We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,440 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Semiautomatic welding machine for pipes TiG OERLIKON in a complete set with: - OERLIKON CITOTIG DTW 255 welding machine -electrical cabinet -console -swivel - the maximum working area is 2m The semi-automatic machine is used for welding pipes with the TiG method. Technical condition - good
used
Band saw length range of semi-finished products: 100 – 18,000 mm max. workpiece height: 830 mm cutting range: circle Ø 30 – 800 mm pl. mat. 20 x 20 mm square 1300 x 750 mm cutting at an angle of +60˚ to -45˚ min. cut: 35 mm cutting width: 3 mm max. workpiece weight: 12,000 kg
used
Used Bitzer 4HTC-15K-40P (x2) semi-hermetic reciprocating compressor rack on CO2 (R744). Complete with an OCS COLD RLV 110L 0DS28 liquid receiver with a volume of 110 liter, oil separator, oil reservoir, Danfoss FC-103P15KT4P55 frequency converter, pressure and safety switches/gauges, liquid line filter drier and a control cabinet. The compressors have a total displacement of 24 m³/h at 50 Hz and 29 m³/h at 60 Hz. Specifications: Brand: Bitzer Type: 4HTC-15K-40P (x2) Refrigerant: CO2 Refrigerant type: R744 kW at 0ºC/+40ºC: 59,2 kW at -5ºC/+40ºC: 49,2 kW at -10ºC/+40ºC: 40,3 m3 / h: 50 Hz - 24 m³/h / 60 Hz - 29 m³/h Remarks: Y.o.b. 2017 Sizes: 2160x1000x2100 mm (LxWxH)
used
Used York YLCS1110HA 50Y A water cooled chiller on R134A. Complete with 2 York N-A-J semi-hermetic screw compressors, York shell and tube condenser, York shell and tube as evaporator, 2 SWEP V80Hx56/1P-SC-S braced heat exchangers, liquid line filters, pressure gauges, control cabinet with a York display. Specifications Brand: York Type: YLCS1110HA 50Y A Product type: Water Cooled Chiller Capacity kW: 897,0 Capacity Tons: 255,1 Refrigerant: Freon Refrigerant Type: R134A Weight in kg: Operating weight: 6610 kg / Shipping weight: 6000 kg Sizes: 4100x1600x2200 mm (LxwxH) Compressor(s) type & model: 2 York N-A-J Display: York chiller display Number of fans 0 Remarks |: Y.o.b. 2005 Remarks ||: Capacity based on a evaporating temperature of 6/12°C and a condensing temperature of 40/45°C.
used
Trane RTUD110 chiller water chiller with a cooling capacity of approx. 400 kW | ChillerTech - Used chillers Basic information: -Manufacturer: Trane -Model: RTUD 110 -Cooling capacity: 419 kW at 12/7 oC at outside temperature 35 oC -The refrigerant used, as well as its quantity: R134A / circuit A – --- kg / circuit B – --- kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: 2011 -Connection pipes: 5" flange connection – DN125 -Operating range: -15 oC to 45 oC -Number and type of compressors: 2 pcs. semi-hermetic screw compressor -Additional information: low noise version -Dimensions: width – 3230 mm; length – 1070 mm; height – 1960 mm -Weight: 2600 kg The device is available immediately! Check out our other devices...
used
Water chiller CIAT LXH 1850Z chiller with cooling capacity 365 kW with hydraulic module | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: CIAT -Model: LXH 1850Z -Cooling capacity: 362 kW at 12/7 oC at 35 oC outside -The refrigerant used, as well as its quantity: R407C / circuit A – 55.0 kg / circuit B – 25.0 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of manufacture: - -Connection stubs: 5" flange connection -Number and also type of compressors: 2 pcs. Bitzer semi-hermetic screw compressor -Additional information: hydraulic module (buffer tank and Salmson double constant flow water pump) -Quantity: 1 piece Device available immediately Check out our other cooling/heating equipment...
used
Water chiller CIAT LXH 1850Z chiller with cooling capacity 365 kW with hydraulic module | ChillerTech - Sale and rental of water chillers Basic information: -Manufacturer: CIAT -Model: LXH 1850Z R407C -Cooling capacity: 365 kW at 12/7 oC at 35 oC outside -The refrigerant used, as well as its quantity: R407C / circuit A – 55.00 kg / circuit B – 25.0 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: NO INFORMATION -Connection pipes: 5" flange connection – DN125 -Number and type of compressors: 2 pcs. Bitzer semi-hermetic screw compressor -Additional information: hydraulic module (buffer tank and 2x constant flow circulation pump) -Dimensions: width – 2200 mm ; length – 5289 mm ; height – 2200 mm -Weight: approx. 5806 kg Device available immediately Check out our other cooling/heating equipment...
used
Full Automatic Depalletizer for Glass Bottles or Cans Capacity: 15.000 - 45.000 bph/cph for 330-500 ml User friendly and customizable software for each requested product and need. Minimal downtime: our depalletizer can quickly be adjusted to work with new products, change of size or product type. Semi-Automatic push” depalletizer for pallets with layers of glass bottles, cans or other types of containers with a two-column portal structure, mobile centering device, intermediate table and transfer trolley. If requested our machine can work completely automatically resulting in a high production rate. The machine includes; Layer movement unit Pallet roller conveyors (Motorised) Electrical cabinet HMI – keypad and display with auto-programming functions Pneumatic system Safety guarding (Metal netting) Safety devices Machine operation status Technical documentation And meets ...
new
cutting diameter: 240 mm saw band length: 2730 mm cutting width: 270 mm cutting speed: 37 + 74 m/min dimensions of saw-band: 2730 x 27 x 0,90 mm : 240 mm : 230 mm : 270 x 230 mm : 210 mm : 200 mm : 200 x 210 mm : 130 mm : 130 mm : 130 x 160 mm total power requirement: 1,2 kW weight of the machine ca.: 0,3 t dimensions of the machine ca.: 1,6 x 1 x 1,7 m Miter left 60 ° Quick-release vice can be moved in the X-Y axis Quick release lever for easy handling Machine base with automatic cooling Electrical monitoring of band tension + band breakage, saw band cover. The saw only runs when it is OK. AutoCut additionally: Economical, semi-automatic operation through automatic saw frame lowering - continuously adjustable Hydraulic brake cylinder for stepless feed via limit switch Rapid traverse (rapid approach to the workpiece) Manual operation possible The data for this ad was created with Modu ...
new
cutting diameter: 250 mm saw band length: 2950 mm cutting width: 280 mm turning speed range:: 36 / 72 m/min dimensions of saw-band: 2950 x 27 x 0,9 mm capacity 90 degrees: round: 250 mm capacity 90 degrees: square: 220 mm capacity 90 degrees: flat: 280 x 220 mm capacity 45 degrees: round: 230 mm capacity 45 degrees: square: 200 mm capacity 45 degrees: flat: 220 x 200 mm capacity 60 degrees: round: 120 mm capacity 60 degrees: square: 80 mm capacity 60 degrees: flat: 140 x 80 mm work height max.: 870 mm total power requirement: 2 kW weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,8 x 0,9 x 1,8 m Powerful miter band saw for cuts from 45 ° right to 60 ° Left Electro-hydraulic semi-automatic machine with microprocessor control and 4 Modes of operation Description: - Indexing at 0 ° / 45 ° / 60 ° and internal table clamp for Intermediate angle - Control panel on vertical ...
used
Kaltenbach circular saw KKS 450 with length measuring system L-40NC Specifications Type: Kaltenbach Length measuring system: L-40NC Year of construction: 2005 Type circular saw: KKS 450 H Year of construction: 1998 Saw blade: Ø 450mm / holder Ø50mm Working range max (90°) 150mm Working range square (90°) 140x140mm Working range flat steel (90°) 330x40mm Working range U-steel standing (90°) 120x55mm Working range round (90°) Ø 150mm Miter range 0° - 90° 0° Dimensions: LxWxH 1110x1020x2000mm Weight: approx. 950kg Description: Used, hydraulic universal saw machine in semi-automatic design with rotary table for miter cuts: - Clamping, sawing, returning, opening – simply at the push of a button - Adjustment of the cutting height via push buttons - User-friendly electronic control directly on the machine - Good accessibility for saw blade changes and ...
used
Heidelberg Printing Press Speedmaster - 74 - 2P - H Year of manufacture - 1996 converted to 1998 machine Number of prints: 161 million prints Format: 510 mm x 740 mm EQUIPMENT: - CP-Tronic machine control - CPC 1-04 color remote control - Semi-automatic turning - 15000 sheets/hour - Substrate: 0.03 – 0.6mm - Double-sheet control - Alcolor film dampeners with circulation and cooling Baldwin - Autoplate - Plate clamping system - Automatic - Automatic blanket washing device, - GTW and other components have been kpl. - Modified to the 1998 version - Automatic counter-pressure washing device - Automatic roller washer - Powder: Grafix - Alphatronic 200 - High pile delivery - Standard accessories - Machine was completely repaired before dismantling. printed. - Machine is disassembled and ready for shipment. - Location of the machine: Switzerland Machine is techni ...
used
5-Decker Sieve Drive via 2 x 4.6 kW motors semi-mobile steel construction
used
Used chiller Daikin EWAD-170 a cooling capacity of 170 kW | ChillerTech - Used chillers available immediately! Basic information: -Manufacturer: Daikin -Model: EWAD170MBYNNHXU -Cooling capacity: 170 kW in the parameter 12/7 oC at an outside temperature of 35 oC -The refrigerant used as well as quantity: R134A / circuit A – 42,0 kg -How many cooling circuits: 1 circuit - Year of production: 2009 -Operating range: from 5 oC to 20 oC -Number and type of compressors: 1 pc. semi-hermetic screw compressor Daikin ZHC3LTGUYE -Additional information: low noise -Dimensions: width – 1109 mm; long – 3973 mm; high – 2221 mm -Weight: approx. 1800 kg The device is available immediately Check? other Our cooling/heating devices...
used
Type: SF 1600x5,2 2D Screen area: 1,600 x 5,200 mm with plastic sieves Electric drive 22 kW semi-mobile steel construction with platform, outlet chutes and outlet tray optional: with feed and pull-off conveyor belt
used
The PARAMIX – unit for carbonated drinks. The included process steps are; deaeration of water, dosing and mixing of water and syrup, carbonating of water-syrup blend. Retrofit 2009 by FAMIX: - Carbonating device - CO2 Pressure-Temperature regulator Typ BMS7, Additional title: mixing unit 1983 - 2010, Capacity approx.: 150 hl/h Mixing and carbonating, Variety / Product: carbonated drinks, Operation / Control: mixing unit semi automatic, carbonating unit automatic Siemens S7, Material: Stainless steel, Position: Frame mounted, Features: 2 pressure vessels (Product und Vacum), each 8,3 hl/ 8 bar, CO2-Pressure-Temperature regulator (FAMIX BMS7), Carbonising unit (FAMIX) Capacity 13000 l/h, PT 100, Pressure sensor, Pressure relief valve, CIP connection, control cabinet, HMI (Siemens), 2 mixing vessels with flap and agitator (Ahlborn, approx. 15 hl per vessel), Code: 5243
used
Used chiller Blue Box KAPPA/LN 1502 a cooling capacity of 350 kW | ChillerTech - Used chillers available immediately! Basic information: -Manufacturer: BlueBox -Model: KAPPA/LN 1502 -Cooling capacity: 350 kW in the parameter 5/0 oC at an outside temperature of 40 oC -The refrigerant used as well as quantity: R407C / circuit A – 36,0 kg / circuit B - 36,0 kg -How many cooling circuits: 2 circuits - Year of production: 2000 -Operating range: from -8 oC to 24 oC -Number and type of compressors: 1 pc. semi-hermetic piston compressor RefComp SRC-L-180 L1 -Additional information: NONE -Dimensions: width – --- mm; long – --- mm; high – --- mm -Weight: approx. 3000 kg The device is available immediately Check other Our cooling/heating devices...
used
Semi-automatic cross-cut saw Saw blade diameter 400mm Motor 3kW Sawing capacity 50 x 300mm, 100 x 190mm
new
Semi-automatic undercounter circular sawing machine for cutting aluminum, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 3 kW Saw blade path upwards for sawing - downwards for empty stroke Mitre adjustment range infinitely variable from 10° to 170° - with grid dots at + 45° and – 45° Pneumatic saw table clamping Digital display for mitre angle Sawing range 90° - approx. 400 x H 135mm or 460 x H 100 mm Sawing range 45° - approx. 190 x H 60 mm or 120 x H 150 mm Saw blade feed speed infinitely variable by means of a handwheel. Adjustment range material stop forward and backward approx. 180 mm Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.1 m x 1.2 m x H 1.65 m Weight approx. 310 kg
new
Semi-automatic circular sawing machine with radial cut for cutting aluminium, non-ferrous metals, wood and various plastics Clean, burr-free cut edges as if polished. Saw blade diameter Ø 600 mm Saw blade drive power 4 kW Saw blade travel forward for sawing - backward for empty stroke Mitre adjustment range infinitely variable from 20° to 125° Digital display for mitre angle Sawing range 90° - approx. 230 x H 180mm or 300 x H 120 mm Sawing range 45° - approx. 160 x H 180 mm or 210 x H 120 mm Saw blade feed speed infinitely variable by means of a handwheel. Automatic spray mist lubrication Compressed air requirement 6 to 8 bar Dimensions approx. 1.55 m x 0.96 m x H 1.65 m Weight approx. 670 kg
used
Semi-automatic undercounter cross-cut saw OMGA, model T421ST Saw blade diameter 400mm Cutting capacity: 20x270mm, 50x250mm, 100x190mm, 115x152,5mm Stroke saw blade pneumatic Support table inlet and outlet side Adjustable speed Two-hand operation (CE) 10 degree inclination, workpiece lies at the machine stop Motor 2,7kW
used
This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric version from 2012. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 27,110 net. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6 months warranty on all electri ...
used
– Italian production – year of manufacture 2009 – full optimization –DTR –CE TECHNICAL PARAMETERS: cutting width max. 260 mm cutting height max. 120 mm engine power 7,5 kW material length max. 4000 mm receiving table 3000 mm disc diameter 500 mm feed speed 60 m/min possibility to program 100 dimensions of cuts programming of 5 classes of wood automatic and semi-automatic operating mode total dimension (L/W/H) 930 / 150 / 170 cm
used
Passage width 2500 mm Stroke 900 mm Total power requirement 62 kW Machine weight ca. 27,5 t Dimensions L x W x H approx. 3950 x 2200 x 4850 mm Retraction force 40 t Master cylinder 2 pieces Column diameter 220 mm Installation height 1300 mm Table size 2500 x 1600 mm Ram size 3100 x 16000 mm Table height above floor approx. 900 mm Flow speed 200 mm/sec Return speed 200 mm/sec Working speed 5 - 15 mm/sec Oil tank 1500 l Oil quantity 1200 l Pressure control adjustable from up to 50 - 400 t Thermoforming cushion 1400 x 800 mm Deep-drawing unit capacity 30 - 60 t Deep-drawing cushion stroke 250 mm Deep-drawing cushion speed 5 - 80 mm/sec robust machine body with solid welded construction low-maintenance and reliable Piston rod with induction hardening and chrome cladding T-slots according to customer requirements, if not specified 22mm according to DIN CE Certific ...
used
Ochsner Edge Gilding Machine, For Semi-Automatic Edge Gilding of a Veriety of Books, Hand Feeding Area for End Boards and Book Blocks, 4 Sanding Stations, 1st Cross Sanding Station with 100 Grade Sanding Belt, 2nd Linear Sanding Station with 180 Grade Sanding Belt, 3rd Linear Sanding Station with 240 Grade Sanding Belt, 4th Linear Sanding Station with 320 Grade Sanding Belt, Brushing Station, Dust Bag Extraction Unit, Pre-Heating of Book Blocks, Gild Foil Application with 2 Rollers, Electrical and Mechanical Guarding, Main Control Panel with Timer For Pre-Heating, Foil Cutter, Return Conveyor, Format: Book Size: Max. Any Standard Book Sizee Plus Larger Formats, Min. 68x102mm, Production: at Block Thickness of 75mm ca. 50 Blocks/Hour, Pocket Diary Size: 25 Blocks/Hour Desk Diary Size
Can filling line capacity: approx. 24,000 cph Filling Product: Soft drinks Can size: 330 ml and 500 ml standard cans Can Type: 211/202 consisting of: 1. Can depalletizer King with automatic can infeed system with Siemens S7 PLC including can table, pallet magazine, sheet removal system the depalletizer is fixed for the following pallet dimensions: 1.180 x 1.250 mm 2. Can rinser Transtech Hysek to rins new cans with filtered water infeed height: approx. 2,500 mm Outfeed Height: approx. 1,200 mm 3. Can filler and seamer KHS / Ferrum - Filler Innofill EMD 76 with 76 filling valves blocked with - Can seamer Ferrum type: F708G with 8 seaming stations the filler and seamer will be complete reconditioned in our workshop including new electric control panel with PLC Siemens S7 including Danfoss frequency inverter including beer pressure regulating valve including CIP ...
used
tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Man Roland 705 3B, Year 2004, ONLY 64 mio Impressions, Straight Machine, Max. paper size: 740x1040 mm, Min. paper size: 340x480 mm, Image area: 715x1020 mm, Plate size: 790x1030 mm, Speed: 16.000 s/h, RCI 2 Ink Control Remote Job Card, CCI colour regulation, Semi Automatic Plate Change, Roland Dampening System, Extra and NEW Accessories Included:, Densitometer Techkon, Techkon Presslink with Closed-Loop and Dynamic Presetting Ink, DPM (Display Press Monitoring Software), Automatic washing devices (rollers, blanket, cylinders), Powder Spray Grafix Cantronic 3000, Electronic double sheet control, Electronic side lay control, TECHNOTRANS refrigeration and recirculation, Ink temperature control, Insonorgraf (soundproof cabin), Machine Visible in Production, Machine Avaiable on 08/2023
used
MAN TGX 26.480 6x2 Mileage: 712545km Engine/Assistance Systems -D2676LF45 - 480 hp / 353 KW EURO6 SCR-2300Nm(2500 with TopTorque) C-R New -Electronic speed limiter 89 km/h + 1km/h Cruise Control Tolerance -Low noise certificate for Austria and L- sign • COP document • Exhaust gas confirmation Euronorm • CEMT certificate • National approval documentation Germany noise measure 80 dB (92/97EEC) -Fuel filter -Start-up aid -HA Air -HA differential lock -Fuel tank aluminium 800l right and 60l AdBlue • Fuel tank attachment • Lockable tank cap • 1 pc. ventilated for Simultaneous locking - AdBlue tank cap lockable 1 piece -MAN BrakeMatic (electronic braking system) -Emergency Brake Assist 2 (EBA2) -Anti-lock braking system (ABS) -Traction Control (ASR) -Electronic Stability Program (ESP) -Gearshift MAN ComfortShift -Transmission ZF 16 S 23 ...
used
Heidelberg Printing Press Speedmaster - 74 - 2P - H Year of construction:1999 Number of prints: 110 million prints Format: 510 mm x 740 mm EQUIPMENT: - CP-Tronic machine control - without - CPC 1-04 colour remote control - Semi-automatic turning - 15000 sheets/hour - Substrate: 0.03 – 0.6mm - Double-sheet control - Alcolor film dampeners with circulation and cooling Baldwin - Autoplate - Plate clamping system - Automatic - Automatic blanket washing device, - Automatic counter-pressure washing device - Automatic roller washer - Powder: Grafix - Alphatronic 200 - High pile delivery - Standard accessories - Machine is in production. - Location of the machine: Germany
used
Swing bending machine KRAMER type A toll. II 1000 Fabr. No. 48 287 Year of construction 1990 Usable length 1060 mm sheet thickness 3.75 mm Stroke of the upper cheek 180 mm Adjustability of the bending cheek 60 mm Backgauge 480 mm Drive power Bending cheek drive 4 kW Drive power Upper cheek drive 1.5 kW Mains connection 400 Volt, 50 Hz - manual and semi-automatic control - Angle adjustment via angle dial - one-piece pointed rail 135 - Backgauge with hand crank adjustment and simple dimension scale - continuous stop rail - electric foot switch, 3-fold space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 ton. good condition; used
used
Item condition: maintained Availability: immediately technical data: see documents (download) The ALWID-KRONE-NV/HV is a semi-automatic filling machine, the with low vacuum (NV) or high vacuum (AGM). This allows a Filling of the same height, i.e. the filling level is identical in all containers is. In addition, the filling speed is due to the vacuum higher than with a Drop pressure filler. The ALWID-KRONE-NV/AGM is responsible for the Filling of all low to high viscosity, Suitable for still liquids (e.g. Es- Spirits, edible oils, liquid Liqueurs).
used
Flexicon FF20 bottle filler Semi-automatic vial filler with stainless steel table + PD12 flexicon pump + FC10 flexicon screwdriver
used
Perfection: 2/2, 4/0, Automated Perfecting Device, Electronic Double & Missing Sheet Control, Steelplate in Feeder & Delivery, Inking Unit Temperature Control, Alcolor Automatic Film Dampening with Technotrans Refrigeration, CP 2000 Control Center, CP 2000 Istant Gate, CP 2000 MasterLevel, Autoplate (Semi-Automatic Plate Loader), Auto Wash-Up Devices for Ink Rollers, Blankets and Impression Cylinders, Preset Feeder Automatic Paper Size, Non-Stop Pile Feeder, Technotrans Air Cooled, Electronic Pullay Control, High Pile Delivery, Non-Stop Delivery, Grafix Powder Sprayer, Eltex Antistatic Device, Speed: 13,000 sheets/hour
new
TECHNICAL DATA LIBRA 35 - 110 Usable working width 1100 mm min. and max. working height 4 ÷ 170 mm Sanding belt width 1115 mm Sanding belt length 1900 mm Motor power 400 V 50 Hz 11 (15) kW (HP) 2 carpet feed speeds 4.5/9 m/min Feed motor 0.3/0.55 Elastic link grinding shoe (sector spacing 56) With 20 sectors with adjustable pressure and with 2 contact inserts 1. Semi-hard contact insert made of a flexible steel foil with felt (density 0.68) and graphite coating (suitable for sanding veneered panels and solid wood) 2. Soft contact insert made of a flexible steel foil with rubber and felt (density 0.68) and graphite coating (suitable for grinding veneered or painted panels) Unit R: - with ribbed steel roller ø 120 mm and decimal correction of grain/strip thickness Combi unit TC: - with rubber-coated roller 45 Sh ø 120 mm and decimal correction of grain/strip thickness - H ...
used
A used offset printing machine Ryobi 784E Year 2006 Print number: 80Mio Double sheet control - electronic Automatic paper thickness adjustment Automatic blanket washing device Automatic paint roller washer RPC Semi Automatic Plate Change (Halbautomatischer Plattenwechsler)
used
We sell here the Robot Coupe Blixer 45 A, 45 L, as can be seen in the pictures, with the accessories shown. This device gives you two features in one! : The Blixer combines the features of two well-known devices in one - that of a cutter and that of an emulsifier-mixer device. It makes it possible to mix all kinds of raw and cooked foods into liquid, semi-liquid or pulpy end products Efficient: Thanks to its large liquid capacity and its lid with wiper and sealing ring, this appliance allows you to prepare all kinds of mixed food and even tube feeding. Reliable: Knife with patented new blade profile for optimal cutting quality. Regular cutting and guarantees perfectly uniform processing even with the smallest quantities. This device is equipped with 2 blades as standard, but can be optionally extended to three blades. The third blade can be ordered for an extra charge. Due to th ...
used
for sale Calumatic semi-automatic bottle washer, CRW model, complete with infeed rotary table and control panel. usable in various sectors of activity: pharmaceutical, chemical, cosmetic, food, dietetic or medical. the complete manual of the machine is available. price on request.
new
4-head stand-alone linear weigher for weighing up to 1,000g. Including framework for small 2-/4-head weighing systems to avoid the transfer of machine vibration to the weigher. Without stairs, without handrail. Made of stainless steel (SUS 304). - Size will be customized. Button to open the weighing head when using the weigher for semi-automatic filling. - Specifications: Number of weighing heads: 4 | Volume per head: 2.4 L | accuracy: 0.5-5.0g | max. speed of the machine in neutral: 40 cycles/minute | power: 220V, 1kW | machine dimensions in mm: L920xW775xH(customized) | eight: 169 kg (without framework). Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for custo ...
used
ZEMAT PULSA ECO 500 impulse welding machine was built in 2019 in Poland. The compact machine with an open design is ideal for the efficient production of canopies, awnings, pergolas, roller blinds, banners, etc. The individual temperature control of the upper and lower sealing electrodes together with InvisiWELD technology produces strong, practically invisible seams with high precision. Furthermore, the operator has special hand tools at his disposal for the welding of, e.g. tabs, pockets and zippers. The ZEMAT PULSA EC semi-automatic impulse welder was implemented in production in 2023 and since then has been used for only a dozen tests. The total weight of the machine is 1800 kg. Technical specifications of the ZEMAT PULSA ECO 500 welding machine - machinable materials: PVC, vinyl, polyurethane (PU), polypropylene (PP), polyethylene (PE), rubber, acrylic, thermoplastic materials ...
used
Hipermak HPR Auger Filling Machine Semi-automatic Machine never used before,it is like new
new
FLOWwrapping machine to do multipacks of slices without trays (cake, biscuits, bread, etc.). Suitable for OPP/PE, PT/PE, AL/PE film material. Semi automatic format adjustment (fully automatic for length) using colour touchscreen. Reliable and smooth run through 3 high performance servo motors, automatic separation of hot parts and film when machine stops, modul to avoid crumps falling down. - Technical Specifications: packaging sizes (LxWxH in mm): a.) 90-400, 35-120, 5-40, b.) 100-400, 35-120, 15-60, c.) 130-400, 35-120, 30-85 | film width: 450mm | max. speed of the machine in neutral: 110 cycles/min | 9kW, 380V, 50Hz | machine dimensions: L4300xW350xH1960mm | weight: 1300kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In ad ...
used
Semi automatic mixing and packaging plant for powders 190 lt
used
Behringer HBP 430a Rect-Cap (H) 431.8 mm Rect-Cap (W) 431.8 mm Rounds-Cap 431.8 mm Square-Cap 431.8 mm Power 5.5 kW Type (Auto, Manual, Semi) Auto Blade Width 50.8 mm Blade Thickness 1.6002 mm Blade Length 5,791.2 mm
used
Perfector 2/2, RCI CCI Comand Table, SAPC Semi Autoplate Change, Rolandmatic Dampening with Technotrans Cooling Refrigerator, Auto-Wash, Roland Mabeg Jet Feeder, Steel Plate on Overlap, Steel Plate on the Lining, Non-Stop Device, Super Blue, Bacher Registry System Quick Bars, Powder Sprayer, High Pile Delivery, Capacity: 15000 Sheets/h, Paper Thickness: 0,04-0,6mm, Max Paper Size: 53x74cm, Min Paper Size: 26x40cm, Start of Print: 9.5-10.5mm, Plate Format: 605x745, Plate Thickness: Max 0,3mm, Standard Accessories)
used
Wire EDM machine Ona AE 300 Semi-new in perfect working condition.
used
Used SJIII S100 Flowpack packaging machine for liquid and semi-liquid blisters new, never used for company reconversion reasons and remained unused. Tecnical details in the photos
used
Food Tools CS4AAC round cake slicer Serial: 3697 2007, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts, mobile
used
Semi-new automatic cellophane wrapping machine with double sealing mass and 6 station feeder. Can be used for non-shrink cellophane wrapping.
used
Food Tools CS4AAC round cake slicer Serial: 5250 2015, semi auto cake cutting machine will portion a variety of frozen and chilled round products such as cheesecakes, cakes, pies, frozen pizzas and more, up to 150 products per hour, comes with two cutting inserts and spare blade, mobile