sheet bending used for sale

Bending tool, die, bottom knife, bottom tool, prism tool, beading tool -Tool: for press brake -Prism width: 16 mm -Tool: shared -Tool: is guided -Tool intermediate dimensions: 1430 mm -Transport dimensions: 1550/200/H235 mm -Weight: 250kg

Folding bench TEKO Sheet thickness 1.9 mm Usable length 2025 mm Length 2500 mm Width 650 mm Height 1080 mm Weight 500 kg

Bending tool, die, upper blade, upper tool -Tool: for press brake, 4-piece set -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see drawing in the photos -Total length: 1977 mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimensions: 1015/200/H55 mm -Weight: 42.6 kg

mandrel bending machine Tansfluid DB 628 Year of construction: year 1995 Drive power Drive power 1.5 kW Drive drive hydraulic cylinder & roller chain Pipe range bending type 4-28 mm Bending angle bending angle 190° (without tube) Bending radius bending radius 1.5 x D – 2.0 x D Nominal pressure nominal pressure 250 bar Operating pressure 3095 mm n. right. Flow rate delivery rate 4.5 l/min

Bending bench Geka Max width 2.03 m Thickness 1 mm Scale 180° Bending beam spring-assisted Length 2.40 m Width 0.80 m Height 1.10 m Weight 500 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: split, for press brake -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 38 x 256 mm -Total length: 148 mm / 1 x 78/70 mm each -Weight: 8 kg

I - beam section - flat steel: 50 x 10 mm I-beam section - upend: 80 x 15 mm I-beam section - upend: 80 x 15 mm L-beam: 50 mm round material: 30,0 mm bar material dia. max.: 1 1/2 mm bar material - diameter: 30,0 mm weight: 185 kg range L-W-H: 670 x 530 x 1350 mm square material: 40 x 40 x 3 mm pipes: 60 x 2,0 mm total power requirement: 0,75 kW Equipment: • Base frame of the machine • Foot switch • Standard-rolls (divided) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 2000 mm Max. sheet thickness: 8 mm steel Clockwise and counterclockwise rotation Motorized rear roller infeed Safety kill switch Conical rounds possible

100 ton x 3000mm 3i Graphic control 8 Axis With tooling

Technical data of the used Lisse Z4-30 calender: Upper roller diameter: 230 mm Diameter of lower rollers: 170 mm Machine dimensions: 4800 x 1250 x 1300(h) mm

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, 3-piece -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 39 x 250 mm -Total length: 1265 mm / 1 x 500/400/365 mm each -Weight: 65 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool angle: 90° -Dimension: 37 x 255 mm -Dimensions: see the drawing in the photos -Length: 100mm -Weight: 4.9 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake -Tool angle: 40° -Dimensions: see drawing in the photos -Dimensions: 23 x 234 mm -Length: 50 mm -Weight: 1.9 kg

Technical data of the Faccin HAV 3162 hydraulic plate calender used: Upper roller diameter: 620 mm Diameter of side rollers: 550 mm Machine dimensions: 8600 x 3500 x 3700(h) mm Weight: 90.000 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake -Tool Angle: Radius 12.5mm -Dimensions: see the drawing in the photos -Dimension: 22 x 262mm -Length: 750mm -Weight: 32 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8 -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg

Base for bending tool, bending tool, die, lower knife, lower tool, prism tool -Lower tool: for press brake -Total length: 3020 mm -Prism: 20 mm x 90° -Dimensions: see drawing in the photos -Total dimensions: 3020/65/H110 mm -Weight: 136 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet for bending tools, dies, upper knives, upper tools, straight tools -Tool cabinet. Drawer cabinet, sturdy design -2 drawers/3 shelves: layout/height see photos -lockable: with 1 key -Dimensions: WTH 640/930/H1215 mm -Weight: 177kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 75 x 119 mm -Total length: 2505 mm / 3 x 835 mm -Total weight: 63.2 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° / 3 mm flat -Dimensions: see drawing in the photos -Dimension: 80 x 119 mm -Total length: 835 mm / 1x 400/200/100/50/40/20/15/10 mm each -Total weight: approx. 22 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 35° -Dimensions: see drawing in the photos -Dimension: 26 x 120 mm -Total length: 1615 mm / 1x 670/465/250/170/60 mm each -Transport dimensions: 720/220/H50 mm -Total weight: 24 kg

Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 4 pieces -Tool angle: 40° -Dimensions/lengths: see drawing in the photos -Transport dimensions: 1000/130/H70 mm -Total weight: 32.1 kg

Key data: 60 mm, 2 mm

Bending capacity: Ø60 x 2 mm Bending angle: 0 - 180° Turret: 12-way adjustment Mandrel length: 4500 mm Bending tools: - Ø 22 mm - Ø 25 mm - Ø 48 mm Equipped with: - 3 thorns - Mandrel retraction device - Foot pedal - Bending speed adjustment Country of origin: the Netherlands Motor power: 7.5 kW Machine LxWxH: 5350 x 1100 x 1100 mm Machine weight: 2300 kg

Bending tool, die, upper blade, upper tool, straightening tool -Tool: for press brake, length 2020 mm -Tool angle: radius 5 mm -Dimensions: see drawing in the photos -Dimensions: 2020/27/H95 mm -Weight: 23.4 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: Item No.: 12 00 00 204 RT8 -Profile diameter: 25 mm / 1 -Dimensions: see photos -Dimensions: 175/140/H82 mm -Weight: 3.8 kg

Automatic 3D wire bending machine was manufactured in Poland in 2022. The machine is used to automatically bend cut wire with a diameter of 4 to 8 mm. The structure made of thick-walled steel profiles, together with high-quality components, guarantee high bending precision and reliable operation. The automatic wire bending machine is equipped with a bending head with carriage and grippers and a wire feeding module consisting of a cut wire magazine and a choiceor mechanism. The workpiece taken from the magazine with a capacity of 150 kg, is fed via the wire choiceor mechanism into the feed channel, where it is pushed into the bending head and processed. At the end of the process, the bent wire falls into a receiving hopper or support table. All the capabilities of the wire bending machine are controlled by an installed PLC with an intuitive interface, taking care of the performance  ...

Manufacturer: Sahinler Type: PK-30 F Year of construction: 2018 Shafts: 30 mm Lower rollers: 118 mm Top roller: 148 mm Rotation: 26-12 rpm Location: Homburg, Germany

pressure: 100 t chamfer lenght: 2050 mm distance between columns: 1550 mm throat: 250 mm stroke: 200 mm adjustment of press crosshead: 200 mm stroke speed - idle stroke downwards: 105 mm/sec stroke speed - idle stroke upwards: 180 mm/sec stroke speed - under load: 9,5 mm/sec table width: 200 mm table height over floor: 900 mm dayligth: 280 - 480 mm back stop - adjustable: 3 - 729 mm control: CYBELEC SYNCHRO control: CNC 7400 PS total power requirement: 7,5 kW weight of the machine ca.: 10 t dimensions of machine L x W x H: 3,70 x 2,45 x 2,80 m Accessories: programmable back gauge, table extensions, various upper and lower dies segments The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 47 mm -Mounting: Ø 33 mm -Dimensions: see photos -Dimensions: Ø 125 x 84 mm -Weight: 4.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: mm -Hole: Ø 20 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 163/82/H98 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 22 mm -Dimensions: see photos -Dimensions: Ø 102 x 113 mm -Weight: 4.0 kg

Offer 22564 Specifications: - Printing capacity 150 t - Working width 2600 mm - Passage between uprights 2100 mm - Table width 180 mm - Projection 250 mm - Installation height 325 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 3000 x H 2400 x D 1600 mm - Weight approx. 7000 kg - With: - Two-hand control panel with foot switch

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 3/4 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 110/75/H55 mm -Weight: 1.5 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 91/63/H51 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 130/65/H65 mm -Weight: 1.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Type: 1 1/4 -Hole: Ø 20 mm -Dimensions: see photos -Dimensions: Ø 72 x 90 mm -Weight: 1.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Hole: Ø 16 mm -Dimensions: see photos -Dimensions: 300/97/H100 mm -Weight: 3.1 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Hilmor, aluminum tube bending tool for profile bending machine -Profile diameter: 16 mm -Dimensions: see photos -Dimensions: 118/110/H58 mm -Weight: 0.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Ulisch, tube bending tool made for profile bending machine -Type: 3/8 -Hole: Ø 26 mm -Dimensions: see photos -Dimensions: 76/40/H80 mm -Weight: 0.7 kg

Serialnumber: 20610011 Year of construction: 2020 Volt / Hz / Kw: 400 V / 50 Hz / 0.75 Kw Country of origin: Germany

Specifications Ø tubes / radius in mm: Ø 22 / 67 Ø tubes / radius in mm: Ø 10 / 36

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Klaeger, pipe bending tool for profile bending machine -Type: R1/2 -Hole: Ø 30 mm -Dimensions: see photos -Dimensions: 86/57/H56 mm -Weight: 1.1 kg

Press brake tool, bending tool, die, upper knife, upper tool, straight tool -Bending tool: length 515 mm -Tool angle: 90° -Dimensions: see drawing in the photos -Dimensions: 515/14/H75 mm -Weight: 3.8 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 4 pieces -Profile diameter: 21 mm -Hole: Ø 36 mm -Dimensions: see photos -Shipping/Price: complete -Transport dimensions: 205/93/H65 mm -Weight: 4.6 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 26 mm -Hole: Ø 36 mm -Dimensions: see photos -Dimensions: 87/50/H66 mm -Weight: 0.9 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 21/26/52 mm see photos -Hole: Ø 36 mm -Shipping/Price: complete -Transport dimensions: 190/185/H115 mm -Weight: 10.3 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 1 piece -Profile diameter: 62 mm see photos -Hole: Ø 31 mm -Transport dimensions: 295/115/H90 mm -Weight: 6.1 kg

Bending capacity: Ø45 mm Bending angle: 0 - 180° Bending turret: 8-fold angle adjustment Mandrel length: 4000 mm Bending tools: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Equipped with: - 4 Thorns - Mandrel retraction device Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 9 pieces -Profile diameter: 27 to 60 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 655/350/H120 mm -Weight: 42 kg

Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 5 pieces -Profile diameter: 18 to 44 mm see photos -Hole: Ø 32 mm -Shipping/Price: complete -Transport dimensions: 255/350/H55 mm -Weight: 11.3 kg