136,809 used machines on RESALE, but how to find them? Machine Search
Used automatic edge banding machine FRAVOL, Italian made, model R9 of the RAPID series. It applies PVC, ABS, melamine, veneer and solid wood edging, in strips or from the roll. A compact and sturdy machine, suitable for both industry and small workshops. The machine heats up quickly and is ready for work in 8 - 10 minutes. The pressure units are adjusted automatically, with a pressure bar with a double row of wheels. The two motors of the end trimming unit are adjustable from 0 to 15 degrees and are powered by a 200 Hz frequency converter (inverter). Technical data: Panel thickness: 10 - 60 mm Minimum panel width: 60 mm Minimum panel length: 140 mm (PVC) Edge band width: 15 - 65 mm Edge band thickness: 0.4 - 15 mm Feed rate, adjustable: 6 - 16 m/min Glue pot capacity: 3 kg Voltage: 220/380 V, 50/60 Hz, three-phase Installed power: 7.5 kW Pneumatic pressure: 6 bar Weight: 1900 kg For t ...
Semi-automatic band saw EISMO BOMAR Year of construction: 2016 Bevel cut 45° Max cutting capacity: Ø 260 mm Max vise opening: 300 mm width Motor: 1,5 KW Hydraulic vise Variable speed drive on the blade rotation Automatic descent Lubricant pump Microspraying system Supplied with some new blades Voltage: 380 V Length: 2000 mm Width: 1200 mm Total height: 1400 mm (in low position) Weight: approx 500 KG
The system is designed for the semi-automatic gluing and pressing of finger-jointed box bodies made of solid wood and plywood, the system is floor-mounted and can be manually adjusted to accommodate different box sizes, up to two pneumatic cylinders can be installed on each of the four sides of the boxes for pressing, for smaller boxes the number is reduced to one cylinder per side, a dispensing system is provided for glue application, which applies the glue to the finger joints of the boxes using assembly aids, equipment: table made of aluminum profiles, two aluminum profile rails each in longitudinal and transverse direction, adjustable to the required box size using clamping levers, up to four pneumatic diaphragm cylinders for clamping the longitudinal sides, four guided pneumatic cylinders with brackets for moving the assembly aids, up to eight pneumatic cylinders for pressing the bo ...
Renault Master rigid from 2017, equipped with a 2.3 liter diesel engine with 125 kW (170 hp) and robotized automatic transmission. Odometer reading at recording: 120,924 km. Well equipped with cameras including front, rear, left and right with in-cab monitor, navigation, air conditioning, auxiliary reversing lights, rear semi-air suspension with separate left and right control, power windows, central locking, radio/multimedia and TomTom navigation. Equipped with a closed body with internal dimensions of approximately 4,230 × 1,900 × 2,080 mm. Payload approximately 914 kg. According to the available information, the robot gearbox, clutch and particulate filter have been renewed. Car-Pass and vehicle documents available. Inspection valid until 10/02/2027. Vehicle is in neat used condition. Vehicle starts, drives and brakes properly. Auction-ID: A3-46140-22145
With vertical mast and turntable for palletizing. Electronic control panel with cycle programs P01 to P08, up/down and emergency stop settings. Used industrial equipment, aesthetic condition with signs of wear; operation to be checked. Auction-ID: A1-51273-46
EXTEND EXS-303 semi-automatic strapping machine, year 2019. For efficient strapping of cartons, parcels and similar packaged goods. The strap is guided manually; tensioning, sealing and cutting are automatic. Supply 110 V / 220–240 V, 1 phase, 0.2 kW, 0.9 A, 50/60 Hz, short-circuit rating 80 A, weight 59 kg, CE compliant. Simple operation and sturdy construction. Three units in stock, immediately available.
ROBOPAC Ecoplat TP FRD semi-automatic pallet stretch wrapper, year 2011. Turntable with pallet-truck access, mechanical FRD film brake and adjustable wrapping parameters. 230 V, 50/60 Hz, single phase, 4.0 A, 0.9 kW, weight 530 kg. Solid low-maintenance steel construction, low energy consumption and CE compliant. Used, fully functional with normal signs of use. Overhauled and serviced in 2024. Inspection and test by appointment.
Semi-automatic benchtop capping machine C.M.C. S.N.C Model: CM/RE 500. 700 to 800 samples/hour. Auction-ID: A1-51318-5
Including control panel Auction-ID: A1-41281-20
This strapping table only requires the presence of an operator to bring the strap back into the clamping and welding head. This simple and productive strapping machine in a minimum of space is semi-automatic. Thus, the absence of an arch allows you to circle any type of package of any size. In addition, no changes or changes to elements are necessary, regardless of the width of PP strap used: all you need to do is adjust the fence! The TP202 uses 6 width up to 16 mm, but works best in 12 mm. How the TP 202 strapping table works: Strapping is simple, fast and reliable. The strapping machine accepts all forms of packages, even the largest because of arch to hinder your movements. – Mechanical strap tension adjustment – 0 to 45 Kg – 280° thermo-sealing for strip ligation – Manual or automated programs of the strip feed – Heating adjustment by switch – Strap widths f ...
Horizontal band saw, semi-automatic Cutting diameter 260 mm Cutting range at 90 degrees: around 260 mm Cutting range at 90 degrees: square 250 x 400 mm Cutting speed 20 - 80 m/min Control conventional Total power requirement 2.0 kW Machine weight approx. kg Dimensions LxWxH 2.0 x 1.4 x 1.2 m Condition: functional Auction-ID: A7-51438-431
• Device type: Semi-automatic rotary microtome (with hand wheel and separate control unit) • Control panel: 5-inch touchscreen with operation logs and alarms display • Panel functions: Sample forward and backward, trimming, thickness adjustment, position memory and half-knife function • Blade Holder: 2-in-1 system compatible with high or low profile blades • Cutting thickness range: 0.5 to 100 μm • Roughing range: 1 to 800 μm • Electrical coarse feed: 100 to 3000 μm/s • Sample shrinkage: 0 to 250 μm • Dimensions and weight: 490 × 430 × 315 mm with a weight of 30 kg Auction-ID: A1-51320-66
Semi-automatic screw to the seal of screw-type caps.Tick count of 0-15 PCs / ProduktabhängigAuslösung of the photo-electric cell screwing process.
Attachment: Chamber filter press used semi mobile Model: pilot plant on platform mounted Design: page Holm led Filter plate format: 400 x 400 mm Chamber number: 20 Thickness: 25 mm Filter plates: PP Filter cloths: optionally available in voting on the medium Filter surface: approx. 4.72 m m² Presses contents: approx. 56 dm m³ PCB package length: 1024 mm Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min 10° MAX 50° Plate transport: manually Pumps: optional Motor voltage: 380 V Control voltage: 230V - 24 V Optional accessories: according to customer requirements and design Condition: It is a complete semi-mobile system on platform mounted, incl. control cabinet as full drainage system. This compact drainage system is easy to transport and can be taken in a very short time in operation. Appendix: Selling without trailer You want to rent this fac ...
Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 6x opto 22 480D45-12 / 1x electromatic RA4425-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg
Semiconductor relays, switchgear, switching components -Manufacturer: opto 22 electromatic, Semiconductor relays, 7 pieces with heat sink -Type: 5x opto 22 480D45-12 / 1x Gavazzi RA4450-D08 -Price/Sale: complete -Dimensions: 300/200/H70 mm -Weight: 3.4 kg
Semiconductor relays, switchgear, switching components, semiconductor contactors, relays -Manufacturer: Crydom, Semiconductor relays -Type: ELS4850S -Number: 29 relays available -Price: per piece -Dimensions: 100/50/H130 mm -Weight: 0.5 kg/pc.
Semiconductor relays, switchgear, switching components, semiconductor contactors, relays -Manufacturer: Omron, DIN rail solid-state relays -Type: G3PJ-525B -Number: 3 relays available -Price: per piece -Dimensions: 100/20/H100 mm -Weight: 0.3 kg
Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot per lane), suitable for sticks with a width of 15 to 25 mm and a length of 60 to 100 mm, maximum possible carton size (pre-folded) 115 x 125 mm (WxL), count of 35 to 100 sticks per carton possible, capacity up to 63 sticks per minute, electrics 400V/50Hz/3.5kW, compressed air 6 bar, Siemens SIMATIC Touch Panel
-Suitable for 0.75 L and 1.5 L glass bottles -Functions: disgorging (crown cap removal), liqueur dosage addition, wine topping-up (level adjustment) -Manual operation by one operator -Stainless steel AISI 304 frame with base and vertical column -Integrated disgorging unit -Liqueur tank with compressed air inlet and pressure gauge -Bottle holder for both formats (changeable support) -Automatic three-way valve for precise dosage adjustment -Tilting device for bottle positioning during topping-up -Manual valve for controlling the levelling phase
Semi-Automatic Foil sealing machine MAF WS2-St500 Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine MAF WS2-St500 Year 1989 - Serial-No. 24 08689 Mobile on mobile frame After sealing - automatic transport into tunnel
A deposit of €300.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the veh ...
A deposit of €338.00 is required to be placed on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehicle will be ...
A deposit of €375.00 is required to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. Booklet present The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of ...
A deposit of €356.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehicle wil ...
A deposit of €338.00 is required to be placed on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehicle will be ...
A deposit of €338.00 is required to be placed on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehicle will be ...
A deposit of €225.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the ve ...
A deposit of €113.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. WITH VARIOUS FURNITURE CONTENTS The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. ...
A deposit of €413.00 is required in order to bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehicle will ...
A deposit of €188.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehi ...
A deposit of €180.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the veh ...
A deposit of €338.00 is required to be placed on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehicle will be ...
A deposit of €225.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the ve ...
A deposit of €113.00 is required in order to place a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The registration of the vehi ...
A deposit of €300.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. WITHOUT CONTENT The participant is required to provide, within the terms of the auction, the documentation necessary for the completion of the sale and the registration of the vehicle. In particular: Legal persons (companies, bodies, associations): they will have to send an updated Chamber of Commerce certificate showing the exact company name, registered office and identification data of the company. Sole proprietorships : they will have to send an updated Chamber of Commerce certificate showing the exact name of the company and the data of the owner. Natural persons : they must send a copy of the front and back of a valid identity document and tax code. The regist ...
3x protective cover, 3x different plastic plate Auction-ID: A1-50476-306
Metal square tubes in various sizes, 2x fan wheel Auction-ID: A1-50476-288
Metal feet, suction plate, mounting plate Auction-ID: A1-50476-287
Protective caps, terminal blocks, brass parts Auction-ID: A1-50476-291
Various semi-finished products: blocks, supports, strips, modules Auction-ID: A1-50476-316
maximum number of results exceeded
please refine your search
2.000 € 
