shear used for sale

sheet width - max.: 300 mm plate thickness: 8 mm flat steel: 80 x 10 mm blade length: 300 mm machine length: 860 mm machine height: 565 mm weight of the machine ca.: 172 kg Long measuring shear Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 80,0 t punching cross-cut in cmm: 31,0 in 25 mm shear: flat material: 500x18 / 300x22 mm L-beam: 150 x 12 mm round bar steel: 50 + 25 mm square edge steel: 50 + 30 mm throat: 510 mm blade length: 500 mm work height max.: ca. 1.100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Board cutter - board shear Make Robust Model 1400 Year 1980's Cutting length 140 cm Details Iron cast table 100 cm, front lay+small cut device, back lay Available Direct

A rotational shear viscometer according to Mooney for performing Viscosity tests (ML / MS 1+X), Stress Relaxation testing, Mooney Scorch, Delta Mooney testing on polymers as well as rubber compounds for quality control, research and development applications.

Key data: 60

Extrusion line for the manufacture of 100 mm forest protector composed of: - Extruder 1 spindle, brand: Flag, 60 mm 25 L / D, motor: 30 hp. With variable speed drive and electrical panel. With charger on single-phase hopper. - Stainless steel cooling bath: 4 m. With 2 vacuum pumps: 4 Kw (5.5 hp) each. - Drag trolley: 2100x190 mm - Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.

Key data: 60

Extrusion line for the manufacture of forest protector 90 mm composed of: - Extruder 1 spindle brand: Flag, 60 mm Ø 25 L/D, motor: 37 Kw (50 hp). With variable speed drive, electrical panel and stainless hopper with master dispenser. - Stainless steel cooling tub: 2 m with 2 vacuum pumps: 4 Kw (5.5 hp) each. - Towing trolley: 1300x130 mm, brand: Cincinati Milacron, engine: 5.5 Kw. - Die-cutting machine and shear with hydraulic group: 4 Kw (5.5 hp), tank: 75 liters.

Key data: 60

Extrusion line for the manufacture of forest protector 80 mm, composed of: -Extruder 1 spindle brand: Covex, 60 mm Ø 25 L/D, motor: 22 Kw (30 hp). With variable speed drive and electrical panel. - Stainless steel cooling tub: 2 m. With vacuum pump: 11 Kw (15 hp). - Towing trolley: 1100x220 mm, motor: 2.2 Kw (3 hp). -Die cutter and shear with hydraulic group: 4 Kw (5.5 hp). Tank: 75 litres.

FIMI cut-to-length line for stainless steel 1500x3mm x25t (A3776) FIMI cut-to-length line for stainless steel 1500x3mm x25t (A3776) is perfect solution for stainless steel metal processing. Line is pretty new and very good conditions. It has all important parts for working. All components made by FIMI. FIMI -is top quality coil metal processing machinery manufacturer Manufacturer: FIMI Year: 2004 (2018 was installed new controller box and plc new) Working length: 1500mm Minimum metal thickness: 0.4-0.5mm Maximum metal thickness: 3mm Maximum coil weight: 25t Supply scope: -coil car -decoiler -entrance feeder -entrance shear -levelling machine -wrapping part -guillotine -conveyor -stacker

plate thickness: 8,0 mm ST plate thickness: 5,0 mm VA table-size: 1000 x 950 mm blade length: 200 x 200 mm strokes per minute: 60 H/min adjustable: Winkel 30°-140° mm work height max.: ca. 950 mm oil volume: 60 l engine output: 4,0 kW weight of the machine ca.: 1200 kg range L-W-H: 1000 x 1120 x 1700 mm from a maintenance workshop New price at the time ~ 21.000 euros Furnishing: - Robust electro-hydraulic notching machine - with adjustable angle, electro-hydraulic adjustment - Adjustment by hand wheels (left + right knife segment) - hardened knives also for cutting stainless steel - front panel - electro-hydraulic knife clamping - Inching mode for setting the shear blades selectable (manual mode) - planed table surface, with T-slots to avoid tilting or slipping of the metal sheet - 2x staking stops with movable and interchangeable stop bars - 2x blank holders - 1x free moving foots ...

Equipment consists out of: 1 - Three decoilers 2 - Sheetholder with three levels 3 - Fasti straightening unit 4 - Fasti shear Transversal cut to length line / Querteilanlage / installation de coupe en longueur

Board cutter - board shear Make Schimanek Model 10-110 Year 1980's Cutting length 110 cm Details Iron cast table 72 cm, front lay+small cut device, back lay

Laboratory granulator, plastic shredder, shredder C. f. SCHEER & CIE SGS 25-E4 Working width: 25 mm Drive power: 0.12 kW ( feed motor ), 0.75 kW ( knife motor ) Number of teeth ( shear blade ): 12 used, tested ! Dimensions: 520 x 490 x 425 mm

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without damage -Hermetically sealed for moisture-sensitive liquids -Excellent for abrasive liquids with low to medium viscosity and materials sensitive to shear forces -Max. Pressure: 6 bar -Connection: 1 inch -Output: 114 l/m -Max. Pressure: 18 bar -Dimensions: 360/270/H330 mm -Weight: 26 kg

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Timing belt wheel with safety hub PAGUS profile: L Teeth: 18 pitch: 9,525 mm diameter: Ø 54 mm belt width: 52 mm safety hub for shaft diameter: Ø 22 mm shaft length: 72 mm groove width: 6 mm including 20 shear pins and bushings New ! Dimensions: 60 x 60 x 72 mm

Timing belt wheel with safety hub PAGUS profile: L Teeth: 18 pitch: 9,525 mm diameter: Ø 54 mm belt width: 52 mm safety hub for shaft diameter: Ø 22 mm shaft length: 72 mm groove width: 6 mm including 15 shear pins and bushings used, tested ! Dimensions: 60 x 60 x 72 mm

Suitable for fully automatic grinding of all known tooth geometries (e.g. flat, alternating, trapezoidal tooth) from HM – circular saw blades on the face and back in one clamping. The free programming also allows the Machining of special tooth shapes. Accesories: Pallet loader with 3 stations,, Coolant system with total enclosure,, Integrated hollow tooth grinding device,, Software package W 1 alternate tooth,, Software package W 2 flat tooth,, Software package W 3 flat/trapezoidal tooth (with tooth height difference),, Software package W 4 flat / roof tooth (with tooth height difference),, Software package W 5 trapezoidal tooth,, Software package W 6 pointed on one side,, Software package W 7 tooth face processing,,, Software package W 8 free programming of special tooth forms,, automatic tool positioning axis, Automatic D-axis for machining chip breaker grooves, auto. fire extinguish ...

Powder dispersing plant (powder mixer) Manafacturer: Frystam Shear Pump: Type: FSPE 3532 D No.: 0574460006 Power: 11-22 kW Centrifugal pump: Type: FZ 20 A Power: 7.5-11 kW complete system on a mobile frame with integrated hopper(diameter: 690 mm); Capacity: approx. 65 l with inlet and outlet with sight glass with control cabinet in EEx protection Condition as good as new, rarely in operation LWH: 1350 x 900 x 1050 mm Weight: approx. 350 kg

sheet width: 1250 mm plate thickness: 3,0 mm distance between columns: mm power requirement: 2,2 kW dimensions: 3,27 x 1,69 x 1,29 m weight of the machine ca.: 1,6 t used compact mech. guillotine shear - strokes per minute: 50 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ASHE 520 mm Turret Rewinder from 2020 Equipped with slitting unit Glueless turret rewinding Tail closing unit Working width: 520 mm Rotary shear slitting Has his own unwinder Stand-alone machine Can run also with printing press Core dispenser Available immediately

sheet width: 2500 mm plate thickness: 6,35 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 4,20 t dimensions of the machine ca.: m Controlled backgauge up to 1000 mm Side stop and table extensions Shear angle adjustment Cutting gap adjustment Cutting length limitation Cutting edge lighting Knife sharpened The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Code: 0806 Brand: HIRZT - ITALY Model: B 300 - CE Standard Automatic edge bander for pre-glued edges in strips or rolls: melamine, plastic laminates, veneer, etc . up to 3 mm thickness - CE Standard Composition: Motor V. 220 single-phase Pneumatic end cutting unit (shear) front and rear Blower with air filter - Power 440 W Trimming copying unit with adjustment from the outside - Motors 220 x 2 W - Trimmer speed rpm 10000 End cutting finishing unit with foot control N° 20 rollers inclined on the plane Feed motor 13 wheels V.200 single-phase - Speed 4,7 mt/min Max edge thickness mm 3 Panel thickness min/max 10/50 mm Min panel dimensions mm 70 x 140 Total absorption Kw 3,8 Digital thermometer 10-350 degrees Extensible front support Overall dimensions mm 1800 x 700 x 1300 h Weight kg 250

FINN POWER PRIMA POWER EBe system Year 2011 4kw All-electric machine tower warehouse 10 levels punching machine with electric shear Loading and unloading robots Electric panel bender 2200 height 205 Available April 2024

Specifications Type: KBLH 700 Dimensions (LxWxH): 1850 x 680 x 2050 mm Working height: 700 mm Cutting length: 510 mm Knife length: 520 mm Max. shear cross-section: 3500 mm Stroke of the scissors, infinitely variable: 0 – 45 Max. stroke number of scissors: 11 PMG knife for: L-steel 90°+45°/ T-steel 90° Required power : 8.5 kW Weight approx.: 2950kg

Laboratory bead mill Manufacturer: Bachofen AG Type: KDL No.: 920235 Power: 1.85 kW in explosion protection shear tools in ceramic very good condition with various tools and spare parts LBH mill: 650 x 650 x 520 mm LBH box: 600 x 400 x 430 mm

Brand: Davis-standard, width: 1,400 mm, thicknesses: between 0.5 and 8 mm, year: 1999. Composed of: - Extruder 1 spindle brand: Davis-standard, 90 Ø diam, 32 L/D, engine: 250 hp, hydraulic filter degasser and changer and continuous flow gear pump. - Co-extruder 1 spindle brand: Davis-Standardar, 60 Ø diam, 32 L/D, engine: 60 hp, degasser, hydraulic filter changer - Co-extruder 1 spindle brand: Davis-Standardar, 60 Ø diam, 32 L/D, engine: 60 hp, degasser, hydraulic filter changer - Sheet extrusion head brand: IDE, width: 1,400 mm, thicknesses: 0.5 to 8 mm, up to 5 layers. - Calender, width: 1,500 mm, roller diameter: 460 mm. - Stretch and cooling table: 1500 mm. - Cutting shear.

ROTOCONTROL RSH 440 ECOLINE  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm mandrels

Oto Mills 127x5mm HF tube mill Make: Oto Mills (Italy) Year New: 1999 Tube Diameter: 38mm – 127mm Wall Thickness: 0.9mm – 5mm Speed: 100 meters per minute Direction: Right to Left Tooling: Round, Square, Rectangular Entry Coil Car Shear & End Welder Driven Pinch Rolls Coil Straightening Machine Pit Type Accumulator Forming Mill 250Kw Emedi High Frequency Welder 2-Roll Adjustable Welding Box Cooling Section Sizing Mill Four (4) Adjustable Turk Heads Cut – Off Type: Flying Saw Driven Exit & End Tables Electrics, Hydraulics, Controls, Lots of Tooling, Drawings & Manuals, Spare Parts Line is still installed but not operational. Possible to inspect

Silverson MP45 Mayonnaise plant Serial: MP45107 2013 but fully overhauled by PPML in 2021, stainless, mayonnaise and sauce plant, Silverson sauce plant is designed for small to medium pilot scale production of sauce, the unit is designed to carry out the entire process, including rapid preparation of pre-mixes, hydration of thickening and stabilising agents and preparation of the final oil in water emulsion, HMI touch screen controls with programmable settings, Silverson high shear in line mixer model 450LS, 7.5Kw motor, with manuals / drawings, mobile, 3Ph

ABG OMEGA 510 Converter  Manufacturer: ABG  Machine type: Omega 510 Converter  Type: Blanco labelling machine  Year of construction: 2010  Working width: 520 mm  Number of punching stations: 2  Equipment:  Unwinding - 76 mm  Splicing table  Side edge control  Grid take-off and matrix rewinder/grid rewinder  Label converter/label shifter for 110x75 mm format (not ABG)  Slitting station with 4 shear blades  2 separate rewinding axes  Tools: o Magnetic cylinder 134 Z or 16.75" o Magnetic cylinder 161 Z or 20.125"

ABG B5010 / Booklet machine  Configuration of the machine:  Unwinder  New feeder system  Lamination in register  Punching station  Matrix rewinder with silencer  Rotating shear blades  WebAdvance on the rewinder  This machine has been completely upgraded in terms of control technology, i.e. new drives, new HMI and new software, so that it meets today's standards from a control technology point of view.  It also has the latest version of the feeder.  The original delivery date was LabelExpo 2013, but with the full upgrade it is now state of the art.

Accelerometer KISTLER Type 8704B50M1 K-Shear® measuring range: ± 50 g sensitivity: 101,1 mV/g sensitivity: 0.7% natural frequency: 54.0 kHz temperature range: -54 - +100 °C New ! Dimensions ( accelerometer ): 25 x 14 x 13 mm Dimensions ( Packaging ): 120 x 60 x 30 mm

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

hydraulic scissors, hydraulic cylinders for scissors / spreader, hydraulic rescue kit, rescue scissors, rescue spreader -Manufacturer: Lancier, basic unit hydraulic shear / spreader -Type: HHC 230-F -Nominal pressure: 720 bar -Dimensions: 1050/260 / H210 mm -Weight: 13.4 kg

Table shear cutting knife, replacement knife for table shears, replacement cutting, cutting knife, scissor knife, tape cutting device -Manufacturer: Schleicher, cutting device from conveyor system WV-SYS 160-1050 -Cutting width: max. 900 mm -Dimensions: 1400/165 / H785 mm -Total weight: 300 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Die cuts: as shown in the pictures -Manufacturer: SUPRA, type PA8150 with base plate -Punching tool: Ø 4 mm -Dimensions: 275/200/H180 mm -Weight: 21.4 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Handover: in the current condition as seen -Punching frame: as shown in the pictures -Manufacturer: CEWE -Type: PW 8-150 -Projection: 150 mm -Dimensions: 310/100/H215 mm -Weight: 9.1 kg

Punching units, punching unit, punching bracket, punching tool, non-driven latch and shear units, forming bracket -Number: 31x punching bracket as shown in the pictures -Price for: all 31 pieces -Manufacturer: CEWE JOKA Raskin -different types -Dimensions: 300/80/H220 mm -Weight: 13 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Manufacturer: SUPRA -Transfer: in the current condition as seen -Price: per piece -Number: 2 pieces -Dimensions: 237/35/H140 mm -Weight: 3.9 kg

Pneumatic double diaphragm pump -Fast venting and immediate suction of the medium -Dry running without: damage -Hermetically sealed for: moisture-sensitive liquids -Excellent for: abrasive liquids with low to medium viscosity and materials sensitive to shear forces: -Air max. Pressure: bar -Air connection: 1 inch -Water output: l/min -Water max. Pressure: bar -Connection: B coupling -Dimensions: 480/400/H530 mm -Weight: 32 kg

One used flexible welding line EVG GH400 for the production of standard and special truss girders (e.g. shear reinforcement girders or decking girders) in mid-size to small series

Qty. 1 Second-hand extrusion press line Mfc.: SMS Schloeman, Junker, Allen Bradley Type: Direct press Built: 1987 Force: 2800 MT Billet dia.: 228 mm – 9” Length: 250-1000 mm Consist of: Logs Loading Table Logs Furnace Hot Shear Induction Heater Extrusion Press Pullers (2) Quenching Unit Hot Saw Run-out Table Stretcher Finishing Saw Aging Oven

sheet width: 1050 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,40 t dimensions of the machine ca.: m Motorized back gauge up to 1000 mm with fine adjustment via handwheel Shear angle adjustment Knife sharpened operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2100 mm plate thickness: 6 mm rear stop: 1000 mm cutting angle: 1,2 ° down holder: 11 Stk no. of strokes: 28 Hub/min oil volume: 150 l total power requirement: 11 kW dimensions of the machine ca.: 3010 x 2100 x 1640 mm weight: 4500 kg Available from stock -------------------------------------------------- --------- electrical / hydraulic CNC swing cutting shear with CYBELEC CNC touch screen control with electric / hydr. Cutting gap adjustment -------------------------------------------------- --------- Furnishing: - CNC electrical / hydraulic swing cutting shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Number of pieces Cutting length limitation Material selection, including sheet thickness Cutting line lighting - motorized back gauge, travel = 1,000 mm (X axis) on ball screws automatic Can be  ...

Slitting Line Cesar 8 Slitting line / Cut to length line with winder unloading arm, strip separator and strip ejector. Cut : longitudinal/longitudinal Width _Useful Coil: 350 mm. Maximum thickness: 2 mm. Minimum thickness: 0.20 mm. Unwinder reel capacity: 2500 kg. Internal Coil Diameter: from 300 to 500 Max Coil Outer Diameter: 1000 Shear shaft diameter: 80 mm. Line Direction: Right to Left no. 02 complete sets of knives (rotary slitter blades): 1 series (10 knives each type - mm. 3/3.5/4/5/6/8/10 + spacers + rubbers 2 series (16 knives per type - mm. 2.80/2.85/2.90/2.95/2.5/3/3.5/4/4.5/5/6/8/10 + hardened spacers with hardfacing + normal spacers + rebate spacers + hardened and non-hardened spacers for winder reel. Possibly transferable with combined 500 kg demag jib crane + Columbia pneumatic riveter

Korean made trapeze line 3 form sliding cassette system ( 27/200-30/151-18/838 ) cassette change in 5 minutes 3 types of cases are available 27/200 - 38/151 - 18/838 change takes only 5 minutes the cassette roller is all chrome 15 ton hydraulic uncoiler rollformer line flying shear Stacking unit is a fully automatic machine

The line avaible to sell is used but in very good conditions. It is equipped with: n.1 Decoiler 1250mm x5 ton n.1 Roll-forming machine with n. 12 passes- useful width 1000 mm n.1 Set of Forming rolls assembled to produce corrugated profile 75x18 mm n.1 Flying shear with guillottine blades (pneumatically operated) n.1 Electrical system with programmable device n.1 Tank for compressed air (without compressor)

Maker: Muhong Material Width: 500mm - 20000mm Material Thickness: 8mm - 20mm Coil Weight: 35 ton Coil ID: 410mm - 650mm Coil OD: 1800mm Direction: Right to Left Entry Coil Car Hydraulic Lift and Traverse V-Type Floor Standing Design Double Mandrel Uncoiler Powered Hold Down Roll Sliding Base Pneumatic Brake Sliding Base Feed Up Motor Drive Hydraulic Peeler Driven Pinch Rolls 5-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 300mm Motor: 132Kw DC Drive Driven Exit Conveyor 9-Rolls Straightener Adjustable Work Rolls Work Rolls Diameter: 230mm Motor: 200Kw DC Drive Driven Exit Conveyor Hydraulic Shear Entry Entry Pinch Rolls Self Contained Hydraulics Exit Driven Conveyor Drop Type Stacking System Electrics, Hydraulics, Controls

sheet width: 3050 mm plate thickness: 5 mm distance between columns: - mm table height: 750 mm strokes per minute until: 25 - 80 cutting angle: 1° 10´ Number of downholders: 16 total power requirement: 11 kW weight of the machine ca.: 4,9 t dimensions of the machine ca.: 3,4 x 2,6 x 1,4 m Electric 380 Volt: Back gauge motorized: 750 mm Squaring arm withh mm-scale: Support arms: 2 x Shadow line lighting: Cutting lenght bound: Foot switch: Hydraulic guillotine shear in a solid all-welded construction with cutting output of 3050 x 5 mm and motorized backgauge adjustable from the front and readable via counter.The cutting performance refers to sheets with a strength of max. 45 kg/mm². Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Horizontal fully automatic machine for 3-edge and 4-edge sealed pouches for filling and packaging powdery products in double pouch operation (with perforation): • Format range double bags (W x H) min. (2x50) x 260 mm, max. (2x80) x 260 mm • Output max. 100 double bags/min (depending on bag size) • Screw dosing SD 70/2 for double bags • Main dosing min. / max. 2.5 - 90 g per bag • Micro-dosing min. / max. 0.3 - 5 g • Max. Roll diam. 600 mm • Core diam. 76 mm • Max. Roll width 520 mm • Gluing table with splice detection • 2 pcs. Thermal transfer printer Allen Coding 5 line cliché, individually switchable • Longitudinal and cross seam hot sealing tool, head seam hot sealing tool • Sealing stations manually adjustable • Print mark control • Tear aid with a needle • Bag inflator • Bag opening control • Filling nozzle • Trickle protection by sheet shear  ...