semi automatic used for sale

2 pockets Compressor High stacked feeders

• Siemens 840 C controller • Location I + III + IV + VI: Longitudinal and transverse slide • Position II + V: CNC slide and longitudinal slide Bvxhlj3gi3 • Advance position VI • Interceptor Position VI • KS system (emulsion) • Loading magazine Cucchi model Multi-6 156C15, YOC 2015, • Ruez hinge belt conveyor in the machine bed • Hinge conveyor Knoll 280 S-1/40 ID 26565 (outside) • Electrostatic separator ISI RON/A 2500A, ID 26295 • Without further accessories / tools • CUCCHI BLT Model Multi -6 YOM 2015

SEMIAUTOMATIC FILLING LINE 6 HEADS The machine is locatd in Italy.

Fully automatic circular saw with miter cut - up to 300 sawing programs - single stroke 1,000 mm, repeatable as desired - Saw blade: HSS 370 x 32 x 3 mm - Blade speed: 5 - 150 1/min - Vice opening 190 mm

saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 6160 Type: GE 42 NC Producer: INDEX Generated: Parameters: Control system: Siemens Maximum turning length: 360 mm turning diameter: 300 mm Minimum spindle speed: 31.5 1/min Maximum spindle speed: 6000 1/min Total power requirement: 35 kW Equipment: Bar loader

REF-2259 SOMME DIANA-363-VAC AUTOMATIC CAN SEAMER WITH 6 HEADS AND SOMME 21-VALVE VACUUM FILLING SYSTEM Automatic tin can seaming machine with 6 seaming heads. Fitted with a 21-valve vacuum filling unit. Manufacturer: SOMME. Model: Diana-363-VAC Output: 12-15,000 Cans/ hour Can size: Ø 73mm. Overall dimensions: length 4,200mm, width 2,000mm, height 2,200mm

REF-2260 SOMME FORTUNA-363 AUTOMATIC CAN SEAMER WITH 6 HEADS, CLINCHER AND 18-VALVE SOMME VACUUM FILLING SYSTEM Automatic can seaming machine with 6 seaming heads and clincher. Manufacturer: SOMME. Model: Fortuna-363 Fitted with a SOMME 18-valve vacuum filling unit. Can size: Ø 73mm. Output: 18,000 Cans/ hour Overall dimensions: length 5,500mm, width 1,800mm, height 2,300mm

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC

: neu : ca. 10 Wochen ab Auftrags : Türkei : 15300 € : 286.11 € : 4160x34x1,1 mm : 20-100 m/min : 320 mm : 320 mm : 610x320 mm : rund 260 mm, quadrat 225 : rund 320 mm, quadrat 320 : rund 320 mm, quadrat 320 : 740 mm : 0.12 kW : 0.37 kW : 2.2 kW : 2100 mm : 1200 mm : 1350 mm : 1150 kg : rund 320 mm, quadrat 320 blade brush control panel height adjustment by switch hydromechanical belt tension inverter material limitation shaft cooling equipment saw blade security switch gearbox adjustable graduation scale for miter cuts 1,2 meter roller conveyor hydraulic lifting of the saw frame user manualin GERMAN or ENGLISH OPTION: hydraulic top clamping € 970,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 21500 € : 402.05 € : 4800x34x1,1 mm : 20-100 m/min : 380 mm : 380 mm : 430x380 mm : 590 mm : 0.12 kW : 0.55 kW : 3 kW : 2900 mm : 950 mm : 1660 mm : 1342 kg blade brush control panel hydraulic vice optical adjustment switch hydromechanical blade tension inverter mechanic top clamping material limit shaft coolant pump saw blade security switch gearbox pressure adjustment 1,2 meter roller table user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 9300 € : 176.7 € : 2730x27x0,9 mm : 35-70 m/min : 230 mm : 230 mm : 240x230 mm : 590 mm : 0.12 kW : 0.37 kW : 1.3 kW : 1700 mm : 800 mm : 1500 mm : 530 kg blade brush control panel height adjustment switch hydromechanical blade tension inverter mechanic top clamping material length stop coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 69200 € : 1266.36 € : 9500x54x1,6 mm : 20-100 m/min : 1020 mm : 1020 mm : 1020x1020 mm : rund 675 mm, quadrat 675 : 535 mm : 0.12 kW : 2.2 kW : 7.5 kW : 4500 mm : 1700 mm : 2750 mm : 5860 kg blade brush control panel hydraulic vice hydraulic blade tension inverter linear ways height adjustment by optical sensor automatic adjustment of blade guide arm, syncrounos to vice movement senitive pressure adjustment coolant pump saw blade user manual in GERMAN or ENGLISH OPTION: hydraulic top clamping € 1.940,-- chip conveyer € 1.540,-- turn table for turning the machine for mitre cutting € 5.730,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 99500 € : 1820.85 € : 9600x54x1,6 mm : 20-100 m/min : 800 mm : 800 mm : 1300x750 mm : rund 800 mm, quadrat 770 : rund 570 mm, quadrat 570 : rund 800 mm, quadrat 770 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 5050 mm : 2200 mm : 2900 mm : 6700 kg Hydraulischer Spannstock Digitalanzeige für Winkelanzeige Hydraulische Klemmung des Sägearmes Sägearmdrehung von Hand Stufenlos einstellbare Absenkgeschwindigkeit des Sägearmes Automatische Sägerahmenanhebung nach Schnittende Sensitive Schnittdruckregulierung in Abhängigkeit der Materialbeschaffenheit Hydromechanische Bandspannung über Manometer ablesbar Mobiles Bedienpult Schräg verzahntes konisches Schwerlastgetriebe Angetriebene Späne Bürste Bandführung über Hartmetallplatten und Rollen Automatische Bandbruchsicherung Kühlmitteleinrichtung HYDRAULISCHE ANHEBUNG DES SÄGERAHMENS Bet ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 27500 € : 508.75 € : 5000x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 640x360 mm : rund 360 mm, quadrat 360 : rund 310 mm, quadrat 270 : rund 360 mm, quadrat 360 : 800 mm : 0.12 kW : 3 kW : 3000 mm : 1200 mm : 1910 mm : 1635 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (sample photo - roller table see photo - optio ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 51200 € : 936.96 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 0.37 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional a ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 78800 € : 1442.04 € : 8400x54x1,6 mm : 20-100 m/min : 650 mm : 600 mm : 1000x600 mm : rund 650 mm, quadrat 600 : rund 440 mm, quadrat 440 : rund 650 mm, quadrat 600 : 880 mm : 0.12 kW : 0.37 kW : 7.5 kW : 4750 mm : 1970 mm : 2630 mm : 6520 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH The data for this ad was create ...

: neu : ca. 10 Wochen ab Auftrags : Türkei : 26700 € : 493.95 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 320 mm : 350x320 mm : rund 160 mm, quadrat 150 : rund 260 mm, quadrat 180 : rund 300 mm, quadrat 250 : 740 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2100 mm : 2200 mm : 1500 mm : 1660 kg blade brush NC control panel hydraulic vice hydromechanical blade tension inverter coolant pump saw blade security switch gearbox height adjustment user manual in GERMAN or ENGLISH OPTION: hydraulic blade tentioning € 1.100,-- The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 44100 € : 815.85 € : 6800x41x1,3 mm : 20-100 m/min : 560 mm : 540 mm : 820x540 mm : rund 550 mm, quadrat 540 : rund 360 mm, quadrat 360 : rund 550 mm, quadrat 540 : 880 mm : 0.12 kW : 4 kW : 3800 mm : 1750 mm : 2350 mm : 3200 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment HYDRAULIC UPLIFT OF SAWING FRAME user manual in GERMAN or ENGLISH (roller table see photo - optional available,  ...

SCM MORBIDELLI CX100 High-performance compact vertical machining center for drilling wood boards such as chipboard, lacquered board, MDF, extremely suitable for installation in smaller rooms. Safe and reliable, thanks to the upper clamping unit that provides adhesion to the lower reference, ideal for both flexible and series production. Windows operating system. CAD/CAM software for programming and designing any production processes. Automatic detection of piece dimensions and barcode scanner for greater efficiency and production speed. Specifications; Max. workpiece dimensions: 3050 mm x 900 mm x 60 mm Min. workpiece dimensions: 200 mm x 70 mm x 10 mm X and Y axis speed: 40 - 40 m/min Number of vertical drills: 12 (7+5) Number of horizontal drills along the X-axis: 4 Number of horizontal drills along the Y-axis: 2 Electrospindle milling machine: 5.5 kW - 18000 rpm ...

Pile feeder F535 – Vacustar separating head 4 buckles 1 knife Batch counter A56 delivery

- flat pile feeder - 1st station with 4 buckles - 2nd station with 4 buckles - Gate fold - Mobile cross fold station - stream delivery

Automatic band saw Manufacturing year: 1988 Automatic feed max stroke: 5400 mm Hydraulic blade tension Cut counter Variable speed: 15-120 m / min Chip conveyor Documentation

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

Automatic basket filler Manufacturer: RUFFINI ROMOLO Model: 401 Year of manufacture: 2003 Diameter: 500mm Power: 10kW

ESPERA fully automatic weight and price labellers ESPERA LABELLER labeller

1992 VZ430014 Serial No. 2003492 T45-F, PORT 1/3, K.03/14 T45-1-45/4, PORT 1/3, K.03/14 A45/1-DC, PORT 1/3, K03/14 Available: immediately Located: Germany

offer 22489 Specifications: - Cutting range at 90° approx. 320 m - flat 320 x 320 mm - Material replenishment machine - Band saw blade dimensions 5095 x 34 x 1.1 mm - Cutting speed 10 to 120 m/min - hydr. Lifting – lowering the saw frame - upper stroke limitation of the saw frame - Cutting pressure infinitely adjustable - hydr. Material clamping pole - Chip conveyor screw - Coolant device - Discharge roller conveyor 2500 mm - Drive 400 V / 4.0 kW - Space requirement approx. W 2500 x H 1950 x D 2000 mm - Weight approx. 2200 kg

Deir piece 3 cheek chuck Brand Forkardt 2x 315 mm diameter and 97 mm high 1x 200 mm diameter and 75 mm high with various attachment jaws The retail price is net.

: neu : ca. 6 Monate ab Auftragse : Türkei : 29300 € : 591.86 € : 6000x41x1,3 mm : 20-100 m/min : 560 mm : 560 mm : 570x560 mm : 590 mm : 0.12 kW : 1.1 kW : 4 kW : 500 mm : 1050 mm : 2050 mm : 2242 kg NC control double column band saw 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tension inverter linear way optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch gearbox user manual in GERMAN or ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

#4351 Horizon AFC 504 AKT Size: 490x648mm; min. 120x172mm Age: 2000 - 4 Pockets - 1 knife -Delivery

Salvagnini P4-2525 Automatic Panel Bending Machine Machine is in very good condition Bending height max: 254 mm Bending width max: 2540 mm

Cardboard strapper, Mosca, fully automatic. –used-: Price per piece ex location: only 2.950.-€ (net) Manufacturer: Mosca Type: RO-TR 500-4 Year of construction: 2006 ITEM NO.: 80902 Year of construction: 2002 Currently operated with belt type: 9055 Length approx. 94cm Trunk width: approx. 50cm Channel height: approx. 52cm Device height: approx. 1.52m Manufacturer: Mosca Type: RO-TR 500-4 Year of construction: 2006 ITEM NO.: 80901 Currently operated with belt type: 9055 Length approx. 94cm Trunk width: approx. 50cm Channel height: approx. 52cm 400V, 1.5 kW, 2.5 A SP 213 Manufacturer: Mosca Type: RO-TR 4 Year of construction: 2008 ITEM NO.: 91171 Currently operated with belt type: 9055 Length approx. 94cm Trunk width: approx. 50cm Channel height: approx. 52cm 400V, 1.5 kW, 2.5 A SP 010 Condition: good Available: as of now Location: Waldl ...

Manufacturer: Schütte Type: ADH 160 Machine No.: 225 Year of construction: 1981 Weight: 11t General / technical data: turning length: 125mm workpiece diameter: 168mm max drilling depth: 125mm Adjustable quantity: from 3.4 to 450 sec. Operating hours: 8.200h Working spindle speed: from 90 – 1120 rpm Installation area (l x w x h): approx. 4730 x 1700 x 2120mm Power Supply: 380V / 50Hz Accessories: 7 cross slides 8 longitudinal slides Tapping device 4x 2-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of lining: Röhm 0W-406 682 Clamping force 1200 da N 4x 3-jaw lining Ø160mm Type of lining: Draft chuck with clamping diameter 15 Type of feed: Röhm 1W-406 681 Clamping force 1800 da N Insert arm over lining 100mm. The workpiece is fed to the insert arm by a swivel arm and rotary gripper. Rem ...

Good condition fully functional, little used. From year of construction 2016! In stock & immediately available. Operating voltage: 230 V / 50 Hz AC Total connected load: 0.72 kW Strapping cycle: approx. 2.5 sec. Weight: approx. 230 kg Polypropylene strapping: 10 – 15.5 mm wide Height: 810 mm Floor space: Depth: 630 mm Width: 1450 mm Height: 1540 mm Sheet size: W 850 x H 800 mm Price net plus VAT

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 11900 € : 242.76 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2,2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with manual adjustable length stop with limit switch blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 59000 € : 1180 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 670x540 mm : rund 540 mm, quadrat 540 : rund 510 mm, quadrat 510 : rund 270 mm, quadrat 250 : 805 mm : 0.12 kW : 2.2 kW : 4 kW : 3100 mm : 2350 mm : 2150 mm : 3800 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 540 CGS NC (with servo instead of hyraulic feed) € 66.800,-- The data for this ad was created with ModulMWS - t ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 52200 € : 1044 € : 5400x41x1,3 mm : 20-100 m/min : 440 mm : 440 mm : 610x440 mm : rund 440 mm, quadrat 440 : rund 430 mm, quadrat 430 : rund 320 mm, quadrat 260 : 807,5 mm : 0.12 kW : 1.1 kW : 4 kW : 2850 mm : 2350 mm : 2000 mm : 3600 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.230,-- micro coolant equipment € 890,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 440 CGS NC (with servo instead of hyraulic feed) € 58.900,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 42800 € : 864.56 € : 5200x34x1,1 mm : 20-100 m/min : 360 mm : 360 mm : 610x360 mm : rund 360 mm, quadrat 360 : rund 360 mm, quadrat 360 : rund 325 mm, quadrat 265 : 735 mm : 0.12 kW : 1.5 kW : 3 kW : 2850 mm : 2250 mm : 1870 mm : 2400 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 360 CGS NC (with servo instead of hyraulic feed) € 48.300,-- The data for this ad was created with ModulMWS - ...

: neu : ca. 14 - 16 Wochen ab Auf : Türkei : 32600 € : 658.52 € : 4380x34x1,1 mm : 20-100 m/min : 325 mm : 325 mm : 400x325 mm : rund 325 mm, quadrat 325 : rund 300 mm, quadrat 265 : rund 190 mm, quadrat 190 : 655 mm : 0.12 kW : 1.1 kW : 2.2 kW : 2130 mm : 2150 mm : 1650 mm : 1860 kg NC control double column band saw on linear guidelines 3° cutting angle blade brush control panel hydraulic feeding vice hydraulic vice hydromechanical blade tensioning inverter optical height adjustment proximity switch for sensing blade slippage material limit shaft pressure adjustment coolant pump saw blade security switch user manual in GERMAN or ENGLISH OPTIONS: hydraulic top clamping € 2.120,-- micro coolant equipment € 770,-- laser cutting line € 385,-- ALTERNATIVE: model BMSO 325 CGS NC (with servo instead of hyraulic feed) € 36.900,-- The data for this ad was created with ModulMWS ...

Selectomat System Schlatter RMB EMBA 18

Labeler prepared for 3x adhesive labels with hot melt (front/back/safety tab). The labeller was overhauled in 2021 by the manufacturer Gernep, including new electrics according to CE standard. The labeller is equipped for the glass type DTO80. The labeller was in operation for about 200 hours after the overhaul.

: neu : ca. 4 Monate ab Auftragse : Türkei : 32600 € : 658.52 € : 6000x41x1,3 mm : 20-100 m/min : 540 mm : 540 mm : 750x540 mm : rund 510 mm, quadrat 450 : rund 270 mm, quadrat 250 : 695 mm : 0.12 kW : 4 kW : 3000 mm : 1300 mm : 2150 mm : 2445 kg hydraulic vice digital readout for scale of bending angle hydraulic clamping of sawing arm turning of sawing arm by hand continuously variable down speed of sawing arm automatic sawing frame lifting after cutting sensitive cutting pressure adjustment subject to material condition hydromechanic tape tension readout by manometer mobile control panel angular geared conical heavy duty gear unit driven chip brush tape guiding by hard metal sheet plates and rolls automatic tape break lock coolant equipment hydraulic uplift of sawing frame 3° inclined saw band user manual in GERMAN or ENGLISH (the vertical hydraulic clamping shown on the photos ...

: neu : ca. 4-6 Monate ab Auftrag : Türkei : 13100 € : 267.24 € : 3660x27x0,9 mm : 20-100 m/min : 320 mm : 300 mm : 320x300 mm : 640 mm : 0.12 kW : 0.37 kW : 2 kW : 1900 mm : 850 mm : 1300 mm : 770 kg Roller material feed with encoder and NC control blade brush control panel height adjustment bar with limit switch hydromechanical blade tension inverter hydraulic vice coolant pump saw blade security switch 1,2 meter roller table users manual in GERMAN or ENGLISCH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

STAHL FOLDER TF 56-44- FE -Year 1991, paper size max 56x95 cms. -High pile delivery with Tremat -Four buckles in first station with anti noise hoods -Four buckles in second station -Counter, air pump -Delivery, All rollers in nice conditions -In production, Available at the end of January

Stock number: 3740 CNC LATHE Manufacturer: MAZAK, Type: QT 350 MY Nexus Machine NO.: 184678, Year of construction: 2006 Specifications: orbit diameter 420 mm dia. Max. rot. About bed 700 mm slide. Turning length 1538 mm Main engine power 30 kw Main spindle speed range 25-3300 rpm Spindle bore 102 mm dia. C axis - main spindle movement 0.001 degrees Z Ash movement 1607 mm Y axis 150 mm Tool turret 1 with 12 stations Driven stations revolver 1 12 pieces. Motor power driven tools 7.5 Kw Accessories: Hydr. Chuck main spindle Kitagava B-32/2 - 310 mm mm dia Hydr. Lunette Length: 4300 mm, Height: 4300 mm, Width: 2600 mm, Weight: 8600 kg