sheet bending used for sale

Bending tool, bending tool, die, upper blade, upper tool, straightening tool -Bending tool: Length 1760 mm -Tool angle: 83° -Dimensions: see drawing in the photos -Dimensions: 1760/28/H144 mm -Weight: 44.6 kg

Key data: 642 t

CNC Press Brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of construction: 2018 CNC control: CYBELEC ModEva 15 Pressure: 6,300 kN Working width approx. 6,200 mm DSP-Laser-TX Connected load: 400 V / 95 kVA

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 3-piece -Total length: 143 mm / 1 x 28/45/70 mm each -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 160 mm -Width/Height: 30 mm -Dimensions: see drawing in the photos -Weight: 0.7 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake, 7-piece set -Total length: 1053 mm / each 1x 238/58/390/100/270 mm / 2x 75 mm -Width/Height: 97 mm -Weight: 75 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Total length: 285 mm -Width/Height: 100/120 mm -Dimensions: see drawing in the photos -Weight: 23.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Length: 250 mm -Width/Height: 65/155 mm -Dimensions: see drawing in the photos -Weight: 7.7 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 682 mm / 1x 505/177 mm each -Transport dimensions: 682/143/H28 mm -Total weight: 13 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Dimensions: see drawing in the photos -Length: 490 mm -Dimensions: 490/144/H30 mm -Weight: 10.8 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Type: PBS-H-SM-09 R=1 88° -Dimensions: see drawing in the photos -Total length: 2505 mm / 835/27/H170 mm each -Transport dimensions: 835/170/H81 mm -Total weight: 48.4 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H60 mm -Total weight: 30.8 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 2-piece -Dimensions: see drawing in the photos -Total length: 1500 mm / 1x 1000/500 mm each -Transport dimensions: 1000/143/H62 mm -Total weight: 31.5 kg

Max tube diameter 76 mm Max thickness 3 mm Max bending degree 180 Bending radius max 260 mm

SECOND HAND BENDING PRESS - plates dimensions mm. 3100X800 - opening mm. 800 - 8 cyl. diam. 80 mm.

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1140 kg

Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Drive: hydraulic -Power: 4 kW -Bending angle: for left/right to adjust the angle -Equipment: adjustable counter-support strips, standard bending tool -Dimensions: 930/1640/H890 mm -Weight: 1200 kg

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Inv. Num. : 3168 Type: SE 80.3 Producer: RASI Created: 2003 Parameters: Minimum tube diameter: 4 mm Maximum tube diameter: 82 x 2.6 mm Minimum bending radius: 34 mm Maximum bending radius: 228 mm Maximum bending angle: 195 h Total power requirement: 11 kW Maximum bending length: 3-6 m Maximum resistance torque: 12.7 cm³ Operating voltage: 400 V Control voltage: 24 V Feed speed: 0-60 m/min Machine height: 1200 mm Machine length: 7000 mm Machine width: 1300 mm Equipment: Bending tools

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg

- Round tube steel DM 6 – 42 x 5 mm - Round tube stainless steel DM 6 – 42 x 3 mm - Pipe push-on length max. 6,000 mm - Programmable logic controller up to 20 angles - Digital display of longitudinal displacement - Digital display of torsion - Programmable, anticipatory mandrel retraction - Mandrel lubrication system by hand pump - Wrinkle smoother receptacle - Bending speed max. 13°/sec - Bending angle up to 180° + 10° deflection - Manual feed - Manual twisting - Right bending direction - Radii from 1.5 D - Incl. bending tool : - DM 12 mm - radius 36 mm ) / DM 15 mm - radius 37.5 mm - DM 18 mm - radius 36 mm - DM 22 mm, radius 44 mm with mandrel - DM 42 mm, radius 44 mm with mandrel

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 13.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 8.5 mm -Dimensions: 50 x 180 mm -Recording: 15 x 17 mm -Length: 3250 mm -Weight: 140 kg

Bending tool, die, upper blade, upper tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Tool radius: 5 mm -Dimensions: 45 x 220 mm -Length: 2400 mm -Weight: 120 kg

Bending tool, die, upper blade, top tool, deer foot tool, deer foot tool for press brake -Tool: for press brake -Dimensions: 20 x 160 mm -Recording: 35 x 31 mm -Length: 2680 mm -Weight: 110 kg

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

CNC – controlled profile and tube bending machine for demanding and precise bending work with hollow sections and tubes. With our machines, aluminium – steel / stainless steel – various plastics such as PVC window profiles (depending on the application) can be bent with repeatable accuracy, regardless of the material. Depending on the equipment, our machines can also be used for three-dimensional bending work. Our REPANDUS models can work both horizontally and vertically. The models of the REPANDUS series work with a fixed upper roller and two movable lower rollers – this means that the straight end piece is relatively short compared to machine concepts with fixed lower rollers. The machine body is made of vibration-absorbing cast steel Shaft diameter of upper and lower rollers Ø 70 mm Shafts made of special steel – hardened and ground Bending force 190 kN Maximu ...

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 7.5 mm -Dimensions: 45 x 190 mm -Length: 2800 mm -Weight: 240 kg

Offer 24126 Specifications: - Bending process mot. with automatic or manual operation - Bending capacity square bar ST 37 up to approx. 30 mm - Bending capacity flat bar ST 37 up to approx. 30 x 8 mm - Bending length between the twisting units adjustable up to approx. 1200 mm - Min. twist length 10 x material thickness ( long side ) - Bending time preselection / bending length twist preselection - Right – counterclockwise -Tailstock - Elbow + ring bending device GRB 66 with various roller sets - Bending performance - flat steel 60x10 mm high, R 700 mm - Flat steel 70x12 mm flat R 500 mm - Round tube 1 1/2" x 2 R 800 mm - Square tube 40x40x3 R 1500 mm - Angle 45x6 R 600 mm - Round tube roll sets steel 1 1/4" , plastic 1 1/2" - Standard roller set - Space requirement approx. W 1850 x H 1300 x D 700 mm - Drive 400 V / 2.2 kW ...

Specifications: - Max. working length 4050 mm - Column passage 3050 mm - Max. pressing force 110 t - Plunger stroke 200 mm - Projection 350 mm - Table height 900 mm - Opening width 400 mm - Drive power 17.5 kW - Space requirement approx. W 4250 x H 2850 x D 2200 mm - Weight approx. 15.0 t -with: - Control CYBELEC ModEva 10 S renewed in 2011 - Y 1+ 2 , X , Z - Two-hand control panel: -Mot. Back gauge 5 - 1000 mm - Front support arms - Split sharpening tool, - Universal die

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool radius: 10 mm -Dimensions: 45 x 190 mm -Length: 3000 mm -Weight: 240 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Groove: 32 mm wide -Square: 95 x 35 mm -Length: 3500 mm -Weight: 70 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 30 x 90 mm -Tool total length: 2500 mm -Rail length: 2500 mm -Weight: 95 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: not shared -Tool dimensions: 30 x 90 mm -Tool total length: 2000 mm -Rail length: 2500 mm -Weight: 83 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 10 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg

Key data: 220 t, 4000 mm

with CNC-controlled crowning LazerSafe Safety system Foot pedal with standard tool set Machine in little-used condition Colour: turquoise/grey Total power requirement:f 15 kW Projection: 400 mm Stand width: 3150 mm Drive power: 400 V Back gauge: 625 mm Flow speed: 130 mm/sec Working speed: 8 mm/sec Retraction speed: 85 mm/sec Stroke length min./max:. 260 mm R-axis 150 mm Dimensions: 5100 x 1920 x 3080 mm Weight: 12250 kg Machine Number:M00000948 LZ: approx. 8 - 10 weeks, machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out.

plate length: 1550 mm plate thickness: 3,5 mm number of rolls: 3 roll diameter: 120 mm total power requirement: 2,2 kW weight of the machine ca.: 750 Kg dimensions of the machine ca.: 2,2 x 1,5 x 1,6 m Electrically operated round roller via foot lever, Sturdy, welded construction stand, Rear roller adjustable for conical bending, Rollers are hardened, Top roller can be swivelled to remove the workpiece. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

chamfer lenght: 1530 mm plate thickness: mm distance between columns: 1530 mm pressure: 40 t stroke length max.: 300 mm travel -x axis: 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 200 t

Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...

Ref.nr. 00918 Description d He Plant CNC Bending Machine for fully automatic wire and forming machining. The machine was commissioned in March 2019 and is designed for the cost-effective series production of complex bent wire parts. By combining different machining steps in one system, the SpeedMax series enables extremely efficient production with high precision and repeatability. Manufacturer: SCHMALE Maschinenbau GmbH Model SpeedMax L-20-1-03 Year of construction 2019 Technical data: Commissioning: 03/2019 Total system unit counter: 12,423,581 parts (as of 02/2026) Application: Wire bending and forming Fully automatic CNC-controlled production system Special features: Designed for high volumes and series production High production speed and process reliability Condition Under power can be demonstrated Submission date Immediately by arrangement

pressure: 20 t stroke: 200 mm table-size: 550 x 550 mm working speed:: 10 mm/ sec. work height max.: 940 mm toolpiece height max.: 200 mm total power requirement: 2,2 kW : 200 x 10 mm weight: 650 kg dimensions: 1,1 x 0,6 x 1,22 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.

Manufacturer: AMADA Year of Manufacture: 2001 Model: HFE 80-25 L Type of Machine: Bending Machine Maximum Tonnage: 800 kN Maximum Stroke: 350 mm Weight: 6100 kg Installed Power: 9 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines

Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992

HEBÖ SSB-3 scroll bending machine was manufactured in 2015 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ SSB-3 is a professional bending machine for the production of decorative elements used in artistic blacksmithing. The machine is designed to bend steel rods and flat bars, enabling the creation of spirals, arches and other decorative elements. Machining is performed by means of interchangeable work heads, which gradually shape the material, ensuring high accuracy and repeatability of the finished parts. Continuous speed adjustment within the range of 1 to 50 rpm enables precise adjustment of operating parameters to the type of workpiece being machined. The machine also features a large work table, an integrated tool cabinet  ...

used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Jaws from diameter: 12 to 26 mm Auction-ID: A7-49089-427

PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment

This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details.

ZENITH MACHINES HRBM 65 3-roll bending machine was built in 2020 in China. The machine is designed for the precision bending of steel tubes and profiles into arcs, circles and spirals with a constant radius. The bending process is performed using three driven rollers rotating at a maximum speed of 9,3 rpm. The hydraulic pressure enables precise positioning of the upper roller. Side positioning shafts stabilise the workpiece during operation, increasing process stability, bending precision and the range of operations that can be performed. Thanks to its robust design and reliable components, the ZENITH MACHINES HRBM 65 is an excellent addition to professional production plants and workshops. The total weight of the bending machine is 720 kg. It is possible to purchase 4 ROLOTOK roller conveyors, each 3 m long with a roller width of 600 mm, at an additional cost. The price of one convey ...