semi used for sale

Built in 1993 semi-automatic hot stamping press Embossing format max. 125 x 280 mm electr. Drive 1 foil preference 1 heating plate automatic feed Unwinding device for round materials / cans Underframe Delivery date: immediately from stock Price on request. We supply and install worldwide.

Semi-automatic bending, pipe bending machine, mandrel bending machine MOBITEC type BAH 1-2KOTTMANN and BERGER GmbHFabr. No. 056 Year of construction 09/2004- for simultaneous bending of two pipe sections made of steel up to 12 mmBending angle max. 90Pipe diameter max. 12mmMandrel length approx. 65 mmNominal power 3.5 kWDreturn air max. 6 bar / approx. 1 litre per bending cycleMains connection 400 volts, 50 Hz- Pneumatic clamping- Pneumatic mandrel retraction- Control for angle input via STOBER Controlbox Series 4000/5000- Control SIEMENS

Welding dimensions: 1170x900mm, max. product height: 200mm, film: PO, PE and PVC, half-tube film, max. film roll dimensions: 1050x250mm, connected load: 23KW, length: 2640mm, width: 2850mm, height: 1220mm, weight: 600kg. Comes with documentation, shrink tunnel, two conveyor belts and film. The machine has been used very little, only ran for a few hours. An on-site inspection is possible, the machine is immediately available.

Box format: Length: 100 mm - 400 mm Width: 50 mm - 320 mm Equipment: Standard, right-hand delivery, box material: 200-700 g/m², Box types: normal folding boxes, folding bottom boxes, 4-point erecting boxes, 6-point erecting boxes. Machine can be viewed by appointment while running.

Cryovac BL14 Semi Auto bag loader 2020, Stainless, semi automatic bag loader, 1Ph

Manufacturer: Rasco Model: SO1800T Year of Manufacture: 2007 Power Supply: - 400V 3 / N / PE - 208V 3 / PE - 230V 1 / N / PE - 50–60 Hz - 6 kW Air Supply: 6 to 10 bar Exterior Dimensions: - Width: 37.008 in (94.0 cm) - Depth: 43.307 in (110.0 cm) - Height: 88.583 in (225.0 cm) Weight: 871 lb (395 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines

SMIPack BP600 Monoblock semi auto shrink wrapper with sealing bar 2013, Monoblock semi auto shrink wrapper with sealing bar, sealing bar 550mm, max output 10 packs per min, max product height 380mm, 3Ph

Technical data: Cutting range: 90° round: 260 mm 90° flat: 300 x 260 mm 90° square: 260 x 260 mm +45° round: 200 mm +45° flat: 200 x 240 mm +45° square: 200 x 200 mm +60° round: 165 mm +60° flat: 160 x 120 mm +60° square: 150 x 150 mm -45° round: 200 mm -45° flat: 200 x 240 mm -45° square: 200 x 200 mm Shortest offcut length: 35 mm Total connected load: 2.0 kW Saw motor, power frequency controlled: 1.5 kW Cutting speed infinitely variable at frequency controlled: 20 - 110 m/min Saw blade dimensions: 2910 x 27 x 0.9 mm Dimensions and weight: Length, approx.: 1020 mm Width, approx.: 1830 mm Height, upper part lowered, approx.: 1460 mm Height, top in maximum position: 1900 mm Material support height: 950 mm Total weight, approx.: 510 kg Equipment: - Stepless cutting speed - Saw blade guides made of carbide, replaceable - Hydraulic cutting feed -  ...

D 545 AH Horizontal continuous film sealing machine for narrow or flat products., The pre-opened bags are sealed in a lying position, which is ideal for thin and flat products that cannot stand upright and would fall over when sealed. The integrated, height-adjustable conveyor belt can be pulled out up to 70 cm to seal larger products, as shown in the photos. Thanks to this particularly practical conveyor belt, you can seal packages of various sizes., This allows you to effortlessly provide almost all modern film types, including composite materials, with reliable, high-quality, 10 mm wide weld seams., More here:, .audion/de/webshop/verfugbare-produkte-im-webshop/d-545/d-545-ah-2/

Variovac Rotarius semi-automatic tray sealer with a dual-tool system owes its name to its practical rotary table: while the machine vacuum seals and gas flushes trays in one station, the operator can simultaneously remove finished trays and load new ones at the front. This prevents downtime and increases output when packaging a wide range of products from both the food and non-food sectors. Film roll diameter: up to 300 mm. Tray depth: up to 100 mm. Tray depth for skin: up to 40 mm. Product protrusion: up to 25 mm. Packaging output: 4 to 8 cycles/min. Packaging types: MAP, Skin, Sealing. Compressed air: min. 6 bar. Electrical voltage: 7 kW - 230/400 V - 13 A - 50 Hz - 3 Ph. Busch RA 0063F vacuum pump. Control panel with Siemens S7-300 PLC and Variovac Touch screen operation panel. Pallet with foil available., Type of Machine: Tray sealer, Capacity: 4 to 8 cycles/min, Motor: 7 kW - 230/40 ...

Semi- automatic labelling machine model S1/M – CONSOLE 230V, 50 Hz, Single phase Max approx 700 bph Console for labelling adjustment Paper web passage height H=150mm

amount of capping heads: 1 capacity / hour ca.: 450 working direction: semi automatic bottle height min. [mm]: 350 cap sorting system: Vibrating container Strom / Volt: 220 weight [kg.]: 90

Die halbautomatische Verschlussmaschine RLC1 ist für die Verpackung von Glasflaschen mit 26 oder 29mm Kronkorken geeignet. Die Schließeinheit kann auf Kronkorken von 26 oder 29mm Durchmesser verwendet werden. Wenn man beide Durchmesser braucht, wird eine zusätzliche Schließeinheit geliefert. Der Schließkopf der Kronkorken ist aus gehärtetem Stahl, und auch im Laufe der Zeit ist er verschleißfest. Die Schiene führt die Kronkorken in der richtign Position. Die spezifische Form der Schiene wird spezifisch für die Kronkorken aus Edelstahl 304 gebaut. Diese enthält eine kleine Menge Kronkorken, die manuell eingegeben werden können. Die Schließeinheit zieht die Kronkorken aus der Schiene heraus und steckt sie in den Schließkegel. Auf Anfrage kann man einen Trichter einbauen, um eine größere Menge Kronkorken einzugeben. Den EG-Normen entsprechend startet der Verschlussprozess mit ...

motor defect. 5000 EUR afte repair

1 semi-hard cheese dairy plant for non-pressed semi-hard cheese such as Tilsiter cheese Moulds and drain tables for approx. 55,000 l of cheese dairy milk per shift are available with 1 cheese curd - whey rotary drum de-whey with 10 curd melting vats, space for a total of 10 cheese curds. 1,150 Performa cheese bread molds

Format range: Boxes, folded flat: max. 400 mm, min. 50 mm Length of the boxes: max. 500 mm, min. 100 mm Equipment: Standard, left-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, carton types: Ordinary folding boxes 4+6 dot boxes, with or without lids. Overhaul 2026: cleaned, checked, painted, new belts and belts. Machine can be viewed by appointment while running.

Width 50 cm Year of construction 2023 Exhibition machine - as good as new condition Semi-Automatic Adhesive Tape Dispensing Machine Computer control with touch screen Manual installation 1 applicator RAP 25 (9 - 25 mm belt width) Box delivery Delivery date: immediately

Semi-Automatic or Automatic Shrink Wrapper with welding bar – New The automatic machine, is very fast format changes, 90° product feeding belt, possibility of introducing product up to three rows with eccentric system, the pusher works without air and has a motor controlled by inverter and encoder, perfect to be inserted in automatic lines. Production can vary according to the number of rows required. Suitable for packaging individual or groups products in multiple lines in the desired format, such as boxes, packets of coffee, trays etc. Automatic and semiautomatic machines with welding bar, with product feed conveyer in line, set up for manual loading of the product on the belt or inserted in completely automatic lines . Represent maximum simplification in bundling machine. Created with a single supporting structure. Suitable for packaging individual or already assembled products suc ...

Semi-Automatic or Automatic Shrink Wrapper with welding bar to 22 P/M – New Automatic shrink wrapper with product feed conveyor in line set up for manual loading of the product on the belt or inserted in completely automatic lines. Suitable for packaging individual or already packaged products such as boxes, trays, hanks of cable, parquettes, or light to very light products with a minimum height of 3 mm such as boxes, linen, reams of paper, magazines, leaflets. Possibility of total closing of the bundles by means of superimposition and lateral auto-gluing. The single-block systems with welding unit and tunnel in a single robust structure were designed to have reduced external dimensions making them compact and reliable, suitable for packaging products with heat shrinkable flat leaf” polythene film, individual or grouped products with just film, or film plus cardboard divider or tray. ...

Semi-automatic lathe SPT 32NC/1500

Used Edwards IXH3045H Semiconductor Vacuum Pump Model: IXH3045H / NRE418 Voltage: 380-460V (50-60Hz) 32A Side hoods are missing Auction-ID: A1-48529-1

Technical data: Dimensions and weight Width of the machine: 2230 mm Length of the machine: 2400 mm Weight of the machine: 1550 kg approx. Performance 0 – approx. 55 m / min, endurance run. Cycle operation power / hour depending on the operator. Up to 2,000 pcs/hour depending on packaging Drive Belt press belt 1 x 0.75 kW Noise 70 dB (or less) Connection 3 x 400 V, 25A, 50 Hz, powered by the LUNEX basic machine. Compressed air None Formats Min. width approx. 60 mm depending on the packaging Min. length approx. 150 mm depending on the packaging Max. width 1600 mm (= passage width) Max. length in principle not limited Material All formats depend on the nature of the packaging. Dimensions are valid for folded blanks. Motor Glulam Bridge Lenze Type: MDXMA2M080-32 (IP 55) 50/60 Hz 0.75/0.92 kW 400/230 V 1.90/3.30 Amp.

MEP Shark 282 CCS Doppelgehrungs Metallbandsäge ? Leistungsstarke Metallbandsäge für Schnitte von 45° rechts bis 60° links ? CCS (CutControlSystem) für automatischen Schnitt. (Stufenlose Regulierung des Vorschub und Abschaltung bei Schnittende) Schnittbereich RUND 0°: 250 mm Schnittbereich RUND 45° li.: 230 mm Schnittbereich RUND 60° li.: 120 mm Schnittbereich RUND 45° re.: 200 mm Schnittbereich VIERKANT 0°: 220 mm Schnittbereich VIERKANT 45° li.: 200 mm Schnittbereich VIERKANT 60° li.: 80 mm Schnittbereich VIERKANT 45° re.: 170 mm Schnittbereich FLACH 0°: 280 x 220 mm Schnittbereich FLACH 45° li.: 220 x 200 mm Schnittbereich FLACH 60° li.: 140 x 80 mm Schnittbereich FLACH 45° re.: 200 x 140 mm Geschwindigkeit: 36 / 72 m/min. Motor: 1,5 / 1,8 kW Sägeband: 2950 x 27 x 0,9 mm Gewicht: 440 kg 3x neue Sägebänder

Horizontal band saw, semi-automatic Cutting diameter 260 mm Cutting range at 90 degrees: around 260 mm Cutting area at 90 degrees: square 250 x 400 mm Cutting speed 20 - 80 m/min Conventional control Total power requirement 2.0 kW Machine weight approx. kg Dimensions LxWxH 2.0 x 1.4 x 1.2 m Auction-ID: A7-49782-431

Used Edwards IXH3045H Semiconductor Vacuum Pumps Model: IXH3045H / NRE418 Voltage: 380-460V (50-60Hz) 32A Side hoods are missing Auction-ID: A1-48529-2

Lot 528: MEP Semi-Automatic Horizontal Band Saw Technical Details ‍ 1. Machine identification data Name: Semi-Automatic Horizontal Bandsaw Manufacturer: MEP Model: Shark 260 Year of manufacture: 2001 Machine number: 29747 37.R 2. Operational parameters Saw blade size: 2750 x 27 x 0.9 mm Cutting speeds: 2 speeds (36 & 72 RPM) Motor power (P max): 1.9 kW Operation mode: Semi-automatic with CCS (Cut Control System) Clamping: Pneumatic quick clamping Mitering capability: Yes Features: Assistant saw lowering, adjustable lowering feed rate, coolant pump in machine base Electrical connection: 400 V (3 Phase) / 50 Hz (optional 230 V) Air requirement: 6 bar 3. Weights Machine weight: 370 kg 4. Dimensions Overall machine size (Width x Length x Height): 80 x 158 x 190 cm ‍ ‍ Disclaimer: The technical specifications provided ar ...

Equipped with roller bench 230x38cm Auction-ID: A1-47361-100

Consisting of: 5x bumper, total width approximately: 2350 mm, chassis width approximately: 765 mm. Auction-ID: A1-47415-74

Consisting of: 4x various brands, models and dimensions, total width approximately: 2300 mm, 2350 mm and 2440 mm, chassis width approximately: 790 mm, 855 mm, 715 mm and 810 mm. Auction-ID: A1-47415-72

Cutting range 300x250 mm; variable speed control; infeed roller conveyor 530x1900 mm; discharge roller conveyor 530x2000 Auction-ID: A1-49659-23

Consisting of: 7x bumper, various brands, models and widths, mainly approximately: 1950 mm and 220 mm. Auction-ID: A1-47415-69

Extendable Chassis: TXC343 chassis are \"extendable\" to facilitate different container lengths (e.g., 20′, 30′, 40′, 45′) Auction-ID: A1-47415-57

Consisting of: 3x bumper, total width approximately: 2350 mm, chassis width approximately: 830 mm. Auction-ID: A1-47415-76

Consisting of: 4x bumper, total width approximately: 1x 2350 mm and 3x 2200 mm, chassis width approximately: 730 mm. Auction-ID: A1-47415-75

Technical max. Vehicle mass 41000 kg rear axle is steered front axle is lifting power tail lift 2500 kilos equipped with LED lighting inside equipped with axle load monitoring own battery for tail lift cooling engine needs to be filled with gas and therefore malfunctions equipped with. Rear camera Auction-ID: A1-47415-60

STAS S234CX 2-axle aluminium tipper trailer – 27.990 kg payload – grain scrapers – 2009 Specifications: Brand: STAS Type: S234CX Version: C1B / A12 Chassis number: YE6S234CX8A120463 First registration: 15-12-2009 Construction Date: 2009 Body: aluminium tipper Tipping Direction: Backward Number of axles: 2 Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre profile: approx. 30% all around Axle distance: approx. 1.30 m Technical axle load: approx. 10,300 kg per axle Tare weight: approx. 5.010 kg Payload: approx. 27,990 kg Maximum permissible total weight: 33,000 kg Overall dimensions: approx. 800 x 260 x 270 cm (L x W x H) Cargo box colour: green Features: Lightweight aluminum body Hydraulic reverse tipping function Hydraulic telescopic tipping cylinder at the front Double rear doors 2 manually operated grain chutes/d ...

GS Meppel OTILB-120-2700 3-axle semi low-loader – 2 axles forced steered – 30.100 kg payload – 2004 Specifications: Brand: GS Meppel Type: OTILB-120-2700 Version: semi low-loader Date of first admission: 07-10-2004 Number of axles: 3 Axle brand: ROR Steering: last 2 axles forced steered Suspension: air suspension Braking system: drum brakes Brake Devices: ABS / EBS Tyres: twin wheels, 235/75 R17.5, approx. 60% tread pattern Tare weight: 8.900 kg Maximum total weight: 39,000 kg Payload: 30,100 kg Maximum axle load: 9,000 kg per axle Maximum torque pressure: 12,000 kg Dimensions LxW: approx. 13.60 x 2.54 m Neck LxH: approx. 4.25 x 1.40 m Subfloor LxH: approx. 9.40 x 0.92 m Bevelled back: approx. 1.35 m long, height approx. 0.65 m Features: Drive-on ramps Beveled back Air suspension ABS / EBS Stanchion holes Heavy lashing/lashing eyes Aluminium sid ...

7 meter system, central lubrication, lift axle, good working. Auction-ID: A1-47415-58

Consisting of: 4x DAF bumper, total width approximately: 2300 mm, chassis width approximately: 790 mm. Auction-ID: A1-47415-71

Consisting of: 5x various bumper, total width approximately: 2150 mm and 2350 mm, chassis width approximately: 770 mm, 860 mm, 850 mm and 865 mm. Auction-ID: A1-47415-77

Galvanized trailer; air-braked; air suspension; Interior dimensions: ... Auction-ID: A1-47415-62

Consisting of: 2x bumper, total width approximately: 2300 mm, chassis width approximately: 800 mm. Equipped with tow bar. Unused. Auction-ID: A1-47415-70

Pneumatic drive, Equipped with 2x pneumatic screwdriver Auction-ID: A1-49777-12

Equipped with air brakes; air suspension; rear axle lift axle; 58 m3 volume; Auction-ID: A1-47415-51

Consisting of: 4x bumper, various brands, models and dimensions, total width approximately: 2350 mm and 2150 mm, chassis width approximately: 770 mm and 850 mm. Auction-ID: A1-47415-78

Semi-automatic strapping machine, model EXS-206. Machine for strapping parcels and pallets using strapping. Equipped with an integrated strip reel and mounted on wheels for easy movement. Power supply: 220 V / 50 Hz Condition visible in the photos. Auction-ID: A1-49938-28

New and unused Huayee mini excavator from 2026 in the compact 1-ton class. This fully equipped mini excavator combines compact dimensions with a KOOP diesel engine, hydraulic control, swivel boom/folding arm, semi-automatic quick coupler and two included buckets. The machine has a dead weight of approximately 1,000 kg and, with a width of only approximately 93 cm, is particularly suitable for work in places where larger excavators are difficult or impossible to reach - Equipped with a KOOP diesel engine of 7.6 kW (approx. 10.3 hp) and hydraulic control. The rubber tracks ensure good mobility and make the machine suitable for use on a wide range of surfaces - An important advantage of this version is the folding arm/swing boom, which allows the boom to be positioned sideways. This also allows digging next to the center line of the machine, which is particularly practical for work along wa ...

7 Steelcase node Seminar Chair with Table in Green Auction-ID: A1-49989-65

2 different green chairs with moulded plastic seat shell and metal frame. The chairs are suitable as seminar chairs, school chairs, visitor chairs or for office, training and recreation rooms. Auction-ID: A1-49989-88

New and unused Huayee mini excavator from 2026 in the compact 1-ton class. This fully equipped mini excavator combines compact dimensions with a KOOP diesel engine, hydraulic control, swivel boom/folding arm, semi-automatic quick coupler and two included buckets. The machine has a dead weight of approximately 1,000 kg and, with a width of only approximately 93 cm, is particularly suitable for work in places where larger excavators are difficult or impossible to reach - Equipped with a KOOP diesel engine of 7.6 kW (approx. 10.3 hp) and hydraulic control. The rubber tracks ensure good mobility and make the machine suitable for use on a wide range of surfaces - An important advantage of this version is the folding arm/swing boom, which allows the boom to be positioned sideways. This also allows digging next to the center line of the machine, which is particularly practical for work along wa ...