shear plate cutting used for sale

Working hours laser on: 50921 h Working hours beam on: 21717 h Laser power: 3200 Watt Working range laser: 4000 x 2000 x 115 mm Max. steel: 20 mm Max. stainless steel: 12 mm Max. aluminium: 8 mm Length: 11600 mm Width: 5300 mm Height: 2200 mm Machine weight: 16000 kg Electrical connected load: 73 kVA

Working hours machine: 23304 h Working hours laser on: 22804 h Working hours beam on: 10185 h Laser power: 4400 Watt Working range laser: 3000 x 1500 mm Max. steel: 25 mm Max. stainless steel: 20 mm Max. aluminium: 12 mm Length: 12800 mm Width: 6300 mm Height: 2400 mm Machine weight: 15000 kg Electrical connected load: 51 kVA

Messer MultiTherm 4000Year of manuf. : 2020 ____________Description:Technical specificationsWorking surface:2000 mm x 15000 mmTotal width:5070 mmHeight:1980 mmequipment:-Global Control S with 15 colour touchscreen:-Joystick and handwheel for Global Control S panel:-Cooling for the control cabinet:-Laser diode:-Drives up to a maximum of 35 m/min. AC:-Heat shield without air cooling:-Runway for double-sided longitudinal drive HEB:-OmniFlow oxyfuel supply up to 70 m/h (gas flow control):-ALFA machine cutting torch (internal ignition):-Smartlifter 300:-SensoMat ARKI:-Full addressing of gases:-Light barriers:-Safety device for wheel housing (foot switch)

Inv. Num. : 9116 Type: PARAGON CUTTER Producer: GERBER Created: 2022 Parameters: Load capacity: 100 kg Max. material width: 2200 mm Top table length: 16800 mm Equipment: GERBER XLs125 SPREADER

A CNC water cutting system Knuth is available. Cutting dimensions X/Y: 6000mm/2000mm, travel path Z: 250mm, max table load: 600kg/m², max feed rate: 16m/min, positioning accuracy at 500mm: +/-0.05mm, repeatability at 500mm: +/-0.05mm, max operating pressure: 4000bar, total power requirement: 40kW. Machine dimensions X/Y/Z: approx. 6350mm/3250mm/4000mm, weight: approx. 4000kg. Documentation available. An on site inspection is possible.

Reference Num.: 4433 Brand: Polar Type: 78 ES Construction year: 1999 Available: 10.06.2026 Status: Not in production Location: Deutschland Cutting Size: 780 mm Electrical Power Input: 2 KW Feeding depth: 780 mm Feeding height max.: 120 mm Machine size: Length: 1,915 mm, Width: 1,550 mm, Height: 1,450 mm Total weight: kg 1,300 / lbs 2,866 Table height: 900 mm Equipment: - Lichtschranke - Programm - Lufttisch

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Auction-ID: A1-46354-24

Condition: unchecked Item is sold as is Weight may be ggbfs. Deviate. Machine must be dismantled by the buyer and transported out of the hall area. It cannot be guaranteed that a forklift is on site. Auction-ID: A1-46354-41

sanding machine designed for smoothing and refining cutting boards used in the cutting process. Auction-ID: A7-46462-23

A paper core cutting machine Sternberg & Phillips with parallel winding capability is available. Winding units: 1, max. core width: 1750mm. An on-site inspection is possible.

Attec Food Technology fully automatic pig cutting line consisting of: steel hanging line, dimensions: 6500 mm x 400 mm x 1700, Attec automatic primal cutting line, type: AGOL-850, order number: ON17163, year of construction: 2015, 400 V, 3 Ph, 50 Hz, 45 kW, capacity: 800 pigs/hr, product: pork carcasses, left & right, s/s outfeed belt for waste pork legs, belt width: 290 mm, automatic measuring system for precise and individual cuts of individual pork carcass, plastic belt, belt width: 800 mm, 1300 mm, 500 mm, 300 mm, 100 mm and s/s protection fence, total dimensions: 9800 mm x 4200 mm x 2200 mm. Line is never used.

Rondo cutting table, model: ZGM635.A, machine number: D66011989, year of construction: 2016, working width: 640 mm, total dimensions: 3700 mm x 1000 mm x 1900 mm.

Bysprint Fiber 4020 4 KW - Hours: 72,000 - Cutting hours: 20,000 - Last maintenance: 12/19/2025 - All modules in order - Cutting head in order, General overhaul 2024 - Annual scheduled maintenance always carried out by Bystronic

Working width: 1100 mm Number of discs: 2 Auction-ID: A3-43524-1366

Type: Circular saw for metal profiles Electrical supply: 380V 50 Hz Motor power: 2.2 †4 kW Auction-ID: A7-46477-15

Type: Stone cutting machine Blade: Diamond disc Cooling: Water cooling Electrical supply: 380V 3F 50 Hz Current: 20 A Auction-ID: A7-46477-11

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-263

A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible.

CNC Portal Plasma Cutting Machine Manufacturer: Eckert Type: Jantar 2 Year of Make: 2011 CNC control Working area: 2x4 m 1 plasma torch with power source Kjellberg HiFocus 161i Automatic gas console Extraction table

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

Frame for transporting panel blanks in the CNC production area, loaded on the left and right on a Euro pallet Auction-ID: A1-46501-117

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-201

PTO driven, three-point device, auger Ø380mm, Complete with potato/beet cutting knife. Auction-ID: A1-40137-93

AGP New old diamond drilling machine with water cooling, guide M14 and 1/2\" intake. This set includes water barrel, PRCD, guide. New old Baier BDN 1700 watt professional slot saw Auction-ID: A1-40418-167

BYSTRONIC BySpeed 3015 laser cutting machine was built in 2005 in Switzerland by Bystronic Laser AG. The machine on offer has been regularly maintained throughout its service life and is in very good technical condition. BYSTRONIC BySpeed 3015 is an excellent solution for precise cutting of a wide range of materials, i.e. stainless steel or aluminum. Thanks to the use of a number of well-proven solutions, the machine is perfect for both unit and series production. Workpieces with a maximum length of 3000 mm and a width of 1500 mm are machined by a high-quality laser beam with a power of 4.4 kW. The beam is generated by a reliable source with the highest energy efficiency. The cutting head with a powerful drive, in turn, provides very dynamic operation and a feed rate of up to 169 m/min. All this is complemented by a robust design that maintains the highest stability during even the mo ...

Equipment: Cutting unit with reel Knife bar (cutting system) Feed auger Side dividers left/right Hydraulic reel adjustment Transport trolley (1-axle) Trailing drawbar Holder for combine harvester Technology: Working width estimated approx. 6.0 – 7.5 m Uniform crop flow via feed auger Classic grain header system Mechanical/hydraulically operated Used Auction-ID: A7-46606-1031

Technical details Type: Abrasive cutting and grinding discs (mixed lot) Configuration: Assorted discs stored in cabinet (boxed and loose) Disc types: - Cutting discs (thin) - Grinding discs (thicker) Sizes: - Ø 230 mm (majority) - Some Ø 180 mm Specifications (examples): - 230 × 6.0 × 22.23 mm (grinding) - 230 × 4.0 × 22.2 mm (cutting) Brands: Rhodius, Lukas (Primeflex), Bosch Professional, Carborundum Electrite Material compatibility: Steel and stainless steel Quantity: Approx. 120–200 discs (boxed and loose) Packaging: Partial boxes and loose stacks Application: Cutting, grinding, and finishing operations using angle grinders Condition: Mixed (new old stock and used/open units) Dimensions and weight (approx.) Length: 600 mm Width: 500 mm Height: 1800 mm Weight: 120 kg Auction-ID: A7-46498-224

Technical details Manufacturer: REMS (Germany) Type: Manual pipe thread cutting die stock Operation: Ratchet type Thread size: R 1 1/4\" (approx. 1¼ inch) Thread standard: Likely BSPT (R thread) Marking: REMS / No. 43 Application: External threading of pipes Use case: Plumbing, industrial pipework, workshop maintenance Equipment - Ratchet lever - Die head / die stock - Thread size marking R 1 1/4\" Auction-ID: A7-46498-98

Technical details Type: Vertical slotting machine (bench-mounted) Configuration: Mechanical slotter with reciprocating ram Drive: Belt-driven crank mechanism (top-mounted) Operation: Manual feed with mechanical stroke system Stroke system: Crank-driven vertical ram movement Tool holder: Vertical tool clamping system Work table: Fixed T-slot table for part mounting Controls: Basic electrical ON/OFF switch (older control box) Construction: Cast iron frame with pedestal base Application: Keyway cutting, internal slotting, and small shaping operations Build period: Approx. 1960s–1980s Condition: Used, with wear and aging electrical components; functionality untested Dimensions and weight (approx.) Length: 700 mm Width: 600 mm Height: 1200 mm Weight: 180 kg Auction-ID: A7-46498-212

Hartner Multi-Step Drills Precision reimagined. Efficiency made tangible. Made in Germany. The multi-step drills are the intelligent further development of classic HSS and HSS-E twist drills. Thanks to their innovative step-drill geometry, the drills deliver significantly higher performance, greater precision, and noticeably improved drilling comfort in daily use. What makes the multi-step drill so special? Unlike conventional HSS drills that machine material in a single cutting action, the multi-step drill works in several defined cutting stages. The result is smooth, low-vibration operation with significantly lower force requirements. Additional advantages include optimal chip removal, perfectly round and precise holes, and almost burr-free hole exits. Even when used with hand drills and cordless drills, the special geometry enables controlled drilling without jamming or slipping in t ...

With the Kibani Plasma Cutter 2-in-1, you can take your metalworking projects to the next level! This powerful device combines plasma cutting and MMA welding in one machine, making it perfect for professional craftsmen and enthusiastic DIYers alike. With versatile features and reliable performance, you can effortlessly machine and repair a variety of metal types. Realistic performance for every project With a maximum cutting power of 12 mm, this device delivers excellent results in a variety of jobs. The working range of 20–40A (CUT) and 30–120A (MMA) ensures that you always have the right settings, whether you're doing fine cutting or heavy welding. Thanks to its stable operation and protection against voltage fluctuations, you can count on consistent performance. Durable and complete design The plasma cutter is designed with a robust body and a built-in automatic cooling system,  ...

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC130 Maximum cutting thickness: max. cutting thickness 45 mm Connection: 380 volts adjustable current: 30-120 A Start: Equipped with: Pilot Arc duty cycle: 60% duty cycle (120 A) Technology: IGBT Technology Protection: circuit breaker Additional function: Plug for CNC control Including: plasma torch, accessories and protective cover Not included: power cable and 380 volt plug Condition: Unused and in the original packaging

Compressed Air Plasma Cutting Machine Brand: Stahlfest Type: SFPC70 Maximum cutting thickness: max. cutting thickness 20 mm Connection: 380 volts adjustable current: 20A - 60A Start: scratch-start duty cycle: 60% duty cycle (60A) Technology: IGBT Technology Protection: circuit breaker Including: plasma torch, accessories and protective cover Not included: 380 volt plug Condition: Unused and in the original packaging