137,858 used machines on RESALE, but how to find them? Machine Search
sheet width: 6200 mm plate thickness: 8 mm throat: 60 mm distance between columns: 6400 mm cutting angle adjustment: 0,5 bis 2 ° total power requirement: 13 kW weight of the machine ca.: 19 t Cutting width: 6,200 mm Max. sheet thickness: 8 mm Throat depth: 60 mm Distance between side frames: 6,400 mm Cutting angle adjustment: 0.5° – 2.0° Total power requirement: 13 kW Machine weight: approx. 19 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 6040 mm plate thickness: 4 mm total power requirement: 12 kW weight of the machine ca.: 22 t dimensions of the machine ca.: m - Specification - backstop - Roller tray The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate thickness: 4 mm distance between columns: / mm weight of the machine ca.: 3,4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
round bar steel: 45 mm square edge steel: 45 mm L-beam: 12 mm : 40 flat steel: 450x15 mm L-beam 90°: 152x152x13 mm : 45 mm square edge steel: 45 mm : 12 mm weight of the machine ca.: 2323 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1300 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3050 mm plate thickness: 4 mm weight of the machine ca.: 6.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4050 mm plate thickness: 8 mm distance between columns: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2040 mm : 4 mm sheet thickness for stainless steel: 2 mm total power requirement: 7,5 kW rear stop: 750 mm weight of the machine ca.: 2600 kg dimensions: 2810 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity The data for this ad was created with ModulMWS - the software solution o ...
sheet width: 1350 mm : 3 mm sheet thickness for stainless steel: 1,5 mm rear stop: 600 mm total power requirement: 3 kW weight of the machine ca.: 1150 kg dimensions: 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity The data for this ad was created with ModulMWS - the software solution o ...
sheet width: 2550 mm : 4 mm sheet thickness for stainless steel: 2 mm rear stop: 750 mm total power requirement: 7,5 kW weight of the machine ca.: 3050 kg dimensions: 3300 x 2230 x 1360 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity Youtube video link: https://www.youtube.com/watch?v=pCuKwtBIQto&ab_channel ...
sheet width: 6500 mm plate thickness: 3 mm back stop - adjustable: 1000 mm dimensions: 7300x2400x2300 mm Weight: 20000 kg Equipment/accessories: - 1 x set of knives The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2540 mm plate thickness: 2 mm thickness at Niro-steel: 1,25 mm no. of strokes: 63 Hub/min cutting angle: 1,13 ° table height: 750 mm table width: 320 mm back stop - adjustable: 5,0-550 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg Equipment: - manual backgauge, with analog display Adjustable from the front stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3060 mm plate thickness: 6 mm no. of strokes: 20 Hub/min stroke: 750 mm Motor Capacity: 11 kW oil volume: 160 l weight of the machine ca.: 5.500 kg dimensions: 3860 x 2560 x 1560 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
hole diameter in sheet thickness: Ø 30 in 12 mm hole diameter in sheet thickness: Ø 19 in 19 mm pressure capacity max.: 45 to weight of the machine ca.: 1.700 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3000 mm plate thickness: 4 mm distance between columns: 3050 mm total power requirement: 8 kW weight of the machine ca.: 4.8 t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2050 mm total power requirement: 3 kW weight of the machine ca.: 3 t dimensions of the machine ca.: 2,5 x 2 x 1,5 m guillotine shears adjustable backgauge 600 mm good condition working range: 2050 x 2 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting capacity: - mm throat: - mm round blank diameter max.: 500 mm round blank diameter min.: ? mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3030 mm plate thickness: 3.00 mm thickness at Niro-steel: 1.50 mm no. of strokes: 34 Hub/min cutting angle: 1.6 Grad table height: 820 mm distance between columns: 3120 mm Control: POS 100 engine output: 2x 4.0 kW weight of the machine ca.: 3600 kg range L-W-H: 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros () Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a DUO-CUT drive on both sides. Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge with SCHRáDER POS 100 NC control system digital position display for the backgauge adjustable from the front right with setpoint/actual value input stepless adjustment over the entire travel range Limit valu ...
sheet width: 2050 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 2100 mm down holder: 12 Stück no. of strokes: max. 26 Hub/min cutting angle: 1.6 ° back stop - adjustable: 750 mm Control: ELGO oil volume: 120 ltr. total power requirement: 11.0 kW weight: 3900 kg range L-W-H: 2860 x 2100 x 1560 mm with only approx. 400 operating hours () Original price approx. 30.000 euros Special price upon request Features: - Robust electro-hydraulic oscillating shear - ELGO digital display, Model P9521, for electric backgauge - NC-controlled electric motor-driven material/backgauge Travel range continuously adjustable backgauge X = 750 mm Backgauge with backlash-free ball screw Travel speed: 100 mm/sec - 1x sturdy side stop with T-slot and millimeter scale - 1x sturdy support arm - Electric cut length limiter Cut length limiter to increase the number of ...
sheet width: 3100 mm plate thickness: 6.35 mm thickness at Niro-steel: 4.00 mm cutting angle: 0.5 - 2.5 ° cutting gap adjustment: 0.05 - 0.8 mm no. of strokes: 12 - 50 Hub/min back stop - adjustable: 1000 mm Control: DELEM DAC 360 oil volume: 120 ltr. engine output: 9.5 kW weight: 7000 kg. range L-W-H: 3950 x 1950 x 1680 mm well-maintained condition () equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 14 Stück cutting angle: 1°5 no. of strokes: 14 Hub/min control: ENC 100 table width: 500 mm work height max.: 880 mm oil volume: 170 ltr. total power requirement: 11.0 KW weight: 5550 kg range L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - https://www.youtube.com/watch?v=o2LW7L2r7Xs ---------------------------------------------------- Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front ---------------------------------------------------- Equipment: - electro-hydraulic guillotine shears swing cut - with DURMA ENC 100 NC control unit Backgauge prese ...
sheet width: 1320 mm plate thickness: 2.5 mm ST thickness at Niro-steel: 1.2 mm blade length: 1350 mm no. of strokes: 34 Hub/min back stop - adjustable: max. 825 mm cutting angle: 1.5 ° work height max.: 810 mm Control: konv. engine output: 3.0 kW weight: 1100 kg range L-W-H: 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used () Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor - Manual backgauge, including analog position indicator Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connec ...
sheet width: 3100 mm plate thickness: 2 mm rear stop: 1000 mm cutting angle: 1°06 ° no. of strokes: 45 Hub/min total power requirement: 3,0 kW dimensions of the machine ca.: 3600 x 2200 x 1600 mm weight: 4500 kg Equipment: - Electric motorized backgauge - With digital ELGO position display - Manual cutting gap adjustment - 1x side stop with mm scale - 2x support arms - 1x freely movable double foot switch - Front finger guard Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width - max.: 200 mm plate thickness: 6 mm flat steel: 70 x 7 mm round bar steel: 13 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 800 x 500 x 1800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 4100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm no. of strokes: 12 - 24 Hub/min cutting angle: 1 ° 30 work height max.: 865 mm back stop - adjustable: 1.0 - 1000 mm down holder: 20 Stück Control: ENC 100 M column arm: 50.0 mm oil volume: 200 ltr total power requirement: 15.0 kW weight: 11460 kg range L-W-H: 5230 x 2250 x 2150 mm New price ~ 50,000 euros () Special price on request ----------------------------------------------------------- NC electro-hydraulic swing cut shears with DURMA ENC 100 M control manual cutting gap adjustment (eccentric) including pneumatic sheet holding device for thin sheet metal cuts ----------------------------------------------------------- Equipment: - robust electro-hydraulic swing cut shears - including DURMA ENC 100M NC control unit Back stop pre-selection - X axis Quantity Cutting length limitation Pivoting opera ...
sheet width: 3050 mm plate thickness: 13.0 mm thickness at Niro-steel: 8.0 mm cutting angle: 0.5 - 2.5 ° no. of strokes: 8 - 25 Hub/min back stop - adjustable: max. 1.000 mm Control: SIEMENS Number of downholders: 13 Stk. oil volume: 300 ltr. engine output: 21.0 kW weight: 8700 kg. range L-W-H: 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear Design: Circuit-guided - NC electro-motorized backgauge with SIEMENS NC control unit OP 7 Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: gebraucht : 2004 : 9726 : prompt, Zwischenverkauf v : Türkei : 6750 € : 1 : 1350 mm : 3 mm : 35 1/min : 1.5 ° : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1700 mm : 1350 mm : 1200 mm : 950 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side support arm 2 supporting arms user manual in GERMAN does not complie with the German UVV and Austrian AMVO BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-machines The data for this ad was created with ModulMW ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 25000 € : 480 € : 2050 mm : 6 mm : 30 1/min : 2.3 ° : 750 mm : 7.5 kW : 800 mm : 530 mm : 2355 mm : 2720 mm : 1630 mm : 1230 mm : 3200 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 4 cutting edges on the lower blade 1000 mm squaring arm with scale, T-slot, and flip stop 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Balls in the table Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2026 : 090187 : prompt, Zwischenverkauf v : Türkei : 14400 € : 276.48 € : 1 : 1350 mm : 3 mm : 35 1/min : 550 mm : 3 kW : 2 Stk. : 850 mm : 400 mm : 1900 mm : 1350 mm : 1260 mm : 1060 kg manualback gauge automatic sheet hold down hold down with rubber pads moveable foot switch side lay 2 supporting arms light barriers on the back of the machine user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : 2025 : 090132 : prompt, Zwischenverkauf v : Türkei : 47500 € : 798.38 € : 1 : 41800 € : 3100 mm : 6 mm : 4 mm : 50 mm : 15 1/min : 1.5 ° : 16 : 14 to : 1000 mm : 200 mm/s : 15 kW : 200 l : 2 Stk. : 865 mm : 500 mm : 3515 mm : 4110 mm : 2200 mm : 3700 mm : 2100 mm : 7300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Var ...
: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 13900 € : 266.88 € : 3.5 mm : 750 mm : 2.2 kW : 6,1 m/min : 2000 mm : 600 mm : 1400 mm : 750 kg : 200/1200 mm Rahmen aus geschweißter Stahlkonstruktion Klingen aus Spezialstahl Lange Lebensdauer der Messer dank der konisch gelagerten Wellen Getriebemotor mit Bremse System zur Einstellung des Schnittdurchmessers mit motorisierter Leistung Mobiles Steuerpult System zum Schneiden des Innendurchmessers Ausrüstung gemäß CE Regulierungen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 7500 € : 144.75 € : 2 mm : 700 mm : 1.1 kW : 7,5 m/min : 1400 mm : 400 mm : 1150 mm : 360 kg : 120 / 1.000 mm : 280 mm gearbox motor with brake footpedal central lubrication OPTIONAL EQUIPMENT (PRICE ON REQUEST): pneumatic upper roll feed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 68700 € : 1298.43 € : 3100 mm : 13 mm : 8 mm : 50 mm : 13 1/min : 1.75 ° : 16 : 37 to : 1000 mm : 200 mm/s : 30 kW : 330 l : 2 Stk. : 840 mm : 600 mm : 3550 mm : 4280 mm : 2300 mm : 3600 mm : 2350 mm : 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttingleng ...
HABEGGER Grignoteuse meuleuse ist eine Nage- und Schermaschine (Nibbling und Shearing), ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Angaben zu Arbeitskapazitäten sind in den vorliegenden Informationen nicht enthalten. Technische Daten wie Drehzahlen, Verfahrwege, Leistung oder Abmessungen wurden nicht angegeben. Entwickelt, um enge Toleranzen zu erreichen und für Anwendungen, die präzise Bauteilfertigung erfordern Technische Daten ohne Gewähr
: neu : ca. 12 Wochen ab Auftrags : Türkei : 29200 € : 557.72 € : 3200 mm : 2 mm : 1.2 mm : 3650 mm : 1700 mm : 1300 mm : 3100 kg NC-controlled backgauge 750 mm ELGO P40T touchscreen Rear light barrier protection Front finger guard cover Extendable front support bracket Cutting line illumination Equipment compliant with CE directives Operating instructions in German or English OPTIONS: Sheet support, front or rear unloading € 1.900,00 Sheet support, front andrear unloading(NC controlled) € 2.840,00 (gauging length decreases approx. 200 mm) 1000 mm servo-backgauge € 900,00 Side gauge extension to 2 m € 410,00 Sheet metal carriage with rollers (capacity 1,000 kg) € 1.040,00 Angle stop € 460,00 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 12 Wochen ab Auftrags : Türkei : 16400 € : 314.88 € : 2050 mm : 3 mm : 35 1/min : 1.5 ° : 750 mm : 3 kW : 800 mm : 520 mm : 2720 mm : 1575 mm : 1230 mm : 1900 kg The machines feature a robust, welded steel frame for maximum cutting precision Motorized back gauge 750 mm, ball screw spindles, NC control 2 cutting edges on the upper blade and 2 cutting edges on the lower blade 800 mm squaring arm with scale 2 support arms Mechanical downholder Manual cutting gap adjustment on the front Cutting line illumination Foot pedal Emergency stop button Operating manual with EC declaration of conformity. INCLUDES THE FOLLOWING OPTIONAL EQUIPMENT: Blades suitable for cutting stainless steel Rear light barrier protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 € : 1126.44 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...
Offer 26220 Technical data: - Cutting length 3050 mm - Cutting thickness at 400 N/mm² strength 16 mm - Cutting thickness at 400 N/mm², strength up to 1000 mm, length 18 mm - Cutting angle 0.5 - 3 ° - Number of sheet hold-downs 18 pcs - Stroke rate 10 - 23 min - Mot. Back gauge up to 1000 mm - Rear area protection with light barrier - Front angle stop 1000 mm - HSLX version: - CNC control HACO SC 5 controller when entering the sheet thickness in mm - Autom. Cutting angle adjustment according to sheet thickness - Cutting length limitation - Autom. Positioning of the backgauge (8 programs – 80 sets) with - Digital display and autom. Backgauge retraction - Drive 400 V / 22 kW - E - Footswitch - Space requirement without support arms approx. W 4500 x H 2250 x D 2200 mm - Weight approx. 14500 kg
Silverson EX High shear mixer on stand Stainless high shear mixer on stand, 3Kw, 750mm shaft length, high shear diameter 105mm, 3Ph
Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings, and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-49495-224
Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings, and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-49495-24
Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings, and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-49495-124
cutting length: 2500 mm plate thickness: 3 mm distance between columns: 2050 mm blade length: 2650 mm total power requirement: 3 kW weight of the machine ca.: 2,5 t - The scissors are equipped with an adjustable stop on the back. stop. Each side is equipped with a millimetre counter, so that the guarantee that the cuts are true to size. - Spring-loaded automatic hold-downs prevent the material from shifting during the cutting process. material during the cutting process. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 6080 mm plate thickness: 6.0 mm rear stop: 1000 mm cutting angle: 0.5 - 2.0 ° down holder: 29 Stk no. of strokes: ca. 10 Hub/min total power requirement: 22.0 kW dimensions of the machine ca.: 7300 x 2150 x 2750 mm weight: 25500 kg Current list price: approx. 150.000 euros Features: - Electro-hydraulic, slide-guided sheet metal shear - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - Electrically driven backgauge with ball screws - Manual central lubrication - Cut line illumination - Ball bearings in the table - Fold-up finger guard, 1.000 mm - Side stop with T-slots, tilting stop, and scale - 5 support arms with T-slots - Photoelectric sensors on the rear of the machine - 1 freely movable foot switch Includes optional equipment: - Pneumatic sheet metal holding device The data for this ad was created with ModulMWS - the software so ...
sheet width: 2540 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual backgauge up to 550 mm Side gauge and table extensions Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Offer 26238 Technical data: - Max. working width 3190 mm - Max. material thickness at 40 kg/mm², strength 6.3 mm - Cutting angle 1.2 ° - CNC - Cutting gap adjustment - Strokes 30 to 64 1/min - Stand projection 100 mm - Table height approx. 800 mm - Number of hold-downs 16 pcs - Back gauge 5 - 1000 mm - 3 pieces front support arms 1500 mm - E – Footswitch - Rear tilting roller table - Drive 400 V / 18.5 kW - Space requirement approx. W 3900 x H 1800 x D 2100 mm - Weight approx. 6800 kg - with : - CNC control RAS system - Rear tilting roller table / sheet metal hold-up - Rollable material collection container - Electronic rear space protection / light barrier
Offer 26213 Technical data: - Max. working width 1030 mm - Max. material thickness at 40 kg/mm² strength 2 mm - Adjustable back gauge 10 - 500 mm - Front angle stop - Front support extendable approx. 400 mm - Space requirement approx. W 1250 x H 1050 x D 750 mm - Weight approx. 700 kg
Manufacturer: Baykal Type of machine: mechanical guillotine shear Year of manufacture: 1996 Technical Specifications: - Cutting length: 2520 mm - Operating voltage: 380/50/3 (V/Hz/Ph) - Motor power: 7.5 kW - Strokes per minute: 48 Find more here - .ucymachines/ Contact us at - sales@ucymachines
Offer 26307 Technical data: - max. working width 3050 mm - max. cutting capacity St 40 6 mm - Cutting angle adjustable mot. 0,5 - 3 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 18 pcs - Mot. - Back gauge 10 - 750 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 9 - 17 rpm - Hydraulic drive 400 V / 7.5 kW - Table height 770 mm - Space required including back gauge, without front support arms - approx. W 3750 x H 1600 x D 1650 mm - Weight approx. 4500 kg - with: - E. - Foot - Switch - Cut line illumination
maximum number of results exceeded
please refine your search
59 € 
