sheet bending used for sale

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm -Weight: 35 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IP 10 with swiveling support ring -Clamping range: 0 - 50 mm -Load capacity: 6 t -Number: 8 terminals available -Price: per piece -Dimensions: 300/100/H430 mm -Weight: 25 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUNZ with swiveling support ring -Clamping range: 0-32 mm -Load capacity: 6 t -Number: 23 terminals available -Price: per piece -Dimensions: 280/100/H455 mm -Weight: 23 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: IP, Safety lifting clamp type IPUN with swiveling support ring -Clamping range: 0-40 mm -Load capacity: 9 t -Number: 7 terminals available -Price: per piece -Dimensions: 300/110/H470 mm -Weight: 28 kg/pc.

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IP N with swiveling support ring -Clamp range: 0-40 mm -Load capacity: 6 t -Number: 6x clamps available -Price per piece -Dimensions: 280/100/H460 mm -Weight: 26 kg/pc.

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 20-40 mm -Load capacity: 12 t -Quantity: 2x clamps available -Dimensions: 330/90/H365 mm -Weight: 48 kg/pc.

Carrier claw, sheet metal clamp, sheet metal claw, carrier clamp, sheet metal gripper, material gripper, material gripper, plate gripper, lifting claw, lifting clamp, screw clamp -Manufacturer: Seebeck, sheet metal clamp screw clamp type 76 -Clamping range: 8-32 mm -Load capacity: 8 t -Quantity: 1x clamps available -Dimensions: 275/80/H300 mm -Weight: 30 kg

beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: Siegert, Sheet metal clamp: Lifting clamp type SGK -Grip width: 1-75 mm -Load capacity: 2500 kg -Dimensions: 300/150/H390 mm -Weight: 17 kg

Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp, sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal clamp: Safety lifting clamp with swiveling support ring -Type: 3TSEVLA x 06T 1 28A -Clamping range: 0-35 mm -Load capacity: 3 t -Dimensions: 200/80/H320 mm -Weight: 7.6 kg

Sheeting machine Seewer Rondo SKO 63 for all doughs for rolling out and touring Extendable table left Dough sheeter mobile Connection 400V, 16A-CEE plug Used machine

Dough sheeter with simple manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400 V, 16A-CEE plug Used machine & SAB tested Quality from a specialist company! Benefit from over 35 years of experience!

Sheeter Sinmag SM 520 F Easy manual operation for all doughs for rolling out and touring Tables can be folded up Connection 400V, 16A-CEE plug Used machine

Sheet metal plastering machine Jeros 5015/828 for 2-edge trays Stainless steel version with lubrication Connection 400V, 16A-CEE plug Used machine

Color: Yellow Original packaging Price per unit = 12.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 12.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Checked and cleaned Good working conditions

Sheeting machine FRITSCH; Type: Rollfix 60/650 E -in bakery condition- - Automatic flour shaker - Automatic reel - storable programs - Multiple degrees of reduction - Freely programmable curve settings - LCD display - El. Connection: 3x 400 V, 230 V, 50 Hz, 3 Ph, 11.0 A, 1.4kW - Strip width: 650 mm - Condition: Good, ready to use The machine is in good condition and ready for immediate use. Visits and test runs are possible by arrangement.

Sheet metal cleaning machine KD Putz Tubur 600 for 2 edge trays - Sheet metal cleaning machine with brushes - Manufacturer: KD Bakery Equipment - Type: Tubur 600 - 1.1 kW

Guillotine Shears - Safan Darley M-Shear 310-6 TS200 – BJ 2020

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Basic technical features: Capacity 12 Ton Gear weight: 5.6 Ton Telescopic Year 2006 Plant in excellent conditions of use.

Spout-hand wash combination, stainless steel

Sheeting machine, model 613 with long-knitting machine, Fabr. Seewer,

used sheeter Seewer Rondo Kombi 614, overhauled, Masch.-Nr. 0617 01

Highest sheet capacity at 400 N/mm2 x 1000x2 16 A plug Length 1.30 m Width 0.4 m Height 1.30 m Weight 250 kg Tools

Filter housing of stainless steel for plates 600 x 600, with manual hydraulic. Size for 80 plates. 78 plates on stock. Plates maximum: 80 Plate formats: 600x600 Platefilter features: Manual spindl

Hyraulik press 51x Kunstoffplatten Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 250x90x130 cm Distance between first plate and spindle approx ca. 90cm

including 36 plastic plates and 2 end plates of stainless steel dimension ca. 260x90x160 cm Distance between first plate and spindle approx ca. 120cm

with manual hydraulics and 79x plastic filter plates 1x VA starter plate 1x VA end plate Plates maximum: 150 Plate formats: 600x600 Platefilter features: Manual spindl dimension ca. 380x100x140 cm Distance between first plate and spindle approx ca. 200cm

Plate formats: 400x400 Platefilter features: Manual spindl Details Offered without filterplates. We offer separte filterplates in plastic or stainless steel. Dimension ca. 300x60x100 cm Distance between first plate and spindle approx. 170cm

material width: 0300 mm material thickness: 2,50 mm no. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mm straightening speed: 5 - 30 mm/min sheet thickness - min.: 0,40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Features: • All upper rollers manually adjustable • All lower rollers interconnected via gears • Speed manually adjustable via handwheel • Strip guide at the infeed • Roller basket at the outfeed • Sensor arm for loop control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combi sheeter Seewer Rondo SKO 611 Year of Make: 2007 Condition: cleaned and tested 1 tape renewed Suitable for all types of dough (rolling out & touring) Stainless steel cladding With computer control Belt width: 635 mm Roller width: 670 mm Roller opening: 0.3 ? 45 mm

Dough Sheeter Seewer Rondo SSO 62 Bakery condition, repaired Year of Make: 1998 Belt width 58 cm Fully automatic or manual operation Digital control

Sheet metal cleaning machine AWS Reini R60L Automatic Feed For sheet metal dimensions 98 x 58 cm For 2, 3 and 4 edge trays Dry cleaning Dimensions LxWxH: approx. 80 x 60 x 105 cm High output with up to 200 sheets/hour Easy operation, care and maintenance Movable on castors (with hold-up)

Sheeter Fritsch Rollfix Condition: repaired Incl. new scrapers New belts for an extra charge

Sheeter with centering belts Nanmak DS 760 Year of Make: 2022 Condition: Test Machine Belt speed infeed/outlet separately adjustable Roller speed adjustable Adjustable roller gap Belt width 76 cm Working length 172 cm Length per band 81 cm Band height from the ground: 108 cm Centering belt also available as 3 rows Flour shakers External dimensions (LxWxH): 172x110x150 cm

Professional fully automatic packaging system from a renowned European manufacturer consisting of 3 components: feed belt, fully automatic angle welder and shrink tunnel. The machines can therefore be operated together or individually. Suitable for packaging food, technical articles, printing and paper products, household goods and toys as well as textiles, for example. Feed belt GH 1000 / 400: -Speed infinitely adjustable. -Automatic / manual operation selectable. -Length approx. 1 m. -Usable width approx. 400 mm. -Adjustable side guide. -Height adjustable via machine feet. Fully automatic angle welder FP 6000 CS -The angle welder has several monitoring sensors, light barriers or photocells to control the automatic process, as well as mechanically adjustable product chicanes. User-friendly control panel with extensive functions and setting options such as automatic and set- ...

Dough sheeter WP Kemper Quadro Relax S Modular high-performance roll line for processing roll dough with long pre-proofing Head machine with dough strand former, 2x flour shaker, RelaxS roller mill, SoftCut weighing knife, stamping station and extendable and cleanable EasyPull conveyor belt Products: square biscuits (TA: max. 170) Weight range: 25 to 1000 g/pc (depending on the knife roller) Capacity: max. 800 kg dough/h Hourly output: max. 10,000 pcs/h (with 5-row operation) Working width: 800 mm Depositing device with take-off length max. 2000 mm Touch Screen Control

material width: 1650 mm material thickness: 3,00 mm no. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm between stands ca.: 1720 mm run-in height: 1250 mm total power requirement: 45 kW weight of the machine ca.: 24,50 t dimensions of the machine ca.: m 6-HIGH LEVELER / Strip Leveler / with Quick-Change System - 18 Back-up Supports - Digital Roll Adjustment (0.01 mm resolution) - Gearbox renewed in 2021 - Quick-Change System The quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position. The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic. - Intermediate Rolls The intermed ...

A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible.

used dough sheeter from Seewer type SFA69 with digital control, roller width adjustment automatically. Machine is completely made of stainless steel, mobile on castors with brake.Trade-in and shipping on request.Contact us for any further questions. -Stainless steel -with digital control -2 protective grilles -400 volts

Sheeter Fritsch Rollfix 3W 600 for all doughs for rolling out and touring Manual control simple technique! with hand and foot control Machine mobile Connection 400V,1.1 kW, 16A-CEE plug Dimensions approx. 2800 x 1205 mm, WxD Used machine We carry a wide range of bakery equipment!

Sheeter TOP Seewer Rondo SSO 64 for all doughs for rolling out and touring simple, robust technology! Manual control only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 2800 x 1235 mm, WxD Used machine & SAB tested Visit our large exhibition!

Sheeter Seewer Rondo SKO 67 for all doughs for rolling out and touring easy to use! robust technology! Effective pressure plate with adjustment Combi dough sheeter mobile only DGUV V3 tested by us Connection 400V, 16A-CEE plug Approx. dimensions: 1800 x 1195 x 1220 mm, WxDxH Used machine overhauled & SAB tested Visit our large bakery equipment exhibition!

Sheeter Fritsch Rollfix 3W 630 Comfort for all doughs for rolling out and touring Stainless steel version simple, robust technology! Pressure plate with adjustment for long rollers/bread long-weavers only DGUV V3 tested by us Connection 400V, 16A-CEE plug Dimensions: 2800 x 1230 mm, WxD Used machine & SAB tested Come and visit us!

Industrial Heavy Duty Sheet Metal Plastering Machine Jeros Model: 9029TS with 9020 Capacity: 800-1000 sheets/hour with lubrication/system for external oil containers Touch Screen Control for Automatic Baking Tray Cleaning robust technology! Connection 400V, 6+4 kW, 16A-CEE plug Used device cleaned Visit us!

Reini 2000 sheet metal cleaning machine Output approx. 650 sheets/hour with sheet metal lubrication Approx. dimensions: 2000 x 1050 x 905 mm, WxDxH Used machine

A Bullmerwerk fabric spreading machine including a Wastema band knife cutting machine is available. 1) Bullmerwerk fabric spreading machine, ESV20-160, max. fabric width: 1800mm, table length range: approx. 9500mm-13500mm, table width range: approx. 1800mm-2000mm, max. ply length: approx. 11000mm. Year of manufacture: 1985. 2) Wastema band knife cutting machine, cutting height range: approx. 250mm-300mm, throat depth range: approx. 750mm-1270mm, band knife speed: approx. 16m/s, weight: approx. 300kg. 3) Rietschle SKG 226-2.02 vacuum unit, year of manufacture: 1984. The system including 3 pieces km Mack KS-AU-V, speed: 3000/3600 rpm. Inspection possible by arrangement.

Multi-Rip Saw Kälin CML Type SCA 350 KA-N Built in 1995 Chain width 350 mm Chain with spikes (approx. every second chain link) With 3 laser directional lights Cutting height maximum 120 mm Motor power 22 kW Saw blade diameter maximum 350 mm Saw blade diameter minimum 220 mm Saw blade bore 70 mm Saw shaft 3500 rpm Feed speed 0 – 36 m/min. Maximum passage width 800 mm Feed motor 1.5 kW Operating current 49 A Weight approx. 2,200 kg