shear plate cutting used for sale

Ozamech hydraulic guillotine, bending length 3000mm Used machine efficient, sale due to liquidation of the company.

Hydraulic guillotine shear model Atlantic 3012 very good condition. - Year of manufacture - 1990. - Length of the cut sheet - 3000mm. - Max cutting thickness 12mm - The machine is equipped with an automatic bumper. - The machine has 1 set of spare original knives. - Weight 8000 kg.

Durma MS 3004 Guillotine Shear Machine is like new condition

Hydraulic panel shears - storage machine - incl. foot switch, touch screen, rear installation room with light barrier monitoring, automatic/electric cutting gap, automatic/electric cutting angle, hydraulic hold-down, mot. Backgauge up to 1000 mm depth -Illustrations similar- Hydraulic plate shear - storage machine - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-

Folding table at the rear 12mm aluminum / 8 steel thickness Sharpening knife CNC Backgauge Opening Stroke 190mm

Dener DMMH-NC/31-10 Guillotine Shear Cutting length : 3100 mm Maximum cutting thickness : 10 mm Machine is in good condition

Cutting length : 3100 mm Cutting thickness : 10 mm Machine is in good condition

Durma SBT 3006 CNC Guillotine Shear Cutting length : 3000 mm Maximum cutting thickness : 6 mm Pneumatic sheet support

Durma SBT 3010 CNC Guillotine Shear Machine is in very good condition

Durma VS 3020 CNC Guillotine Shear Maximum cutting thickness : 20 mm Cybelec control unit Stroke : 190 mm Number of cut per minute : 7-13 Machine is in good working condition

Punching force : 30 Ton Sharing Force : 25 Ton Machine is in excellent condition

Cutting length : 3000 mm Maximum cutting thickness : 6 mm Machine is in good condition Machine can be sold as set with press brake : https://www.makinaalsat/makinalar/172773/durmazlar-abkant-pres

Baykal HNL 3100x10 mm CNC Hydraulic Guillotine Shear Adjustable angle Cutting length: 3100 mm Maximum cutting thickness : 10 mm Machine is in good condition

Ermak CNC HVR 3100 x 10 CNC Guillotine Shear Machine is in very good condition

Durma SBT 3006 Hydraulic Guillotine Shear Cutting length : 3100 mm Cutting thickness : 6 mm Machine is in good condition

Durma CNC HGM 6013 Guillotine Shear Machine is in good condition Cutting length : 6000 mm

Durma DHGM 3016 NC Guillotine Shear Cutting length : 3100 mm Maximum cutting thickness : 16 mm

Durma AHGM 6016 NC Controlled Guillotine Shear Cutting length : 6000 mm Maximum cutting thickness : 16 mm New blades Machine is in working condition

Cutting length : 4100 mm Cutting thickness : 16 mm Number of cuts per minute : 5 Power : 30 Kw Machine is in good condition

Cutting thickness, mm - up to 8; Cutting length, mm - up to 4050; Cutting angle, mm - 1.5; Number of hydraulic clamps, pcs - 17; Cuts per minute (metal / stainless steel) - 13/20

Cutting length : 3000 mm Max. cutting thickness : 13 mm Machine is in good condition

Machine is in good condition but you need to order new Control Panel! Maximum cutting length : 3100 mm Maximum cutting thickness : 20 mm

Baykal MGH 3110 NC Guillotine Shear Number of cut per minute : 11 Motor power : 22

Baykal MGH 3100 x 16mm NC Guillotine Shear Cutting length : 3100 mm Maximum cutting thickness: 16 mm Number of cuts per minute: 8 Motor power : 30 Kw

Durma 6100 mm x 16 mm CNC Guillotine Shear Cutting length : 6100 mm Maximum thickness : 16 mm Machine is in good condition

I.MA.l CCOSI CNC shear in excellent condition. Used machine visible in Italy, sold as it is

stroke 340 mm stroke in a minute 6-10 /min lubrikant capacity 400 lt motor 30 kW

Cutting length : 6100 mm Max. cutting thickness : 16 mm All maintenance has been done recently Motorized table is included in the offer

: neu : ca. 12 Wochen ab Auftrags : 1280 mm : 16 mm : 12 mm : 8 1/min : 3 ° : 7 pcs. : 500 mm : 22.5 kW : 250 l : 950 mm : 2100 mm : 1400 mm : 2000 mm : 5000 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 170 to : 40x40x4 mm : 65x65x7 mm : 2 : 25/5 bzw- 18/7 mm : 350 to : 5 kW : 265 bar : 70 l Automatic line for punching and sharing angle STANDARD EQUIPMENT: INFEED/OUTFEED CONVEYERS idle rollers 3 conveyers each 3,3 m for feeding angles up to 12 m length WORKING UNITS: ROLLER FEED MEASURING SYSTEM feed by roller wheel (brushless moto),rotary encoder no time loss for measuring feeding speed variablefrom 0 to 36 m/min positioning accuracy in X axis0,25 mm + 0,15 mm per meter the last 250 mm can not be used PUNCHING UNIT (2X) 1 punching unit per leg 1 punch per punching unit adjustable back mark by tooling fromfrom 20-40 mm hydraulic downholder direct access for quick change ofpunches and dies SHEARING UNIT shearing power 350 kN single cut direct access for quick change ofshearing blade hydraulic downholder CNC CONTROL OMRON PLC colour touchscree ...

: neu : ca. 12 Wochen ab Auftrags : 1530 mm : 16 mm : 12 mm : 7 1/min : 3 ° : 8 pcs. : 500 mm : 22.5 kW : 250 l : 950 mm : 2350 mm : 1400 mm : 2000 mm : 5200 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 28 min. Punching force: 110 to : 40x20 mm flat steel: 600x15 oder 400x20 mm L-beam 90°: 160x160x16 mm L-beam 45°: 70x70x7 mm : 50 mm square edge steel: 50 mm : 13 mm throat: 300 mm Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

flat steel: 350 x 10 mm round bar steel: 35 mm square edge steel: 30 mm L-beam: 80x80x8 mm hole diameter in sheet thickness: Ø 27 in 13 bzw. Ø 20 in 8 mm : 500 kN throat: 177 mm : 34 (Hub 15mm) blade length: 356 mm engine output: 3.0 kW weight: 950 kg dimensions: 1300x1100x1850 mm Standard equipment: - Knife set for flat steel - Complete knife set for angle steel shears - Complete normal punching equipment - Quick release device for punches up to 31 mm - Support table for punching device, rectangular notching and flat steel shears - Bending stamp with matrices V 40 and V 70 - Electric contact stop (1.000 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 10 mm cutting angle: 2 ° down holder: 14 Stück no. of strokes: 13 Hub/min throat: 350 mm oil volume: 260 l total power requirement: 22 kW weight of the machine ca.: 10.550 kg dimensions of the machine ca.: 4000x2250x2050 mm Domestic equipments: - Hydraulic swing cut sheet metal shears - Touch screen controller with digital display for backgauge - automatic kerf adjustment via the control - Backgauge control 1000 mm travel with recirculating ball screws - Vibration cutting machine with kerf adjustment - 2 support arms - 1 side stop - Photocell behind the machine - Cutting length limit - cut line lighting - Chrome steel knife - Ball rolls in the table - hinged finger guard with limit switch - Footswitch - CE mark / Declaration of Conformity - Bed instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTe ...

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 5700 kg dimensions of the machine ca.: 4000x2100x1640 mm Accessories / equipment: - CYBELEC Cybtouch touch screen controller - NC controller for backgauge, gap adjustment, number of pieces, cutting length - 1 side stop with scale, T-groove and tilting cam - 2 front support arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Folding finger guard with limit switch - motorized back gauge 1.000 mm travel - Ball screws - Photocell behind the machine - Ball rolls in the table - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - CE mark / Declaration of Conformity - Operating manual: Machine and control in German The data for this ad was created with ModulMWS  ...

: 32 /min Punching force: 60 to throat: 500 mm : 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: 2012 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 32 /min Punching force: 60 to throat: 250 mm : bis max. Ø 40x11 mm : 350x15 mm : 350x15 mm L-beam 90°: 120x120x10 mm : 45 mm square edge steel: 40 mm : 10 mm : Aufnahme bis max. 150x10 engine output: 5,5 kW weight: ca. 1600 kg Basic equipment: - Flat steel shears with knife set - Angle shears with knife set - Punch with quick release device for punches up to 40 mm - Support table for punching device - Triangular notching device - Support table for notching - bending station - Bending stamp with matrices V 40 and V 70 - electrical contact stop (1 meter) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Punching force: 45 t hole diameter in sheet thickness: Ø 27x13 mm : 24 /min L-beam 90°: 80x80x8 mm L-beam 45°: 60x60x6 mm flat steel: 200x13 mm : 7 mm engine output: 2,2 kW weight: 760 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 27 mm diameter - Rectangular notching device compl. with hold down - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 10 mm Punching force: 55 to : 40x10 mm flat steel: 300x15 oder 200x20 mm L-beam 90°: 120x120x10 mm L-beam 45°: 70x70x7 mm : 40 mm square edge steel: 40 mm : 37 /min. throat: 250 mm weight of the machine ca.: 1.600 kg Basic equipment: - Complete set of blades for flat steel shears - Complete knife set for bar cutter - Complete knife set for angle steel shears - Compl. Standard punching device - Stamp quick release device for punches up to 40 mm diameter - Rectangle notch compl. with hold downs - Complete knife set below for rectangular notching - Upper tool for rectangular notching - Support table for flat material - Punching table with stop - Notch with stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 6 mm voltage: 380 V control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 1,2 ° total power requirement: 11 kW weight of the machine ca.: 6.300 kg dimensions of the machine ca.: 4000x2100x1640 mm Equipment: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 Backgauge preselection - X axis Cutting gap adjustment Quantity Cutting length limitation Material preselection, including sheet thickness Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) on ball screws autom. can be folded up at max. Traverse path, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - fo ...

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 3100 mm plate thickness: 13 mm thickness at Niro-steel: 8 mm control: CYBELEC CybTouch down holder: 14 Stück cutting angle: 2,0° ° no. of strokes: 11 Hub/min voltage: 380 V total power requirement: 22 kW weight of the machine ca.: 12.100 kg dimensions of the machine ca.: 4000x2240x2235 mm Accessories / equipment: - CYBELEC-CybTouch control panel with digital display for backgauge - hydr. Cutting gap adjustment via control - 1 side stop - 4 front lifting arms - cut line lighting - Cutting gap adjustment - Cutting length limit - Ball rolls in the table - motorized back gauge 1.000 mm travel with recirculating ball screws,    automatically start at the end of the stop - Shear knives for stainless steel cuts as standard - Photocell behind the machine - SIEMENS electrical system - BOSCH / HOERBIGER hydraulic system - Footswitch - Operating instructions in German The data f ...

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 8 mm : 5 mm : 14 1/min : 3 ° : 7 pcs. : 500 mm : 7.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1800 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves manual adjustable and foldable back gauge exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cutting length 3,050 mm. Max. thickness 6.3 mm St 235 There is a set of spare knives for the scissors The scissors are fully operational and are in use.

Durma VS 3006 CNC Guillotine Shear Cutting length : 3000 mm Cutting thickness : 6 mm 3000X6mm +-0.05 cutting accuracy Machine is in good working condition

electrical network - 380 V frequency – 50 Hz main fuse – 20A main engine directly on line main engine power – 7.5 kW motor with rear pressure gauge – AC 0.37 KW control: SP8 Cutting length - 3100 mm Thickness of cut sheet metal in grade S355 - 6 mm, stainless steel sheet - 4 mm.

Baykal HNC 6100x16 NC Guillotine Shear Maximum cutting length : 6100 mm Maximum cutting thickness : 16 mm Machine is in good working condition

Crushers

digital readout for backgauge retractable backgauge Optional: upgrade to CNC control Cuttinglength: 3100 mm Max sheetthickness st 45: 20 mm Max sheetthickness inox: 15 mm Passage between uprights: 3400 mm Depht of throat: 300 mm Strokes/min: 7 > 30 str/min Backgauge: 1000 mm Adjustable cuttingedge: 0,5 > 3° Electric motor (power): 30 kW Length: 3400 mm Depht: 3900 mm Height: 2800 mm Weight: 22,3 ton

pressure: 60 t square edge steel: 35,0 mm round bar steel: 40,0 mm L-beam: 120 mm punching cross-cut in cmm: 28 in 15 mm throat: 220 mm flat steel: 300 x 15 mm oil volume: 45 ltr. total power requirement: 4,0 kW weight of the machine ca.: 1.250 kg. Dimensions (HxWxD): 1510 x 590 x 1570 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.