setter used for sale

Haas ST 30 Y CNC Lathe with very low working hour Cycle time of 3800 hours, so it is relatively new machine. It has turret with BMT65 holders. Machine in full spec; Part catcher Tailstock Renishaw tool setter 20 bar high pressure coolant Cool cabinet for electro wardrobe 3 pieces fixed axial tool holder BMT65 3 pieces fixed radial tool holder BMT65 Only 4000 working hours, yom. 2019 VPS(active visual programming system) NGC new generation of numeric control 10“ jaw chuck Machine is working under power in full capacity.

Manufacturer DOOSAN Model PUMA 3100L Year / Month 2013 / 07 CNC FANUC i SERIES Capacities Ø Swing over bed 850 mm. Ø over front door 720 mm. Ø swing over cross-slide 670 mm Max turning diameter 525 mm. Max turning length 1280 mm. Chuck size 12.5” Bar working diameter 102 mm. Travels and feedrates X travel 293 mm. Z travel 1.280 mm. Rapid traverse rate X/ Z Axis 30 m/min. Main spindle Max spindle speed 2.800 rpm Speed ranges 2 Main spindle power 22 kW Main spindle torque 6.605 Nm Spidle nose A2 – 11 Turret No of tool stations 10 Turret tool size 25 x 25 mm Max boring bar size 50 mm. Indexing Time 0,15 s Tailstock Quill diameter 100 mm Quill travel 100 mm Quill bore taper MT#5 Equipment Chip conveyor INCLUDED 3 Jaw-Hydraulic chuck Ø315 mm INCLUDED Automatic Tool pre-setter INCLUDED Hydraulic steady rest SMW Autoblock SLU-X-3.2-MS Others T ...

Key data: 420 mm, 1250 mm, 3500 1/min

Stock number: 3859 CNC LATHE Manufacturer: OKUMA, Type: LB 25 II x 1250 Machine NO.: 0202, Year of manufacture: 1995 Specifications: Max. circulation diameter 420 mm dia. Max. turn. About Bed 620 mm Dia. Turning length 1250 mm Main spindle speed range 65-3500 rpm Bore through drawing tube 73 mm dia. Spindle bore 80 mm dia. X axis movement 300 mm Z Ash Movement 1275 mm Tool turret with 12 stations Control OSP 7000 Fabr. Operating hours Spindle 16987 - New spindel bearings at 14.500 hours Hours Accessories: Hydr. Chuck Main Spindle Kitagawa B-212 - 12" mm dia Various tool holders. 12 Tool setter Hydraulic tailstock. Length: 4250 mm, Height: 2150 mm, Width: 2200 mm, Weight: 7400 kg

turning diameter: 500 mm centre distance: 800 mm control: 840D SolutionLine Siemens swing diameter: 690 mm Main spindle:: Max. rpm: 3.200 min/-1 power capacity - main spindel: 28/35 kW Torque: 175/875 Nm spindle nose: DIN 55026 / A11 max. usable bar diameter: 110 mm C-Axis: 0,001 ° Subspindle:: Max. rpm: 4.000 min/-1 max. Torque: 95 / 113 Nm spindle nose: A6 max. usable bar diameter: 52 mm C-Axis: 0,001 ° turret:: number of toolpositions: 12 pos. tool taper: VDI 50 DIN69880 Number of driven toolspositions: 12 pos. axis stroke:: x-axis: 360 mm y-axis: 120 (-55/+65) mm z-axis: 980 mm C-Axis: 360 ° total power requirement: - kW weight of the machine ca.: 9,1 t dimensions of the machine ca.: 4,3 x 3,0 x 2,5 m Documents: Chip conveyor: Coolantsystem: high pressure coolant: 15 bar Subspindle: bar feeder interface: Turret: Tool drive mechanisum: C-axis: 2x Y-axis: hollow chuck un ...

Manufacturer DAEWOO Model PUMA 2000 SY Year 2003 CNC FANUC 18i – T Capacities Swing over bed 600 mm. Swing over saddle 550 mm. Max. turning diameter 330 mm. Max. turning length 510 mm. Travels and feeds X Axis Traverse 250 mm. Z Axis Traverse 580 mm. Y Axis Traverse 100 (±50) mm. B Axis Traverse 580 mm. Rapid feed X Axis 20 m/min. Rapid feed Z axis 24 m/min. Rapid Traverse Y 7,5 m/min Rapid Traverse B 20 m/min. Main Spindle C Axis INCLUDED C Axis index 0.001 º Through hole Ø 76 mm Nose A2#6 Main Spindle Speed Ranges 4.500 rpm. Main Spindle motor power 15 kW Sub-spindle C Axis in sub-Spindle INCLUDED C Axis index 0.001º Sub Spindle through hole Ø 45 mm Sub Spindle Speed Ranges 6.000 rpm Sub Spindle motor power 7.5 kW Turret and driven tools Nº of Station 12 Tool Size 25 mm Turret Indexing Time 0.1 s Living Tool Speed 5.000 rpm. Rotary tool  ...

Year of construction: 1993 Condition: good (used) Turning diameter over face slide: 530 mm Turning length: 850 mm Turning diameter: 450 mm Spindle bore: 80 mm Motor power: 30,000 W Spindle speed (max.): 3,000 rpm Spindle speed (min.): 10 rpm X-axis travel: 330 mm Z-axis travel: 850 mm Main spindle drive power: 30,000 W Total height: 180 cm Equipment: Documentation/Manual Okuma LB35 II M, OSP 5020LG, tailstock, touch setter, suction, coolant pump 8 bar, chip conveyor, in good condition in relation to age, very little spindle hours and very well maintained. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. Caa ...

turning diameter: 240 mm turning length: 500 mm control: Sinumerik 840 D sl Celos swing diameter: max. 510 mm Main spindle:: turning speed range - main spindle: max. 5.500 min/-1 power capacity - main spindel: 14 / 13 kW max. Torque: 192 / 172 Nm inner draw tube diameter: 66 mm C-Axis: 0,001 ° spindle diameter in front bearing: 100 mm max. chucking diameter: 215 mm spindle nose: 140H5 turret:: number of toolpositions: 12 pos. Number of driven toolspositions: 12 pos. tool taper: VDI 30 Spindle speed - driven tool stations: max. 5.000 min -1 power capacity - driven tool-stations: 5,4 kW max. Torque: 18 Nm y-axis: +/- 40 mm axis stroke:: x-axis: 210 mm y-axis: (+/- 40) 80 mm z-axis: 525 mm feeds:: rapid traverse ( X / Y / Z ): 30 / 22,5 / 30 m/min Feed force ( X / Y / Z ): 4,5 / 4,5 / 7,5 kN total power requirement: 20 kVA weight of the machine ca.: 4,3 t dimensions of the machine ca.: ...

Year of construction: 2009 Condition: good (used) Turning length: 1,000 mm Turning diameter: 650 mm Equipment: Documentation/Manual Okuma LU-45 MC-1000, control OSP P200L, turning length 1000 mm, double turret VDI50, A-turret with driven tools 12 pieces, B-turret 10 tool positions, tailstock, touch setter, gradation for oil mist, door automatic, belt filter system with coolant cooling, tool package Footprint 4800 x 3400 mm Delivery: free loaded truck 100% payment before loading upon invoicing. Neff The Okuma Specialist and NeffBuy In addition, we will be happy to provide you with the all-round carefree package, inspection in our showroom (30 Okuma machines) including demonstration and acceptance, loading, transport, assembly and commissioning of the machine as well as a briefing and subsequent service. We operate Okuma CNC service throughout Europe both electronically  ...

Key data: 430 mm, 744 mm

Turning-milling center Manufacturer : Emco Type: Hyperturn 665 Plus Power Mill Control : Siemens Year of construction : 2006 Duty on hours : 56000 h Spindle hours : 22722 h Availability: Workspace Circulation diameter over bed 600 mm Circulation diameter over face carriage 500 mm Distance between the two spindle lugs 975 mm Max. turning diameter 430 mm Max. part length 744 mm Max. bar diameter 65 (76.2) mm Travel range Travel X/X2 280/205 mm Travel Z/Z2/Z3 900/750/750 mm Travel Y 100 (+/–50) mm Main spindle Speed range (infinitely adjustable) 0 – 5000 (4000) rpm Torque max. 250 Nm Spindle connection DIN 55026 A2-6 (A2-8) Spindle diameter in front bearing 105 (130) mm Spindle bore (without tension tube) Ø 73 (86) mm Counter spindle Speed range (infinitely adjustable) 0 – 7000 rpm Torque max. 130 Nm Spindle connection DIN 55026 A2-6 Spindle diame ...

- Control FANUC 31i - model B - Machine hours Control on: 26,400 h Spindle: 4,896 h - 12-speed revolver - 8-speed turret - No driven tools - max rotational diameter 255 mm - max. rod diameter 76 mm -Tailstock - Bar Feeder Interface - Scraper tape conveyor LNS -Auto. Tool Setter - Coolant pump 10 bar, 30 l/min Machine weight 7,000 kg

x-travel: 1120 mm y-travel: 510 mm z-travel: 510 mm control: Mazatrol 640 M table surface area: 1460 x 510 mm table load: 0,8 t rapid traverse: 36 m/min turning speed range: 40- 12000 U/min power capacity - milling spindle: 18,5 kW tool taper: SK 40 | | no. of tools in the magazine: 30 Stück weight of the machine ca.: 7,53 t dimensions: 3,4 x 2,85 x 2,8 m Vertical Machining Center traveling coloumn - internal coolant 15 bar - chipconveyor - 4th axis - tool setter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 310 mm, 520 mm

Machine type: CNC turning and milling center Manufacturer : EMCO Type EmcoTurn E65 Year of construction 2007 Control Sinumerik 810 D Siemens Storage location Sweden Country of origin: Austria Delivery time by arrangement Cargo Base EXW Technical description Travel: X-axis : 210 mm Z-axis : 610 mm C-axis : 360° max. oscillating diameter above bed : 540 mm max. oscillating diameter over face slide: 360 mm max. turning diameter : 310 mm max. turning length: 520 mm max. rod diameter 65 mm Center width: 650 mm Main Spindle: Speed range - main spindle 60 - 4,200 min/-1 Drive power - main spindle 18 / 15 kW Max. torque 192 Nm Spindle head DIN 55026 / KK6 C-axis 0.001° Tool turret: 12 positions Tool holder VDI 30 DIN 69880 Driven tool stations: Number of driven tool stations 12 pos. Speed range - addressed Tool stations 0 - 5,000 min -1 Drive power ma ...

Lid placing machine, make Laue Engineering, year 2018, used for tin cans with a diameter of 127 mm (dried milk), Slip lid with integrated spoon (10 ml), Consisting of:, can conveyor, for the supply of the cans, feed generation in front of the separation station and transfer of the finished article (can with lid)., execution: Welded frame made of stainless steel with Intralox conveyor belt, drive motor, feed star and goods security, cover conveyor: Feeding of the lids to the lid placer, execution: Welded stainless steel frame with Intralox conveyor belt, drive motor and article surveillance, lid setter: Separation, positioning and joining of cans and lids, return of finished part to can conveyor, execution: Welded frame made of stainless steel with carousel (8 stations), drive motor and goods security and complete cladding; switch cabinet, Destacker: Lid magazine and lid feeding on lid co ...

x-travel: 635 mm y-travel: 510 mm z-travel: 460 mm control: Siemens ergoline table surface area: 2x 790 x 560 mm number of pallets: 2 rapid traverse: 30 m/min turning speed range: 8000 U/min power capacity - milling spindle: 13 kW no. of tools in the magazine: 30 Stück tool taper: SK 40 | | weight: 5,2 t dimensions: 3,1 x 2,1 x 2,7 m vertical machining centre wit 2x palettchanger, Equipment: - 2x palettchanger - chipconveyor - internal coolant - filter system - ext. hand wheel - laser tool setter - cableless 3D probe - oil dust collector - Siemens ShopMill dialog programming - Roto Clean - signal lamp - spindle oil cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel:8500 mm y-travel:4300 mm z-travel:1066 mm distance spindle nose and clamping angle:300-1366 mm distance between columns:3500 mm table-size:8000x3100 mm table load:30000 kg spindle taper:50 BT spindle speed:vertikal: 6000 1/min; horizontal: 2000 1/min spindle drive:30 kW Tool changer:60 CNC controller:Siemens 840 Scales:von Heidenhain in allen 3 Achsen automatic tool changer:Vertikal/Horizontal 60- fach Tool setter:von RENISHAW TS-27 fully enclosed:(oben offen) Automatic head changer 4 positions:inkl.90° Kopf & Verlängerung

x-travel:1050 mm y-travel:600 mm z-travel:530 mm table-size:1100x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:10000 1/min spindle taper:40 BT oder SK spindle drive:11/15 kW Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (angrenz. leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t automatic tool changer:30 fach Tool setter:Option inner coolant:20 bar CNC controller:FANUC 0i-M + MANUAL GUIDE i FUNCTION + 10.4" LCD MONITOR control cabinet Siemens PLC:getrennter Schrank f. Hoch- und Niederspannung autom. lube system:von LHL Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD MONITOR. Our Taiwanese supplier is th ...

x-travel:850 mm y-travel:600 mm z-travel:530 mm table-size:950x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:8000 1/min spindle taper:40 BT spindle drive:15 kW Tool changer:24 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2870x2200x2810 mm weight of the machine ca.:6,3 t CNC controller:Fanuc 0i MD + MANUAL GUIDE i FUNCTION + 10.4" LCD MONITOR automatic tool changer:24 fach Metric, 400V 50Hz 3 Phase:mit Trafo Tool setter:Option von BLUM oder Renishaw inner coolant:Vorbereitung: ohne Pumpe, ohne Filter, ohne Tank (gegen Mehrpreis) Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD MONITOR. Our Taiwanese supplier is the lar ...

x-travel:1020 mm y-travel:510 mm z-travel:600 mm table-size:1070x510 mm T-slots:18x5 (Breite x Anz.) mm max. table load:500 kg distance spindle center to table:100-700 mm rapid traverse in x-y-z axis:36/36/36 mm milling feed range:1-12.000 mm/min spindle speed:15.000 (direkt) 1/min spindle taper:40 BBT oder SK spindle drive:14.6 kw Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) oder FANUC coolant system:mit 320l Tank automatic tool changer:30 fach Tool setter:Option inner coolant:20 bar mit Filtersystem chip conveyor - auger:im Maschinenbett Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD MONITOR. Our Taiwanese supplier is the largest manufacturer in T ...

x-travel:820 mm y-travel:510 mm z-travel:535 mm table-size:900 X 510 mm T-slots:18x5 (Breite x Anz.) mm max. table load:500 kg distance spindle center to table:100-635 mm rapid traverse in x-y-z axis:48/48/36 mm milling feed range:1-12.000 mm/min spindle speed:15.000 (direkt) 1/min spindle taper:40 BBT oder SK spindle drive:14,6 kw positioning accuracy:0,005 mm repeating accuracy:0,003 mm Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2,200 × 2,692 × 2,745 mm weight of the machine ca.:5 t CNC controller:SIEMENS 828D (10.4" LCD+SHOPMILL) oder FANUC automatic tool changer:30 fach coolant system:mit 320l Tank Tool setter:Option inner coolant:20 bar mit Filtersystem chip conveyor - auger:im Maschinenbett Factory-new, immediately available, vertical CNC machining center with CNC control MANUAL GUIDE i FUNCTION + 10.4 "LCD ...

x-travel:760 mm y-travel:820 mm z-travel:560 mm rotary table tiltable:A-Achse +30 ~ -120°, C-Achse: 360°, Min. Index-Inkrement 0.001° table-size:630 mm distance floor area / table surface:900 mm table load:600 kg Workpiece dimensions:max.Ø800x500 mm spindle speeds:20000 1/min. spindle drive:40 kw spindle taper:40 BBT milling feed range:1-10000 mm/min rapid traverse in x-y-z axis:48 m/min rapid traverse speed:Tisch (A-/C-Achse): 83/125 mm/min Tool changer:30 fach max. tool length:125 mm max. tool weight:8 kg max. tool diameter:80 mm Machine size (LxWxH):2200x4000x3415 mm high speed directl spindle motor:20000 1/min CNC controller:Heidenhain iTNC-530 Full 5 axis chip conveyor - auger:im Bett :Marposs mida laser 75P Tool setter:Marposs mida laser 75P Scales:X/Y/Z Achse von Heidenhain Factory new, immediately available CNC 5-axis universal machining center with CNC control HEIDENHAIN TN ...

x-travel:1050 mm y-travel:600 mm z-travel:530 mm table-size:1100x600 mm T-slots:18x5 (Breite x Anz.) mm max. table load:800 kg distance spindle center to table:100-600 mm rapid traverse in x-y-z axis:48/48/48 m milling feed range:1-12.000 mm/min spindle speed:10.000 1/min spindle taper:40 BT (opt. SK) spindle drive:10 (Riemen) kW Tool changer:30 fach max. tool weight:7 kg tool diameter:89 (voll)/125 (leer) mm workpiece length:250 mm dimensions:2780x2500x2810 mm weight of the machine ca.:7,1 t CNC controller:HEIDENHAIN TNC620 (MC1620) automatic tool changer:30 fach Tool setter:Option von BLUM inner coolant:20 bar chip conveyor:Typ Schnecke im Maschinenbett, 2 Stück Factory-new, immediately available, vertical CNC machining center with: 1. CONTROL SYSTEM HEIDENHAIN TNC620 (MC1620) 2. WORKING TABLE SIZE 1100 × 600 MM 3. X/Y/Z AXIS STROKE 1050/600/530 MM 4. X/Y/Z AXIS RAPID TRAVERSE 48/48 ...

turning diameter:360 mm turning length:530 mm control:SIEMENS 828D (10,4"DISPLAY WITH SHOPTURN) swing diameter:690 mm swing diameter over bed slide:360 mm Bar capacity:64 mm spindle speeds:3500 1/min spindle speed:Gegenspindel: 5000 1/min x-travel:230 mm y-travel:±51 mm z-travel:600 mm rapid power traverse in X-and Z direction:30 m/min spindle drive:17 (Hauptspindel) kW spindle drive:5,5/7,5 (Gegenspindel) kW Machine size (LxWxH):3290x2180x2337 mm machine weight:6100 kg c-axis:0.001 ° turret:12-fach, BMT-65 type mit integrierter Y-Achse Y-axis:über Revolver mm hollow chuck:hydr. 250 mm (Hauptspindel)/ hydr. 150 mm (Gegenspindel) :8 bar hydraulic unit:mit Kühlung tailstock:ohne! soft jaw:1 Tool setter:manuell Warranty:12 months on parts Boring bar holder:radial und axial, jeweils 2 Stück brand new CNC turning center with Contains: 1. Control system Fanuc Oi-TD (8,4" LCD monitor)  ...

turning diameter:220 mm turning length:200 mm control:Fanuc 0i TD mit Manual guide, 10,4" LCD spindle speeds:4800 1/min. spindle nose:A2- 6 bar material dia.:44 mm C-axis:0,001 ° x-travel:155 mm z-travel:220 mm rapid power traverse in X-and Z direction:20 m/min spindle drive:11/15 KW ( FANUC ßiL12/10000 ) coolant:8 bar Weight approx.:2,4 t Machine size (LxWxH):1560x1450x1760 mm 3-jaw hydraulic chuck:200 mm turret:12-fach, VDI 40 hydraulic unit:mit Lufkühler soft jaw:1 Satz CNC controller:Fanuc 0i TD mit Manual guide, 10,4" LCD Boring bar holder:2 St. 90°-Halter; 2 Stk. Fräshalter, VDI-40 Tool setter:manuell Automatic Pallet :14 Stk. Paletten mit Sicherheitseinrichtung soft jaw:1 Satz +SPECIAL PRICE+SPECIAL OFFER+ main features: -high speed -high spindle torque -big spindle bore -automatic forced lubrication -hardened and ground guideways -brand-new design eterior -CE certificate of  ...

turning diameter:220 mm turning length:200 mm control:Fanuc 0i-TF Manual Guide bar material dia.:26 mm spindle speeds:6000 1/min. spindle drive:7,5/11 kW rapid speed:20 m/min travel -x axis:155 mm travel - z:200 mm CNC controller:Fanuc 0i-TF Manual Guide (Werkstattprogrammierung) + 10,4" LCD turret:12 (hydr.) fach hydraulic unit:mit Lufkühlung hollow chuck:hydraulisch, 150 mm tool holder:4 Stück Innen (Ø32mm), 6 Stück Außen, 2 Stück Plan bar loader:optional Tool setter:manuel soft jaw:1 Satz BORING SLEEVES :6 Stk. (Durchm. 8, 10, 12, 16, 20, 25 mm) Contains: 1.Control system Fanuc 0i-TD (8.4"COLOR LCD) 2.Spindle motor 7.5/11KW Fanuc â8/8000i 3.Spindle speed 6.000 RPM (Bar capacity: Dia 26mm) 4.X/Z-Axis stroke 155/220 mm 5.X/Z Axis rapid traverse 20/20 m/min 6.Hyd.hollow chuck 6" x 3 jaws 7.Hydraulic turret system 12 stations 8.Hyd. Unit for chuck with air cooler 9.Without tails ...

turning diameter:300 mm turning length:600 mm control:Fanuc 0i TD swing diameter over bed slide:320 mm swing over bed:520 mm bar material dia.:64 mm spindle speeds:4500 1/min. spindle drive:11/15 kW turret:12-fach Tool setter:manuell brand new CNC turning center with Contains: 1 CONTROL SYSTEM FANUC 0i-T (10.4" DISPLAY) 2 X/Z AXIS STROKE 170/600 MM 3 X/Z AXIS RAPID TRAVERSE 30/30 M/MIN 4 SPINDLE MOTOR 11/15 KW 5 SPINDLE SPEED 3,500 RPM (BELT-DRIVEN TYPE) 6 SPINDLE BEARING DIA. F 120 MM 7 BAR CAPACITY DIA. F 64 MM 8 HYD. HOLLOW CHUCK 10" X 3 JAWS 9 HYD. UNIT FOR CHUCK WITH AIR COOLER 10 SERVO-DRIVEN TURRET SYSTEM 12 STATIONS 11 MANUAL TAILSTOCK STROKE 500 MM + QUILL STROKE 100 MM 12 ELECTRICAL CABINET WITH HEAT EXCHANGER 13 STANDARD SPLASH GUARD 14 COOLANT UNIT 15 TRANSFORMER (POWER SOURCE 380V) 16 CHIP CONVEYOR H=1100 MM WITH TROLLEY (CHAIN TYPE) 17 MACHINE COLOR TONGTAI WHITE/DRAK GRE ...

:VL 700A | VL 1100A | VL 1100D x-travel:700|1100|1100 mm y-travel:420|600|600 mm z-travel:500|600|600 mm table-size:800x420|1280x600|1280x600 mm max. table load:500|1000|1000 kg distance spindle center to column:480|630|630 mm distance spindle center to table:100-600|100-700|60-660 mm rapid traverse in x-y-z axis:40/40/32|36/36/30|36/36/30 m milling feed range:1-10.000 mm/min :10.000|10.000|6000 1/min (direkt) spindle drive:11/16,5|11/20,4 kW positioning accuracy:+/- 0,010 mm repeating accuracy:+/- 0,008 mm tool taper:40|40|50 BT/SK max. tool diameter:80/130|80/130|110/220 mm max. tool weight:8|8|20 kg max. tool length:300|300|350 mm dimensions:4215x3230x2700|4200x3510x2850|4200x3510x2850 mm weight of the machine ca.:4,5|7,25|7,5 t CNC controls from:Fanuc tool measuring system:von BLUM workpiece measurement system:von BLUM Brand-new CNC vertical machining center with CNC control Siemens ...

:VL 1400 | VL 1600 x-travel:1.400|1.600 mm y-travel:760 mm z-travel:760 mm table-size:1.600x760|1800x760 mm max. table load:1.200|1.500 kg T-slot (width-distance-quantity):18x125x5 mm distance spindle center to column:780 mm distance spindle center to table:150-910 (opt.100-860) mm rapid traverse in x-y-z axis:20/20/20 m milling feed range:1-10.000 mm/min :10.000 (opt. 6000) 1/min spindle drive:11/20,4 (opt. 15/20,4) kW positioning accuracy:+/- 0,012 mm repeating accuracy:+/- 0,010 mm tool taper:40 (opt. 50) SK/BT max. tool weight:8 (opt. 20) kg tool length:300 (opt. 350) mm Tool diameter:80/150 (opt. 110/200 (angrenzend leer)) mm dimensions:4500x4300x3350 mm weight of the machine ca.:12|13,5 t total power requirement:40 kVA CNC controls from:Siemens/Fanuc/Heidenhain tool measuring system:Blum workpiece measurement system:Blum Brand-new CNC vertical machining center with CNC control Sie ...

x-travel:500 mm y-travel:300 mm z-travel:350 mm weight of the machine ca.:5,7 t dimensions of the machine ca.:286 cm x 276 cm x 290 cm mm x 2600mm (ohne Filteranlage u. Späneförderer) m tool magazin::36 tool taper:SK40 turning speed range:0-9000 U/min main drive motor:18 kW 2 Pallet Changer 500 mm x 300 mm incl. 4. axis , fixed on first pallet incl. filter mist model AFS 600 incl. BLUM tool setter incl. 20 pcs. SK 40 tools ( starter kit ) incl. internal cooling system ( IKZ ) 20 bar and paperfilter incl. chipconveyer incl. Machine documentation: circuit diagrams, electrical plans, operating instructions, etc. Miscellaneous: Machining is possible on the device bridge or the rotary swivel device. Very nice condition , from first hand ( optical industry ) approx 33.500 hours ( spindel ON )

Film Imager / Image Setters Manufacturer: AGFA Model: Avantra 25 OLP year: unknown no RIP Price: on request

Carton setters Carton dimensions (mm) min. / max. Length (L) 220 / 600 Width (B) 100 / 500 Height (H) 100 / 500 Machine overhauled at the factory, with warranty on replaced parts.

Carton setters and floor closures Power: Max. 8 cartons/minute Carton length: Min. 300 mm - max. 620 mm Carton width: Min. 200 mm - max. 400 mm Carton height: Min. 220 mm - max. 450 mm