sheet bending machines used for sale

: neu : ca. 10 Wochen ab Auftrags : Türkei : 5200 € : 100.36 € : 1270 mm : 1.5 mm : 75 mm : 1.5 kW : 1830 mm : 700 mm : 1160 mm : 400 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by ratchet lever longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch user manual in GERMAN or ENGLISH OPTION (PRICE ON REQUEST): hardened rolls The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Türkei : 12900 € : 247.68 € : 40 to : 285 mm : 200x24 mm : 660x1250 mm : 250 mm : 80 mm : 10 mm/s : 10 mm/s : 4 kW : 930 mm : 1250 mm : 650 mm : 1250 mm : 1100 kg Stroke adjustment with digital display Manual and automatic operation mode Tool holder pins and tools hardened and ground Bending tool Foot pedal OPTIONS: Cutting-, punching- or pipe bending tools on request The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 12300 € : 236.16 € : 1270 mm : 4 mm : 120 mm : 3 m/min : 2.2 kW : 2470 mm : 750 mm : 1000 mm : 1110 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in ENGLISH or GERMAN OPTIONS: hardened Rolls Motorised Back Roll (Power Rear Roll) Digital Read-Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 134000 € : 2532.6 € : 3100 mm : 25 mm : 25 mm : 20 mm : 20 mm : 20 mm : 16 mm : 360 mm : 360 mm : 270 mm : 60 mm : 1510 mm : 22 kW : 5560 mm : 2060 mm : 2050 mm : 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solut ...

: neu : 2026 : 090209 : prompt, Zwischenverkauf v : Italien : 7780 € : 150.15 € : 1 : 1 : 42 mm : 400 mm : 570 mm : 1000 mm : 80 kg : 4 cm³ : 42 x 3 mm : 48 x 1,5 mm : 42 x 4 mm : 42 x 2 mm : 42 x 2 mm : 50 x 3 mm : 54 x 2 mm : 54 x 2 mm : 60 x 2 mm : 50 x 4 mm : 30 mm : 40x20 (liegend), 40x12 (s mm : 260 mm : 10 mm : 3,3 U/min : 1.1 kW manual clamping electronic preselection of bending angle digital read our for Clamping position 30 programms with each 9 bends material spring back compensation overload protection mobile by rolls and handle foot pedal tools not included Alternatively also available as following models (prices on request): MB 42M (single phase, 2 U/min) MB 42PM (portable, single phase, 2 U/min) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 43550 € : 831.81 € : 1550 mm : 12 mm : 12 mm : 10 mm : 10 mm : 8 mm : 220 mm : 200 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 3900 mm : 1150 mm : 1250 mm : 3600 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 %  ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 28450 € : 543.4 € : 1550 mm : 7 mm : 7 mm : 4.5 mm : 4.5 mm : 3.5 mm : 150 mm : 150 mm : 130 mm : 1,5 / 6 m/min : 4 kW : 3750 mm : 960 mm : 1100 mm : 2500 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: (time of deliver with options approx. 10 weeks) Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone leng ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 24500 € : 470.4 € : 1550 mm : 4.5 mm : 4.5 mm : 3.5 mm : 4.5 mm : 3.5 mm : 3.5 mm : 2.5 mm : 130 mm : 130 mm : 130 mm : 5 m/min : 2,2 + 1,1 kW : 3300 mm : 1150 mm : 1110 mm : 2370 kg motorized roller drive upper and lower roller driven hydraulic side roll feed 3 digital displays hydraulic folding bearings hardened rollers conical bending device user manual in GERMAN or ENGLISH OPTIONAL EQUIPMENT (PRICES ON REQUEST): overhead crane side supports NC control variable speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

sheet width: 3100 mm plate thickness: 50 mm pre-bending: 40 mm diameter of upper rolls: 540 mm diameter of lower rolls: 500 mm side roll diameter: 440 mm engine output: 55 kW total power requirement: kW weight of the machine ca.: 40 t dimensions of the machine ca.: 6,7 x 3,0 x 3,0 m With: Cone bending device Induction hardened rolls Digital readout for side rolls Fully welded steel (St-52) frame Separate moveable control panel Bending speeds, slow and fast Electronic Parallelism All rolls are mounted in spherical roller bearings Hydraulically opened/closed drop end controlled from control panel Activation of cone rolling function and position adjustment via buttons on the control panel Central rolls (top and bottom rolls) driven by hydraulic motors and planetary gear reducers Electro – hydraulic calibration OPTIONAL FEATURES AND ACCESSORIES: Center support: 21.468,75 € Side supports  ...

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm : 0 - 180 ° : 2 (60.,3mm) mm : stufenlos 0,5 - 2,0 : 1,5 kW : 700 kg - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2070 mm plate thickness: 25 mm pre-bending: 18 diameter of upper rolls: 320 mm side roll diameter: 260 mm diameter of lower rolls: 320 mm : 26 kW : 8100 kg : 4700 x 2000 x 2200 mm Features: - Hydraulic side roller adjustment - Conical bending device - 2 driven rollers - Hardened rollers - Hydraulic folding bearing - Mobile control panel - Foot switch - Safety device - CE mark The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bending diam. - max.: 36.0 mm ST cutting thickness max.: 36.0 mm ST motor: 1450 U/min oil volume: 32.0 l motor: 380 Volt 50 Hz total power requirement: 5.5 kW weight: 650 kg range L-W-H: 1470 x 1200 x 1020 mm Exhibition machine - NEW () Equipment: - Maximum performance, minimum consumption - hydraulic combination machine for bending and cutting processes for e.g. structural steel or solid material - Bending mode with 3x different angle settings - manual and automatic mode selectable - simultaneous bending and cutting processes when the machine is in operation - ECO mode = hydraulic pump only runs when the foot switch is pressed - freely movable foot switch - operating instructions technical data: - steel 45 kg / mm² .. bending Ø 36.0 mm / cutting Ø 36.0 mm for 2x pieces - steel 45 kg / mm² .. bending Ø 20.0 mm / cutting Ø 24.0 mm - steel 65 kg / mm² .. bending Ø 32.0 mm / cutt ...

sheet width: 2050 mm plate thickness: 10.0 mm ST pre-bending: 8.0 mm ST diameter of upper rolls: ~ 205 mm side roll diameter: ~ 195 mm Control: konv. oil volume: 80.0 Liter voltage: 380 V total power requirement: 5.5 kW weight: 3200 kg range L-W-H: 4500 x 1500 x 1300 mm Features: - Robust electro-hydraulic 3-roll bending machine - 3-roll concept offers a wide range of bending and rounding options - Pivoting control unit at the front Operation - Control of all rolls and machine axes Digital position display Manual operation via joysticks - Diameters of up to 1.1 times the top roll diameter are possible - Forged and hardened rolls with a hardness of 53-55 HRC - Low-maintenance, stable machine design - Sturdy welded steel construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge / pressure indicator for the rolls - Safety device (safety lanyard with switch u ...

sheet width: 3200 mm plate thickness: 4.0 mm ST distance between columns: 3300 mm upper clamping bar adjustment: 400 mm Adjustment folding beam: 80.0 mm pivoting angle: 180 Grad clamping capacity max.: 200 KN rear stop: 10.0 - 1600 mm oil volume: 160 Liter total power requirement: 9.8 kW weight: 8500 kg range L-W-H: ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition () - in checked conditions - machinevideo - https://www.youtube.com/watch?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC DNC 80 PP Swiveling control panel, front right 2D graphic display for display and multiple simulation 2D graphic programming Easy handling - CNC electro-motorized backgauge Travel range 10.0 - 1,600 mm Pneumatic / lowerable stop fingers Adjustment speed max. 250 mm/sec. Rear sheet support table with brushes - Electro-motorized l ...

sheet width: 3100 mm plate thickness: 13,0 mm pre-bending: 10,0 mm diameter of upper rolls: 300 mm side roll diameter: 210 mm diameter of lower rolls: 270 mm total power requirement: 11,0 kW Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2600 mm plate thickness: 10,0 mm pre-bending: 8,0 mm diameter of upper rolls: 230 mm side roll diameter: 190 mm diameter of lower rolls: 210 mm total power requirement: 7,5 kW weight of the machine ca.: 5.560 kg. range L-W-H: 4.650x1.380x1.300 mm Furnishing: - electro-hydraulic 4-roller bending machine - 2x driven main rollers (upper & lower roller) - with hydraulic conical bending device - Induction hardened rollers - including straightening function for welded pipes - Control unit / display with touch screen function digital position display for the two side rollers - mobile control panel - 2x bending speeds selectable - hydraulic folding bearing - Safety device (safety line with switch unit) - Pressure gauge / pressure indicator for the rollers - CE mark + declaration of conformity - Operation manual The data for this ad was created with ModulMWS - the software solutio ...

I - beam section - flat steel: 80 x 16 (d 1200) mm I-beam section - upend: 50 x 15 (d 1000) mm L-beam: 50 x 5 (d 1200) mm round material: 40.0 (d 800) mm bar material dia. max.: 70 x 2.0 (d 1600 ) mm square material: 80x30x3 (d 4000) mm channels - flange: UNP 80 (d 800 ) mm bending speed: 4.4 m/min roll diam. toproll: 157 mm bore: 50.0 mm oil volume: 18.0 Liter total power requirement: 1.1 kW weight: 485 kg Exhibition machine from 2025 with only approx. 2x operating hours Condition as NEW Special price on request Equipment: - electro-hydraulic ring/profile bending machine - hydraulic bottom/side roller adjustment for extra small bending radii - bottom/side roller can be adjusted individually - 3x driven rollers - divided roller segments - digital position display of the bottom/side rollers Display with touchscreen function - hardened tool holder (42CrMo4) - machine base - 2x manual ...

tube diameter: 33,7 x 3,4 GAS mm tube diameter: 35,0 x 2,5 STAHL mm tube diameter: 35,0 x 1,5 EDELST mm bending radius min.: R10 - R 190 mm bending angle max.: 0 - 180 ° tool taper: 6-kant 40 mm voltage: 230 V total power requirement: 0,9 kW weight of the machine ca.: 23,0 kg Description: - MediBender 070 digital - with maximum bending performance for 35 x 2.5 mm steel tubes - Excellent bending quality with very tight bending radii . (from 2 x tube diameter) and bending angles between 0° and 180° - Easy to operate - High accuracy and reliability - Fast tool changes (within seconds) - Easy to transport - Huge selection of affordable standard tools (metric, gas inch, inch) BENDING SEGMENT AVAILABLE FOR AN ADDITIONAL CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 42.0 x 3.0 STAHL mm tube diameter: 30.0 x 2.0 EDELST mm bending angle max.: 180 ° bending radius max.: 100 mm bending speed: 2.0 U/min. Control: NC voltage: 400 V total power requirement: 0.55 kW weight of the machine ca.: 115 kg Current new price approx. 4.200 Euro Very good condition / with machine base Description: - NC electro-motor tube bending machine - mandrelless up to 50 programs can be stored - Automatically returns to the starting position - Maximum bending capacity for 42 x 3.0 mm steel tubes - Excellent bending quality with very tight bending radii (from 2x tube diameter) . and bending angles between 0° and 180° - Easy operation - High accuracy and reliability - Quick tool change (within seconds) - Easy to transport - Includes machine base The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1070 mm plate thickness: 4.0 mm pre-bending: 3.0 mm roll length: 1070 mm roll diam. toproll: 110 mm bending speed: 3.0 m/min engine output: 2.2 kW weight: 848 kg range L-W-H: 2250 x 1000 x 1800 mm New price ~ 10.000 euros Exhibition machine - like NEW () Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (top & bottom roller) - right/left running of the rollers - top roller can be manually swiveled out, with folding bearing - manual delivery of the side roller - including conical bending device - asymmetrical roller arrangement - rollers with profile inlets - safety device (safety line with switch unit) - 1x freely movable control panel - operating instructions (ENG) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 10.0 - 42.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 54.0 mm CU/Alu bar material - diameter: 30.0 mm wall strength: 2.0 mm revolutions per minute: 1.30 U/min voltage: 400 Volt total power requirement: 1.5 kW weight: 110 kg range L-W-H: 400 x 450 x 570 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 42.0 x 3.56 mm - Gas tube capacity: 1 1/4 Gas x 3.5 mm - Square profile capacity (FE 42) 40 x 20 x 2.6 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Features: - Patented quick tool change system - One bending speed - Digital machine display - 1x freely movable foot switch - 1x bending tool set included Additional segments available upon request for an additional charge ERCOLINA tool holder The data for this ad was created with ModulMWS  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 55900 € : 1056.51 € : 3100 mm : 9 mm : 8 mm : 7 mm : 7 mm : 5 mm : 245 mm : 245 mm : 180 mm : 1,5 / 6 m/min : 7.5 kW : 5350 mm : 1600 mm : 1470 mm : 6850 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more than 60 % of  ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 40900 € : 781.19 € : 2050 mm : 10 mm : 10 mm : 8 mm : 8 mm : 6 mm : 200 - 220 mm : 200 - 220 mm : 160 mm : 1,5 / 6 m/min : 5.5 kW : 4400 mm : 1150 mm : 1250 mm : 3950 kg 4 rolls Top rolll driven by hydromotor and planetary gearbox, bottom roll driven by gear and cardan system Pinch roll and latereal rolls move with hydraulic cylinders Digital read-out for lower and side rolls position Hardened rolls Conical bending device Hydraulic load relieving of upper roll Hydraulic drop-end bearing 2 working speeds Protectionagainst overload Moveable control pane According to CE rules OPTIONAL EQUIPMENT: Infinitely adustable speed of rolls Hydraulic side support Hydraulic top support NC control IMPORTANT ISSUES AT CONICAL BENDING: The max. sheet metal thickness isequivalent to 50 % of nominal capacity The cone length can be max. 30 % oremust be more  ...

: gebraucht : 2023 : 9691 : prompt, Zwischenverkauf v : Türkei : 24600 € : 1 : 85 mm : 247 mm : 3 : 7.5 kW : 80x20 mm / 500 mm, 30x10 : 120x30 mm / 650 mm, 50x10 : 50x50 mm / 500 mm, 30x30 : Ø 50 mm / 500 mm, Ø 20 mm : Ø 100x2,5 mm / 1.300 mm, : 80x40x4 mm : 70x70x4 mm : 80x8 mm / 1.200 mm, 30x3 : 80x8 mm / 800 mm, 30x3 mm : 1580 mm : 1200 mm : 1410 mm : 2350 kg demo machine / mint condition net price 3 driven rolls (hydromotor and planetary gear) strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions plane rolls lateral rolls (forward-backward hydraulic, rest manual) horizontal and vertical operation Control console forfor- andbackward drive machine and equipment according to theCE regulations INCL. OPTION: CONTINUOUS SPEED WE HAVE MORE THAN 235 REFERENCES! BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE W ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 20400 € : 391.68 € : 80 mm : 245 mm : 3 : 4 kW : 6 m/min : 100x20 mm / 2000 mm, 80x2 : 125x25 mm / 600 mm, 60x5 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 500 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.300 mm, 25 : 80x80x8 mm / 800 mm, 30x3 : 70x70x7 mm / 700 mm, 30x3 : UPN 140 / 1600 mm, UPN 12 : UPN 140 / 1.600 mm, UPN 1 : IPN 120 / 600 mm, IPN 80 : 1450 mm : 1000 mm : 1400 mm : 1700 kg 3 motor driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rolls positions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTe ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 62600 € : 1183.14 € : 2050 mm : 13 mm : 10 mm : 13 mm : 10 mm : 10 mm : 8 mm : 240 mm : 240 mm : 190 mm : 820 mm : 11 kW : 3830 mm : 1160 mm : 1200 mm : 5000 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity The data for this ad was created with ModulMWS - the software solution of Logo ...

: neu : ca. 12 Wochen ab Auftrags : Türkei : 51900 € : 980.91 € : 120 mm : 390 mm : 3 : 15 kW : 2/7,5 m/min : 125x25 mm / 1.200 mm, 30x : 200x50 mm / 1.000 mm, 100 : 65x65 mm / 750 mm, 20x20 : Ø 80 mm / 850 mm, Ø 20 mm : Ø 160x4 mm / 2.800 mm, Ø : 120x40x4 mm / 1.800 mm, 3 : 90x90x5 mm / 1.800 mm, 30 : 120x120x12 mm / 1.200 mm, : 100x100x10 mm / 1.200 mm, : UPN 220 / 1.000 mm, UPN 1 : UPN 220 / 1.200 mm, UPN 1 : IPN 220 / 1.000 mm, IPN 8 : 2000 mm : 1650 mm : 1900 mm : 4450 kg 3 rolls driven (hydromotor and planetary gearbox) shafts made of special steel,hardened and ground hydraulic adjustment of the 2 lower rolls hardened universal rolls lateral rolls hydraulic adjustable in 3 axes horizontal and vertical operation mobile operating panel 2 working speeds digital read out (3 axes) machine and equipment accordingto the CE regulations user manual in GERMAN and ENGLISH WE HAVE M ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 34200 € : 653.22 € : 100 mm : 315 mm : 3 : 7.5 kW : 7 m/min : 100x20 mm / 800 mm, 30x10 : 200x30 mm / 1.200 mm, 160 : 60x60 mm / 750 mm, 15x15 : Ø 75 mm / 800 mm, Ø 15 mm : Ø 125x2,5 mm / 1.400 mm, : 100x40x4 mm / 1.300 mm, 2 : 80x80x5 mm / 1.500 mm, 25 : 100x100x12 mm / 1.000 mm, : 100x100x10 mm / 1.000 mm, : UPN 180 / 900 mm, UPN 30 : UPN 180 / 1.000 mm, UPN 3 : IPN 180 / 1.000 mm, IPN 8 : 1465 mm : 2000 mm : 1700 mm : 4000 kg 3 hydr. driven rolls strong welded steel construction lower rolls hydr. adjustable digital read-out for lower rollspositions on seperate control panel lateral rolls adjustable in 3 axes horizontal and vertical operation for- and backward drive machine and equipment according to theCE regulations WE HAVE MORE THAN 210 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoT ...

: neu : ca. 12 Wochen ab Auftrags : Italien : 2500 mm : 8 mm : 8 mm : 4.9 mm : 6 mm : 6 mm Hardened and polished rollers Numerical control Siemens PGS-Classic with touchscreen Cone bending with electronic control and inclination of the bottom roller oil cooler Simultaneous rotation and roller movement Simultaneous roller and support movement Possibility to bend variable radii (ovals, ellipses, etc.) Hydraulic micro-positioning by the PLC for higher accuracy Infinitely variable speed for roller movement Infinitely variable speed for rotation Prepared for retrofitting supports (up to 5 axes) Prepared for retrofitting loading/unloading stations Prepared for retrofitting CNC controls Extra large, double hinged drop end Electronic parallelism system for the synchronization of the rollers Hydraulic lifting of the top roll (for models with a top roll diameter of 205 mm or more) Double linear gu ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 6700 € : 129.31 € : 1270 mm : 2.5 mm : 90 mm : 6 m/min : 1.1 kW : 1850 mm : 700 mm : 1200 mm : 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 273 mm wall strength: 15,1 mm bending radius min.: 150 mm bending radius max.: 1250 mm total power requirement: 30 kW weight of the machine ca.: 35 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Shaft diameter: 40 mm bending speed: 10 U/min : 2 x 3,2 bending capacity - angular iron: 50 x 50 x 6 mm total power requirement: 1,85 kW weight of the machine ca.: 280 kg dimensions of the machine ca.: 560 x 980 x 1430 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 60x3 mm : 60x3 mm : 35 mm : 64x4 mm : max. 210 ° : R10-R300 bending speed: 1,25/2,5 U/min total power requirement: 1,5 kW weight of the machine ca.: 130 kg dimensions of the machine ca.: 595x363x900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: R10-R260 bending speed: 2,5 U/min : 54,0 x 2 mm Sheet thickness aluminum: 54,0 x 2 mm : 42,4 x 3 mm sheet thickness for stainless steel: 42,4 x 2 mm : 30 mm : einphasig - 230 V drive motor: 1,5 kW weight of the machine ca.: 80 kg dimensions of the machine ca.: 363 x 900 x 595 mm ‘ERCOLINA MEDI BENDER’ Single-phase mandrel-less bending machine up to 42 mm Features: - Control system: Soft-touch control panel in 8 different languages - Number of programs: 30, each with 9 bends - Standard accessories (including foot switch, user manual) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 400 kN stroke length max.: 285 mm working feed: 9 mm/sec return speed: 20 mm/sec : 660x1250 mm work height max.: 930 mm toolpiece height max.: 250 mm total power requirement: 4 kW : 200x26 mm bending capacity max. - round: 60x5,0 mm Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm pre-bending: 5 mm upper roll diameter: 200 mm min. bending diameter: Ø 300 mm bending speed: 5 m/min total power requirement: 5,5 kW weight of the machine ca.: 4.000 kg dimensions of the machine ca.: 4800x1300x1270 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 100 mm roll diameter: 315 mm bending speed: 5 m/min bending capacity - flat iron: max. 12 x 20 mm : 75 mm Drive: 11 kW weight: 2.600 kg range L-W-H: 1950x1600x2100 mm Equipment / Accessories: - Two driven rollers - Hydraulic delivery of the upper roller - Digital display with memory function - Working position horizontal and vertical - Bearings with tapered roller bearings - Use of replaceable slide rails on the guide carriage - Footswitch - standard roller set The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 5 mm pre-bending: 5 mm upper roll diameter: 170 mm min. bending diameter: Ø 255 mm bending speed: 4,5 m/min total power requirement: 4 kW weight of the machine ca.: 2300 kg dimensions of the machine ca.: 3800x1100x1130 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

engine: 2,8 KW weight of the machine ca.: 320 kg dimensions of the machine ca.: 86 x 90 x 85 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1550 mm plate thickness: 4.5 mm pre-bending: 4.0 mm roll length: 1550 mm min. dia.: ca. 190 mm roll diam. toproll: 140 mm bending speed: 3.0 m/min engine output: 2.2 kW weight: 1420 kg range L-W-H: 2700 x 750 x 1000 mm Equipment: - robust electro-mechanical round bending machine - 2x central rollers driven by electric motor (upper & lower roller) - upper roller can be swiveled out manually, with folding bearing - including conical bending device - freely movable control panel - lower roller can be adjusted manually, using a handwheel - asymmetrical roller arrangement - self-braking main motor - safety device (safety line with switch unit) - CE mark/declaration of conformity Special equipment included in the price: - hardened rollers - motorized side roller adjustment - digital position display for motorized adjustable side roller The data for this ad was created with Modul ...

tube diameter: 10.0 - 60.0 mm Stahl wall strength: 3.0 mm Stahl tube diameter: 64.0 mm CU/Alu wall strength: 4.0 mm revolutions per minute: 1.25 - 2.50 U/min bar material - diameter: 35.0 mm voltage: 400 Volt Control: ISITAN NC total power requirement: 2.0 kW weight: 140 kg range L-W-H: 380 x 900 x 600 mm Exhibition machine - like new never been used () Special price upon request - Steel tube capacity: 60.0 x 3.0 mm - Gas tube capacity: 2 Gas x 3.91 mm - Square profile capacity (FE 42) 60 x 30 x 4.0 mm - Max. bending radius: 200 mm - Minimum radius: 2 x D - Hexagonal tool holder - Min. outer diameter: 5 mm - 1/8 Gas Equipment: - ISITAN NC digital control unit Control panel = touchscreen 20 sets with 200 programs each - Patented quick tool change system - Continuously adjustable bending speed - One bending speed - 1 free-floating foot switch - 1 bending tool set included Additional  ...

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

sheet width: 1050 mm plate thickness: 2.0 mm roll length: 1070 mm roll diam. toproll: 75.0 mm engine output: 1.5 kW weight: 325 kg range L-W-H: 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use () Special price on request Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60.3 x 4.5 mm ST tube diameter: 60.3 x 5.4 mm ALU tube diameter: 2 x 3.91 mm GAS bar material - diameter: 35.0 mm revolutions per minute: 2.0 U/min bending radius min.: 10.0 mm bending radius max.: 270 mm external diameter: min. 5.0 mm external diameter: min. 1/8 Zoll voltage: 230 V total power requirement: 1.5 kW weight: 76.0 kg range L-W-H: 302 x 243 x 674 mm Equipment: - mandrel-less tube bending machine - Model M = ELECTRO-HYDRAULIC SINGLE-PHASE - high performance and compact design - completely hydraulic machine - bends 210° without the need to catch up - no electronic control - Ercolina patent n. 102017000142179 - control of the bending angle via adjustable angle scale - mobile machine base BENDING SEGMENT AVAILABLE AT AN EXTRA CHARGE The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3050 mm plate thickness: 3.0 mm ST pre-bending capacity: 3.0 mm ST upper roll diameter: 170 mm lower roll diameter: 170 mm side roll diameter: 180 mm Control: konv. 0: 380 V total power requirement: 3.0 KW weight: 4250 kg In good condition With new rubber-coated top roll () Also suitable for bending non-ferrous metals - in checked conditions - machinevideo - https://www.youtube.com/watch?v=ZW8Us6Hbm3E Equipment: - Electro-hydraulic 3-roll bending machine - Asymmetrical roll arrangement - Electro-motor-driven side roll adjustment Including digital position display - Manual bottom roll adjustment Via hand crank - Including conical bending device Inclined bottom roll and side rolls Parallel alignment in any side roll position - Hardened rolls SAE 1050 CK 45 - Manual folding storage for removing closed pipes Top roll must be raised before opening the storage (e.g., forkl ...

angular steel - leg outwards: -- mm double T-iron on the x-axis: -- mm U-iron on the x-axis: -- mm : 50 mm : 150 mm throat: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.