shear lvd used for sale

Includes guide rails \"Posistion automation\" type memory control approx. 7000 mm (total length 8000mm) : capacity : 600x15 mm; coordinate table 1500mm; Please note! Excluding punching tool Auction-ID: A1-47361-5

Baykal hydraulic plate shear Type: HGL 3100x6 Year of construction: 2012 Serial Number: 18484 Max. cutting capacity: 6 mm (St42) Cutting length: 3,060 mm Number of strokes: 20 per minute Motor power: 11 kW System pressure: 200 bar Connection: 400 V / 50 Hz / 3-phase Hydraulic reservoir: approx. 140 litres Machine weight: approx. 5,500 kg Dimensions (LxWxH): approx. 3,860 x 2,560 x 1,560 mm Equipped with digital operation/readout Equipped with adjustable backgauge Equipped with hydraulic downholders Equipped with foot control with emergency stop Auction-ID: A1-47361-42

Equipped with walk-in protection; Includes guide rails; Attention, loading with a truck-mounted crane! Auction-ID: A1-47361-4

sheet width: 3100 mm plate thickness: 4.0 mm thickness at Niro-steel: 2.5 mm cutting angle adjustment: 1.0 ° back stop - adjustable: 10 - 1000 mm adjustment speed: 180 mm/s down holder: 21 Stück strokes per minute: 18 - 31 column arm: 200 mm Control: ELGO P8721 oil volume: 160 L 0: max. 300 bar voltage: 400 V main drive: 7.5 kW weight of the machine ca.: 4800 kg. dimensions of the machine ca.: 3660 x 2070 x 2140 mm from a maintenance workshop good condition () Features: - Electro-hydraulic sheet metal shear (swing cut) - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left for positioning the electrically driven backgauge Target/actual position value input possible Adjustment via three-phase motor using a toothed belt - Support table with ball bearings Recessed handles between the table plates - Front finger guard -  ...

A Geka ironworker with integrated punching unit for punching and shearing flat bar, section steel and bar stock is offered. Punch diameter/material thickness: 28mm/13mm, flat bar shearing capacity: 300mm×10mm/200mm×13mm, max. round bar diameter: 30mm, max. square bar dimensions: 30mm×30mm. Including tool cabinet with various punch and die units as well as a stop extension to 3m. The flat bar and section steel shearing units were hardly used. An on-site inspection is possible.

Beyeler, CP 4100x10, Cutting length : 4100mm, Max. sheet thickness 10mm,

sheet width: 2025 mm plate thickness: 3.0 mm distance between columns: 2050 mm no. of strokes: 38 Hub/min cutting angle: 1.38 ° Control: konv. total power requirement: 4.0 kW weight of the machine ca.: 1100 kg dimensions of the machine ca.: 2299 x 2000 x 1130 mm Current new price: approx. 20.000 euros From a maintenance workshop Special price available upon request Features: - Robust / high-performance electromechanical sheet metal shear - Manual material backgauge Infinitely variable adjustment range Adjustment from the rear - via handwheel Includes mm scale - 1x side stop - 3x front support arms - 1x freely movable foot switch - rear sheet metal chute - front sheet metal removal for smaller workpieces - digital piece counter - control cabinet - mounted on the front left The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Jean Perrot Type: MK.2006 Year: 1981 Vehicle number: 8971018 Release date: 10/03/1981 Equipment: electrically adjustable rear gauge, digital position display, on/off controls, cutting control, worktable with sheet metal supports Width displayed on order: 369.5 mm Remarks: Pre-owned condition with visible traces of oxidation. Auction-ID: A1-49695-244

Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of Holds: 18 Length and number of plate carriers: 5x 500 mm, 1x 1500mm, side stop 1500mm including ball transfer units Equipped with high-holding device: No Working height: 770mm Auction-ID: A1-47360-82

Machine number: 5150 Working length: 1450 mm, max. power: 3.5 mm Reference: STS - Lot 7 Auction-ID: A7-49882-248

Machine number 139/6238/11

Sheet width 2500 mm Sheet thickness 3.0 mm Stand width 2550 mm Cutting angle adjustment - Back gauge - adjustable max. 510 mm Cutting gap adjustment - mm Total power requirement kW Machine weight approx. 1.8 t Dimensions L x W x H 3.3 x 1.4 x 1.8 m Auction-ID: A7-50084-45

This is a Lefort Mobile 800 shear baler designed for processing light scrap and car bodies. It is the AS variant, which means an asymmetric box where one side is higher than the other to fit in more scrap per load. Originally manufactured in 2006, this machine was factory refurbished in 2011, after which it was sold to the previous owner. We took it back in part exchange earlier this year and have prepared it for sale. The machine does require some refurbishment work and can be sold either as seen or with a package of work completed. For more information, please contact us.

Häner Metal Shears HMS18.25 Excavator weight: 18 - 25 t Operating weight: 2,350 kg Dimension A: 2,760 mm Dimension B: 950 mm Dimension C: 520 mm Dimension D: 730 mm Rotation: 360° Front cutting force: 160 t Rear cutting force: 110 t Interchangeable blades: yes Hydraulic Hoses Turn: 1/2 inch Hydraulic hoses open/close: 1 inch Oil flow rate rotation: 30 - 40 l/min Operating pressure on/off: 280 -300 bar Oil flow rate open/close: 180 - 240 l/min Cutting performance: Steel plates: 30 mm U-beam: 300 x 100 x 15 mm H-beam: 300 x 100 x 15 mm T-beam: 320 x 15 mm Angle iron: 200 x 200 x 18 mm Round steel: Ø 70 mm Steel tube: Ø 245 x 10 mm Cycle time: 8 - 12 s Auction-ID: A1-50077-1620

Inoxmim 500L High shear mixing vessel 2020, Stainless mixing vessel, top mounted agitation with scrape surface, bottom mounted high shear mixer 7.5Kw, jacketed both steam and water, with digital temperature display and a Thermosiphon vessel, mobile, with PDF manuals, 3Ph

5-fold combined profile steel shears with: - Flat steel shears - Profile steel shears - Steel bar shears - Notches - Hole punch Round steel 34 mm Square steel 30 x 30 mm Angle steel 100 x 10 mm Flat steel 100 x 14...160 x 1 mm Knife length 175 mm T-steel 100 x 10 mm Notching device: L and T steel 10 mm Hole punch: Pressure capacity 45 t Projection 305 mm Total power requirement 3 kW Machine weight approx. 1.2 t Space requirement approx. 1.4 x 0.8 x 1.5 m Auction-ID: A7-50084-36

Profile steel shears combined: - Footswitch - Length stop Round steel 30 mm Square steel 28 mm Angle steel 90 x 8 mm Flat bar 150 x 8 mm Pressure capacity 35 t Total power requirement 2.8 kW Machine weight approx. 0.5 t Space requirement approx. 0.75 x 1.0 x 1.5 m Condition: unchecked (6) Auction-ID: A7-50084-47

Profile steel shears with - 1 foot trigger - Support tables - Rectangular notches - Hole punch incl. tools Round steel 32 mm Square steel 30 mm Angle steel 80 x 80 x 8 mm Cutting capacity flat steel 80 x 13 mm Punching force 36 t Projection 170 mm Working stroke 28 mm Working height 980 mm Material thickness 28 x 13 mm Hole diameter in sheet thickness 25x10 / 30x8 mm Machine weight approx. 0.8 t Space requirement approx. 1.2 x 0.8 x 1.9 m Condition: unchecked (6) Auction-ID: A7-50084-102

Cutting length 1070mm Cutting thickness max. 2mm Material stop max. 550mm See pictures Auction-ID: A7-50084-38

Profile steel shears Round steel 25 mm Square steel 22 mm Angle steel 70 x 7 mm Cutting capacity 100 x 10 mm Sheet thickness 10 mm Total power requirement 1.3 kW Machine weight approx. 0.6 t Space requirement approx. 1.1 x 0.65 x 1.5 m Condition: unchecked (6) Auction-ID: A7-50084-4

Hydraulic guillotine shears with - Cutting length adjustment - Cutting angle adjustment - Support brackets - Angle stop - Rear enclosure - Mobile material container Sheet width 3050 mm Sheet thickness 6.5 mm Stand width 3100 mm Stop depth 1000 mm Cutting length variable Variable cutting gap adjustment Connected load 12.0 kW Machine weight approx. 5.5 t Dimensions approx. 3.5 x 2.2 x 1.8 m Auction-ID: A7-50084-35

Hydraulic guillotine shears with - Cutting gap adjustment - Support brackets - Angle stop Sheet width 1000 mm Sheet thickness 5.0 mm Stand width 1100 mm Stop depth 1010 mm Cutting length variable mm Cutting gap adjustment variable mm Connected load 5.0 kW Machine weight approx. 2.5 t Space requirement approx. 1.8 x 1.6 x 1.7 m Auction-ID: A7-50084-18

Sheet width 2500 mm Sheet thickness 3.0 mm Stand width 2620 mm Back gauge - adjustable 850 mm Machine weight approx. 2.8 t Dimensions L x W x H 3.2 x 1.8 x 1.7 m Condition: unchecked (6) Auction-ID: A7-50084-146

Profile steel shears with: - Hole punch - Notches - Footswitch - Machine light - Mounted on trolleys Round steel 33 mm Square steel 30 mm Angle steel 60 x 8 mm Hole diameter in sheet thickness 20 in 13 mm Hole punch: Printing capacity 35 t Hole punch: projection 320 mm Hole punch: large stroke length 24 mm Hole punch: Capacity (diameter x thickness) 30 x 9 mm Hole punch: Capacity (diameter x thickness) 20 x 13 mm Total power requirement 1.5 kW Machine weight approx. 1.7 t Space requirements approx. 1.5 x 0.7 x 1.8 m Auction-ID: A7-50084-126

Hydraulic guillotine shears with - ELGO control for backgauge - Cutting angle adjustment - Cutting length adjustment - Cutting length limitation (time-dependent) - Sheet thickness adjustment - Backgauge with free-wheeling function - Cutting line lighting - Side stop - 3 support brackets - Good condition Sheet width 3050 mm Sheet thickness 16 mm Stand width 3050 mm Stop depth 15-1000 mm Cutting angle adjustment yes ° Cutting gap adjustment yes mm Connected load 30 kW Machine weight approx. 14..5 t Space requirements approx. 4.0 x 260 x 2.55 m Auction-ID: A7-50084-25

Used, untested. System pressure: 260 bar. Loading conditions: Is loaded onto the truck Forklift and crane available Auction-ID: A7-50094-9

Make and Model: Lefort Konkest 650 (currently designated as the Konkeror 650), the entry-level model of the manufacturer’s uniform monobloc product range. Year of Manufacture and Delivery: 2023 Expected Availability: Early 2027 (taken as a trade-in due to the delivery of a new machine). Operating Hours: Approximately 5,000 operating hours (the machine had 4,349 hours on March 10, 2026). Condition: Excellent, continuously maintained, and in immediate working condition. Cutting Force: 650 tons, featuring the latest shear head design. Compression Box: 6.0-meter folding compression box. Power Unit: Reliable Perkins 275 horsepower diesel engine, enabling fast and flexible installation across most sites. Applicability and Efficiency This equipment is specifically designed to be an ideal addition to smaller metal scrap processing yards. Thanks to ...

For sale is a high-performance, industrial-grade Trax 600 shear baler. This machine is expertly designed for the efficient compaction and size reduction of various metal scrap types, structural steel, and light plates. Key Technical Specifications and Features: Type: Trax 600 Shear Baler Year of Manufacture: 2021 Serial Number (SN): 1459 Operating Hours: 4,871 hours (as of August 19, 2026) Application: Engineered for the continuous processing of mixed metal scrap, light sheet metal, and industrial steel scrap, featuring high pressing and cutting force. Availability and Schedule: This equipment is scheduled to be taken back in part exchange at the beginning of December 2026.

For sale is a robust Conkest Mobile 500 machine. We have collected this machine, however, it has sustained fire damage. Our plan is to carry out a comprehensive package of work to restore its mobility and replace many of its worn and damaged parts. Key Advantages and Features: Radio Remote Control: The unit can be fully operated via a radio remote control, providing exceptional flexibility, convenience, and safety for the operator. Thanks to remote operation, machine movement and workflow management can be carried out precisely from an optimal viewpoint and a safe distance within the work area. Important Note Regarding Photos: Please note that the attached photographs show the machine in its previous, pristine condition and do not reflect its current fire-damaged state. This machine provides an excellent foundation for a complete restoration, after which it can be return ...

Swing cut shears Make: Simat Type: SST 3010 Year of Make: 1990 Cutting length: 3010 mm Sheet thickness: 10 mm -Cutting line lighting -Adjustable cutting gap - Motor power: approx. 19 kW -Backgauge Length: 3750 mm Width: 1700 mm Height: 1530 mm Weight approx. 8700 kg Return stroke by nitrogen cylinder Nitrogen cylinder: resealed in 2024 no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense.

Key data: 3050 mm, 20 mm, 800 mm

Hydraulic Sheet Metal Shear / Hydraulic Guillotine Shear Make: Steiner Type: HTS 30/20 Year of manufacture 1978 -Cutting length: 3050 mm -Cutting thickness: 20 mm -Back gauge: 800 mm, via handwheel - Motor power: approx. 30 Kw -Spare blade Basic machine: 4650 mm long, 2610 mm wide, 3200 mm high Weight: approx. 27,000 kg -Mechanical, in good condition- -Optical, in good condition- Hydraulics leak slightly no guarantee, no return, no warranty Machine is still in commercial use and can be viewed by appointment. Transport from the hall and removal is carried out by the buyer and at his expense

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-50066-124

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-50065-24

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-50066-24

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-50065-224

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-50065-124

Reliable tool that combines power, precision and comfort. This device is designed for those who value efficiency, time savings and ergonomics, regardless of their level of gardening experience. Auction-ID: A7-50066-224