We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,840 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
composed of: Belt infeed belt: • Type: FAG 500-1500 • Width 500 mm • Barrel length 1,500 mm • Speed approx. 25m/min • Working height 850+-50 mm • Power approx. 0.5 kW Film welding machine: • Type: SWS 5020 • Machine size (LxWxH): 2103 x 15653 x 1410 mm • Max product size (lxW): unlimited x max 480 mm • Welding punch width: 500 mm • Passage height: 220 mm • Conveyor belt speed: 35m/min • Film width: max. 650/650 mm • Film diameter max 300 mm • Connection 16A connector, 3ph 380 V • Transverse welding servo motor • Longitudinal welding pneumatic • Working height 850 mm Shrink tunnel: • Type: STA-45 30 • Dimensions: 1.840L x 1080 W x 1250 H mm • Tunnel opening: 1200 L X 450 W X 300 H mm • Product size max: 1700 L x 400 W x 250 H mm • Conveyor belt speed 10-40/min • Weight 520 kg • Working height 850 mm • C ...
used
Combi sheeting machine Second-hand machine - overhauled by a specialist 6 months warranty at call Properties: + mobile combination sheeting machine + Year of construction 1999, workshop overhauled 2023 + suitable for all types of dough for rolling out and touring + equipped with new felt and linen tapes and scrapers + equipped with extendable roll-out table as an extension + all relevant parts have been refelted + with flour container + with trawl net & corrugated mat for beating dough pieces, rolls or breads + with long roll station at the bottom for all doughs for long rolling + Carrier belt for high transport (approx. 83 cm height) of the elongated rolled dough pieces + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine was finally tested by our master baker + comes with instruction ...
used
Machine overhauled & repainted by an expert 6 months warranty Properties: + mobile combination sheeting machine + for all types of dough for rolling out and touring + with circular moulder / circular actuating beam for Seewer Rondo SKO + with new felt and linen tapes and scrapers + relevant parts have been refelted + with trawl net & corrugated mat for wrapping dough rolls or breads + with long-acting station at the bottom for all doughs for long rolling + with high conveyor belt for breads + complete overhaul in our workshop, according to German quality standards + only high-quality original parts are installed + Machine has been finally tested by our master baker & confectioner Technical data SKO 63: Belt width: 615 mm Roller width: 630 mm Roller opening: 0.1 to 30 mm Synchromesh Technical data Rondex: - Rondex length: 154 cm - Insertion height Rondex: 175 c ...
used
Sheeter Seewer Rondo SSO 62 - with digital control - mobile on wheels with lock - with fold-up straps - Band width: 62cm
used
Seewer Rondo Cutting Line / Cutting Table Type: ZFGR. A Year of construction: 2000 with guillotine with multiple reels with 2x filling station, 2 rows per container (total 4 rows) many accessories incl. Strap width: 64cm, very good condition Dimensions: Height: 180cm Width: 500cm Depth: 80cm
used
Seewer Rondo Cutting Line / Cutting Table Type: SPF602 with guillotine with multiple reels Strap width: 64cm, very good condition Stainless steel cladding on castors Dimensions: Height: 185cm Width: 660cm Depth: 80cm
used
Used Rollfix Fritsch 60/650E rolling machine The Rollfix Fritsch 60/650E rolling machine is a model that impresses with its gentle and even dough rolling, simple operation and easily reproducible production results. Suitable for all types of dough, for rolling and unrolling all types of bread dough, rye dough, wheat dough and mixed dough. Key features of the machine: digital control, flour sprinkler, long roller, transport belt width 650mm, roller opening 0.3 - 45mm, gentle and even rolling, production of thin dough, simple handling, processing of dough blocks up to approx. 15 kg, advancement speed 93,3 cm/sec, mobile on rollers, power - 1.4 kW.
used
Duplo DSF 5000 digital sheet feeder Year of construction: 2009 Very good condition! At call!
used
GEBRAUCHTMASCHINE, EFFIZIENT
used
It is a used, reconditioned Seewer Rondo Kombi sheeter SKO 67 for sale. The machine is fully functional, new belts are assembled before delivery. The combined dough sheeter is suitable for all types of dough, turing and rolling out for long-working bread of all types of bread dough, rye, wheat and mixed bread doughs with a straight end, for long-rolling plait, pretzel sticks as well as knitting Parisian bread and caviar sticks. Ribs can also be made. Sandwich dough pieces are rolled out and hammered in. Specifications: - with pull-out tape - has manual, infinitely variable roller adjustment - Synchronous gear prevents jamming, shrinking or tearing of the dough sheet - Length for rolling out (working position) 2500mm - Connection: 400V, 16A-CEE plug Price on request.
used
Fritsch Rollfix 60 / 650 E sheeter Dough sheeter from Fritsch Model Rollfix with reel immediately available in the warehouse in Bielefeld. Pictures are without tapes, but the machine is sold with new tapes. -Bandwidth - with reel - with digital computer control
used
Plate shears Cutting capacity 1 mm Cutting width 1.10 m Foot operation, the cross step is missing.
used
guillotine shears AG TS 2 Working thickness 2mm Adjustable stop Hold Length 1.80 m Width 1 m Height 1.40 m Weight 300 kg
used
Nominal force: 2500 tons Slider stroke: 600 mm Slide strokes per min: 11 Distance between table and slider: 1500 mm Capacity of the main drive: 220 kW Table size: 2000x4500 mm Machine dimensions: 5910x8700x10355
used
Used sheeter FRITSCH, type: Rollfix 60 / 650 E -in bakery condition- - for the production of thin dough sheets - Digital control (no damage) - on wheels - Roll spacing: 0.3 - 45 mm - Strap width: 650 mm - Roll-up speed: 93.3 cm/sec. - Connected load: 1.4 kW - Condition: Good, ready for immediate use Inspection and test run are possible by arrangement.
used
WALTER WD 250/350 30 and 37 kW shaft multisaw – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 5000 kg -Weight: 31 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 55 mm -Load capacity: 9000 kg -Number: 2x terminals available -Price: per piece -Weight: 28 kg/piece
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 4500 kg -Weight: 31 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 9000 kg -Weight: 32 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece -Weight: 28 kg/piece
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 5 to 37 mm -Load capacity: 6000 kg -Weight: 22 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 60 mm -Load capacity: 3000 kg -Number: 8x terminals available -Price: per piece -Weight: 16 kg/piece
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 0 to 40 mm -Load capacity: 9000 kg -Number: 2x terminals available -Price: per piece -Weight: 28 kg
used
Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 3 to 24 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 14 kg/piece
used
Sheet metal gripper, curve clamping gripper DE-STA-CO 84A32-20100 Max 8 bar New ! Dimensions: 180 x 75 x 65 mm
used
Sheet metal gripper, curve clamping gripper DE-STA-CO 84A32-20300 Max 8 bar New ! Dimensions: 180 x 75 x 75 mm
used
Sheet centering pull-down unit GENUSTECH PM4I2V395MEMB50C-287 Flange diameter: Ø 56 / 72 mm sensor unit: SENSTRONIC A1202R6K700111 10 - 55 V DC approx. 0.2 m connection cable New ! Dimensions: 210 x 80 x 90 mm
used
Sheet metal centering pull-down unit GENUSTECH PM4I2V395067T45C-052 Flange diameter: Ø 56 / 64 mm sensor unit: SENSTRONIC A1202R6K250111C 10 - 55 V DC approx. 0.2 m connection cable New ! Dimensions: 210 x 80 x 90 mm
used
Sheet metal gripper, sheet metal clamp TAKRAF K4MP 4000 kg gripping range: 0 - 32 mm used, tested ! Dimensions: 460 x 200 x 90 mm Weight: 14.5 kg
used
Sheet metal clamp, sheet metal gripper TAKRAF KBH 3 ( KBH3 ) 3200 kg Gripping width: 12 / 70 mm used, tested ! Dimensions: 470 x 230 x 100 mm
used
Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF KR 1 ( KR1 ) Load capacity: 1 t ( 1000 kg ) Gripping range: 0 - 20 mm used, tested ! Dimensions: 530 x 180 x 170 mm
used
Sheet metal gripper, sheet metal clamp PAGUS 2000 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 330 x 190 x 100 mm Weight: 10 kg
used
Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF K 4 ( K4 ) Load capacity: 4 t ( 4000 kg ) Gripping range: 25 - 51 mm used, tested ! Dimensions: 480 x 110 x 215 mm
used
Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF K 4 ( K4 ) Load capacity: 4 t ( 4000 kg ) Gripping range: 0 - 32 mm used, tested ! Dimensions: 450 x 100 x 260 mm
used
Sheet metal gripper, sheet metal clamp PAGUS 3000 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 400 x 190 x 120 mm Weight: 14 kg
used
Sheet metal clamp, sheet metal gripper PAGUS KBH 1 ( KBH1 ) 1000 kg Gripping width: 10 / 25 mm used, tested ! Dimensions: 300 x 220 x 130 mm Weight: 5 kg
used
Sheet metal gripper, sheet metal clamp TAKRAF MLK 4000 kg Gripping range: 25 - 51 mm used, tested ! Dimensions: 560 x 200 x 110 mm Weight: 18 kg
used
Sheet metal clamp, sheet metal gripper TAKRAF 1600 kg Gripping range: 0 - 30 mm used, tested ! Dimensions: 330 x 300 x 75 mm Weight: 13 kg
used
Sheet metal clamp, sheet metal gripper TAKRAF KBH 1600 kg Gripping range: 0 - 32 mm used, tested ! Dimensions: 380 x 260 x 140 mm Weight: 10 kg
used
Sheet metal clamp, sheet metal gripper TAKRAF KBH 1 ( KBH1 ) 1000 kg Gripping width: 40 mm used, tested ! Dimensions: 220 x 190 x 130 mm Weight: 6 kg
used
Sheet metal clamp, sheet metal gripper TAKRAF Gripping width: 25 / 100 mm used, tested ! Dimensions: 370 x 320 x 190 mm
used
Sheet metal clamp, sheet metal gripper TAKRAF KBH 2 ( KBH2 ) 2000 kg Gripping range: 0 - 50 mm used, tested ! Dimensions: 230 x 220 x 150 mm Weight: 10 kg
used
hydraulic sheet metal gripper, sheet metal gripper, sheet metal clamp PAGUS K008-00:00/01 gripping jaw width: 120 mm usable jaw height: 10 mm opening width: max. 10 mm hydraulic cylinder: ORSTA C1-32/14x40 TGL 10906 New Dimensions: 370 x 185 x 250 mm
used
Sheet metal clamp, sheet metal gripper, lifting clamp TAKRAF KSR 4 ( KSR4 ) Load capacity: 4 t ( 4000 kg ) Gripping range: 3 - 30 mm used, tested ! Dimensions: 470 x 150 x 225 mm
used
used sheeting machine Seewer Rondo SSO 68 C, station wagon, checked, machine no. B5A088003
used
Items Steel sheets PAGUS ca. 1980 x 1500 x 15 mm ca. 1960 x 1500 x 20 mm approx. 1700 x 1520 x 30 mm approx. 2100 x 1200 x 20 mm weight: approx. 1800 kg used, tested ! Dimensions: 2100 x 1600 x 400 mm
used
Blechtafel Invar 840 x 430 mm Material thickness: 1 mm Material: Invar®® 36 ( Alloy 36, 1.3912 ) Weight: approx. 2.96 kg Illustration as an example photo ! New ! Dimensions: 840 x 430 x 1 mm
used
Blechtafel Invar 1000 x 600 mm Material thickness: 1 mm Material: Invar®® 36 ( Alloy 36, 1.3912 ) Weight: approx. 4.91 kg Illustration as an example photo ! New ! Dimensions: 1000 x 600 x 1 mm