130,501 used machines on RESALE, but how to find them? Machine Search
260 cm working width, with Volvo BM mount suitable for L50-L120 wheel loaders (as well as Liebherr, Komatsu etc.)
NEW, - CROCODILE SHOVEL with 2 rear hyd. cylinders, - strong double stiffened hold-down, - 220 cm width, - 0.77 m³ capacity, - 410 kg dead weight, - with Euro mount, photos are only an example!
NEW, opening width 1350 mm, 8 teeth, 385 kg, suitable for Kramer mounting (86.5 cm mounting width), with standard hydraulic couplings, surcharge for plug-in connectors & socket flat sealing: ⬠60, - net, with various mountings suitable for e.g. Euro, Bobcat , Merlo, JCB, Terex, Manitou, Schäfer, Weidemann etc. available
Volvo 4in1 folding shovel, suitable for Volvo L25, 180cm working width
NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit
285 cm working width, suitable for Doosan, Daewoo wheel loaders
VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric
TAURUS shear baler Year 2006 1700 ton cutting force Working hours about 3,500 Side compression force 2x250 longitudinal compression force 150 tons. Machine in very good condition Always serviced and serviced regularly It is sold with its 805 kw Perin generator with a 3000 liter tank
Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment.
An electric guillotine shear L. Schuler (Göppingen) is available. Working width: 1000mm, max. sheet thickness iron/steel: 2.5mm/2mm, flywheel speed: 100rpm, power requirement: 4HP. An on-site inspection is possible.
HUGO BECK high-performance shrink tunnel type SLB 5012/25, pass-through width: 500mm, pass-through height: 230mm, tunnel hood length: 1200mm, working height: adjustable from 850mm +/- 50mm, maximum temperature: 250°C, rod chain conveyor infinitely adjustable from 5 to 30m/min. Inspection possible by appointment.
Machine Fully Automatic Side Welding Machine Profi Packer Manufacturer: Schlichter Type: SCV 400 Pro Year of Make: 2020 Longitudinal welding: continuous Photocells: horizontal and vertical (standard) Compressed air: 6 bar Transport speed per minute: min. 5 meters, max. 30 meters Film core Ø: 76 mm Film rolls max. Ø: 350 mm, with optional folding bracket 700 mm! Film roll width max.: 650 mm Welding punch width: 300 mm Product width min. and max.: 50 mm to 410 mm Min. and max. product height: 1 to 250 mm Product length min. 50 mm, max. unlimited Film thickness: from 7 to 80 mμ Film material: polyolefin fine shrink films, polyethylene, PVC; PLA and other bio films Output per minute: up to approx. 85 cycles Machine dimensions (L x W x H): 2,200 x 1,680 x 1,800 mm Weight: 800 kg Shrink tunnel: Type: SCT 400U Year of Make ...
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Used, working conditions. Dough sheeting machine-
Height=1.6 m, Overall length= 1.6 m, Overall width= 1 m, Suitable for soft dough. Working, good conditions.
Materials: PET, APET, RPET, GRG, GAG, G-PET, PS, PP // Film Width (Max): 700 mm
Output (Packs Per M?Inute): 45 U/min // Type : Barrel
Max. cutting length: 3050 mm Max. sheet thickness: 6 mm steel Controlled backgauge up to 1000 mm Side stop and table extensions Cut edge lighting Hydraulic shear angle adjustment Knife sharpened Weight approx. 6500 kg
used
Safan 2500 x 3 mm Cutting length: 2500 mm Max sheet thickness st 45: 3 mm Max sheet thickness inox: 2 mm
Manufacturer: EuRec Model: Z45E/60 Year of Manufacture: 1997 Power: 160 kW Operating Hours: 34,427 h Find more here - / Contact us at -
An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.
The roll slitter type RKS is well suited for slitting narrow rolls of micro-finishing films, tape qualities as well as light abrasive materials with a roll width up to 620 mm., SWISS QUALITY MANUFACTURING, Roll width up to 320 mm and 620 mm., Unwind station for rolls up to ø750 mm., Shear cut knife system on knife shafts consisting of upper and lower knife., Variable speed drive up to 100 m/min., Rewind station for rolls up to ø500 mm., For light abrasive materials like micro-finishing films, tapes and other special qualities., Unwind station:, Unwind station for rolls up to ø750 mm., Unwinding with pneumatically expandable unwind shaft for cores with ø75 mm., Pneumatically adjustable unwind brake., Cutting system:, Shear cut knife system on knife shafts consisting of upper and lower knife for fast change of cutting width., Rewind station:, Rewind station for rolls up to ø500 mm., R ...
Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.
Manufacturer: SATO Model: DHDS 3100 Year of Manufacture: 2017 Estimated operating hours: 16,000 hours - Plasma cutting system with table and extraction system. - Cutting area: 2 x 6 meters. - Equipped with plasma unit and 2 oxy-fuel torches. Find more here - / Contact us at -
1 LAMPERTI shearing machine type C/L81, year 1988, shearing roller spirals width 200 cm, shearing roller equipped with 24 shearing spirals, entry with metal detector,
Manufacturer: Amada Model: LST 3015-M2 Year of Manufacture: 2011 Power Required: 4 kVA Noise Level: 70 dB(A) Weight: 1950 kg Operating Hours: 30,000 hours Pallet Capacity: - Maximum sheet size: 3050 x 1525 x 25 mm - Maximum load: 920 kg Amada 4 kW laser cutting system including shuttle table and extraction system. Operated in single-shift production, no maintenance backlog. Find more here - / Contact us at -
Drum chipper / chipper / wood shredder Refurbished (Workshop Overhauled) Vecoplan Drum chipper type VTH-55/14/2 Factory overhauled (refurbished) with new bearing (spherical roller bearing), tested rotor and new drive motor Knives and counterknives new Feed width/height: 550 x 140 mm Rotor diameter: 500 mm Feed rollers: 2 pieces Screen perforation: 55 x 55 mm Drive power: 45.0 kW Feed motors: 2 x 3.0 kW Weight: approx. 3,200 kg (approx. 4,000 kg incl. steel construction) Year of manufacture: 1981 / overhauled 2007 Machine colour: RAL 6011 Reseda green Cleavers and counter-knives, new incl. 6 pcs. cleavers, new incl. steel substructure H = 700 mm without electrical installation Drum chippers | Wood chippers | Hacker | Chopping Machine | Wood chipping machine | Shredders | Wood shredder # Vecoplan drum chipper type VTH-55/14/2 refurbished | reconditioned wi ...
Key data: 1000 mm, 18 kN
TC120Bj. 1992 against highest bid Partially overhauled with tools Working area y1000 x2000 with resetting Bosch control with graphics programming Tool Changer 9Stations /2Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Key data: 1300 mm, 22 kN
TC500Bj. 1995 against highest bid Partially overhauled with tools Working area y1300 x2500 with resetting Bosch control with graphics programming Tool Changer 20Stations /3Paws Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
Manufacturer: JENZ Model: NZ 1600 Type of Machine : waste wood shredder Find more here - / Contact us at -
Used shelving rack / TOP CONDITION Manufacturer: SSI SCHAEFER Type: R3000 Condition frame: used / pre-assembled Condition shelves: used Blend 1408 pieces Frame height 2,500mm / depth 600mm / max. bay load 900 kg / galvanized 6400 pieces shelves 1.280x600mm / shelf load 150kg / galvanized 384 pieces of tension cross bandages Quantities are also possible, please ask for your desired quantity Position: 128 x rows of shelves with 10 compartments each. 5 x shelves per field Self-collectors welcome / Free loading / Shipping can be organized nationwide / Please inquire about your transport costs. Errors / prior sale of used goods expressly reserved.
General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: ...
General SKU251M192 LocationBarneveld MakeFluko - Fluid Kotthoff GmbH Essen TypeDMS 3,2/25-20 No.14078-02 Year of construction2005 Main Features MaterialStainless steel Motor11 KW Rotor150 mm Specified Features - Inline mixer MaterialStainless steel 1.4571 (316Ti) Continuous reactorIn-line dispersing machine (1x) Rotor sizesdia. 150mm Inletdia. 50mm Outletdia. 50mm Motor11,0 KW, 400/690 Volt Rotor speed2930 Rpm Information Floorspace1,1x0,5 M Total height0,7 M Weight240 KGInline high shear mixersFlukoMixers > Inline high shear mixersBrand > Fluko What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU212X066 LocationBarneveld MakeArde - Barinco TypeD6000 No.2182 Year of construction2001 Main Features MaterialStainless steel Motor3 KW Rotor90 mm Specified Features - Inline mixer Continuous reactorcheck Rotor sizesDia. 90 mm InletDN200 Number of stages:1 Capacityapprox 20-285 ltr/min Motor3 kW, 400 volt, 1800 rpm With variable speed drivecheck With frequency controllercheck With vesselHopper Vessel sizes600x800x600 mm MaterialStainless steel 1.4401 (316) Information Mounted on framecheck Mounted on wheelscheck Total height2,10 m Weight380 kg With switchgearcheck Floorspace1,40x0,90 m Extra SpecificationsWith vibro motor, 0,35 kW, 220-240/380-415 volt, 1500 rpm. infeed screw conveyor, screw dia. 125 mm, : diaphragma pump Inline high shear mixersArde-BarincoMixers > Inline high shear mixersBrand > Arde-Barinco What you can expect from Foeth: -- ...
Key data: 1500 mm, 22 kN
TC500 Bj.1999 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
used shredder Manufacturer: JENZ Type: AZ 660-168-EL-200kW Year of Make: 2009 Specifications: Insertion opening: approx. 4,500 (3,500 + 1,000) x 1,500 mm Drive power: 200 kW Capacity: approx. 200 m³/h Passage: approx. 660 mm Machine dimensions: approx. 11,250 x 8,000 length x width Machine weight: 18.2 t incl. frame, leak belt and overbelt magnet with bracket More information will follow. Machine will be available around February 2026.
Key data: 1500 mm, 22 kN
TC500 Bj.1998 Partially overhauled with tools Working area y1600 x3000 Bosch control with graphics programming Tool changer 21 stations (with multi-tool up to 60) Further service by us BST - Punching machines possible Invoice with VAT Telephone support at BST - Finnentrop (Sauerland) Attention with us you not only buy a good tested machine, but also the right service
used
Mercodor shredder ZM 44 with a cutting space of 600x380 mm and 7.5 kw drive. Complete ready-to-use machine with large base.
Opening: 850 x 590mm. - Shaft distance: 215mm. - With 15KW E.motor.
With overhauled rotors. Included hydraulic-unit and control panel build in container. With conveyor for outlet.
Included hydraulic-unit and control panel build in container. With conveyor for outlet.
Technical data of the pallet rack stand: Shelving system: Dexion Type: S 4 The scope of delivery includes: 01x Pallet rack stand, used Material colour: sendzimir galvanised Type: H Profile dimensions: 81.7 x 77.21 x 2.5 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) 11,050 mm high 1,100 mm deep Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.
Power: 13 KW clamping range: 500 mm voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Power: 13 KW clamping range: 500 mm voltage: 400 V The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data for the pallet racking system: Shelving system: SLP Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves : 15,480 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 03 pcs. The scope of delivery includes: 06x Pallet rack stand, used Material colour: sendzimir galvanised Profile size: C 80 x 50 x 15 x 3.5 Incl. cross and diagonal struts, Footplates The stands are pre-assembled (welded truss) Height: 5,400 mm Depth: 1,100 mm 30x Pallet rack crossbar, used Material colour: grey IPE profile: 100 x 55 mm Agraffe: 3 HK (hook) Clear width: 3,000 mm 60x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting 24x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Finish: Carbon s ...
Capacity and working area • Minimum dimensions (LxWxH): 600 x 600 x 10 mm. • Maximum dimensions (LxWxH): 1680 x 1830 x 30 mm. • Maximum weight: 250 kg. • Machine opening: 1 - 100 mm. Grinding unit 1 • Contact roller: Ø 280 mm, 70° Shore Ni 37 45. • Main motor: 90 kW . • Speed: 8 - 22 m/sec (frequency controlled). • Direction of rotation: 2 directions of rotation. • Sanding belt dimensions: length 2620 mm x width 2130 mm. • Oscillation: Electronic, adjustable (2130, 1600 or 1380 mm).
maximum number of results exceeded
please refine your search
