semi automatic used for sale

Conveyor belt system mobile, SID - TBS - 300KN-1, year of construction 2019, load capacity 300 KN, connected load 32A, mains voltage 400V / 50 Hz Auction-ID: A1-51285-340

Brand: KÖGEL Type: SNCO 24 First registered : 26/03/2002 Chassis Number: WK0SNC02420796470 MAW: 39,000 kg Curb weight according to certificate: 6,330 kg Total length: 13.98 m Wheelbase indicated: 7.70 m Red chassis with side guards, mudguards and kickstands Registration certificate and certificate of conformity photographed Visible condition: corrosion and significant deterioration of the floor, with several parts missing leaving the sleepers visible. Repairs to be planned. Last technical inspection presented: valid until 25/03/2023. The report mentions corrosion of the chassis and springs, as well as a defective attachment of additional equipment. Current state of braking and roadworthiness to be checked. Auction-ID: A3-46109-35356

Brand: RAUW Model: SA 39/3 Gross vehicle weight indicated: 39,000 kg Maximum axle load: 9,000 kg Maximum Swivel Load Indicated: 15,800 kg Open top with high and perforated metal front apron Weweler mechanical stands LHD2000 Side guards and mudguards

Tipper semi-trailer equipped with a recent Fassi hydraulic crane, in perfect working order. Features: Trailer brand: Langedorf Type: SK18/25 – tipper 1st registration: 1992 Last registration : 21/11/2024 Registration: Q-ATA-290 (Belgium) VIN: 17180-02 Air suspension Axles: 2 Masses: Empty weight: 9,500 kg MAW: 31,500 kg Payload: ±22.000 kg Crane: Brand: Fassi Model: F235A.2.23 E-Dynamic Year: 2025 Power supply: 24V Remote Control + Manual Controls Hydraulic Stabilizers Equipment: Steel body WABCO Brake System Storage box Mechanical Stands Status: Crane in excellent condition, perfect functioning (tested) Skip with traces of wear and oxidation Tyres in used condition Documents: Certificate of Registration (Part I & II) Identification Report Notes: Sold as is, without warranty Unverified technical inspection Tractor not included Highlights: Fassi 2025 crane (very recent) Remot ...

Brand: Schmitz Cargobull. Type: S01. Chassis number: WSM00000003125870. Length indicated on the plate: 13.90 m. Width: 2.55 m. Maximum weight allowed according to the plate: 39,000 kg. Maximum axle load: 9,000 kg. Maximum load on pivot: 12,000 kg. Open top with front wall. JOST parking stands. Side protections. The papers of the semi-trailer are present and will soon be added as a photo to the ad. Auction-ID: A3-46109-35351

Consisting of 2 benches of approximately 160x68x116cm seat height 77cm 1x round table 120cmø Auction-ID: A1-47451-274

Extendable up to 19 meters, intermediate table, rigid axles, spare wheel, breakers, support legs. Auction-ID: A1-47424-701

16000 KM RUN Featured; MOT; Recently replaced tires; Disk connection; Air suspension Auction-ID: A1-47424-2506

STAS S234CX 2-axle aluminium tipper trailer – 27.990 kg payload – grain scrapers – 2009 Specifications: Brand: STAS Type: S234CX Version: C1B / A12 Chassis number: YE6S234CX8A120463 First registration: 15-12-2009 Construction Date: 2009 Body: aluminium tipper Tipping Direction: Backward Number of axles: 2 Suspension: leaf spring suspension Brakes: drum brakes Tyre size: 445/65 R22.5 Tyre profile: approx. 30% all around Axle distance: approx. 1.30 m Technical axle load: approx. 10,300 kg per axle Tare weight: approx. 5.010 kg Payload: approx. 27,990 kg Maximum permissible total weight: 33,000 kg Overall dimensions: approx. 800 x 260 x 270 cm (L x W x H) Cargo box colour: green Features: Lightweight aluminum body Hydraulic reverse tipping function Hydraulic telescopic tipping cylinder at the front Double rear doors 2 manually operated grain chutes/d ...

1996 Müller-Mitteltal 3-axle curtainsider semi-trailer – BPW – lift axle – steering axle – sunroof Müller-Mitteltal 3-axle curtainsider semi-trailer, built in 1996. Equipped with curtainsiders, sunroof, 3 BPW axles, air suspension, liftable first axle and steered rear axle. Specifications: Brand: Müller-Mitteltal Type: 3-axle curtainsider trailer / curtainsider Year of construction: 1996 Number of axles: 3 Axles: BPW Suspension: air suspension 1st axle: lift axle 3rd / rear axle: steering axle Braking system: drum brakes Tyre Size: 385/65 R22.5 Tyre tread 1st axle: left approx. 10 mm / right approx. 8 mm Tyre profile 2nd axle: left/right approx. 10 mm Tyre tread 3rd axle: left approx. 6 mm / right approx. 10 mm Tare weight: 5.900 kg Payload: 28,600 kg Maximum total weight: 34,500 kg Dimensions of cargo space: approx. 9,000 × 2,500 × 2,080 mm (L × W  ...

Manufacturer: Meiller Machine type: 2-axle tipper semi-trailer body (demountable) Model: Meiller MHKS / Asphalt tipper body Year of manufacture: 2004 Serial number (VIN): W09SHL2334MM08461 Permissible gross weight: 33,000 kg Axle load 1: 15,000 kg Axle load 2: 9,000 kg Axle load 3: 9,000 kg Suspension: Air suspension Brake system: WABCO EBS Body: Steel insulated tipper body with hydraulic rear tailgate Tarpaulin: Manual roll-over tarpaulin Rear platform: Yes Manufacturer: Meiller, München (Germany) Remarks: Insulated asphalt tipper body, suitable for hot asphalt transport. Air suspension, WABCO EBS braking system, hydraulic rear door, manual tarpaulin. Surface corrosion visible on tailgate and body edges. Trailer sold as shown. Auction-ID: A1-50932-136

Equipped with: outriggers, bucket 30 m3, automatic tarpaulin, hydraulic tipping, Auction-ID: A1-47424-809

2001 Nooteboom OSD-48-03V/L 3-axle extendible semi low-loader – 45.000 kg – Dutch registration Specifications: Brand: Royal Nooteboom Trailers Type: OSD-48-03V/L Year of construction: 2001 Date of first admission: 29-11-2001 Chassis number: XMROSD00010000910 Number of axles: 3 Tare weight: 10.480 kg Maximum permissible mass: 45,000 kg Calculated payload at 45,000 kg: approx. 34,520 kg Maximum axle load regular: 3 × 9,000 kg Type plate Special Transport states a maximum of 48,000 kg and 3 × 10,000 kg under applicable conditions Registered total length: approx. 13,230 to 19,930 mm Extension range: approx. 6,700 mm Features: Extendible semi lowloader / semi-lowloader 3-axle air suspension chassis Extendable chassis Particularities: Dutch registration available MOT valid until 12-02-2027 PLEASE NOTE: this vehicle has a license plate registration. Upon  ...

Equipped with: Steering axle. Carrier Vector 1850 MT-temperature refrigeration unit hours stand 13947. Dhollandia DHSM.20 hydraulic tail lift with 2,000 kg lifting capacity at 1,000 mm load center of gravity. Auction-ID: A1-47424-1750

Partially integrable Miele dishwasher for a 60 cm kitchen niche, with visible control bar and clear remaining time display. • Capacity: 13 place settings • Cutlery basket • Five programs: ECO, Automatic, Intensive, Normal 55 °C and Fine • Start preset up to 24 hours • ComfortClose door system • Waterproof system • Noise level: 46 dB(A) • Energy efficiency class: A according to the scale of the time • Device dimensions H × W × D: approx. 80.5 × 59.8 × 57 cm • Device height adjustable up to 87 cm Auction-ID: A1-51488-407

Featured; can be done on 12 volts and can be converted to 24; 3 sided goalkeeper; Buckets of 6 M ; Remote control; (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47424-2502

Softwood semi-circular post with a diameter of 100 mm and a length of 200 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45127-2252

Softwood semi-circular post with a diameter of 100 mm and a length of 200 cm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), suitable for outdoor applications. Auction-ID: A1-45127-2251

Softwood semi-circular post with a size of ø80×2000 mm. The post is crowned, which ensures a neat finish on the top and better drainage. Executed in KDI brown (pressure impregnated), making the pole suitable for outdoor applications and has increased durability. Auction-ID: A1-45127-2253

Automatic Shrink Wrapper automatic overlapping film Technical Specifications & Performance Data L 12,500 mm x W 1,700 mm x H 2,200 mm, approx. 4,650 kg, 50 Hz. Fully automatic with overlapping film and a welding bar system for secure seals. The machine supports straight-through or 90° infeed configurations and produces film-only multipacks or film plus flat carton/tray bundles, with format changes handled through recipe settings and mechanical guides. Throughput is up to 30 bundles/min (format- and product-dependent). Category: Shrink Wrapper (automatic overlapping film, welding bar) Condition: New Production speed: up to 30 bundles/min (format- and product-dependent) Infeed: Multi-lane conveyor grouping with straight or 90° orientation options Bundle options: Film-only and film with flat carton/tray (configurable) Film handling: Overlapping shrink film with adjustable welding bar widt ...

Capacity: 125 ton, Strokes per minute: 85-500 / min, Slide: 870 x 550 mm, Plate width: 260 mm, Year of manufacturing: 1980

Precast - Wall - Filigree - factory. Good as new circulation system: 60 pallets with 3.5 mx 8 m, 3 x lateral transport of pallets - Facilities, 1 x vibrated concrete station, new control - Beckhoff. Concrete distributor Crane 1.4 m³. Friction wheels. Roller blocks. Planning and installation as required. Formwork on request. Is dependend on the application. For low cost housing, cmodul austria low cost housing Affordable housing Low-cost housing Mixing system 1 m³ at extra charge. Tilting device if needed for concrete slabs vertical-tansport at extra charge. Cran for stock handling at extra charge. Projects for social housing are our daily work. Civil work plans, drawings and calculations, we can create for you. Similarly, profitability calculations.

automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2

Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052

Herding® Multicoater Unused New, 3 pieces available e.g. film coats of tablets During the spraying phase, a very fine dust is produced during the film coating of tablets, which is extracted from the fluidized layer into a filter device with a defined air flow. The dust is sticky and without the precoating material forming a protective layer on the filter, the surface would stick very quickly. The Multicoater is a pneumatically operated dosing device and is usually operated with inert gas. It consists of a template container including control and conveying technology and is filled via a loading opening in the housing cover. The dosage is done via an injector pressure pump with a flow rate of 1.3kg/min. The MultiCoater has an internal control system that automatically controls the flow of the fluidizing, conveying and rinsing sequence.

Rod tube

multi spindle automatic lathe Schuette SF 13 built in 1991 - pick up with back side tooling -Thread cutting gear - chip conveyors - PLC control and much more.

AUTOMATIC HYDRAULIC GUILLOTINE type MONGUZZI TRA 2600 Second hand machine Volt. 380/50 Working conditions : good Technical details : max. useful cutting length mm. 2650 max. useful cutting heigth mm. 100 max. useful cutting width mm. 1000 min. useful cutting width mm. 40 hydraulic motor power Hp 5,5 net weigth kgs. 2600 CE mark : NO

12 stueck, see pictures

Max sheet size 1300 x 1100 mm min. Sheet size 350 x 350 mm Precision +-1.5 mm Speed 6,000 sheets / hour Power 12 kW Length 12,5 m Weight 6.8 t

High-performance band sawing machine for cutting pipes and round material in multi-channel process with symmetrical material supply and discharge on both sides Manufacturer ZS-Technology Meissen Type MKS 6/2 Built in 1998 - 9 two-sided assignable pipe ducts - max pipe length 8,000 mm - Cycle time approx. 90 sec. / Stroke=5 sec. / pc. - max. section length 100 mm - Diameter 20 - 100 mm Materials Structural steels, C-steels, low-alloy steels, rolling bearing steel (especially 100Cr6) Pipe dimensions / pipe sections - Pipe outside 25 - 128 mm - Pipe wall thickness 3.2 - 16 mm - Pipe length 6,000 mm Required footprint for all components 7,000 x 16,200 mm Search terms: band saw machine, multi-channel band saw, backdrop band saw, high-performance band saw machine

HEIDELBERG Stahlfolder RFH 66/4 BCUH of 2007 16 pages combined. International - English & German fold A folding machine of 66 cm, config; -1St unit 4 x. Pockets, round pile feeder + 3 x. Knives KTL = 16 pages - int. English or German folds > > Option: VF-66 2006 - Mobile knife / total fold 32 pages < < Delivery St. Unit TSH 70 presser stacker Condition; VERY GOOD condition, immediately available, Can be lakes in our factory at Strasbourg FR

Multi spindle automatic lathe Saeid 13-6 DNT SF Year of construction 1989 Adjustment of speed and cycle time by servo motor Facilities: -Pick-up device with rückw. Editing -Thread cutting gear -Waheed clear text display -pivoting control panels -PLC control etc.

Rod lathes Thiel

GUK Slitting Machine RS 21/760 Technical details: -No double bows, false bows and no risk of mixing! -Insensitive to static charge -approx. 20% cost savings compared to processing batch goods -Automatic control of the cutting position -Synchronous control of the print mark -Installation of code readers additionally possible -Storage in maintenance-free needle and ball bearings -Paper roll on top, single or double roll stand -With and without integrated adhesive table -Drive left or right, with chain or timing belt -Smallest fold 15 mm -With automatic roller changer ARW 21 Specifications: -Min. format: (WxL) 60 mm x 105 mm -Format: (WxL) 210 mm x 315 mm -Roller outer diameter: max. 600 mm -Roll core diameter: Europe 70 mm USA and Japan 76 mm or 152.4 mm or 3 inch or 6 inch -Power: 300/minute, depending on section length -Capacity: For paper roll by. 600 mm, sectio ...

Available for sale 2 x NEVER USED Leroy Somer Automatic Voltage Regulator R713. The 3F R713 or R723 modules are used in connection with a R200 series regulator for equalizing the voltage of an alternator with that of the network before coupling, when the installation operates automatically or when manual equalization of these voltages is not possible. This prevents excessive current caused by coupling a network to the machine when both are not at the same voltage. This difference in voltage is usually due to fluctuations in the network voltage because the alternator is regulated at a constant voltage except for cases of voltage droop). On some networks these fluctuations can reach ± 10%. Equipment never used and in good working conditions. Consumption: < 2VA Response time: < 300 ms Dissipated power: < 1W Temperature Shift: 1% of Un for delta T ambient variing from -20° to 2 ...

Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine no.: 7.0176 Year of construction: 1987 Weight: 11t General / technical data: Portal-6spindle automatic lathe with measuring device and automatic feeding Spindle dividing circuit: 300mm Number of longitudinal slides: 6 Number of cross slides: 2 gr. cross slide stroke: 60mm gr. longitudinal slide stroke: 125mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Stepless 1.95 – 78 sec. Low time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20kW; Feed rates 8kW Installation area: approx. 1720 x 4700mm Remark: The machine cannot be converted for bar work. Equipment: – 1 creep gear drive for set-up operation – 1 automatic central lubrication device – 1 coolant device with lines and pu ...

Drill grinding machine drill Grinding drillautomaticallys automatically in one clamping. maximum drill diameter 60mm (probably 80mm) Also suitable for drills with three or four cutting edges. Ready for immediate use. Simon SP50 SP80 Special price

Schuette multi spindle automatic lathe Pour SF 20-6 Curve controlled number of spindles: 6 with mechanical transmission Rod diameter: approx. 20 mm SW 17 mm AK 18 mm UK 14 mm Max bar feeder: 80 /(160) mm Independent longitudinal slide number: 6 Total / working ways (Standart): 63/40 mm "" (Special) to: 100/63 mm Number of independent cross slide: 6 Total / working ways middle and upper carriage up: 32/20 mm Lower carriage up: 40/25 mm Spindle diameter: 224 mm Main time min/max: 0.36/150 sec. Productive time min./max.: 0.45/0.80 sec. Spindle speed from / to: 900-5000 U/min 2. area: 355-2000 U/min Nominal power of the motor: 15 KW Power supply: 50 kVA The drive motor speed: 1500 rpm Length width (standard execution) 3705 1320 mm incl. Rod Guide (standard execution) 6335 mm Approximate weight without rod guide and accessories: 4.6 to. the rod gu ...

Qty. 1 Second-hand automatic sheets (pallets) storage system Mfc.: MATTER S.R.L Built: 2002 Model: Mat 00.6 Number of Automatic Retrieval Cars: 2 Number of drawers: 756 Pallets Dimension of Pallets: Width: 1000/1500 mm / Length: 2000/4000 mm / Height: 250 mm Max. Pallet Weight: Max: 3000 kg Maximum speed of Retrieval Cars: Y Axis: 11 m/min . / X Axis: 58 m/min. / Z Axis: 20 m/min. System is working with Picking Station for separating and handling of pallets Dimensions of the system: Length: 74 meters x Width: 9.40 Meters (not including the picking station) X Height: 9.6 meters ( 9 rows )

We are here to provide an L type automatic sealing machine, which is widely used in a variety of industries due to various reasons. Our machine is available in a variety of specifications. A loading and cooling zone is supplied as standard output. A heat-resistant, powder-coated carrier was used. It is very easy to install and easy to use. Conveyor roller made of stainless steel and silicone coated. Power-coated tunnel covers for heavy duty and an electrical control panel are included. Capacity: 50 pieces/min Voltage 380V/50-60Hz/3-phase Main Material: Stainless Steel The internal circuit type is suitable for PVC. PP. POF packaging material. Extra-long shrink tunnel, intelligent temperature controller with figure and closing heat wind inner circuits.

Technical data: -Saw blade size 300 mm -Blade rotation speed 2800 RPM -Section - 90 ° 160 x 20 mm 100 x 80 mm -at 45 ° 100 x 40 mm -Adjustable miter vise -Drive 380 V / 1,5 kW - space requirement approx. B H 400 x 1400 X 700 mm -Weight approx. 80 kg -with:-vert. -Vice - machine stand -Feed roller 2000 mm -Evacuation roller conveyor with MaÃ? attack with analog display via Handwheel movable 3100 mm

Technical data:-Roll diameter 420 mm -Throat depth 410 mm -Max volume height 265 mm -Table size 600 x 600 mm -Table li. + re. Tiltable 15 / 30 ° -Table height 1020 mm -Blade length 3150-3260 mm -Saw band width 3-16 mm -8 speeds 12-375 m / min -Drive: 400 V / 1.1 / 1.7 kW -Weight approx. 650 kg -Space requirement approx. B 900 x H 1900 X 1000 mm -with: - blade welding machine in the machine base - grinding wheel and lamp -Scissors, air pump and lighting

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

8-spindle rotary machine Built in 1989; serie 25 Refurbished in 2012 • New electrics • New bearings • Guided tours • CNC cross slide in position 7 • Spindle stop setup • Material rod guide • Chip conveyor • Pick-up spindle position 8 • Calibration device • Various tool holders • Various curves

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

Swiss type CNC Manurhin KMX TWIN 207 is a double-spindle automatic machine with automatic feeding of bars. The CNC lathe was produced in 2000 in France. Technical data : - type of automatic lathe: Swiss Type - control: NUM - Swiss control - number of axles: 6 - turning diameter up to: 20 mm - diameter of passage Ø: 28 mm - number of turns: 150-8000 rpm - feed: 10/15 m / min - number of tools: 8 + 8 + 4 + 4 pcs - spindle power: 2.2 kW - tailstock: counter spindle - machine weight: 5000 kg Lathe equipment: - two main spindles / two opposite spindles - material feed with FMB Doppel-Turbo - counter spindle: 150-6000 rpm - chip conveyor - Manurhin / Schlichting-System clamps - coolant filtration