129,264 used machines on RESALE, but how to find them? Machine Search
General SKUR0162 MakeAZO Liquids GmbH (D) LocationBarneveld TypeContinous Powder Mixing Main Features MaterialStainless steel Motor12 KW Specified Features - Inline mixer MaterialStainless steel Information No.111182-01 Year of construction2015 Floor space3,3x1,5 M Total height2,8 M Weight1900 Kg Extra SpecificationsIncluded 1 X Blender type PMXR material Stainless steel, motor 2,2 kW, with seal barrier system brand Aerni type AFR 168 ZS 8L max pressure 23 bar with liquid circulation pump 0,18 kW 1 x 520 ltr. tank brand Urban type wasserbehalter serial number 15.1606 pressureless, conical bottom, flat top. single-walled, uninsulated, on legs. 1 x Schenk Process powder funnel MechaTron type GRLS 27.070.000.0083 serial number V093547.A01 built in 2015 with a vibrating chute underneath. 1 x ITT Borneman screw spindle pump type SLH-4G-2033 working pressure 4 bar 5.5 kW. 1 x ...
sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
General SKU251M191 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/50-20 No.14078-01 Main Features MaterialStainless steel Motor45 KW Rotor150 mm Specified Features - Inline mixer Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 80mm Outletdia. 80mm Motor45,0 KW, 400/690 Volt Rotor speed2960 Rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction2005 Floorspace1,4x0,8 M Total height0,8 M Weight500 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
older Gebr. Lever shears on base frame Technical data Knife length 500 mm Cutting range approx. 3-4 mm Dimensions 800 x 170 x 1300 mm dto. incl. base frame 1300 x 600 x 1780 mm Remarks / Accessories: Underframe, small damage to the knife Maschinenladen Oeben GmbH Krahnendonk 116 D-41066 Mönchengladbach Phone: + 49 2161 662701 maschinenladen.de InfoMachine Shop
Key data: 1020 mm, 2 mm
with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010
Key data: 2500 mm, 1 mm
Schechtl guillotine shears 2500mmx1.25mm in good condition with new knife and hand depth stop and foot switch. You will receive an invoice with VAT and net price. Shipping available worldwide. for questions Watsapp 0049(0)1607838365
General SKU058C219 TypeFM342D LocationBarneveld Main Features MaterialStainless steel Motor15 KW Specified Features - Inline mixer Inlet70 mm Outlet40 mm Motor15KW, 380 volt Information Floorspace1,1 x 0.4 m Total height0.5 m Weight280 kgInline high shear mixers-Mixers > Inline high shear mixersBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU205N026 LocationBarneveld MakeWaukesha Cherry-Burrell TypeSP4 2009 Main Features MaterialStainless steel Motor18.5 KW Rotor80 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizes+/- dia.80mm Inletdia.47mm Outletdia.47mm Number of stages:1 With mechanical sealcheck Motor18,5 KW, 380/660 Volt Rotor speed2930 Rpm MaterialStainless steel Information No.1000002431623 Mounted on framecheck Floorspace1,4x0,4 M Total height0,7 M Weight300 KGInline high shear mixersWaukeshaMixers > Inline high shear mixersBrand > Waukesha What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKUR0088 MakeSchröder & Co Machinenfabrik LocationBarneveld Main Features MaterialStainless steel Motor2.2 KW Rotor90 mm Specified Features - Inline mixer Rotor sizesdia. 90mm Inletdia. 20mm Outletdia. 20mm Motor2,2 kW 230 Volt With frequency controllercheck MaterialStainless steel 1.4401 (316) Inline high shear mixers Inlet20 mm Outlet20 mm Information No.33-177 Year of constructionunknown Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,5 M Total height1,6 M Weight220 KgInline high shear mixersSchröderMixers > Inline high shear mixersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mor ...
This EHT ECOCUT was manufactured in 2003. A robust hydraulic shearing machine, it features a cutting length of 3,050 mm and a thickness capacity of 13 mm. It operates with an 18.5 kW main motor and includes an ELGO P8511 control for precision. Consider the opportunity to buy this EHT ECOCUT hydraulic shearing machine. Contact us for more information.
General SKU329S526 MakeIndag Maschinenbau GmbH (D) LocationBarneveld CEcheck TypeDLM-1/3 HO (S) Pressure Working pressure6.6 Bar Main Features MaterialStainless steel Motor3 KW Specified Features - Inline mixer Inletdia. 400 mm, dia. 35 mm, Outletdia. 35 mm With jacketcheck Motor3kW 220-240/380-415 Volts With frequency controllercheck Rotor speed400 rpm With vesselcheck Capacity49 Ltr. Vessel sizesdia. 400 x 650 mm With jacket19 Ltr. Max. temperature-10/100 °C MaterialStainless steel 1.4301 (304) Information No.4315 Year of construction2006 Mounted on framecheck With switchgearcheck Floorspace1,8x0,9 M Total height2,5 M Weight450 kg Extra Specifications With boiler: TWA GmBh &: Co. KG, SN: 015-2006-2542, 49 Ltr., max. working pressure: -0.95/4 bar, max. temperature: -10/100 °C, double-walled: 19 Ltr., max. working pressure: 0/4 bar, max. temperature: - ...
General SKU408S978 MakeKoruma Maschinenbau GmbH (D) LocationBarneveld TypeDisho In-Line 0/100 Main Features MaterialStainless steel Motor5.5 KW Inlet diameter32 mm Rotor100 mm Specified Features - Inline mixer Continuous reactorIn Line Dispersing and Homogenising Rotor sizesdia. 100 InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Rotor speed2885 rpm With vesselcheck Capacity40 ltr. Vessel sizesdia. 390x400mm with stirrer 0,55 kW 230/400 Volt 309-1539 rpm MaterialStainless steel 1.4571 (316Ti) Inline high shear mixers InletDN32 OutletDN32 With mechanical sealcheck Motor5,5 kW 400 Volt Speed2885 rpm With propellor stirrercheck Motor0,55 kW 230/400 Volt With variable speed drivecheck Speed309-1539 rpm Information No.5389 Year of construction1995 Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height1,7 M Weight200 ...
Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg
Sheet stop: 1000mm, max. cutting thickness: 10mm, cutting length: 3000mm, weight: approx. 8500kg. The machine complies with accident prevention regulations. The blades must be turned and reground. The drive motor was replaced 4 years ago. Documentation available. An on-site inspection is possible.
Key data: 3000 mm, 10 mm
Hydraulic guillotine shears - ordering machine (delivery time approx. 10-14 weeks) - incl. foot switch, touch screen, rear installation room with light barrier monitoring, cutting gap automatic/electric, cutting angle automatic/electric, hydraulic hold-down device, mot. Back gauge up to 1000 mm depth -Similar to illustrations- Hydraulic plate shear - order machine (delivery time approx. 10-14 weeks) - incl. foot switch, touchscreen, rear set-up area with light barrier monitoring, automatic/electrical cutting gap, automatic/electrical cutting angle, hydraulic hold-down, mot. backgauge up to 1000 mm -images similar-
used Coil-Tec Mounted Cross Shear 1000 x 1.0 with hold-down and dispenser, mobile, with connecting tabs to the workbench "Modular" Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working width: 1000 mm Sheet thickness max. steel: 1.00 mm Weight: 120 kg Colour: anthracite grey Dimensions: 1320 x 1500 mm Coil weight: 250 kg
Hello, We hereby offer you a used hand plate sheet metal snips, Bernardo, type HLS 1050 x 2.0. Manufacturer Bernardo, PWA Handels ges. m.b.H. Type HLS 1050 x 2.0 Year of construction 05/2023 Machine No. PWA-230114 Cutting length 1050 mm Max. sheet thickness (steel 400 N/mm²) 2.0 mm Backgauge adjustment 0 to 600 mm Table stop adjustment 95 to 450 mm Table size 1300 x 600 mm Working height approx. 765 mm Machine dimensions 2000 x 1040 x 1600 mm Transport dimensions 1900 x 1050 x 1120 mm Machine weight 500 kg Optional accessories included: Back gauge 600 mm Hold-down device with quick clamp Note: The aforementioned technical data have been taken from brochures of the manufacturer or other sources, for which we cannot guarantee the accuracy and completeness. Scope of delivery: 1 piece used hand panel sheet metal shears Bernardo, type HLS 1050 x 2.0 Area ...
Key data: 1020 mm
Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual
Key data: 4100 mm, 6 mm
Capacity: 4000 x 6 mm. Stroke 120 mm. DURMA DT-7 Control. Serial No. 608922260. Dimensions: 5230 x 3600 mm. Height 2150 mm. Weight 11460 Kg
used
met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x
plate thickness: 16 mm cutting length: 4075 mm weight: 23 t output: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting length: 2000 mm sheet thickness - max.: 6 mm operating pressure: 250 bar fabric-no.: S2669 weight of the machine ca.: 4,7 t working width: 2059 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions Knife sharpened 1700 kg
Key data: 3140 mm, 1 mm
new Schechtl motorized guillotine shears, with the following equipment: - within the EU: 32 amp connection plug with 5 m cable - 1 pair of steel scissor knives (single-edged) - Manual depth stop 0-750 mm with pneumatically operated tilting table, Laying down to the front - Support plates with 10 mm graduation and tape measure - Footswitch - Three-sided safety cage around the depth stop - Compressed air must be available: min. 6 bar, max. 10 bar - approx. 50 l/min - Cut-gap illumination - Electronic position display - Contact stroke counter tico 731.3 - Sheet metal stacking trolley light max, load capacity 300 kg Working length 3140 mm 20 Sheet thickness steel 1.5 mm 30 Sheet thickness Alu 2.25 mm 40 Blechdicke VA/Sheet thickness stainless 1,0 mm 50 Maschinennummer/Machine number MT 13952 Working length: 3140 mm Sheet thickness steel: 1.5 mm Sheet thickness alumi ...
CNC shearing machine manufactured in 2014. This DERATECH Practica CNC features a maximum cutting length of 2500 mm and can handle a maximum sheet thickness of 6 mm. Weighing 6100 kg, this machine is designed for durability and efficiency. If you are looking to get high-quality shearing capabilities, consider the DERATECH Practica CNC machine we have for sale. Contact us for further details.
Key data: 3100 mm, 6 mm
3100x6 mm Operating system DT 7
Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.
Key data: 2540 mm, 6 mm
Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with display Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 5500 kg
Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t
Key data: 3 mm, 10 mm, 1 mm
Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm
Key data: 2540 mm, 1 mm
Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005
Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 € : 1126.44 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...
Hand lever shear on steel fabricated trolley, ANR 25 Auction-ID: A1-45187-222
Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg
Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg
Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.
Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg
guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg
Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg
Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Thälmann, lever shears, profile steel shears type ScDH8 -Steel sheet: up to 8 mm -Round steel: up to 16 mm -Cutting performance: see photo type plate -Holder: continuously adjustable -Number: 2x lever scissors available -Price: per piece -Dimensions: 700/230/H1435 mm / 720/230/H1370 mm -Weight: 88 kg / 90 kg
Hand lever shears, lever shears, long-blade sheet metal and round steel shears, sheet metal shears, profile steel shears -Manufacturer: Peddinghaus, Lever shear, sheet metal and round steel shear type 3R 5 -Steel sheet: up to 5 mm -Round steel: up to 13 mm -Overall dimensions: 500/150/H1025 mm -Transport dimensions: 850/150/H370 mm -Weight: 22 kg
Hand lever shears, long-blade sheet metal and round steel shears, lever shears -Manufacturer: Mubea, sheet metal and round steel shear type 3/5 R -Cutting insert length: 200 mm -Steel sheet: up to 8 mm -Lift-down device: -Overall dimensions: 385/160/H1280 mm -Transport dimensions: 960/160/H390 mm -Weight: 22 kg
maximum number of results exceeded
please refine your search
30 € 
