134,655 used machines on RESALE, but how to find them? Machine Search
Brotschneidegatter, Fabr. MHS, model BM 45 NU
Durchlauf - Schneidegatter, Fabr. Delta
Brotschneidegatter, Fabr. Rego RMT, Type EMT 10, semi-automatic
Bread slicer, Fabr. Herlitzius
turning diameter: 330 mm turning length: 510 mm control: FANUC 18i - T turning diameter over bed: 600 mm turning diameter over slide: 550 mm x-travel: 250 mm z - travel: 580 mm y-travel: 100 (±50) mm b-axis: 0.001 mm rapid travel x/y/z: 20/7,5/24/ m/min rapid taverse: B- Achse 20 m/min c-axis: 4.500/ 6.000 ° spindle passage: 76/ 45 mm spindle nose: A2#6 spindle turning speed range: 4.500/ 6.00 U/min spindle drive: 15/ 7,5 kW Turret: 12- fach Stationen Chip coveyor: Inkl. chuck: Hauptspindel 210 mm chuck: Subspindel 160 mm total power requirement: 50,7 kVA weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3.118 x 1.705 x 2.076 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Cutting machine HSM type ABW-ROTA-2200 Specifications: • for foils, cork, veneer, etc. • Rotational cross-section • Cutting width max. (mm): 2100 • Heating: included • Cooling: included
cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...
Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!
we sell a Pallmann granulator IPS 50x1000. Year of construction :2001. The machine is fully operational. The regrind discharge is equipped with an extraction chute. Optionally, we can also offer you other system components, e.g. Cyclone, etc. Control cabinet with input load switching is included.
M. No.: 7061504 Format (cm): 78 Equipment / Additional information: Side table, air table, 1x reserve knife
ECKERT JANTAR 2 plasma cutting machine was manufactured in Poland in 2010. The machine with a reliable plasma torch and a large work table with a length of 3000 mm and a width of 1500 mm guarantees its user excellent precision in the machining of thin and thick metal sheets, as well as ensures a high degree of operational safety and long-term failure-free operation. The contamination generated during the process is effectively eliminated by the extraction table, covering the entire working area of the machine. The ECKERT plasma cutting machine is also equipped with a powerful HYPERTHERM HPR130XD plasma source with a power of 130 A and a modern CNC ECS 872 controller. Technical data of the ECKERT JANTAR 2 plasma cutting machine - CNC control: ECS 872 - work table area (L x W): 3000 x 1500 mm - work area (L x W): 3000 x 2000 mm - plasma source: HYPERTHERM HPR130XD - extraction tabl ...
Key data: 3000 mm, 1500 mm, 6000 W
3000 x 1500mm Dynamic Edition
Bandwidth. 500 mm Strip thickness.. 0.3-2.5mm Coil weight. 5,000 kg Velocity. 70 - 120 m/min. Coil I Diameter.. 508 mm Coil A diameter. 1,500 mm
Key data: 2 mm
Bandwidth... 1,550 mm Strip thickness 0.5-3.0 mm Coil weight. 15,000 kg Coil I Diameter 508 mm Coil A Diameter... 1,600 mm Straightening rollers 23 pcs. Execution. 6 high Stainless steel / aluminium
Ref. -No.: 10371 Manufacturer: LVD Year of construction: 2013 Type of control: CNC Control: 31ilb Storage location: Halberstadt Country of origin: Belgien Structural steel: 15 mm stainless steel: 8 mm aluminum: 6 mm Laser source: Co2 - 4KW Edit size: 6000 x 2000 mm changing table: Yes tension: 50 Hz - 400 Volt Serial no.:: 348XX Operating hours: 31280 H Electrical connection: IEC X-Axis: 6200 mm Y-Axis: 2100 mm Max capacity: 4 kN Max. weight: 25055 KG Dan Performance: 75 kW Machine type: 62-21 cutting head: LM2000 NC Focus Process control: LM2500 Capacitive sensor: LM2301 EG8030 Further information: Last maintenance incl. new PC in 04/2023
Key data: 2 mm
Bandwidth 15.00 mm Strip thickness. 0.5 - 2.0 mm Coil weight... 7,000 kg Profiles... 4 pcs. Speed approx. 20 m/min. Straightening rollers 7 pcs. Complete cut-to-length and cut-to-length line with decoiler, insertion table, straightening machine, cross shears, Longitudinal scissors, electric control.
Ref. -No.: 10368 Manufacturer: BYSTRONIC Year of construction: 2011 Type of control: CNC Control: Bystronic ByVision Storage location: Halberstadt - Germany Country of origin: Schweiz Manufacturer: BYSTRONIC Laser medium: CO² Kohlenstoffdioxid wavelength: 10600 Nm Maximum power: 6000 Cw Workspace X: 3048 mm Work area Y: 1524 mm Stroke Z axis: 100 mm Positional deviation Pa: +/- 0.1 mm/m Position spread Ps: +/- 0,05 mm Positioning in axis-parallel X and Y maximum: 120 m / min Positioning simultaneously X/Y maximum: 169 m / min Axis acceleration X/Y maximum: 30 m/s^2 table load capacity: 890 kg table change time: 25 s
Fiber Tube Laser with Automatic Wire Feed FLV-TA-6024 3kW Technical Parameters - Maximum profile height: 240 mm - Maximum profile length: 6000 mm - X- and Y-axis positioning accuracy: ± 0.05 mm/m - Repeatable positioning accuracy of X and Y axis: ±0.03 mm - Maximum Acceleration: 0.0G - Power: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Power supply: ~3x400 V 50 Hz - Protection class: IP54 Depth: - Steel S235: recommended depth 20.0 mm, maximum depth 22.0 mm - Stainless steel: recommended depth 8.0 mm, maximum depth 10.0 mm - Aluminum: recommended depth 6.0 mm, maximum depth 8.0 mm - Brass: recommended depth 5.0 mm, maximum depth 6.0 mm Construction The machine is very stable thanks to the welded construction. High-speed movement of the head with high precision is ensured by Japanese Fuji servo drives. Automatic lubrication system for axle ...
Key data: 250 mm, 400 mm, 210 mm
Inv. Num. : 2399 Type: 254Y/FF3 Producer: HITACHI Created: 2004 Parameters: Max. travel length of the X-axis: 250 mm Max. travel length of the Y-axis: 400 mm Max. travel length of the Z-axis: 210 mm Feed length in the U-axis ( -): -100 mm Feed length in the V-axis ( -): -100 mm Rapid traverse X/Y/Z: 1500 mm/min Max. workpiece dimensions: 600x400x210 mm Max. workpiece weight: 400 kg
Key data: 320 mm, 220 mm, 180 mm
Inv. Num. : 6869 Type: Robocut 0iA Producer: FANUC Created: 2000 Parameters: Control system: FANUC Max. travel length of the X-axis: 320 mm Max. travel length of the Y-axis: 220 mm Max. travel length of the Z-axis: 180 mm Feed length in the U-axis ( -): 120 mm Feed length in the V-axis ( -): 120 mm Machine weight: 1200 kg
- Program - Chromed air table - Air side table left / right - KNORR RLE-3-K jogger - Spare knife
Offer via gebr. overhauled pipe cutting and chamfering machine Fabr. Georg Fischer / Orbitalum Type RA8 Year of construction 2007 Specifications: Tube Outer Diameter 124-230mm (4" - 8") Wall thickness 1 - 10 mm Power supply 200 - 240 V / 50 Hz infinitely variable speed 150 - 270 rpm. Electronic speed levels 1 - 6 Power 1600 W incl. mounting plate, assembly table used, in good condition.
Mazak machining center mod. FH 480 Year 1995 X = 560 Y = 560 Z = 510 Cutting speed 32,000 mm./min 12,000 rpm CNC Mazatrol M Plus
6000w TruDisc 3000 x 1500mm Big specification
4000 x 2000mm 10KW Fiber laser / 10,000w Fiber laser
welding current: 20 - 60 A cutting capacity: 1 - 20 mm open-circuit voltage: 104 V Required air-pressure: min. 4 bar connected load: 7,9 kW connected load frequency: 400 V weight: 16 kg Dimensions (LxWxH): 480 x 260 x 360 mm Digital display. Surge protection. Plasma torch. Earth cable. Reducing valve with moisture separator. Equipped with IGBT technology Delivered without CEE plug. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rondo Doge Cutting Table Year of construction 2002 63cm bandwidth completely stainless steel with calibration head attached Cutting frame with protective grille with bracket for 2 rollers with attached filler#ät with 2 Tichter with adjustable guillotine Speed adjustable Band height 90cm
WaterJet KIMLA STREAMCUT 3116 build in 2017 in Poland, uses innovative waterjet cutting technology for machining among others steel, plastics and glass. Workpieces with a maximum thickness of 200 mm are cut on an easily accessible working area by the 3D head, programmed in the intuitive KIMLA software with many useful functions. The use of state-of-the-art technology combined with reliable components and a sturdy design guarantee the achievement of clean and precise edges along the entire length of the workpiece, regardless the type of machined material. During its use, the KIMLA 3116 water cutting machine was used to cut rubber using only water and underwent regular maintenance. The total weight of the machine is 2500 kg. Technical specifications of the KIMLA STREAMCUT 3116 water cutting machine - machinable materials: steel, stone, glass, plastics, tiles, etc. - work area dime ...
ECKERT JANTAR 2 plasma cutting machine was built in Poland in 2008. The 14 metre long and 4 metre wide stable frame of the machine allows for efficient cutting of large-size details while maintaining excellent precision and quality of processing. In order to ensure a high level of comfort and safety, the work table is equipped with ventilation and an extraction system for exhaust fumes into tanks and feed bags, which effectively eliminates the dust generated during cutting. The JANTAR 2 plasma cutting machine can be expanded with other elements, such as devices for cutting and processing steel pipes or welding thin metal sheets using the piezoelectric method, giving the possibility of adapting the machine to the individual needs of a production facility. In addition, the machine comes with extensive equipment, including an easy-to-use ECKERT CNC controller and FastCAM software with a ...
Key data: 2 mm
Strip width 1,500 mm, strip thickness 0.5-2.0 mm, number of straightening rollers 6 pcs., feed rollers 2 pcs., coil weight 3,000/ 5.000 kg., longitudinal shears 4 cutting heads manually adjustable, min. width 100 mm electric control new, Hasp can be used as both an unwinding and rewinding reel. Appendix cpl. Outdated, i.e. new.
Key data: 3000 W, 1500 , 6000
New fiber lasers of the HLB series - Optimised equipment with an eye on the essentials – low acquisition costs despite high-quality components. 6kW resonator, Raycus cutting head guarantee high-quality, competitive laser cutting with minimal maintenance costs EQUIPMENT: Cutting Head: Raycus - Auto Focus MAX Photonics Resonator 6KW (12kW optional) Automatic changeover table incl. light barriers Suction Welldone CE certified CypcutControl Sheet format 3,000mm x 1500mm (4,000 x 2,000 optional) Max sheet thicknesses at 6KW FE 20m VA 15mm ALU 10mm CU 6mm Connected load max. 30kW Footprint approx. 9,000mm x 3,000mm x 2,200mm The machine is included 24 Months Warranty Commissioning Delivery within Germany and Software/operator training offered Gases, electricity, and you're done. In our showroom we have various laser machines from our manufacturers ...
Automatic Thread Processing Machine Multitapper 1212 CoastOne - Made in Finland Exhibition machine Machining area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2x tapping forming; 1x Sinking Drilling Station Micro-lubrication for each spindle / tool station Control: TC15 touch screen Numerical Input, Import of Punches - NC Files
Manufacturer: TRUMPF Type L 2525 Year of construction 2007 Working area 2,500 x 1,250 x 115 mm Siemens Sinumerik 840D control system Laser power 3,200 watts Accuracy +/- 0.1 mm Equipment: Rotolas Enclosed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Siemens control system: open PC-based control, easy operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin DIAS Height Control AutoLas Plus automatic focus position adjustment Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, viewing by appointment. Errors in the technical data a ...
Lista Drawer Cabinet with Milling Tool Lista Drawer Cabinet Number of drawers: 13 Pull-out type: Full extension Very high load-bearing capacity due to precise and stable construction made of high-quality, welded sheet steel Body colour: Reseda green, RAL 6011 Load capacity per drawer: 200 kg External dimensions W x D x H: 870 x 725 x 1450 mm Content: Metal Circular Saw Blades Cross-toothed and coupled disc milling cutters Cross-toothed disc milling cutter Angle semi-circular cutter Dovetail cutter Semi-circular milling cutter Thread milling cutters More items - new and used - can be found in our shop! International shipping costs on request!
used
Table size 6500x2000 mm Fiber power 6000 W Maintaned
maximum number of results exceeded
please refine your search
