sheet bending machines used for sale

Manufacturer: Fasti Model: 902-315/40 Year of Manufacture: 1990.The machine was last retrofitted in 2019. Type of Machine : Bending Machine Technical Specifications - Total Weight : 25,000 kg - Nominal Pressing Force : 3150 kN - Stroke Length: 250 mm - Working Width: 4050 mm - Maximum Working Pressure: 30 MPa - Stopping Time: 71 ms - Two-Hand Release Safety Distance : 114 mm Find more here - / Contact us at -

Technical data Press force approx. 3200 k Bending length approx. 4420 mm TASC 6000 control system Projection 420 mm Free stand passage approx. 3680 mm Usable installation height approx. 615 mm Weight machine approx. 23400 kg Facilities - Stable machine frame press beam, stress-relieved annealed with high bending strength - Spherical bearing of the press beam (inclined position)- Electro-hydraulic upper drive with 4-cylinder technology - Optical set-up and positioning aid - Generous edge clearance - Flat Front Cover Narrow Block Hydraulic Electronic Pressure Compensator - Measuring system with glass scale and suspension compensation - Hydraulic oil in the machine (lifetime lubrication)- Oil cooler - Control cabinet cooling via air-to-air heat exchanger - Modern machine design Extended equipment - 6-axis backgauge system - Hydraulic upper tool clamping - CNC crown ...

Key data: 300 t

For sale is a hydraulic gantry straightening press (H-frame) from the manufacturer Durendus with a maximum pressing force of 300 T. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 1,000 mm and a stroke of up to 600 mm, making it particularly suitable for straightening, tuning and heavy forming work in industrial use. Technical data + information: Hydraulic gantry straightener – H-frame – 300 t 1,500 × 2,000 mm General information - Name: Hydraulic portal straightening press - Type: H-frame / portal press - Manufacturer: DURENDUS - Press force: 300 T (adjustable) - Distance between the stands: 1,580 mm - Table size: 1,500 × 2,000 mm - Bridge travel: 1,500 mm - Lateral travel (center): ±500 mm - Max. installation height: 1,000 mm - Table height from the ground: 950 mm - Plunger extension: 200–400 mm - Total weight: approx.  ...

Key data: 200 t

DURENDUS DPS-200 – Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm The machine shown here has already been built and delivered on behalf of a customer. We can remanufacture this machine for you at very short notice. It is a hydraulic gantry straightening press from the manufacturer DURENDUS with a maximum pressing force of 200 t. The machine has a table size of 1,500 × 2,000 mm, a maximum installation height of 800 mm and a stroke of 400 mm, making it ideal for straightening work, press-fit processes as well as applications in steel construction and toolmaking. Technical data + information: Hydraulic gantry straightening press – 200 t – 1,500 × 2,000 mm General information Manufacturer: DURENDUS Model No.: DPS-200 Type: Gantry press / H-frame Press force: 200 t (adjustable) Total weight: approx. 8,500 kg Dimensions (W × D × H): approx.  ...

consisting of: frame shelf, loading magazine: 15-fold, max. loading length: 6,000 mm, automatic feeder, bending unit, power: 3.87 kVA, dead weight: 2,530 kg, with separate control unit, type: MBF372, switch/control cabinet system with cooling unit, Fabr. RITTAL

Tarzan, Working width 65mm, lever length 740mm. Auction-ID: A1-45188-218

Hand bending machine Flat bar 30 x 8 mm Square steel 12 mm Round steel 15 mm Weight 0.025 t Package size max. 51 x 31 x 22 cm Condition: never used / new (5) Auction-ID: A1-45681-881

A Häusler rolling and bending machine is available. Number of rollers: 3, section modulus: 46cm², max. flat material capacity at 1000mm: 100mm/20mm, max. pipe capacity at 900mm: 102mm/6mm, max. square material capacity at 600mm: 60mm/60mm, max. T-profile capacity at 1200mm: 1200mm/1200mm/13mm, shaft diameter range: 125mm-135mm, machine dimensions X/Y/Z: approx. 4500mm/1700mm/1500mm, weight: approx. 6500kg. An on-site inspection is possible.

Working height: 1035mm, usable width: 6000mm, max. usable length: 6000mm, max. wire diameter: 12mm, max. tensile strength: 650N/mm², bending capacity (number of bars): Ø12mm: 40 bars, Ø10mm: 60 bars, Ø8mm: 90 bars, Ø6mm: 150 bars, Ø5mm: 200 bars, geometry/bending data: smallest leg between two angles: 50mm (with bending finger Ø17mm), standard bending finger: no.60, Ø40mm, number of programmable bending angles: 20, memory positions: 100, speeds: first speed: 45°: max. 5.8s, 90°: max. 8.7s, 180°: max. 13.7s, second speed: 45°: max. 2.9s (complete cycle forward/backward), 90°: max. 4.4s (complete cycle forward/backward), 180°: max. 6.8s (complete cycle forward/backward), mechanics/hydraulics: 4 double-acting hydraulic cylinders, hydraulic unit with pumps, solenoid valves, pressure regulators, safety valves, delivery without oil, operation/control: control panel with keyboard  ...

Hand bending machine Flat bar max. 16 mm Square steel 16 mm Round steel 16 mm Weight 45 kg Bending angle max. 180 ° Dimensions L x W x H 0.4 x 0.4 x 1.1 m Auction-ID: A7-45761-892

Flat bar bending machine Flat bar 100 x 5 mm Square steel 16 x16 mm Round steel 18 mm Angle steel 100 x 8 mm Dimensions L x W x H 400 x 290 x 280 mm Weight 35 kg Auction-ID: A7-45761-869

Press brake Amada Astro HDS 1030 / NTR BJ 2010

Key data: 170 t

Trumpf Press Brake Trumabend V170, 1700KN, Stroke: 365,. L-530cm, W- 240cm, H-300cm, Weight: 18to,

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 430 C Year of manufacture: 2014 Edge thickness: approx. 0.4 – 8 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 11 m/min Control: Electronic control system (Brandt / HOMAG control) Processing units: Pre-milling, gluing unit, end trimming, trimming, radius scraping, buffing Glue system: Hot-melt glue unit (EVA / optional PU) Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 20 A Full load current: 18.5 A Control voltage: 24 V Machine number: 0-261-04-6048 Remarks: One-sided edge banding machine for processing straight edges with automatic edge feeding and post-processing units; suitable for industrial woodworking applications :contentReference[oaicite:0]{index=0} Approx. own mass: 1700 kg Approx. dimensions (LxWxH): 4800 x 1200 x 1600 ...

Machine type: Edge banding machine (single-sided) Manufacturer: BRANDT Model: OPTIMAT KDF 220 C Year of manufacture: 2012 Edge thickness: approx. 0.4 – 6 mm Workpiece thickness: approx. 8 – 60 mm Feed speed: approx. 10 – 11 m/min Control: Electronic control panel (Brandt / HOMAG) Infeed: Manual infeed with driven conveyor chain Edge magazine: Rotary edge magazine (visible) Processing units: - Pre-milling unit - Gluing unit (hot-melt) - End trimming unit - Trimming unit - Radius scraping unit - Buffing unit Extraction: Extraction hood with multiple connections Glue system: Hot-melt glue application Power supply: 400 / 230 V, 3 phase, 50 Hz Fuse protection: 16 A Full load current: 14 A Control voltage: 24 V Machine number: 0-261-09-2410 Remarks: Compact single-sided edge banding machine for straight edges with standard processing units ...

Key data: 200 t

Horizontal Hydr. Straightening and bending press, 200 tons, hand and foot control, hydraulics. 18kw, with bending tools.

UD = double bending; complete with set of tools; CNC controlled backgauge; hydraulic top clamping Auction-ID: A1-45793-1

including various tools; Extra option profile bending unit Auction-ID: A1-45793-25

Key data: 2000 mm, 500 mm, 500 mm

Manual bending bench, 2 m long, with extendable base frame for installation in transporter

Stored in working condition with numerous accessories, digitally adjustable with control box. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17029

Stored in working condition. The buyer must provide his own transport. Elevator available to charge it. Auction-ID: A3-43519-17028

Serial number: 223084 max. sheet width: approx. 1000 mm with mechanical hand lever operation Auction-ID: A7-46287-193

Stored in working condition, buyer must provide transport himself. No elevator available. Auction-ID: A3-43519-17020

tube diameter:40-90 mm wall strength:20 mm weight of the machine ca.:11 t dimensions of the machine ca.:4 x 1,6 x 1,35 m bending radius max.:270 mm This machine is a mandrel bending machine that was designed exclusively for the production of pipe bends with pipes of 40 mm ? 90 mm outer diameter with a maximum wall thickness of 20 mm or for processing solid materials up to 70 mm outer diameter (max. section modulus 64.7 cm³) and is therefore intended only for this purpose. Scope of delivery, machine equipment, basic equipment ? Pipe length/usable length for mandrel bending: 3000 mm ? Radius range max. 270 mm ? Bending height 1050 mm ? Electro-hydraulic drive ? Clockwise bending direction ? With hollow shaft to achieve small radii ? Counter bearing rotates ? Rotates up to 180 degrees with a maximum tool radius of 270 mm ? Forward movement controlled via hydraulic cylinder with pressure va ...

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

TECHNICAL DATA: Max oscillation length mm: 100 Max depth of slots mm: 80 Spindle center distance min mm: 84 / max 1170 Spindle rotation rpm: 6.000 / 12.000 Processing: double sided Weight Kg: 2250

TECHNICAL DATA: Clamping height max mm: 1040 Tenoning depth max mm: 150 Slot length max mm: 340 Main motor power HP: 3 Weight Kg: 340

Chain resisters L x W x H: 1.2 x 0.8 x 2.2 m Weight approx. 480 kg Year of construction 1977 The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Make : TREPKO Model : 222 KPS Year Of Manufacture : 2004 Machine Dimensions : 1,35 x 1,55x 3,32 metres with conveyor 3,2 meters Product : Butter / Margarine/soft products Cup Dimensions : 115 mm x 75mm Volume : Min 180ml | Max : 500ml Cleaning : CIP Hours : 688,45 Plastic Cup With Aluminium Lid and Cover Cap Condition : Good

Make : Regal Model : 9000 YoM: 2004 Refurbished in 2018 Current Cup Dimensions: 71 mm ( This can be changed on request) Speed : 2400 Cups per Hour Stations : Cup Dispenser- Filler - Aluminium Lid - Sealing - Outfeed conveyor Controls : Very Good condition Available : Immediately after service Location : Dairy Machinery UK

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

CAMAM oscillating mortiser with 2 benches mod. MO/2A - 4 spindles -Volt. 380/50 - Matr. 145

BACCI multiple oscillating mortiser mod. MX90 - 5+5 horizontal spindles - 2+2 vertical spindles - Selectable spindle revolutions motor per motor. . laps 1' 6000/12000 - Max. slot inclination 20° - Tilt to and from the outside – standard -7° + 30° - Max. distance between spindles 1280 mm - Matr. 228 - CE standards - Year 1999 - Complete with manual and CE declaration

Machine is in good condition.

Oscillating mortiser with 2 benches BALESTRINI mod. 2CAP

REF-2665 ILPRA FS 2500 V/G AUTOMATIC CUP FILLER-SEALER Manufacturer: ILPRA Series: FILL SEAL Model: FS 2500 V/G FL Serial no.: FS1071 Year: 2017 Automatic rotary filling-sealing machine for cups of different materials. Compact and flexible model, tailored to handle a diverse range of food products from liquids and creams to granules, even with solid particles in suspension. Maximum output of approximately 2,500 pieces per hour. Voltage: 400 V + N Overall dimensions (mm): 2,350 x 1,280 x 2,200 (LxWxH) Weight: approx. 900 kg

Bulk Distribution Station

Grunwald Fully automatic cup filling and sealing system - 3 Format sets (BJ 2019) - Ink-jet encoding - Conveyor belt extension - Dosing bar incl. aerator inserts (BJ 2020) Filling Temperature: Cold Filling Cup: A) Round plastic bucket with handle and collection basket, ø175 x H 131 mm B) Round plastic cup, approx. ø 104 x H 55 or 65 mm C) Round plastic bucket with handle and grass collector, ø 227 x H 194 mm Lid: A+C) Plastic slip-on lid (tamper-evident closure) B) Pre-punched plastic blanks + slip-on lid Connected load: approx. 12 kW, 3/400 V/N/PE, 50 Hz Air requirement: dry, filtered compressed air, 6 bar, approx. 300 l/min. Dimensions: approx. L 2,200 x W 2,200 x H 3,200 mm (without removal belt and control cabinet) Weight: approx. 3,500 kg Condition: well-maintained, in working order Availability: immediately

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

Various machines mostly Wafios or Deiters available! Eg. Wafios UF30 / VDF80 / DF3

We can offer you all types of screw making machinery for M3 - M25

We can offer you all types of Wafios nail machines from S25 - N90

Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

We can offer you all types of Wafios nail machines from S25 - N90

we can offer various wire pin presses, please ask for our list