135,344 used machines on RESALE, but how to find them? Machine Search
Stroke: 15 mm pressure: 3 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 1650 mm plate thickness: 4 mm straightening roll diameter: 45 mm support rollers: 140 Stk : 17 Stk : Sheet width: 1,650 mm Sheet thickness: 4 mm Leveling roller diameter: 45 mm Number of backup rollers: 140 Number of leveling rollers: 17 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
plate width: 2000 mm sheet thickness - max.: 10 mm sheet thickness - min.: 3 mm number of straightening: 13 Rollers straightening roll diameter: 145 mm straightening feed: 16 m/min bale length: 2330 mm distance b/n rollers centers: 150 mm diameter of bottom rollers: 290 mm main drive motor: 30 kW weight: 32 t Sheet width: 2,000 mm Max. sheet thickness: 10 mm Min. sheet thickness: 3 mm Number of leveling rollers: 13 Leveling roller diameter: 145 mm Leveling speed: 16 m/min Roller face length: 2,330 mm Center distance between leveling rollers: 150 mm Backup roller diameter: 290 mm Main drive motor: 30 kW Machine weight: 32 t Additional Information Number of backup rollers: 21 / 24 Number of support rows (upper / lower): 3 / 3 Traverse lifting speed: 0.71 mm/s Traverse adjustment range: –18 mm to +42 mm Max. lower traverse tilt: 8 mm The data for this ad was created with ModulMWS - the ...
plate width: 2500 mm sheet thickness - max.: 32 mm sheet thickness - max.: 39 mm sheet thickness - min.: 8 mm bale length: 2700 mm number of straightening: 7 Rollers number driven straightening rollers: 5 Stk straightening roll diameter: 290 mm diameter of input / output straightening rollers: 345 mm number of support rollers: 13 Stk diameter of support rollers: 288 mm stroke of upper beam: 120 mm straightening feed: 16 m/min rated power of main drive: 90 kW : 138 kw weight: 79 t Sheet width: 2,500 mm Max. sheet thickness (St 50): 32 mm Max. sheet thickness (St 34): 39 mm Min. sheet thickness (St 50): 8 mm Roller face length: 2,700 mm Number of leveling rollers: 7 Number of driven leveling rollers: 5 Leveling roller diameter: 290 mm Outlet leveling roller diameter: 345 mm Number of backup rollers: 13 Backup roller diameter: 288 mm Upper beam stroke: 120 mm Leveling speed: 16 m/min Main d ...
x-travel: 2000 mm y-travel: 500 mm z-travel: 500 mm Control: Siemens 840 D feeds - fine adjustment: 1-8000 mm/min table-size: 2120 x 500 mm table load capacity: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle turning speed - stepless: 0-15000 U/min spindle motor: 20 kW spindle bearing diameter: 70 mm tool diameter: 63 /126 mm tool magazin:: 40 Stk weight: 12 t total power requirement: 65 kVA weight of the machine ca.: t dimensions of the machine ca.: m X-axis travel: 2,000 mm Y-axis travel: 500 mm Z-axis travel: 500 mm Control system: Siemens 840 D Feed rate (fine adjustment): 1 – 8,000 mm/min Table size: 2,120 × 500 mm Table load capacity: 2,000 kg Rapid traverse (X-axis): 40 m/min Rapid traverse (Z-axis): 20 m/min Tool holder: HSK-A63 Spindle speed range (infinitely variable): 0 – 15,000 rpm Spindle drive: 20 kW Spindle bearing ...
material width: 250 mm material thickness: 2 mm diameter: 1200 mm total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 10 mm pre-bending: 8 mm upper roll diameter: 270 mm lower roll diameter: 250 mm side roll diameter: 210 mm total power requirement: 11 kW weight of the machine ca.: 7750 kg Overall size: 5600x1450x1600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1250 mm plate thickness: 15 mm number of rolls: 21 Stück roll diameter: 80 mm band speed: 12 m/min straightening cross-section: 5700 mm² Control: total power requirement: 60 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 40 mm pre-bending: 30 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 22 kW machine weight ab.: 17200 kg Overall size: 5060 x 2200 x 2180 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 160 mm lower roll diameter: 140 mm side roll diameter: 120 mm total power requirement: 2,2 kW Overall size: 4140x1040x1140 mm weight of the machine ca.: 2.350 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4100 mm plate thickness: 35 mm pre-bending: 28 mm upper roll diameter: 540 mm lower roll diameter: 541 mm side roll diameter: 440 mm total power requirement: 37 kW weight of the machine ca.: 48.100 kg Machine dimensions approx.: 7670x3000x2930 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 16 mm pre-bending: 13 mm upper roll diameter: 330 mm lower roll diameter: 300 mm side roll diameter: 240 mm Control: total power requirement: 11 kW Overall size: 5600x1650x1900 mm weight of the machine ca.: 10.600 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 6 mm pre-bending: 4 mm upper roll diameter: 210 mm lower roll diameter: 190 mm side roll diameter: 170 mm total power requirement: 7,5 kW Overall size: 5200x1400x1300 mm machine weight ab.: 5.400 kg Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2100 mm plate thickness: 8 mm pre-bending: 6 mm upper roll diameter: 190 mm lower roll diameter: 170 mm side roll diameter: 150 mm total power requirement: 3 kW weight of the machine ca.: 3.450 kg Machine dimensions approx.: 4040x1380x1255 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 25 mm pre-bending: 20 mm upper roll diameter: 390 mm lower roll diameter: 360 mm side roll diameter: 300 mm total power requirement: 18,5 kW weight of the machine ca.: 17.100 kg Machine dimensions approx.: 5800x2100x2000 mm Accessories / equipment: - Conical bending device - induction hardened rolls - digital display for side rollers - Machine made of steel construction - Separate control panel - two speeds - all rollers on ball bearings - Folding and support bearing from the top roller is actuated from the control panel. When the folding bearing is opened, the roller moves automatically upwards. - Conical adjustment of the rollers via control panel - Central rollers are via hydraulic motor and rotary reduction gear driven. (Top and bottom rollers) - Calibration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...
sheet width: 1050 mm plate thickness: 1,8 mm pre-bending: 1,5 upper roll diameter: 70 mm min. dia.: 105 mm total power requirement: 1,1 kW weight of the machine ca.: 320 kg dimensions of the machine ca.: 1700x700x1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 1550 mm : 2,0 mm : 1,5 mm roll diameter: oben 90 mm : 560 kg : 2580 x 700 x 1250 mm mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
working width: 1000 mm workpiece width - max.: 0,5 - 50 mm sandingbelt width: -- mm weight of the machine ca.: 2,5 t With the SBM-L 1000 G1S2, which works in the dry process, in alternating operation Steel, stainless steel and aluminum can be machined. She deburrs and rounds the edges on the outer and inner contours of punched, laser, fine plasma or water jet cut workpieces with a thickness of up to 50 mm on both sides in just one operation. Two sanding units, 1 each on the top and bottom, remove spatter and slight burrs on outside and inside edges of sheet metal. A total of four sanding belts, 2 each on the top and bottom Underside, process the sheets on both sides at the same time. here All edges are softened or rounded, depending on the tool settings. Machining on both sides saves time-consuming turning of the workpieces and edit twice. All pairs of aggregates can be switched on/o ...
diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...
diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit ...
material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 13760 € : 264.19 € : 0.4 - 2 mm : 400 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2018 : 070033 : prompt, Zwischenverkauf v : Türkei : 20310 € : 389.95 € : 1 : 0.6 - 4 mm : 300 mm : 900 mm² : 80 mm : 10 Nm : 2.62 kW : 1000 mm : 800 mm : 1400 mm : 330 kg DEMO MACHINE helical gear box Wattdrive pneumatic equipment Festo control SCHNEIDER with touchscreen 2 driven rolls remote service module hand wheel Euchner operating manual in German with EC conformity declaration The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 8 Wochen ab Auftragse : Türkei : 29460 € : 562.69 € : 0.4 - 4 mm : 100 mm : 400 mm² : 80 mm : 75 m/min : 10 m/s² : 10 Nm helical gear boxWATTDRIVE (Made in Austria) FESTO pneumatic equipment servo drive and control SIEMENS 7", colour touchscreen SIEMENS 2 driven rolls OPTIONAL EQUIPMENT Handrwheel and Simlinx remote control € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12630 € : 242.5 € : 0.4 - 2 mm : 200 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: neu : ca. 12 Wochen ab Auftrags : Türkei : 12950 € : 248.64 € : 0.4 - 2 mm : 300 mm : 300 mm² : 63 mm : 150 m/min : 10 m/s² FESTO pneumatic system SIEMENS servo drive and control system 7’ colour touch screen SIEMENS 2 feed rollers Option: Handwheel and Simlinx remote maintenance module € 4.290,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
throat: 1100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used dough sheeter Fritsch 600 with digital control and automatic reel from 2008 for sale and immediately available in our warehouse in Bielefeld. -Stainless steel dough sheeter Fritsch Rollfix -with reel -with touch display -60 or 65cm belt width -Year of construction : 2009
Set including 4 Euro pallets of flat cartons and stacked cardboard sheets. The boxes are packed in strapped piles on wooden pallets and come in various formats. This set can be suitable for packaging, packaging, product protection, logistics, moving or recycling activities. The lot is sold in one set according to the photos. Content included according to photos. Auction-ID: A1-48554-300
Manufacturer: Kemmerich Model: VD 3000 UF-SH-520-S Type of Machine: Double Decoiling Reel / Uncoiler Year of Manufacture: 1999 Technical Specifications: - Band width: 100 to 520 mm - Band thickness: 0.5 to 2.5 mm - Maximum coil weight: 3,000 kg - Spreading range diameter: 470 to 520 mm - Maximum coil outer diameter: 1,600 mm - Maximum band speed: 25 metres per minute - Reel crown rotation speed: 1 to 15 rpm - Drive power: 2.6 kW - Connection voltage: 480 V AC, 60 Hz - Rated current: 16 A - Control voltage: 24 V DC - Cross shaft height: approximately 1,250 mm - Maximum load capacity per nameplate: 3,000 kg Find more here - .ucymachines/ Contact us at - sales@ucymachines
x-travel: 1200 mm y-travel: 600 mm z-travel: 600 mm Control: Heidenhain iTNC 530 spindle speed:: 6000 1/min. spindle taper: CAT-50 ISO spindle drive: (S1) 10 kW table surface area: 1300 x 600 mm table load: 1200 kg feed speeds: 1-10000 mm/min rapid travel x/y/z: 20/20/15 m/min distance table - lower edge spindle: 125-725 mm total power requirement: 25 kVA weight of the machine ca.: 7,5 t dimensions of machine: 3600 x 2300 x 3000 mm Equipped with: CNC control Heidenhain iTNC 530 Electr. portable handwheel Spindle oil cooler Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg Preparation for hydraulic machine vice Preparation for 3-D measuring probes Chip conveyor Coolant system, coolant through spindle 20 bar Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h ...
Profile cassettes and cutting dies for a roll forming line used in the production of trapezoidal sheet profiles. Two different profiles can be produced: H = 158 mm × W = 750 mm H = 153 mm × W = 840 mm Please refer to the photos for further details. Material Capacity Aluminum and steel Material thickness: 0.75 - 1.5 mm Scope of Supply Cassette 1 for Profile 153 and 158 Cassette 2 for Profile 153 and 158 Cassette 3 for Profile 153 and 158 Cassette 4 for Profile 153 Cassette 4 for Profile 158 Cassette 5 for Profile 153 Cassette 5 for Profile 158 Cassette 6 for Profile 153 Cassette 6 for Profile 158 Cutting die for Profile 153 Cutting die for Profile 158 All tooling comes from ongoing production and is being offered for sale due to a product change within the manufacturing operation. Please note: The offer includes the profile cassettes and cutting dies onl ...
work piece width: max 145 x 150 mm band speed: 1.0 - 8.0 m/min workpiece height: max. 100 mm total power requirement: ca. 5.5 kW weight of the machine ca.: 900 kg. dimensions of the machine ca.: 1560 x 870 x 1920 mm Wide-Band Sander for Deburring and Rounding of Laser-Cut Parts - Includes Vacuum Work Table Description Technical Specifications: - Working width: 150 mm - Maximum workpiece height: 100 mm - Max. height adjustment: 100 mm - Complete finishing in a single pass - 1 grinding wheel - 2 disc brushes - Pressure rollers in front of and behind each unit - Adjustable feed speed - Fixed table, constant feed height - Vacuum table - Pressure of the brushes and grinding wheels adjustable . without opening the hood INCLUDED: DD UNIT: GRINDING WHEEL FOR DEBURRING - Working width: 150 mm - Motor power: 1.1 kW - Grinding wheel diameter: 250 mm INCLUDED: 2PTB UNIT: DISC BRUSHES FOR EDG ...
: neu : ca. 12 - 14 Wochen ab Auf : Italien : 74000 € : 1398.6 € : 1350 mm : 0,5 - 170 mm : 1370 x 2200 mm : 4000 m³/h : 200 mm : 6 bar : 78 (+/-2) dB : 1750 mm : 2100 mm : 2180 mm : 2000 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Bonnets for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable ...
: neu : ca. 12 Wochen ab Auftrags : Italien : 153200 € : 2895.48 € : 1350 mm : 0,4 - 120 mm : 1370 x 2200 mm : 6000 m³/h : 150 mm : 6 bar : 4200 mm : 2300 mm : 2350 mm : 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for: Automatic star-delta connection of the main motors Digital display for sheet thickness with decimal point tolerance Material thickness adjustment (+/- 0.1 mm) Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request The table raises and lowers from 780 mm to a maximu ...
Diosgyörer, OLG12-3050, Hydraulic, up to 12mm, Cutting length: 3050, Weight: 15to, L-350, W-220, H-240cm
Height=1.75 m, Overall length= 1.55 m, Overall width= 1.45 m, Working width: 650 mm Power supply: 3 × 400 V / N + PE Frequency: 50 Hz Total power: 1.8 kW Total current: 11 A Machine number: 02016-29122 condition: refurbished In store Made in Germany Description Refurbished Fritsch Rollfix 70/650 E NU programmable dough sheeter suitable for bakeries and pastry production The machine is equipped with an electronic control panel with stored production programs a flour duster and conveyor belts on both sides Year of manufacture: 2002 Programmable electronic control Flour duster Stainless-steel construction Refurbished and tested
Key data: 2000 mm, 8 mm, 6 mm
PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 2000 X 8 MM MODEL 2020B4 year 2020 capacity 2000x8 mm Plate roll hydraulic linear guideways Machine in excellent working condition Bending capacity -Plate width : 2000 mm -Rolling plate thickness 8 mm - Prebend thickness 6 mm Rolls dimensions: -Useful length 2050 mm -Upper roll 200 mm -Lower roll 180 mm -Side rolls 160 mm Electric motor 5,5Kw Vac 400/50 • Hardening of the 4 rolls high strength surface • Central rolls driven with hydraulic motors and gear units • Conical bending attachment side rolls tiltable to form cones • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centr ...
including all electrical cabinets for controlling the liftmaster; Auction-ID: A1-49836-16
material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...
Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,
New Trapezoidal Steel Sheet T-35 – RAL 9006 Trapezoidal steel sheet T-35 for roofing and wall cladding applications, made of coated steel. Specification: Profile: T-35 Length: 6,500 mm Thickness: 0.5 mm Color: RAL 9006 (white aluminium) Coating: protective + anti-condensation (felt) Anti-Condensation Layer: absorbs moisture prevents water dripping reduces corrosion risk protects structure and stored materials Packaging & Delivery: Sheets secured for transport. Auction-ID: A1-49902-53
Object Extensive stock of plastic sheets for mold making. The stock includes sheets in different formats, thicknesses and colors, as well as various cuts. Contents - Plastic sheets in different sizes and thicknesses - Different panel colours and material finishes - Large panels as well as narrower blanks - Partially already cut panels Auction-ID: A1-50026-94
Object Extensive stock of plastic sheets and plastic blocks for mold making, model making and the production of molds and models. The stock includes different plates, blocks and already processed mold elements on several pallets. Contents - NECURON model and tool plates, including NECURON 730 and NECURON 800 - Plastic blocks and sheets in different dimensions - Partly already cut or processed form elements - Different colours and material finishes Auction-ID: A1-50026-93
Machine number 139/6238/11
Product Name: TATA Steel (SAB Profile) 18/988 Product Type: Corrugated Sheet / Wall Plate Quantity: 75 pieces Size per plate: 4000 mm Total overview: 4000 mm x 75 pieces Thickness: 0.75 mm Working thing width: 988 mm Profile height: 18 mm Color: White Coating: Residual coils (Polyester / Colorcoat) Fire behaviour: A1 Material: Structural Steel Total weight: 2,200 kg Auction-ID: A1-41961-68
Product Name: TATA Steel SAB 35/1035 Product Type: Roofing Sheet/Wall Plate Size per plate: approx. 6500 mm Total overview: 6500 mm x 40 pieces Thickness: 0.70 mm Operating width: 1035 mm Profile height: 35 mm Color: Red Fire behaviour: A1 Material: Structural Steel Total weight: approx. 2300 KG Auction-ID: A1-41961-81
maximum number of results exceeded
please refine your search
50 € 
