Remote control via wireless transmitter, with a range of up to 600 meters Design: Robust and suitable for slopes up to 45 degrees Ease of use: Easy operation and adjustability for optimal mowing results Safety: Incl. emergency braking and obstacle detection for safe use on steep slopes Remote lawn care, without physical presence Auction-ID: A1-40324-112
Used Urschel cutting machine, built entirely in stainless steel, This Urschel cutting machine stands on castors and is built in stainless steel. Product travels from the hopper into the cutting section; whatever has been cut leaves the machine on the other side through the discharge chute. Drive is by electric motor and belts, and the controls sit in their own box on the machine., The type plate is missing, so the year of manufacture and the exact type are not known. Testing with your own product can be arranged., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/urschel-cutting-machine/, Type: Cutting machine, Infeed: Hopper, Drive: Electric motor with belt drive, Controls: Own control box on the machine, Construction: Stainless steel, on castors
This 6-axis CUTLITE PENTA PLUS LM 9030 was manufactured in 2024. It features a powerful 20,000 W RAYCUS fiber laser with an impressive X-axis working range of 9,050 mm and Y-axis working range of 3,050 mm. The machine includes advanced capabilities such as a BEVEL autofocus cutting head and a double pallet system. If you are looking to get high-quality cutting capabilities, consider the CUTLITE PENTA PLUS LM 9030 fiber laser cutting machine. Contact us for further details.
Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50865-334
Mobile oxy-fuel welding and cutting machine with two gas cylinders, pressure reducers, hose package and case with various torches and accessories. Auction-ID: A7-50868-110
Box size 400x245x305mm; 15A/86V - 40A/96V; IP21S; digital display; Auction-ID: A1-50865-335
Date of Manufacture: 08-2021 Serial No.: M150140000 Dimensions: 856 x 648 x 551 mm (34 x 25.5 x 22 inches) Empty Weight: 50 kg (110 lbs) Loaded Water Mass: 180 kg (400 lbs) Maximum Flow Rate: 1.9 L/min (0.5 gal/min) at 27.5 MPa (4,000 psi) Maximum Pressure: 27.5 MPa (4,000 psi) Maximum Water Temperature: 54 °C Maximum inlet pressure: 0.86 MPa (125 psi) Main unit: 100-240 VAC, 50/60 Hz, 2.0 A, 100 W, IP 32 Total power (unit + pump): 1.8 kW at 110 V / 2.3 kW at 220 V Auction-ID: A1-50714-4206
Working parameters: Manual industrial machine for sharpening and grinding cutting tool profiles. Equipment included: vertical grinding wheel with protective housing, adjustable tool holder, work table, manual movement and adjustment via handwheels, coolant/cooling device and metal protective screen. Notes: Robust construction on metal frame. Auction-ID: A1-50714-4312
Year of manufacture 2007, only approx. 56 cuts! Polar 66 E Guillotine / High-speed cutter Year of manufacture: 2007 Counter: only approx. 56,000 cuts "E" version, monitor, Light barriers 2x side tables Spare blade Tools, manuals
CONTROLS PLC SIEMENS SIMATIC MULTI PANEL FEEDSTOCK TUBE external diameter min.: 8 mm external diameter max.: 90 mm Round tube min. 8 mm max. 90 mm Square tube min. 8x8 mm max. 80x80 mm Rectangular tube min. 15x10 mm max. 60x85 mm
Offered for sale is a paper sheeter with multiple unwind stands. Technical specifications: Cut length: 360-1800mm, sheet width: up to 1500mm, roll width: 360-1800mm, processable paper grammage: 40-173g/m², maximum number of parent rolls: 6, maximum roll diameter: 1000mm, maximum roll weight: 430kg plus 70kg for the winding shaft, core inner diameter: 70mm. Equipped with multiple unwind stands, two slitting knives, cross-cutting unit, web guide rollers, handwheels for mechanical adjustment, sheet transport system and delivery table. Inspection possible by arrangement.
- Consisting of approximately: - 10 x complete sets with HSK F63 tool holder, collet and cutter. - 6 x complete sets with ISO 30 tool holder, collet and cutter. - 3 x HSK F63 strain clamping tool holder. - 10 x cylindrical handle cutting tools. - 12 x tapered handle cutting tools. - 10 x tweezers of various sizes. - Blades. - Operating conditions of these items: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-27
- Consisting of approximately: - 18 x complete sets with ISO 30 tool holder, collet and cutting tool. - 2 x ISO 30 tool holder with collet. - 8 x tweezers. - 14 x cutting tools. - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-13
- Consisting of approximately: - 13 x complete sets with ISO 30 tool holder, collet and cutting tool. - 34 x ISO 30 tool holder with collet. - 16 x tweezers. - 3 x clamping nuts for tool holders. - 2 x drilling aggregates with 4 heads, positionable 0°-360°. - 1 x milling aggregate with fixed inclination. - 13 x cutting tools. - 1 x Hydraulic Pump - Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-23
: gebraucht : 1992 : 010190 : prompt, Zwischenverkauf v : 17900 € : 1 : 320 mm : 650 mm : 160 mm : 40 mm : 192 mm : 205 mm : 5 : 5 MK : 16 : 48 - 2500 1/min : 24 : 0.02 - 0.63 mm/U : 0.006 - 0.2 mm/U : 0.25 - 8 mm : 0.2 - 4 : 150 mm : 100 mm : 40 mm : 3 MK : 85 mm : 2,4 / 3 kW : 1582 mm : 715 mm : 1245 mm : 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our fa ...
turning diameter over bed: 297 mm turning diameter over slide rest: 160 mm turning length: 500 mm spindle bore: 36 mm turning speeds: 30 - 3550 U/min spindle nose: Kurzkegel Gr.5 DIN 55022 tailstock quill taper MT: 3 total power requirement: 2,2 kW weight of the machine ca.: 0,7 t dimensions of the machine ca.: 1,511,5 m On customer order - Private machine - Accessories: 3-jaw chuck 4-jaw chuck Collet chuck with lever clamping Multifix A + various holders Operating tool Various turning tools Original documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Includes 1 cabinet with accessories. This lot is part of the final combination 47 (Lots 42 to 46) Auction-ID: A1-50060-44
press pressure: 1000KN, punching surface approximately: 2x L900 x W720 mm, equipped with motor-driven roller conveyor, 1x support infeed table, 1x oil pump generator, motor power: 7.5 KW, 1x Sigmatek ET 243 operator panel, 1x mobile extractor, and personal fencing protection with Sick laser curtain protection. Includes rack filled with leather dies and 2x green plastic plate Auction-ID: A1-50060-9
Incly cabinet with accessories. This lot is part of the final combination 53 (Lots 48 to 52) Auction-ID: A1-50060-50
greates pass round over bed: 320 mm turning dia. over face-slide: 198 mm centre height: 160 mm turning length: 650 mm spindle turning speed range: max. 3.000 U/min spindle passage: 40 mm tailstock quill taper MT: 3 quill stroke: 85 mm total power requirement: 4 kW weight of the machine ca.: 0,68 t dimensions of the machine ca.: 1582 x 715 x 1145 m Well-maintained machine from a vocational school Accessories/Equipment: - CE marking - WEILER 3-axis digital readout - Multifix tool post - 3 Multifix tool holders - KLOPFER 160 mm 3-jaw chuck - KLOPFER 160 mm 4-jaw chuck - Various sets of clamping jaws - Safety drive plate - 34 collets - Collet clamping system - Drill chuck - Live center - Various machine keys/wrenches - Machine mounts/feet - Work light - Chuck guard with electrical cut-off - Coolant pump - Operating manual and circuit diagrams The data for this ad was created with ModulMWS ...
Used ESAB CXL-DX 3500 plasma cutting machine (2016). Table suitable for large format sheets with a usable metal area of 12,000 mm (length) x 2,500 mm (width). Specified cutting capacity: 360 amps. A complete extraction system is included. Key details - Manufacturer: Esab - Model: CXL-DX 3500 - Year of construction: 2016 - Table/work surface: 12,000 x 2,500 mm (metal length x metal width) - 1 x Plasma Specified Cutting Current/Power: 360 Amps -1 x Autogen - Included: complete extraction system
This machine is multi-purpose and can drill/punch/mark and cut plasma. See photo for all diameter heads and cutting thicknesses max. - Maximum plate lengths: 6000x2500mm - Maximum plasma cutting plate thickness: 30mm - Maximum drilling plate thickness: 40mm - Maximum punching plate thickness: 25mm Auction-ID: A3-46137-16100
Year 2004; with two presses; load cells and 4 m stacker, the machine has worked very little; it can process cables from a minimum section of 0.0 to 25 M SQM to a maximum of 2.5 M SQM Auction-ID: A1-50513-131
Arntz Blue Line saw blade Length: 5800 mm Specification: 41 x 1.3 mm 2/3 K Carbide band saw blades with pre-cutting and post-cutting geometry for machining non-ferrous metals and graphite. The specialist for: - Aluminium alloys - Aluminium bronzes - Copper alloys - Sand-cast aluminium and magnesium castings - Graphite
Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...
Key data: 320 mm, 220 mm, 255 mm
Manufacturer: FANUC Model: Robocut Alpha-0iC A04B Year: 2006 Condition: Used Stock No: 9607 Control System: FANUC Series 180iS-WB Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 255 mm Feed length in U-axis (+-): 120 mm Feed length in the V-axis (+-): 120 mm Maximum table load: 500 kg Machine weight: 2000 kg
used bread slicer Treif Diskus SB, overhauled, knife sharpened, weight 225 kg, year of construction 2015, machine no. 609102.190467.124622, 50 Hz, 400 V, 0.9 kW, 2.25 / 10 A, 1.22 HP
Alfra VKS 125 cutting scissors with legs and gutters, various electrics Auction-ID: A1-50476-319
- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-73
Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-38
equipped with Hawa lever hand-held profile cutting device; table top; equipped with length stop; work table mounted on profile steel base; heavy plywood table top; equipped with base cabinet and drawer; including various electrical contents including power plugs; Auction-ID: A1-50476-255
Laser power 3200W Just 400v/50hz. In working order, +-11 500kg weight. This industrial CO₂ laser cutting machine is suitable for precise cutting of steel, stainless steel, and aluminum. The machine has a working range of approximately 3,000 x 1,500 mm and is equipped with a CNC control. Thanks to its closed machine construction and integrated laser system, it is suitable for various applications within the metalworking industry. Technical data: - Brand: TRUMPF - Type: Trumatic L 3030 - Year of construction: 2004 - Laser type: CO₂ - Working range X/Y: approx. 3,000 x 1,500 mm - Z-axis: approx. 115 mm - Laser power: according to type/configuration - CNC control - Suitable for steel, stainless steel and aluminum - Industrial version - Used condition The machine is offered as shown in the photos. Any dismantling, loading and transport are entirely at the expense of the buyer. Auction-I ...
Used ALOUMIL press for cutting and punching aluminium profiles, air-operated (pneumatic drive). Used for cutting and punching aluminium profiles in the manufacture of aluminium windows and doors. Technical characteristics: - Brand: ALOUMIL - Pneumatic (compressed-air) operation Exact model and further technical specifications (capacity, dimensions, weight) are not confirmed for this specific unit - please contact us for details. Checked and ready to work Auction-ID: A7-50988-37
threading machine mounted on mobile base; tube cutting machine mounted on tubular steel base; Auction-ID: A1-50476-67
ROTOZIP RZ5 600 W multi-tool kit (ref. F012RZ05JA) for cutting tiles and other materials. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-57
- Total installed power 5.30 KW. - Length of the piece to be cut from 310 mm to 4100 mm. - One head is fixed and the other mobile with automatic positioning commanded by programmable electronic control. - The 2 heads are tiltable. - Disc diameter 450 mm. - 2.20 KW motor in each head. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of disassembly and loading are those specified as additional costs. Auction-ID: A7-50834-601
Used veneer guillotine shear (veneer cutting machine) CAGLIO (Luigi Caglio, Italy), model TRC 3200, for cutting veneer sheets in a straight line with precision. It has a cutting length of 3200 mm, a hydraulically operated clamping beam that holds the veneer sheet during cutting, and a motorised back gauge (guide) for fast and accurate adjustment. The base, the blade carrier and the table are made of cast iron. Technical data: Maximum cutting length: 3200 mm Cutting height: 100 mm Hydraulic unit pump motor: 7.5 HP Hydraulic pressure, adjustable: 60 - 120 atm Weight: 3800 kg For more information and for the condition of the machine, please contact us. Auction-ID: A7-50988-126
maximum number of results exceeded
please refine your search
1 € 
