semi automatic used for sale

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Technical data Diameter of work admitted: 4.00 mm Max. turning length: with flat cames: 28 mm Spindle hole: 6.00 mm Max. treading diameter: 4 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 14 from: 2000 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 350 kg Overall dimensions machine: Length: 1000 mm Width: 700 mm Height: 1300 mm

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Variocam: VNSA Controlled spindle stop device N

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Electric control-box Speed accelerator Controlled clutching device

Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.0 HP Machine´s weight about: 520 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Combined 3-spindle attachment: 13Y Simple spindle stoping device Electric control-box Controlled clutching device

Technical data Max. work piece diameter: 15 mm Turning length: 70 mm Spindle hole: 15 mm Max. treading diameter: 8 M (Metric) Production capacity: 28 - 2100 pce/h Spindle speeds: Number of spindle speeds: 12 from: 900 rpm up to: 6500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 1.5 HP Machine´s weight about: 650 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1500 mm Various accessories: Pick-up attachment Gripper device Vertical support Bar loader number of bars: TRAUB Type: B3000 Length of bars max.: 3200 mm Slotting attachment Drilling tailstock Workpiece counter Protective cover

Technical data Number of spindles: 8 Capacity round bar: 45 mm Capacity square bar: 31.3 mm Capacity hexagon bar: 38.5 mm Machining rate: from: 7.1 sec up to: 922 sec Spindle speeds: number (steps): 24 from: 96 rpm up to: 1243 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 12700 kg Overall dimensions machine: Length: 6630 mm Width: 1600 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 100 F

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Back drilling attachment Slotting attachment Pick-up attachment 34 DA,

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Pick-up attachment 34 DA, Controlled clutching device

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Back drilling attachment: 12AD Milling attachment: 14EA Slotting attachment Pick-up attachment 34 DA,

Technical data Number of spindles: 6 Capacity round bar: 26 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/33P Coolant system Thread rolling attachment: 1 x Longitudinal slide number: 2 Drilling unit with independent feed: 6 x Appareil à rouler les filêts à commande mécanique Tool break control Turret number of tools: 6 x Threading attachment: tangent.

Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 60 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1650 rpm up to: 11680 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1500 mm Various accessories: Combined 3-spindle attachment: 13Y

Technical data Diameter of work admitted: 13 mm Max. turning length:: 70 / 50 with bell cames: 110 / 50 mm Spindle hole: 13.5 mm Number of tool cutters: 5 (8 x 8 mm) Spindle speeds: from: 700 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 1800 kg Overall dimensions machine: Length: 2000 mm Width: 1055 mm Height: 1750 mm Various accessories: Combined 3-spindle attachment: 13Y Controlled spindle stop device O Speed accelerator: VNSA

Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: 3-spindle drilling attachment: 12 V

Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 2200 mm Width: 1000 mm Height: 1700 mm Various accessories: Speed accelerator: VNSA Variocam 3000 Set of loose pulleys 3 spindle front attachment: 12 V

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Combined 3-spindle attachment: 13 OA Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 11.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1700 rpm up to: 12000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 800 kg Overall dimensions machine: Length: 1440 mm Width: 900 mm Height: 1600 mm Various accessories: Back drilling attachment: 12 AD Electric control-box Swivelling stop Central lubrification

Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Electric control-box Speed accelerator

Technical data Number of spindles: 6 Capacity round bar: 42 mm Capacity square bar: 30 mm Capacity hexagon bar: 36 mm Max. stroke of long slide: 125 mm Machining rate: from: 0.9 sec up to: 280 sec Spindle speeds: number (steps): 49 from: 140 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 6516 mm Width: 1588 mm Height: 2100 mm Various accessories: Automatic bar loader (num. bars): IEMCA PRA 40/35 P (1999) Pick-up spindle Toolholders Boring tool holder Back operating device

Technical data Diameter of work admitted: 6.35 mm Max. turning length: with flat cames: 62 mm Spindle hole: 6.35 mm Number of tool cutters: 3 Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Turret slide: number of tools: 4 Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm Various accessories: Decoiler Straithening device Coolant system turret

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13 Y Back drilling attachment: 12 AD Pick-up attachment: 34 DA Electric control-box

Technical data Number of spindles: 6 Capacity round bar: 13 mm Max. advance of bar: 63 (125) mm Max. stroke of long slide: 50/31.5 mm Machining rate: from: 0.24 sec up to: 75 sec Spindle speeds: number (steps): 47 from: 560 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 3400 kg Overall dimensions machine: Length: 3055 (5161) mm Width: 930 mm Height: 2500 mm Various accessories: Bar feeder Set of toolholders Chip conveyor

Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Coolant system Chip conveyor

Technical data Number of spindles: 6 Capacity round bar: 20 mm Capacity square bar: 14 mm Capacity hexagon bar: 17 mm Max. advance of bar: 80 mm Max. turning length: 39.6 mm Max. stroke of long slide: 63 / 39.6 mm Number of possible pieces: 31 Machining rate: from: 0.36 sec up to: 95 sec Spindle speeds: stepless from: 355 rpm up to: 5000 rpm Voltage 50 Hz 3x: 380 Volt Power: 15 kW Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3125 mm Width: 1030 mm Height: 2000 mm Various accessories: Bar feeder: CUCCI Threading attachment: OERTLINGHAUS Coolant system Chip conveyor: KNOLL Toolholders

Technical data Number of spindles: 6 Capacity round bar: 42 mm Max. turning length: 125 mm Number of cross slides:: 6 Spindle speeds: from: 140 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10500 kg Various accessories: Threading attachment Pick-up spindle

Technical data Number of spindles: 6 Capacity round bar: 42 mm Max. turning length: 125 mm Number of cross slides:: 6 Spindle speeds: from: 140 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10500 kg Various accessories: Pick-up spindle Back drilling attachment

Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 10 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1200 mm Width: 900 mm Height: 1450 mm Various accessories:

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Drilling attachment 12 U Variocam: VNSA Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 6 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Variocam: VNSA Controlled spindle stop device N Electric control-box Preparation for loader: Barboy Rocker arm with 1/1000 mm

Technical data Number of spindles: 6 Capacity round bar: 42 mm Capacity square bar: 30 mm Capacity hexagon bar: 36 mm Max. stroke of long slide: 125 mm Machining rate: from: 0.9 sec up to: 280 sec Spindle speeds: number (steps): 49 from: 315 rpm up to: 2240 rpm Voltage 50 Hz 3x: 380 Volt Power: 22 kW Machine´s weight about: 10000 kg Overall dimensions machine: Length: 6500 mm Width: 1400 mm Height: 2100 mm Various accessories: Bar feeder Chip conveyor

Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator

LABELED PERFORMANCE PACKAGE MEASURES 25/100 packages per minute (depending on package size). Length: 60mm minimum, up to 540mm Width: 40mm minimum – up to 290mm maximum. Height: 1mm minimum – up to 250mm maximum PACKAGE WEIGHT THERMAL PRINT HEAD PRINTER TICKET STICKING HEAD COMPRESSED AIR SUPPLY UNITS 20g up to 6000gr. RESOLUTION 7.5 POINTS Thermal Printer By vacuum blowing Kg, g, lb, pieces. 6 bar, minimum 230 l/minute free of oil and water. OPERATING TEMPERATURE ROLL DIMENSIONS LABEL DIMENSIONS DEGREE OF PROTECTION 0ºC to 40ºC standby up to -10ºC Core diameter (joint): 76mm. Outer diameter: 300mm. Roll width: 22.50mm – up to 122.5mm maximum. WIDTH MIN:30MM- MAX 100MM HEIGHT MIN: 30MM -MAX 100MM DISTANCE BETWEEN LABELS: MIN 2MM-20MM DIN 40050, IP65 (Display and keyboard) CONTROL CABINET AND LABELLING SCALE MANUFACTURE OF THE MACHINE EXTERNAL DIMENSIONS IP54 LOCATION. IP20 Full  ...

We have refurbished the Nesbad box machine with logic / display, compressed air groups, protectors as well as a safety circuit.

- Automatic tool change - Sheet metal centring system - Shear for sheet metal cutting - Control: SALVAGNINI - Bending height max: 254 mm - Bending width max: 2.540 mm - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 3 mm - Maximum material thickness steel: 3.2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Dimensions (long x wide x high): 14.000 x 8.750 x 2.900 mm mm - Weight: n/a kg

cutting range: max. 371 x 371 mm feed:: 800 mm 8-fach weight of the machine ca.: 5 t : : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

High-quality PLC – controlled automatic 90° under-table – straight-cut circular saw machine, for the rational cutting of profiles made of aluminium – non-ferrous metals – plastics – wood and other soft materials Smallest possible section length 5 mm Largest stroke of the feed clamping stick 620 mm (feed length unlimited) Infinitely adjustable feed speed Feed accuracy +/- 0.2 mm Horizontal and vertical material tension Largest saw blade diameter 450 mm Cutting area - - 300 mm x H 50 mm - 260 mm x H 98 mm - 240 mm x H 100 mm (see the figure with the section diagram) Saw blade speed 2,800 rpm Saw blade drive power 2.2 kW Dimensions approx. 1.5 x 0.9 m x H 1.36 m Weight approx. 440 kg

Make Shoei Model SPT52-4K Year 1997 Minimum size 120 x 135 mm Maximum size 520 x 850 mm Configuration Feeder Flatpile feeder with sheet seperator head 1st station 4 plate buckles 520 mm 2nd station 1 knife Shoei52 Delivery belt delivery Minimum fold 65 mm Details with batch counter, noise hoods, vacuum pump Condition very nice machine, very good rollers !

Automatic band saw Fully automatic machine Price on request!

- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg

turning diameter over bed: 50 mm spindle passage: 26 mm turning length: 275 mm total power requirement: 12 kW weight of the machine ca.: 4500 kg CNC-Sliding Headstock Lathe, Opposite Headstock The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

4 up Thermal CTP Agfa CTP (Thermal) Model: Acento-S Built: 2006 size 660 x 830 mm Min. size 324 x 370 mm Autoloader Inline punch Stacker Chemical free Include Rip (Apogee 8) + Software Price: on request

4 Buckles FIRST UNIT 4 Buckles SECOND UNIT Flat pile feeder Digital counter Digital program Air compressor Belt delivery