sh used for sale

Year 2004 17000 hours Very good condition Find more here - / Contact us at -

engine: diesel engine Cummins B6.7 - Stage 5 (AdBlue) power: approx. 209 kW / 280 hp shafts with 7/7 discs with 5 knives per discs & breaker bar with combs Mobile Hook Lift Frame wheel axle with drawbar hydraulic height adjustment for magnet hydraulic height adjustment for discharge belt water sprinkling system Monitoring Industry 4.0 weight: approx. 20 t

Mechanical Sheet Metal Shears HSK/W Small mechanical slag shears Capacity 1030×2.5mm With electric rear and forward stop With extra knife Can be viewed under power

The JMC 407 is the top seller among our alligator scissors. It is cost-effective, has a sufficient blade length and enough power for most metal recycling tasks. It is suitable for cutting many materials, such as profiles, pipelines, motors, cables or gearbox housings. The shears are also often used for cleaning scrap metal or cutting vehicle radiators. The machine has a control system without electronics and a manually adjustable hold-down device, which also acts as a protective cover. Using the foot pedal, the scissors can be used in single or continuous operation. The opening width can be adjusted using simple clamping screws. The scissors are from our demonstration pool and can of course be viewed or tested. Further information at BPS Recyclinganlagen GmbH at infoRecyclinganlagen.info

Manufacturer: Kuper, Type: ST 1 - 100, Year: 1990, Feeding belt mm: ca 2000, Foil wrapping machine mm: ca 1000, Foil stations: 2, Intermediate transport mm: ca 1500, Year :1990

Manufacturer: Mercodor, Type: ZM 44, Year: 1992, Control: yes, Number of rotors: 2, Number o knifes: 33, kW power rotor: 7,5, Feeding width mm: 500, Feeding hight mm: 650, Length/width/height: 1400x1050x1500, Wight approx. kg: 350, Year :1992

Manufacturer: Schlichter, Type: SCW 14065, Year: 2011, Control: hand, Cycles approx.: 5-8, Schweissrahmenabmessung mm: 1400 X 650, Shrinking tunnel mm: 1400, Outlet conveyor mm: yes, Electrical power shrinking tunnel kW: 18, Heating: elektrisch, Through running hight mm: 350, Working width mm: 800, Folienkern: 900, Folienstärke mu: 8,5-60, Transportsytem: Band, Wight approx. kg: 1000, machine ready for demonstration: yes, Year :12/2011

Manufacturer: Kuper Schrumpffolienanlage Duplex, Year: 1993, Foil wrapping machine mm: 2 Fach, Welding frame dimensions mm: 1500, Intermediate transport mm: 1900, Shrinking tunnel mm: 4600, Outlet conveyor mm: 2500, Total connection value in kW: 65, Foil 1 width mm: 1500, Through running hight mm: 1150 X360 , Required space L x W x H mm: 4600 X 2100 X 1400, Year :1993

Manufacturer: Bat Forum, Year: 2008, Foil stations: yes, Shrinking tunnel mm: 1400, Total connection value in kW: 4, Working width mm: 800, Year :2008

Machine type: MIG/MAG welding machine Make Merkle Type ME 202 LK Connection voltage 3 x 400 volts Adjustment range 30 – 200 amps Duty cycle 20% ED at 200 amps 60% ED at 120 amps Current setting 7 switching levels Cooling transformer by built-in fan Cooling burner gas-cooled Design of mobile compact system Wire feeder 2-roller drive Fuse 10 Ampere Dimensions L x W x H 780 x 360 x 590 mm Weight 62 kg Special accessories for point and interval equipment 2/4-stroke gearshift Age approx. 30 years Condition workshop tested very good incl. UVV test report Scope of supply welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer 1 roll of welding wire 0.8 mm Ø, D 300, 5kg 1 can of non-stick spray 1 piece spare parts box complete Equipped 1 Piece Instructi ...

Manufacturer: Kuper, Type: KFE TAN 2 1600/450, Year: 1979, Control: Kuper, Foil wrapping machine mm: 1600, Foil stations: 1, Welding frame dimensions mm: 1450, Intermediate transport mm: 3.000, Shrinking tunnel mm: 4.800, Schrumpftunnel kW Leistung: 70, Heating: Elektro - 59 kW, Through running hight mm: 200, Working width mm: 800, Conveyour system: Band/Stange, Year :1979

Manufacturer: Costa, Year: 1999, Foil stations: yes, Shrinking tunnel mm: 1700, Year :1999

Manufacturer: Fischer Schrumpffolien Verpackungsanlage, Type: SFV 80, Year: ca.1990, Feeding belt mm: no, Foil wrapping machine mm: yes, Foil stations: 1, Welding frame dimensions mm: ca 140 x 120 , Shrinking tunnel mm: yes, Outlet conveyor mm: no, Schrumpftunnel kW Leistung: ca.30, Heating: elektrisch, Foil 1 width mm: ca.450, Lifting krane: no, Year :ca.1990

Manufacturer: Prodeco, Type: M1, Year: 2012, Number of rotors: 1, kW power rotor: 15, rotor diameter mm: 240, Dimensions of funnel in mm: 1000 x 800, Length/width/height: 1615 x 1000 x 1500, Wight approx. kg: 1080, Year :2012

Manufacturer: Maskiner Verpackungsanlage Laminat, Year: 2001, Cycles approx.: ca.6, Feeding belt mm: 200, Foil wrapping machine mm: Maskiner , Foil stations: 2, Intermediate transport mm: 1500, Shrinking tunnel mm: 3500, Outlet conveyor mm: 2500, Schrumpftunnel kW Leistung: ca.30, Foil 1 width mm: ca max.650 mm, Foil 2 width mm: ca max.650 mm, Through running hight mm: 200, Working width mm: 300, Year :2001

Manufacturer: MSK, Type: 290, Year: 1989, Cycles approx.: max ca. 240 / h, Electrical power shrinking tunnel kW: 366 kW - Gas, Through running hight mm: 2200, Working width mm: 800, Länge max 1200 mm, Year :1989

Manufacturer: Hebrock, Type: AKV 88 F, Year: 1997, Control: hand, Glue application: no, Edgeband thickness max mm: 3,0, Edgeband height max mm: 50, Edgeband thickness max mm: 3,0, Glue system granulate/cartridge: Wärmedusche, Feeding speed min-max m/min: 0-7, Mitre stations: yes, FREE TEXT: Elektronische Eintellung der Kantenlänge, Year :1997

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Manufacturer: Maskiner, Type: LPFK 2P 400 HKM, Year: 1997, Steuerung : Programm, Foil wrapping machine mm: yes, Foil stations: 2, Intermediate conveyor mm: yes, Shrinking tunnel mm: 300, Auslaufband mm: no, Electrical power shrinking tunnel kW: ca 30, Gesamtanschlusswert kW: 30, Foil 1 width mm: variable, Foil 2 width mm: variable, Through running hight mm: 150, Working width mm: 220, Year :1997

Technical data for the pallet racking system: Shelving system: Nedcon Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 19,100 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 24 pcs. Number of pallet spaces per row: 120 pcs. Total number of pallet spaces: 120 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 750 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: creamy white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Column height: 9,000 mm Stand de ...

Qty. 1 Second-hand sheet metal processing machine Mfc.: Vernet Behringer Type: FG2005 CNC Built: 2012 Limits of sheet metal dimensions to be machined Min. section: 100 x 100 x 5 mm Max. section: 2000 x 1000 x 40 mm Max. section: 1340 x 1000 x 60 mm Electrical Cabinet Power supply: 3 x 380 V, 50 Hz, Control voltage: 24 V DC Installed power: 90 kVA Hydraulic unit: 15 l/min Central motor power: 4 kW Medium pressure: 130 bar

Technical data for the pallet racking system: Shelving system: Nedcon Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 10,100 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 60 pcs. Total number of pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: creamy white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Column height: 9,000 mm Stand de ...

The scope of delivery includes: 01x Shelf connectors, used Manufacturer: Stow Type: Pal Rack NS Material colour: sendzimir galvanised Total length: approx. 150 mm Shelf spacing: approx. 150 mm Cross-section: U 35x25 mm Material thickness: approx. 2.00 mm Drill hole diameter: approx. 11 mm Weight: 0.200 kg | Pcs. 02x Screws M10 x 35 mm 02x Nuts M10 04x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x Stand protectors: used Manufacturer: Stow Type: Pal Rack NS Material colour: yellow Total height: 340 mm Suitable for frame profile: 85 mm Side size: 65 x 65 mm Material thickness: 3.00 mm Height deflector: 50 mm Drill hole diameter: 11 mm Drill hole spacing: 200 mm Number of holes: 04 pcs. Incl. mounting material consisting of: 04x Hexagon Bolt M10x35 mm 04x Hexagon Nut M10 08x Washer M10 Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

Technical data for the pallet racking system: Shelving system: Stow Type: Pal Rack NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 18,180 mm Number of levels plus ground level: 03 pcs. The scope of delivery includes: 08x Pallet rack stand, used Material colour: Ral 5015 blue Frame profile: PLFB 12 Profile dimensions: P 85 x 65 x 1.75 mm Incl. cross and diagonal struts, Footplates (120x140x8mm) The stands are pre-assembled ( bolted truss ) 4,500 mm high 1,450 mm deep 08x Stand protectors: used Material colour: yellow Total height: 340 mm Suitable for frame profile: 85 mm Side size: 65 x 65 mm Material thickness: 3.00 mm Height deflector: 50 mm Drill hole diameter: 11 mm Drill hole spacing: 200 mm Number of holes: 04 pcs. 42x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 8 ...

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,190 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack crossbar: Shelving system: Stow Type: Pal Rack NS The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 2004 orange Box profile: 80 x 50 mm Truss Type: PNB0488 Agraffe: 4 HK (hooks) Clear width: 2,500 mm Max. load per pair of trusses 1,000 kg with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Shredder UNTHA RS-100 Main shaft speed: 17.3 rpm Auxiliary shaft speed: 28.0 rpm Chopping discs width: 38 mm Drive power 2x55 kW 400 V, 50 Hz Screen perforation round: Ø 25 mm and 80 mm Total weight without base: approx. 12,000 kg Control cabinet with wiring : complete Incl. funnel + pusher and base frame clean machine, checked, always maintained, 1 owner !

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 17,040 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 06 pcs. Technical data on the volume: Pallet spaces per field: 21 pcs. Number of pallet spaces per row: 189 pcs. Total number of pallet spaces: 189 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 1,100 kg The scope of delivery includes: 10x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P217 Profile dimensions: 120 x 100 x 3.00 mm Incl. cross and diagonal struts, Stand protectors and base plates The stands are pre-assembled ( bolted truss ) Height: 12,00 ...

Spline shaft Grinding machine STANKO 3M451B/1500 with accessories.

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR 600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 160 x 50 mm Truss Type: TRV1-270-160-30 CE Clear width: 2,700 mm Agraffe: 5 HK (hooks) Max. load per pair of trusses 3,400 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery with us

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: Speedlock P90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 130 x 50 mm Truss Type: SLB Agraffe: 5 HK Clear width: 3,500 mm Max. load per pair of trusses 2,500 kg, with the same weight. Distributed load 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 25x balance plate, new suitable for manufacturer: Mecalux Material colour: sendzimir galvanised f. Frame profile: P 101 Material thickness: 1.00 mm Overall width: 155 mm Total depth: 110 mm Hole diameter: 15 mm Number of drill holes: 02 pieces Weight | Pcs.: 0,130 kg Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Technical data of the pallet rack stand: Shelving system: Arestant Type: AS The scope of delivery includes: 01x Pallet rack stand, used Material color: blue Profile dimensions: 80 x 77 x 1.8 mm Incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Height: 4,500 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Greaves VHSD10 High shear disperser Serial: M39998 2019, stainless, high shear disperser with electro hydraulic lift, 7.5Kw, variable speed from 200-1000rpm, timer controls, ideal for mixing into tote bins, 3Ph

Technical data of the pallet rack crossbar: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: yellow Box profile: 116 x 40 mm Truss Type: GNA116x40|SEG5 Agraffe: 5 hooks Clear width: 2,707 mm max. load per pair of trusses 2,400 kg, with the same. distributed load. Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. A more than desired transport or shipment of this item is additional costs, which are charged separately depending on the place of delivery. or scope of delivery can be queried from us.

Nema Thermal Shock Test Chamber -40°C to +120°C Manufacturer: Nema Type: NTS 3000 / 2S Temp. range: -40°C to +120°C Mains voltage: 400 V Rated current: 88 A Nominal power: 55 kW Refrigerant: R 404 A Year of Make: 2000 Weight: 5000 kg External dimensions: W 4000 x D 2760 x H 3450 mm Chamber: W 3000 x D 1250 x H 1610 mm TS-06 More items - new and used - can be found in our shop! International shipping costs on request!

Shuttle kiln for the production of Hand Formers Unit No 5: 5.8m3 shuttle kiln, year 2017, USD 30,700 Unit No 6: 7.7m3 shuttle kiln, year 2018, USD 56,500 Unit No 37: 9.0m3 shuttle kiln, year 2020, USD 74,100 Unit No 24: 7.7m3 shuttle kiln, year 2021, USD 97,700 Unit No 23: 9.0m3 shuttle kiln, year 2021, USD 107,400 For further inquiry, can email to: sywee@topglove.com.my

Technical data of the pallet rack stand: Shelving system: Jung Heinrich Type: Esmena The scope of delivery includes: Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Height: 9,000 mm Depth: 1,100 mm Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Technical data for the pallet racking system: Shelving system: Jung Heinrich Type: Esmena Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 14,135 mm Number of fields per row of shelves: 05 pcs Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 18 pcs. Number of pallet spaces per row: 90 pcs. Total number of pallet spaces: 90 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 800 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: Ral 5019 blue Frame profile: MX630 Profile dimensions: 100 x 81.3 x 1.8 mm System perforation: 50 / 50 mm incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( bolted truss ) Heigh ...

Technical data of the pallet rack crossbar: Shelving system: SSI Schaefer Type: PR600 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: RAL 5010 Gentian Blue Box profile: 110 x 40 mm Truss Type: TRV1-180-114-30 CE Agraffe: 5 HK (hooks) Clear width: approx. 1,800 mm Max. load per pair of trusses 3,500 kg, with the same weight. distributed load. 02x Locking pins, used Design: compl. galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

for walking complete shafts, left and right

We offer roller shells made of chilled cast iron, nodular cast iron and chrome steel. The production is carried out according to your technical requirements and drawings. Of course, the corresponding certificates will be provided.

Manufacturer: Beyeler Model: CC 5150X25 E Year of Manufacture: 1980 Type of Machine: Hydraulic Guillotine Shear Material Thickness Capacity: 25 mm Weight: ~48,000 kg Dimensions (LxWxH): 6.5 m x 4 m x 3.5 m Find more here - / Contact us at -

Two-digit, right / left

Max. sheet thickness: 2 mm steel Max. blank diameter: 1000 mm Motorized drive via foot switch

Technical data for the pallet racking system: Shelving system: SSI Schaefer Type: PR 600 Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 11,500 mm Number of fields per row of shelves: 06 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 72 pcs. Total number of pallet spaces: 72 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): approx. 1,250 kg The scope of delivery includes: 07x Pallet rack stand, used Material colour: sendzimir galvanised Stand Type: P173 Profile dimensions: 100 x 75 x 2.00 mm System perforation: 50 / 50 mm Incl. cross and diagonal struts, and footplates The stands are pre-assembled (screwed truss) Hei ...