135,906 used machines on RESALE, but how to find them? Machine Search
Control amplifier, servo motor control, power controller, thyristor power controller, thyristor controller, power regulator -Manufacturer: Shimadian, Thyristor power controllers -Type: PAD36-Series -Number: 2x power controllers available -Price: per piece -Dimensions: 430/260/H255 mm -Weight: 18.4 kg/pc.
With the Xpress you get a reliable and easy-to-use product with the laser software MARKER, which is adapted to your individual requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. Convince yourself of our Xpress: Make an appointment with us and bring samples of your materials to be processed. We would be happy to introduce you to our Xpress. Laser safety goggles are required for this system. We offer these for spectacle wearers and non-spectacle wearers. Laptop/PC customer provision!
Service reset tool, electronic diagnostic and reset device -Manufacturer: Vestatec, Service Reset -Type: VSR-V -Item No.: 600004 -Case dimensions: 320/275/H60 mm -Weight: 0.7 kg
HOLDER C65 SC Municipal equipment carrier with winter maintenance equipment Accessories: 1. KUGELMANN VS150/74 Wedge Vario snow plough blade with a maximum clearing width of 150cm 2. KUGELMANN Duplex Silo Spreader with Control Panel This HOLDER C65 SC implement carrier was first commissioned at the end of 2023, has only 139 operating hours according to the meter and is in very good overall condition with minor signs of use. Customer service freshly carried out. - Net price 71.344,-€ // Gross price 84.900,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!
HOLDER C65 SC Municipal equipment carrier with winter maintenance equipment Accessories: 1. KUGELMANN VS-150/74 Wedge Vario snow plough blade with a maximum clearing width of 150cm 2. KUGELMANN 550l silo spreader with control panel This HOLDER C65SC implement carrier was first commissioned in 2019, has only 348 operating hours according to the meter and is in a well-maintained overall condition with the usual signs of use and wear of this device class. Customer service freshly carried out. - Net price €58,739 // Gross price €69,900 - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!
HAKO Citymaster 1250 Municipal equipment carrier with winter maintenance equipment - KIF Keil Vario snow plough with 145cm clearing width - KIF box spreader - Tipper platform This Hako Citymaster 1250 was first commissioned in 2015, has only about 444 total operating hours according to the meter and is in good general condition with the usual signs of use and wear, fresh from the small customer service, immediately ready for use. The sale is made as a used machine under exclusion of return, guarantee and warranty. - Net price 27.900,-€ // Gross price 33.201,-€ - Inspection / test drive possible - Shipping can be organized nationwide, the costs depend on the distance! - We would be happy to have an attractive leasing / financing offer prepared for you by our leasing partner!
Auction-ID: A1-47449-138
Heating- and service table for gluing units Make: Wehrmann Type: VHT for IMA or Homag gluing units - pre-heating of gluing units for fast change - easy cleaning of the glue roll while rotating - better possibility for adjustments when fixing the gluing unit - only 1 x 400 Volt connection needed - rotating of the gluing roll is controlled by the temperature - option for 2 gluing units working parallel - different feeding systems possible - different plug systems on request possible - safety stable because of heavy construction an adjustable feets - very flexible and easy operation - small space need - safe drive by spur gear - swivel-function 7° for emptying of glueing unit prices for glue pots with bayonet adapter: for one gluing unit: EUR 7,770.00 for two gluing units: EUR Price on request Delivery time: approx. 4 weeks
Perconta Contomat High Performance Self-Service Coin Settlement Terminal Tomatoes are taking over more and more routine tasks from bank employees. The trend that has set standards with automatic cash dispensing and the printing of account statements continues in coin processing with the Contomat. If you are looking for a solution for the customer-oriented deposit of hard change, you are well served with the Contomat self-service terminal. You can find more coin settlement terminals in other sizes - new and used - in our shop! International shipping costs on request!
used
Properties: Volume 60000 L Overall length 6100 mm Cylinder length 4500 mm Total height 4300 mm Diameter width 4200 mm Material V2A (AISI 304) 1.4301 Insulation 150 mm Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Horizontal design Number of feet 4 Description Tank crest: CIP Ball Ventilation nozzle In front: Level indicator with scale Manhole 440 x 340 mm Ladder hooks Residual drain with disc valve Thermometry Subsoil: 4 trumpet feet with domes - height adjustable with bearing cup stiffener Thermometry Behind: Connection Thermometry
Strasbourg Labeling Service SES-120-II Hotmelt labeler for square and round containers, configured for 0.1 ltr, 0.25 ltr, and 0.5 ltr pocket bottles, etc., for square containers with 2 labels or for round containers with one label., Output up to 4,000 units per hour, worked until the end... ran only 10 times a year
For sale a professional spiral dough kneader from the renowned German company Eberhardt Backtechnik – MAXIMAT series. Industrial machine for bakery, confectionery and catering. ✔ very solid German construction ✔ stainless steel bowl ✔ spiral agitator ✔ Electronic control ✔ power supply 400V ✔ heavy duty industrial continuous work machine Visual condition as in the photos. Complete machine. Ideal for: bakery Confectionery dough production pizzas delicacies
5.5m Total. 4m Box Trailer. Spacious Food Area New Catering Trailer / Burger Van 4 metre box stainless Steel cabinets. 5.5m total length with tow hitch. We have for sale a catering trailer, newly manufactured, delivered but never kitted out or put on the road. Everything is brand new. It has a couple of scratches to the body which with a bit of tlc can be covered with stickers or sorted. Some of the finished metal work needs a little tlc, finishing trims etc. In need of a good clean inside and out. Electric box with sockets fitted internally at factory Built in cash draw Stainless steel cupboard doors/ counter tops, chequered plate floor Two hatches. One main serving and side hatch. New tyres
Warehouse Service for Used Machines Our storage service extends greater flexibility for both buyers and sellers seeking to purchase or sell used beverage machines. With access to our dedicated warehouse, sellers can improve their resale value by extending the selling cycles, while buyers can take advantage of temporary storage options to better coordinate their used machinery purchases with their delivery requirements. For Sellers Get your machines out on time and still maximize your resale value: We store your machine as long as it takes to get the best resale value for your asset. Store-And-Sell Option Avoid scrapping Maximize resale values For Buyers Secure your machine and plan your project with no time pressure: We store your machine as long as you need to set-up your project and be ready for assembly. Buy-And-Store Option Secure purchase opportunities Increase logistics ef ...
Multiservice bucket 1260mm KRA-0,30 m³ KL12.5/KL14.5/5035/5040 Auction-ID: A1-50849-221
7277 Hours Orange First registration 01.10.1984 Ident No. GT1 200 D31 8 Accident-free Incl. salt spreader and dozer blade Auction-ID: A7-51138-5
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/uQHEJuVWL08 - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 03/2020 80V 5PzS 775Ah, voltage measured at rest with 84.5 V - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; fork adjuster with side shift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-51195-55
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/jk-VARWfqqk - Former Linde full-service device - Service valid until 07/2027 - UVV valid until 07/2027 - Battery: 49/2015 24V 375Ah, voltage measured at rest with 25.2V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-51195-347
Youtube function and status video: https://youtu.be/ghfkXu-r3yg - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: 16/03/2021, 48V 5PzS 775Ah idle voltage measured at 50.6V - EVO facelift model with colour display and tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster with side shift - Semi-cab with windscreen with windscreen wiper - Side fall-out protection (very easy to dismantle) - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Safety light at the front - Safety light on the side - Comfort seat with lumbar support and seat heating Auction-ID: A1-51195-117
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/S5qh03EDijU - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: 18/2022, 48V 4PzS 500Ah , voltage at rest measured with 49.7V - Triplex mast with full free lift - 3rd valve, sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Comfort seat with lumbar support Auction-ID: A1-51195-76
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/5f49DYz_uCM - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 35/2019 24V 375 Ah, voltage measured at rest with 25.1V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-51195-338
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/EGcwKX9c1gc - Former Linde full-service device - Next service due in 615 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Rear camera - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-51195-58
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/UPvF833LEq4 - Former Linde full-service device - Next service due in 610 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; fork adjuster with side shift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Warning light orange - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-51195-4
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and state video: https://youtu.be/Vanc37cjo2g - Former Hyster full-service unit - UVV valid until 09/2027 - Next service due at 3000 operating hours - Clear-view mast without central hydraulic cylinder - 3rd valve, Stabau S11-ZVI80-360-SO rotary device - 4th valve with fork adjuster - Forks 1800x200x80 mm - Full cabin with air conditioning / heating and windshield wipers - Model with double tyres at the front - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-51195-19
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/mC3Ktrhu2oE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 06/2021, 24V 3PzS 375Ah, voltage measured at rest with 24.9 V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - with charger Auction-ID: A1-51195-364
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/FadLGXxhU80 - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: 24V/3PzS/375Ah, 24.7V, idle voltage measured at 24.75V - Foldable platform - with charger Auction-ID: A1-51195-350
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/uNWpobUg-Ks - Former Linde full-service device - Service valid until 07/2027 - UVV valid until 07/2027 - Battery: 23/06/2023 48V 5PzS 625Ah, voltage measured at rest at 50.9V - Facelift model with tilt angle display (practical for sensitive goods) - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster 35-105cm with side shift - Side fall-out protection (very easy to dismantle) - white non-marking tires - LED front work light - LED work light at the rear - StVZO lighting with turn signals for road approval - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-51195-158
Battery from former Linde Service 830x630x630mm Voltage at rest measured at 51.76 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-51195-1160
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/exv7_6756DM - Former Linde full-service device - Battery: 23/04/2019 24V 500Ah, voltage measured at rest at 25.1V - with charger Auction-ID: A1-51195-384
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/aScmPTKdZ8Y - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Attention: without battery, function unknown Auction-ID: A1-51195-365
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk - Former Jungheinrich full-service machine - Service valid until 07/2027 - UVV valid until 07/2027 - white non-marking tires - StVZO lighting with turn signals for road approval Auction-ID: A1-51195-319
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/MiR9WPcDaLg - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 35/2019 24V 375Ah, voltage measured at rest with 25.0V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale - with charger Auction-ID: A1-51195-386
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/oh4_nS2UCY - Former Linde full-service device - Service valid until 07/2027 - UVV valid until 07/2027 - Battery: 24V 3PzS 375Ah, voltage measured at rest with 25.04V - with charger Auction-ID: A1-51195-437
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/GWnRBvlh1Qs - Former Linde full-service device - Service valid until 06/2027 - UVV valid until 06/2027 - Battery: 35/2019 24V 375Ah, voltage measured at rest with 25.1V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - with charger Auction-ID: A1-51195-314
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/JlGwDugDdtI - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: 10/2013 80 V 775Ah, voltage measured at rest with 82.96V - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Semi-cab with windscreen with windscreen wiper - Roof pane - LED front work light - Comfort seat Auction-ID: A1-51195-70
Youtube function and status video: https://youtu.be/uAg5eAf_ozQ - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: Year of construction 05/05/2014 80 V 775 Ah, voltage measured at rest with 84.95V - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Semi-cab with windscreen with windscreen wiper - LED front work light - Comfort seat Auction-ID: A1-51195-75
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/iLyz-6ZCrYw - Former Toyota full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: Year of construction 2021, 48V 750Ah voltage at rest measured at 49.5V - Triplex mast with full free lift - 3rd valve, sideshift - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-51195-180
\" ESS Vitobloc 200 EM-401/549 Natural-Gas CHP Cogeneration Unit Used natural-gas-fired combined heat and power unit manufactured by ESS Energie Systeme & Service GmbH, part of the Viessmann Group. The unit was manufactured in 2013 and is equipped with a MAN gas engine, generator, heat-recovery system, gas train and electrical control cabinet. Electrical output: 401 kW High-temperature thermal output: 549 kW Low-temperature thermal output: 26 kW Fuel input: 1,053 kW Electrical supply: 400 V / 50 Hz Maximum flow temperature: 85 °C Maximum return temperature: 65 °C Permissible operating pressure: 10 bar high-temperature circuit and 2 bar low-temperature circuit Serial number: 7424399 3 01648 109 Approximate dimensions: 4,000 x 1,600 x 2,400 mm Approximate weight: 5,000 kg The CHP unit is designed for the simultaneous production of electrica ...
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/UGWu_ZLf9Dg - Former Linde full-service device - Next service due in 461 operating hours - UVV valid until 06/2027 - Triplex mast with full free lift - 3rd + 4th valve; fork adjuster 55-194cm with side shift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Comfort seat Auction-ID: A1-51195-173
Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/lt_9jr_Tdqc - Former Linde full-service device - Service valid until 09/2027 - UVV valid until 09/2027 - Year 02/2018 Battery: 80V 6PzS 930 Ah, voltage measured at rest with 83.95V - EVO facelift model with colour display and tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd + 4th valve; fork adjuster with side shift - Full cabin with heater and windshield wipers - Roof pane - white non-marking tires - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-51195-44
Equipment type: Natural Gas Combined Heat and Power (CHP) / Cogeneration Unit Year: 2013 Serial / manufacturing number: 7424399 3 01754 107 Fuel: Natural gas CE marking: CE-0433-13 Quantity: 1 complete CHP installation Industrial packaged natural-gas-fired combined heat and power unit designed for simultaneous production of electricity and useful heat. The installation incorporates a MAN gas engine, generator/alternator, heat-recovery equipment, gas train, exhaust system and ESS/Viessmann control equipment within an acoustic enclosure. Technical specifications: Electrical output: 401 kW High-temperature thermal output: 549 kW Low-temperature thermal output: 26 kW Fuel energy input (Hi): 1,053 kW Electrical interface: 400 V, 50 Hz Maximum current: 800 A Maximum flow temperature: 85°C Maximum return temperature: 65°C HT circuit maximum operating pressure: 10 bar ...
Practical and economical Citroën Berlingo light truck, ideal as a van for self-employed, maintenance company, installer or general business use. The car starts and drives well and is equipped with the reliable 1.6 BlueHDi diesel engine of 55 kW / 75 hp, coupled to a manual 5-speed gearbox. This Berlingo recently underwent a major maintenance, which included replacing the timing belt. In addition, the car is on new tires. Air conditioning is also present and working. At the rear is a spacious, fully separated cargo area with metal partition, sliding door on the side and double rear doors with windows. The car shows normal signs of wear commensurate with age and mileage. The interior and the cargo space have been used, but technically this is an interesting and immediately usable commercial vehicle, thanks in part to recent maintenance and the new tires - Cargo space length: approx. ...
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
Hand spindle press to push pins in printed circuit boards 2 presses on a plate, with a dial indicator.
Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm
maximum number of results exceeded
please refine your search
100 € 
