sh used for sale

Goose neck shaped conveyor belt, Dimensions : 3,5 m. on floor mm. 2,2 m. horizontal + 1,18 m.inclined Angle 45° 1.166 mm discharging point, machine as new, used for test only Approx.450 mm working width Complete with transport paddles 1,5 kw gear motor Fitted with a 250 mm diam.magnetic drum at the end. Separate discharging outlet for extracted ferrous material, This machine was mounted under a 1500 WLK shredder, conditions: as new, type: extraction belt

Hobbb sharpening machine KAPP AST305

Gear shaving machine ZSA 320

Key data: 2540 mm, 6 mm

Max. cutting length: 2540 mm Max. sheet thickness: 6 mm steel Motorized adjustable back gauge (2 speeds) up to 1000 mm with display Side stop and table extensions Cutting length limitation Cut edge lighting Weight approx. 5500 kg

Gear shpping machine LIEBHERR LS 200F.

Gear shapping machine LIEBHERR LFS 200

Suitable for automatic, double-sided grinding of tooth flanks on circular saw blades with carbide tips., Accessories:, Partial enclosure,, 1 sawblade holder,, Coolant system., Circular saw outer diameter: 260 to 2200 mm, Circular saw bore diameter: 25 to 220 mm, sawblade thickness: up to 20 mm, Tooth pitch: from 10 mm, rake angle: any, Radial free angle: up to 6°, Tangential free angle: up to 6°, Grinding path: up to 75 mm, Grinding speed: 0.5 to 6 mm(s), Working speed: up to about 10 teeth/min, Grinding wheel diameter: 125 mm, Grinding wheel bore diameter: 32 mm, Grinding wheel peripheral speed: 26 m/s, Cooling lubricant pump capacity: 250 l/min, Coolant Tank Content: approx. 190 l, Connected load approx.: 6,5 kW (400 V / 50 Hz), Dimensions W x D x H =: 3050 x 1890 x 2050 mm, Weight approx.: 2160 kg, colour: green

sheet width: 1000 mm plate thickness: 3,0 mm distance between columns: 1050 mm diameter of upper rolls: 90 mm total power requirement: 1,1 KW weight of the machine ca.: 0,47 t dimensions of the machine ca.: 1,7 x 0,8 x 1,35 mm Sheet metal bending machine with custom dimensions: - Capacity 1050 x 3.0 mm - Digital display - Hardened rollers - Conical bending - Swiveling top roller - Brake motor - Safety device: Emergency stop cord - Documentation in English - 400V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BVM Compacta 5022 EGS Sleever + Inline BVM SC 4530 Heat shrink tunnel, Age 2014, Infeed flighted Conveyor length 1200 mm (approx.), BVM grouping System:, For production of multipacks of upto 4 Stacks side by side, consisting of:, Transport conveyor, width 400 mm, length 1000 mm (approx.), 1 Rake on top with mechanical positioning via frequency converter in servo mode, Including pneumatic flap for producing multipacks of 1, 2, 3 or 4 Stacks side by side, Max. length of Stacks 630 mm, BVM fully enclosing packing/ Sleeving machine Compacta 5022. Fully automatic, fed by conveyor belt with photocell control, including 100 format-data storage locations, Technical Data:, Service side standard : left had side, Sealing length : 500 mm, Passing Height : 220 mm (standard), Belt width infeed/ outfeed conveyor : 400 mm, Speed : upto 120 cycles/ min , Length sealing : continuously working, Film width  ...

Sheeter Fritsch Rollfix 5/630 Comfort for all doughs for rolling out and touring Manual operation Robust technology Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine overhauled

Sheeter Fritsch Rollfix 3WK 520 for all doughs for rolling out and touring Dough sheeter mobile with hand and foot control Connection 400V, 16A-CEE plug Used machine

Sheet metal cleaning machine KD-Putz Tubur Premium Sheet metal cleaning machine for baking trays / perforated trays with lubrication, sheet metal car Connection 400V, 16A-CEE plug Used machine from the bakery

Technical data: - Max. cutting width 2080 mm - Max. cutting capacity at 45 Kp/mm² 6 mm - Column projection 150 mm - Automatic cutting angle adjustment 0.3 - 2 ° - automatic. Cutting gap adjustment - Number of hold-downs 10 pcs - Stroke rate up to 22 1/min - Front angle stop approx. - 2 pcs. front support arms approx. - mot. Back gauge with positioning control up to 1000 mm - Rear space protection with light barrier - Cut line illumination - Working height 860 mm - E - Footswitch - Drive 400 V / 11 kW - Space requirement approx. W 3150 x H 2150 x D 2300 mm - Weight approx. 4.8 t

Sheeter Rondo Doge Compas 3000 Rondo Doge Model: SFA 612 Compass Touch computer control for all doughs for rolling out and touring with reel on the right for rolling up Connection 400V, 16A-CEE plug Used machine from the bakery

Key data: 2000 mm, 23 mm, 18 mm

4-roll plate bending machine Imcar-Italy capacity 2000 x18/23 mm year 1995, model 4RH12/3 , TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 18 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed

Standing sheet delivery GUK KS 430; cleaned and tested; Working width 430mm; Preparation for foosball; suitable for connection to GUK folding machines. Smal fold vertical stacker GUK KS 430; cleaned and checked; working width 430mm; control system for kicker; used for GUK folding machines.

Key data: 3000 mm, 40 mm, 35 mm

PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM - MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE INITIAL PINCH Machine used in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower D 470 mm -side rolls left/right D 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven hydraulic powered on gear unit • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening of top roll hydraulic drop-end to unload the plate fully round closed. • Variable speed working roll bending rotation hydraulic speed fast/slow.  ...

Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: K Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 15,520 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 60 pcs. Total number of pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 700kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile dimensions: 90 x 75 x 2.5 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 5,800 mm Depth: 1,100 mm 30x Pallet rac ...

Sheeter Fritsch Rollfix 6/650 E Computer Control / Program Control for all doughs for rolling out and touring with reel for rolling up Machine mobile Connection 400V, 16A-CEE plug Used machine

SB Sales Shelf 950 with lighting 4 beech wood grates 12 Removal flaps bottom with shelf Connection 220V Used device

SB Sales Shelf 1200 with lighting 4 beech wood grates 12 Removal Flaps bottom with shelf Connection 220V Used device

AGICOM recycling machines: Used single-shaft shredder MR2260 The used single-shaft shredder MR2260 is a powerful and energy-efficient shredder for the pre-shredding of cables, electronic waste, waste plastics, wood and much more... It has two stator knives for better product quality and higher hourly output. The shredder is equipped with an electronic control system. This monitors the hydraulic feed and the cutting shaft. As a result, the single-shaft shredder rarely has to reverse and retains its high throughput. Cooling is included. Year of manufacture: 2019, Machine in good condition. Ready for immediate use! Number of blades: 23 + 2 (rotor + stator) Rotor length: 600 mm Electric motor: Siemens 19.0 kW + 2.2 kW, 400 V Control: Siemens Dimensions: approx. 1750 x 1300 x 1800 mm Capacity: max. 200 – 400 kg/hour Safety: retraction of the feed in the event of overload, re ...

Key data: 3 mm, 10 mm, 1 mm

Guillotine shears from a company liquidation Worked as a cutting center with automatic stacking device make Theis Control cabinet , built in 2015 new Front support arms 1,000 mm Service regularly performed according to plan 3,000 x 10 mm

Chopper / universal / mill NAGEMA-FeumaProduct descriptionManufacturer: Nagema VEB Feuma GössnitzType: HU-1Year of construction: 1981Condition: used, baker's conditionOn wheels, mobileDetails see pictures.

KD Putz Sheet Metal Cleaning Machine 58cmProduct descriptionManufacturer: KD PutzCondition: used, functional, bakery conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobilefor 58cm wide 2-edge trays on the short sideThe KD Putz Sheet Metal Cleaning Machine is a special machine used in bakeries and kitchens to clean baking trays. This machine facilitates the removal of dough and baking residues from the trays to ensure a hygienic and clean working environment. The sheet metal cleaning machine from KD Putz can handle various

KD Putz Sheet Metal Cleaning Machine Bakery / GastronomyProduct descriptionManufacturer: KD PutzCondition: used, functional, bakery conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobilefor 60 x 40 cm trays, 2-edge on the short sideBack outputOuter dimensions: width 91.5 cm, depth approx. 74 cm, height 84 cmDetails see pictures.

Food processor / universal - food processor NAGEMA HU-1 Product description Manufacturer: Nagema VEB Feuma Gössnitz Type: HU-1 Year of construction: 1982 Condition: used, bakery condition On castors, mobile Details see pictures.

KD Putz Sheet Metal Cleaning Machine Avidi 800 Product description Manufacturer: KD Putz Type: Avidi 800 Condition: used, functional, bakery condition Material: Stainless steel Cladding with emergency stop switch on castors, mobile For 58 x 78 cm trays, 2-edge on the short side Back output Power connection: 230/400 Volt / 4 A / 1.1 kW Exterior Dimensions: width 112 cm, depth approx. 92 cm, height 84 cm For details, see pictures.

Manufacturer : JerosType : 5015/828400Volt 50Hz 1,5kW 4,4AZto clean 2-edged baking and perforated trays.For sheet width 78cmchassis completely made of stainless steela dirt drawer made of stainless steelFor 78x58cm wide trays on rollsDetails see picture

Sheet metal cleaning machine KD Putz for 78 cm traysProduct descriptionManufacturer: KD PutzCondition: used, functional, baker's conditionMaterial: stainless steel claddingWith emergency stop switchOn castors, mobileFor 58 x 78 cm trays, 2-edge on the short sideBack outputExterior dimensions: width 115 cm, depth approx. 88 cm, height 104 cmDetails see pictures.

Sheet metal cleaning machine Reini 60 â Product description âœ" Manufacturer: Metall- und Apparatebau GmbH âœ" Type: Reini 60 âœ" Year of construction: 1990 âœ" Condition: used, tested, Baker's condition âœ" Material: stainless steel âœ" Cleans with rotatable brushes âœ" suitable for 3 edge sheet metal sizes  60 x 80 cm âœ" With 2 parking brakes âœ" Outside dimensions W.: 79 cm, D.: 55 cm, H.: approx. 135 cm (height with attachment) Details see pictures

Baking Scoop / Oven Scoop NEW!  Baking scoop / oven shovel made of aluminium Dimensions 470x565 mm Edge height 30 mmDetails see picture

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : II A.M.K 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edged baking and perforated baking sheets. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Shortcrust pastry with trolley Overall dimensions: W: 133 cm, D: 85 cm, H: 196 cm Plate dimensions: W: 79 cm, D: 116 cm, H: 3 cm We have 2 pieces in stock See picture for details

Sheet metal cleaning machine KD Putz Manufacturer : KD Putz Type : AVIDI 800 240/400Volt 50Hz 1,1kW 4,0A For cleaning 2-edge baking and perforated trays. Chassis completely made of stainless steel a dirt drawer made of stainless steel for 58x78cm wide trays on wheels Baker's condition Details see picture

Short Spreader No. 1878-12 3 pieces NEW! Â Short spreader, curved stainless palletLong angle pallet 123 piecesNo. 1878-12Â For details see picture

Short Spreader No. 1878-10-H 3 pieces NEW! Â Short spreader, curved stainless palletMedium angle pallet 103 piecesNo. 1878-10-HÂ Details see picture

Short glaze palette 3 pieces NEW! Â Short Glaze PalletStraight Stainless Confectioner Glaze Pallet3 pcsNo. 603Total length 275 mmBlade length about 165 mmOnly 22 mm wide See picture for details

Shaft Cutting Knife No. 1815-12 3 pieces NEW!  Shaft cutting knife 3 piecesNo. 1815-12Stainless steel, full length 44 cm,  Only with hollows, other side blunt Details see picture

Sheet Metal Cleaning Basin Fresh Manufacturer : Fresh Type : Spritzmatic Exterior Dimensions : W: 122cm D: 33cm H: 86cm Interior Dimensions : W: 102cm D: 29cm H: 70cm Cleaning for 60x40cm and 60x80cm wide trays on casters Details see picture   

 Aluminium Perforated Sheets 3 Rand NEW(10 pcs) Aluminium Perforated Sheets 3 Rand 600 mm x 400 mmPerforated Sheet 3 Rand  , Edge Height 23 mmRound Perforation 3.0 mmMaterial Thickness 1.5 mmNEWDedetails see picture

Key data: 2540 mm, 1 mm

Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005

Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.

Kallfass Universa 8060 Spezial (1999) Type: Automatic L-sealer / shrink wrapping machine Format Max. product size: approx. 800 × 600 mm Max. height: approx. 200 ? 250 mm (depending on setup) Material Film type: polyolefin (PO), polyethylene (PE), PVC shrink film Film width: up to approx. 800 mm Performance Output: up to ~25?35 cycles/min (depending on product &, operator) Machine Data Year: 1999 Power supply: 400 V / 3-phase / 50 Hz Compressed air: required Machine type: semi-automatic or automatic (depending on configuration) Equipment / Features automatic or manual infeed (configuration dependent) L-sealing frame (angle sealer) integrated or inline shrink tunnel (optional/combined line) adjustable sealing time and temperature conveyor belt system film roll holder with easy loading electronic control panel safety guards and emergency stop quick format changeover suitable for single  ...

Shrink Wrapping machine Minipack Replay 55 Year 2004 Electrical power supply V 200/230 Phase ph 1 Maximum power installed kW 3.15 Hourly output pcs/h 0-300 Available dimensions of the sealing bars mm 540x390 MAX product size mm 500x380x200 MAX Reel Dimensions (diameter) mm 250 MAX Reel Strip Dimensions (width) mm 600 Work Surface Height mm 940 Machine dimensions with the lid open mm 1260x810x1400 Machine dimensions with the lid closed mm 1260x810x1190 Weight (Net/Gross) Kg 105/126

ID3749 Doppstadt Inventhor 9 year/Baujahr 2019 approx. 4.180 hours/hours 32 t Pre-shredder, roller length 3,000 mm Pre-shredder, roller length 3,000 mm

Welding frame dimensions: 560x430mm, max. product dimensions: 520x390x260mm, max. film width: 600mm, max. film roll diameter: 250mm, connected load: 3.7kW, an inspection is possible.

Scissors