sf used for sale

Sawing, milling, drilling and dowel inserting machine Koch type SFBD-B Universal + BL25 Specifications: Machine working :d the top side in continuous with additional: 4 drilling supports vertically from above 4 drilling supports: horizontal from the back Aggregates: tiltable Workpiece length (mm): 330 - 2500 Workpiece width (mm): 40 - 180 (200 mm for straight cut) Workpiece thickness (mm): 15 - 80 mm Dowel (mm): 8 + 10 + 12 x 30 + 40 + 50 Dowel extension (mm): 10 - 25  Machine dimension: Length (mm): 8040 Width (mm): 5850 Height (mm): 2500

Table milling machine BÃERLE SFM -used-planed grey cast iron table, finely adjustable milling fence, clockwise/counterclockwise rotation---------- Technical data ----------Table size: 1100 x920 mm, work table height: 830 mm, spindle diameter: 30 mm, speeds: 2,800,4,500,5,600,6,000,9,000,12,000 rpm.

Stock shape glue + press belt, Type: SFAM 712_G, Year: 1995, Max.Size: 1650mm, Pressband Tünkers, Type: SFAM 712_G

Roller conveyor with drive SFB conveyor technology type ITF / R-KT 50Roller conveyor with driven carrier rollers, roller conveyorMachine- No: 201800954/2 Year of construction 2019Roller conveyor length: 2000 mmUsable roller width: 500 mmRoller diameter: 50 mmNumber of rollers: 21 piecesRoller spacing: 100 mmConveyor speed: approx. 8 meters/minMotor power: 0.12 kWNet connection: 400 volts, 50 Hz- chain drive via SEW gear motor- all rollers driven with freewheel in both directions- ball-bearing steel rollers- Frame profile made of 3 mm U-steel with

Sanding width: 200mm, sanding length: 600mm, adjustment path X/Y: 690mm/230mm, clamping table spindle center distance: 500mm, sanding wheel diameter: 200mm, sanding wheel width: 20mm, bore: 51mm, table dimensions X/Y: 200mm/600mm, max. table load: 110kp, machine dimensions X/Y/Z: approx. 3000mm/1600mm/2100mm, weight: approx. 1300kg. Documentation available. On-site inspection is possible.

pulling force - max.: 0 t dayligth: 0 mm wire dia.: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Compression & tension spring tester 5 kN The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MOBILE MIXER-MINCER, WOLFKING TYPE: SFG 150/100 + PORTIONER TYPE: PD200 Technical description: Material: Stainless Steel Mixer, type: SFG 150/100 Serial number: 59440, year: 1998 Power supply: 380 V, 50 Hz, 7.8 / 9 A, 3.7 / 4.4 kW Weight: 350 kg Outlet diameter: ?100 mm Mixer mill size: 1310 x 600 x 1500 mm Foot control Portioner, type: PD 200 Serial number: 59441, year: 1998 Power supply: 220 V, 50 Hz, 0,4 A, 35 kW Weight: 100 kg Band width: 200 mm Working width: 180 mm Dimensions: 1300 x 600 x 1140 mm

A semi-automatic mobile stretch wrapping machine is available. Pallet dimensions X/Y min.: 600mm/600mm, max. packaging output: 65m/min, wrapping height: 2000mm, max. film carriage speed: 5.4m/min, total output: 0.55kW, output: 35 pallets/h. The battery is defective. Documentation available. On-site inspection is possible.

An Atlas Copco oil-free compressor is available.Technology: oil-free scroll compression, max. operating pressure: 7.8bar, volume flow: 13.4l/s or 48.2m³/h, motor power: 7.4kW, speed: 2885rpm, machine dimensions X/Y/Z: approx. 1600mm/750mm/1850mm, machine weight: approx. 400kg.

An Eickmeyer flat printing machine with parallel lifting upper frame is available. Printing format X/Y: 500mm/800mm, max. screen frame dimensions X/Y/Z: 1050mm/520mm/30mm, max. workpiece height: approx. 140mm, operating hours: approx. 50h. Documentation available. On-site inspection is possible.

Manufacturer : MKW Model : 50/SFT 350 Short Description: Stitcher

Two almost identical Still pallet trucks are available. Load capacity: 2000kg, drive: electric, drive power: 2.3kW, max. battery capacity: 375Ah, lifting height: 2110mm, wheelbase: 1518mm, tire type: polyurethane, fork length: 1150mm. Machine dimensions X/Y/Z: approx. 2100mm/720mm/1300mm, weight: approx. 1100kg, operating hours 1/2: 4472h/4904h. Documentation available. On-site inspection is possible.

Horizontally working filling and sealing machine forming, filling and sealing pouches, cam driven, intermittend in line working machine to fill (1 station) and handle pouches (flat, stand-up, with/without zipper), integration of various fillling systems possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). SIEMENS-PLC, -Touchscreen and -Frequency Converter, Sensors from OMRON, SMC and FESTO. Low volt eletrical parts from SCHNEIDER, OMRON temperature controller. FESTO pneumatic components. All product contacting parts made of stainless steel (SS304). - Specifications: pouch sizes: L(140-280)xW(85-210)mm | max. pouch deepth: 80mm | max. speed of the machine in neutral: 60 cycles/min | bag magazine | stainless steel | 380V, 7.0kW | 0.5m? air, 6bar | maschine dimensions (without filling system): L5927xW1317xH1942mm | weight net/gross: 1600/1800kg. Optional availa ...

A screen printing system including a feed table with XY adjustment is available. Printing area: 800mm/500mm, max. print object height: 160mm, max. frame dimensions X/Y/Z: 1290mm/760mm/40mm, max. printing speed: 500 prints/h, machine dimensions X/Y/Z: approx. 1700mm/1100mm/2000mm, weight: approx. 450kg. Documentation available. An on-site inspection is possible.

Stapellift  / Stack Lift Polar SFA-3 Baujahr / Year 2001 - Serial-No. 7177002 Tragfähigkeit / Carrying apacity max. 1000kg Lichtschranke / Light barrier Sehr guter Zustand / Very good condition

• Suppository production line for prefabricated plastic cast packaging • Working direction from right to left • Output max. 10,500 suppositories/h • Material of cast packaging PVC/PE, PS/PE, PVC/PVDC/PE • Dimensions of pouring packages: Container spacing 17.3 mm (pitch), container height 44-51 mm depending on format tools, standard version. • Casting packaging Roll material printed and unprinted, roll diam. 500 mm, pick-up diam. min. 100 mm • Available format parts for container heights 44 mm (1.1 g) and 51 mm (2 g) • Polystar 100 GE film sealing device for sealing the film ends • Contactor control • Drive 400V/50Hz Line consisting of: Filling machine Citopac SFD-10 CP • 2 filling stations, distance 17,3 mm • -osing range per filling point 0.5-3.5 ml • Dosing via heatable intermediate container 0.3 l and heatable tap head with rotary slide control (3 each a ...

Key data: 1200 KW, 2000 kVA, 5200 V

Generators in Excellent condition. Make: Guascor Model: SF480TALG Mfg year: 2011 Alternator: WEG Power: 2000 kVA / 1200 kW Voltage: 5200 V Speed: 1800 RPM Frequency: 60 Hz Qty: 2 Low working hours

Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let's explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Ro ...

Screw compressor Kaeser type DSG 290-2 SFC A Properties: Type DSG 290-2 SFC A Order no. 4500217106 Length 3450 mm Width 1800 mm Total height 2400 mm Material No. DSG2.3 Manufacturer Serial No. 1117 Rated power 200.0 kW Speed 2982 min ̄¹ Max. operating overpressure 8.5 bar Ab. Ambient temperature min./ max. 3/40 °C

- 3 chuck 1200 mm - Heidenhain Digital read out syhstem X / Z Axis - Feeds in 2 directions - Multi fix Tool systems with inserts

Overview This carbonator from Italian Manufacturer Sfoggia was built in 2019. It has had very little use and is in immaculate condition.   Technical Details Capacity: 2,500 litres per hour Products that can be processed: beer, cider, soft drinks etc. Max. carbonation levels - max pressure: 6 bar Dimensions (LxWxH): 1000mm x 820mm x 2100 mm Weight: 150 kg

The Sidel FM 100 is a filling line specifically designed for still water, offering automated solutions for high-efficiency bottling. Here are some key features and benefits:, - Flexibility: The FM 100 can handle various bottle sizes and shapes, making it adaptable for different products and market needs., - Efficiency: The filling technology minimizes product waste and ensures a consistent fill volume, which is essential for quality control., - Automated Processes: The line incorporates automated processes for bottle handling, rinsing, filling, capping, and labeling, resulting in a streamlined production line and reduced labor costs., - Sanitization: The FM 100 is designed with hygiene in mind, featuring materials and designs that facilitate cleaning and sanitization, which is critical for food and beverage applications., - Speed: The line is capable of handling high throughput, allowing ...

Rated power: 75kW, max. operating overpressure: 8.5bar, speed: 3000rpm, operating hours: 75122h, load hours: 72719h. The machine requires bearing replacement. Documentation available. An on-site inspection is possible.

Height=1.6 m, Overall length= 1.3 m, Overall width= 0.8 m, Net weight= 290 kg,

Lathe Schütte SF 26 BJ 1985

grinding length: 6000 mm grinding width: 2200 mm workpiece height: 2000 mm column daylight: mm table surface area: 6000 x 2200 mm table speed -stepless-: 2 - 50 m/min workpiece weight: 15 t adjustment speed of cross-rail: 560 mm/min grind. wheel dimensions for face grinding: 63...200 mm grind. wheel dimensions for peripheral grind.: 315x50x76 mm grind. wheel dimensions for peripheral grind.: 400x40x127 mm adjustment range - horizontal: 500 mm swival range +/-: 60 ° total power requirement: 86 kW total wight: 130 t dimensions of the machine ca.: 22x7x4 m weight of the machine ca.: 56 t - Digital Read Out The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dough dividing machine KÖNIG, type: Artisan SFC Compact machine for the production of square pastries with a high product variety thanks to interchangeable cutting rollers and punching tools. - Incl. 3 cutting rollers for longitudinal cutting - Incl. 2 cutting tools for the cross-section - Doughs up to a TA of 180 possible - Extremely gentle dough processing - Belt speed adjustment - Machine in stainless steel - Condition: Very good, ready to use - Everything technically checked and machine cleaned Capacity: up to 300 kg/h, at TA 180 Dough belt width: up to 170 mm Speed: max. 1.5m/min. EL. Connection: 3x 380-415 V, 50 Hz, 0.6 kW, 4.0 A Other punching tools are optionally available from KÖNIG: -Square -Heart - Crisp fresh -Quitting time -Rhombus The machine is in very good condition and is ready for immediate use. Visits and test runs are possible by arrang ...

Two compressors Kaeser are available. 1) Kaeser CSD 102 T SFC, year of manufacture: 2002, rated power: 55kW, max. operating pressure: 8.5bar, refrigerant: R134a, refrigerant quantity: 3.1kg, operating hours: approx. 132150h, load hours: approx. 129858h. 2) Kaeser BS 61, year of manufacture: 2001, rated power: 31kW, max. operating pressure: 8bar, operating hours: 91889h, load hours: 78711h. Documentation available. An on-site inspection is possible.

Size : 3.000 x 1.950mm. - With 2 Pcs. Friedrich unbalance motors of 2KW each. - Included: Frame with rubbers springs and springs

Cutting table SEEWER RONOD, type: SFT 362, A23 -refurbished- - Cutting table for pastries - Cutting section - with some cutting blades and cutting rollers -Reel More information on request. Visits and test runs are possible by arrangement.

Dimensions (L/W/H): 4630x3005x2334 mm Weight: 12160 kg Total power requirement: 135,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Very good surface grinding machine Table surface / working area 200 x 600 mm

Tenoning spindle: 1 St. Number of milling agregates: 0 St. Spindle diameter: 40 mm Small window production consisting of: W. -------------------------------------------------- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tool for the Haberkorn and Okoma machines Wooden windows 1 set IV 68/78/88 and 1 set wooden aluminium windows IV 68/78 built in 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings -------------------------------------------------- Technical manufacturers description: - Haberkorn FZS1 slotting machine with automatic feed, -stepless height adjustment D 40 mm Cutting-to-length saw: -Spindle arrangement: top -Three-phase motor: 3 kW -Spindle diameter: 30 mm -Speed: 2800 rpm -Saw blade diameter: 400 mm -Automatic brake with speed monitoring -Horizontal pneumatic positioning, manually adjustable  ...

Technical data: - min . Drilling diameter 16 mm - Max. drilling diameter 35 mm - Boring diameter 65 mm - Max. drilling depth 1,400 mm in the ELB / BTA method - Machine space requirement approx. 6100 x 3100 mm - max. height of the machine 2400 mm - 2 separate drilling units, built on a basic machine bed spindle spacing 600 mm - Flat web guides - Feed drive via ball screw and feed gear - Rapid traverse speed 4000 mm/min. - Feed speed max. 230 mm/min. - Drive power 2 pieces drilling spindle 11 kw - Speed infinitely variable max. 6000 rpm - Hydr. Attachable tailstock with counter-rotation - Tailstock can be moved manually on base plate with length grooves - Cladding with sliding doors - 1 piece of bezel each - 1 piece each rotating tension bell holder Basic recording - 2 pieces of pre-centering each - Drilling depth control via cam and limit switch - CNC control SFT and  ...

A CNC multi-spindle lathe Schütte is available. Number of spindles: 6, cross slides: 2, bar length: 3000mm, max. bar diameter: 20mm, max. square material side size: 14mm, max. hexagonal material side size: 17mm, max. turning length: 40mm, speed: 5000rpm. Machine dimensions X/Y/Z: approx. 3150mm/1050mm/2000mm, weight: approx. 4000kg. Including loading magazine, all collets and accessories. Documentation available. An on-site inspection is possible.

-Manufacturer: Seewer AG -Model: SFT 262,+ 23 -with 2 cutting rollers band is renewed -Mobile on castors

Wölfer 90 kw Model: MDRKZF 280M-6/7 (SFB100/130FU) Serial No.: 492560 Type: 3~ AC Motor Year: 2014 Voltage: 0-690/690 V Current: 94/90 A Frequency: 0-50/150 Hz Speed: 0-986/2958 rpm Duty type: S3 – 100 % Power factor (cos φ): 0.85 / 0.91 Protection class: IP 56 Insulation class: F Mounting type: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB100/130FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 910 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port

The machine is completely overhauled and therefore as good as new! Technical data Drilling method: Lip drilling Number of spindles 1 Drilling range in steel D= 1-6 mm Drilling depth 400 mm Max. workpiece length 400 mm Manufacturer: TBT / SFT New electrics and new CNC control Siemens! We see ourselves as a competent partner in the field of deep hole drilling. You are also welcome to send us inquiries in the contract processing of deep hole drilling work.

Model: wölfer 250bkw MDRKF 315X-4 SFB160FUT Serial No.: 192558 Type: 3-phase AC Motor Year: 2014 Voltage: 0-690 V / 690 Y Power: 250 kW Frequency: 50 / 100 Hz Speed: 0-1492 / 2983 rpm Current: 240 / 233 A Power factor (cos φ): 0.91 / 0.94 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB160FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Weight: 1650 kg Standard: EN 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Model: wölfer 175 kw MDRKF 315L-4 SFB160FUT Serial No.: 192557 Type: 3-phase AC Motor Year: 2014 Voltage: 690 V / 690 Y Power: 175 kW / 175 kW Frequency: 50 / 100 Hz Current: 170 / 145 A Speed: 1486 / 2973 rpm Power factor (cos φ): 0.92 / 0.95 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B5 (flange-mounted) Ambient temperature: – 25 °C to + 45 °C Blower: 380 V 50 Hz / 440 V 60 Hz Brake: SFB160FU – 110 V DC Encoder: POG 10 N 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 1380 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

used dough sheeter Rondo Doge SFS 611 for sale and immediately available in our warehouse in Bielefeld. Manufacturer : Seewer AG Burgdorf Dough Sheeter Rondo Doge SFS 611 -with new ribbons -with automatic reel -with automatic flour shaker -with digital control -Built in 1999 -Stainless steel -Mobile on castors with parking brake

width of the strips: / mm band length: / mm band speed: / m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Blowing machine SIPA type SFR EVO3 capacity: 18.000 bph - 0,5 ltr., 1,0 ltr., 1,5 ltr. year of manufacturing: 2017 neck type: PCO 28 - 1810 with 8 cavities incl. preform feeding system incl. preform cooling system Min. - Max. bottle diameter (diagonal): 50 - 125 mm Min. - Max. bottle height (without neck): 80 - 349 mm without high pressure compressor The machine is still in production until the beginning of February 2026.

Hardened precision steel bar guided sliding aluminium table. Parallel fence with micrometric fine adjustment. Sawblade tiltable up to 45° with hand wheel. eccentric clamp, stable outrigger table for working heavy plates with degree raster Mitre fence 1400 mm with 2 end stops, integral fence 500 mm Circular saw: max sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallelfence 850 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 3,8 kW S6 (3 Kw S1) dust collector inlet 120 mm length of sliding table 2000 mm Spindle moulder: spindle diameter 30 mm spindle travel 160 mm spindle speeds 8000/6000/3500/1500 engine power 3,8 kW S6 (3 Kw S1) weight 520 kg

Hardened precision steel bar guided sliding aluminium table Parallel fence with micrometric fine adjustment. Sawblade and milling spindle immersible below the table. Telescopic fence 1800 mm with two flip stops. Stable outrigger table for working heavy plates. With own motor for the scoring unit for an easy deactivation Technical Data: Circular saw: max. sawblade diameter 315 mm spindle diameter 30 mm max. cutting width at parallel f. 1100 mm max. cutting height, 90°/45° 103 mm/72 mm engine power 5 kW S6 (4kW S1) suction diameter 120 mm Spindle shaper: spindle diameter 30 mm spindle tilt 90°/45° spindle travel 175 mm spindle speed 10000/8000/6000/5000/4000/3000 engine power 5 kW S6 (4kW S1) weight 790 kg incl accessories: Sliding table length 2300 mm, scoring unit 4 kW motor, integral fence 500 mm, upper suction, degree raster at outrigger table.

Operating hours: 70792 h Equipment / Additional information: The compressor is water-cooled and has heat recovery. Rated power: 160.0 kW Motor speed: 1500 rpm Max. operating pressure: 8.5 bar Ambient temperature: 3°C/45°C

Schütte SF51 6-spindle bar machine Suitable for complex turning operations in metalworking The Schütte SF 51 is a proven, cam-controlled 6-spindle bar machine with 51 mm spindle passage, ideal for the efficient series production of turned parts. These robust machines feature an electronic cam switch that provides high process stability and flexibility in turning, drilling, and tapping. The machine is appreciated for its stability and flexibility in the production of demanding workpieces Manufacturer: Schütte Type: SF 51 Cam-controlled multi-spindle bar machine Number of spindles: 6 main spindles Control: Conventional Spindle passage: 51 mm Feed max. 125 mm Turning length max. 102 mm Drilling depth max. 102 mm Tapping device Chip conveyor 6-fold loading magazine Voltage: 400 V Year of Make: 1979 Dismantling and removal by buyers Dismantling also possibl ...