semi automatic bandsaw used for sale

cutting diameter: 380 mm saw band length: 4800 x 34 x 1,1 mm cutting width: 430 mm : 380 mm Capacity 90° rectangular: 430 x 380 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 4,2 kW weight of the machine ca.: 1,34 t dimensions of the machine ca.: 2,9 x 0,95 x 1,66 m Fully automatic band saw for cutting solid material, tubes and profiles of steel, cast-iron, light and non ferrous materials, at 90°. Entirely made of steel. The rear jaw of the hydraulic vice has a number of hardened rollers that are turned by an electric motor. The front jaw consist of a number of free running rollers. Once the work piece is clamped between the rollers no further clamping is needed. The material is fed through the vice to the material stop which contains a micro-switch controlling the feed motor. A counter controls the number of cuts. Should the blade brake the machines stop auto ...

cutting diameter: 350 mm saw band length: 4160 mm cutting width: 400 mm : 350 mm : 350 x 350 mm Capacity 90° rectangular: 400 x 350 mm speed: 20 -100 m/min main drive: 2,2 kW hydraulic pump: 0,37 kW coolant pump: 0,12 kW dimensions of saw-band: 4160 x 34 x 1,1 mm work height max.: 860 mm total power requirement: 2,9 kW weight of the machine ca.: 1030 kg dimensions of the machine ca.: 2,23 x 0,88 x 1,89 m Description: • Fully automatic miter band saw for sawing thick-walled Profiles and solid materials • Motorized roll feed of the material with electrical contact stop • Delta touch screen controls • Miter cutting, up to 45 ° • 1 program with 10 steps • Length accuracy 0.5 mm The feed length of the material is manually adjustable via an Microswitches selected that • Robustly constructed monoblock saw frame with hydraulic vertical movement and linear guide • Rapid advanc ...

MACHINES PERFECT

cutting diameter: 300 mm saw band length: 3270 x 27 x 0,9 mm cutting width: 420 mm feed per cut: 800 mm band speed: 35-70 m/min quick change toolholder: 300 capacity 90 degrees: square: 240 x 240 mm Capacity 90° rectangular: 420 x 200 mm : 240 mm : 230 mm Capacity 45° rectangular: 270 x 140 mm capacity 60 degrees: round: 165 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm total power requirement: 0,9-1,5 kW weight of the machine ca.: 1090 kg dimensions of the machine ca.: 2800 2050 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Controlled spindle stop device N Electric control-box Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Speed accelerator Controlled clutching device

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment Electric control-box Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7.00 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8.00 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 730 kg Overall dimensions machine: Length: 1200 mm Width: 800 mm Height: 1400 mm Various accessories: Simple spindle stoping device Electric control-box Rocker arm with 1/1000 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.50 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Speed accelerator

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 16.00 mm Max. turning length: with flat cames: 80 mm with bell cames: 150 mm Spindle hole: 17.00 mm Max. treading diameter: 12 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 28 from: 485 rpm up to: 5450 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 1450 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1400 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 10.00 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.00 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Combined 3-spindle attachment: 13Y Controlled spindle stop device N

Milling machine DECKEL MAHO DMG 125

Consisting of: 1 Fully automatic depalletizer, Krones Palmaster 1 Fully automatic palletizer, Kettner Pressant duplex 1 Pallet magazine 1 Pallet control Pallet turning stations Pallet conveyors Protection fence Further information: Equipped for Euro-pallets. With Siemens S7 control. Year of construction: 1995 The line is currently in production. A viewing is possible. Composed of: 1 Fully automatic depalletizing, Krones Palmaster 1 Fully automatic palletizing, Kettner Pressant duplex 1 pallet magazine 1 pallet inspection Turning stations / corner converters Pallet transporters Protective fence Further information: Equipped for Euro pallets. With a Siemens S7 controller. Year of construction: 1995 The line is currently still in operation. A visit is possible by arrangement.

material dimensions max. round: ​Ø 380 mm max. square: 380 x 380 mm segment length with single stroke: 10 - 510 mm with multi stroke: max. 4590 mm dimensions LxWxH: 3100 x 2200 x 1850 mm weight: 3.100 kg

MOSCA RO-TR-P-5 Strapping Machine A fully automatic MOSCA strapping machine type RO-TR-P-5. The machine is in very good condition. The original price was about 18,500 € Technical details: Heating wedge welding system with electronic heating regulation Fully automatic belt threading Drive of the unit in DC technology with wear-free direct drives Tape End Query with Tape Jam Throw Automatic belt ring ejection in case of incorrect triggering Belt coil quick-change system Wear-free, force-controlled belt guidance Integration into any processing line possible Hinged transport systems with frequency control PLC control Control panel for setting the operating modes, switching distances, strip tension Potential-free contacts to upstream and downstream systems Automatic PP straps width 5,6,7,8,9 or 12mm Data sheet & machine map under these links

Automatic seal-cut system for closing (merging) and trimming coated tubes with 2-stage OMRON Vision Control (AI)

Kaltenbach Type RKT 760 Year of construction 1998 Saw blade diameter up to 760 mm Cutting area around 245 mm Square saw area 300 x 30 mm Drive 3/5 kw Working area profile standing 400 x 155/340 x 137/280 x 119/220 x 98 mm Working area U profile standing 380 x 102/300 x 100/220 x 80 mm Cutting speed 22/111 m / min Saw blade feed continuously 0 - 1200 mm / min 6 m inlet roller conveyor 6 m run of roller conveyor 6 m length stop Miter device

Guttridge fully automatic powder filling line Consists of Easyflo screw elevator conveyor with vibratory sieve that directly fills a 50Kg stainless auger filler, 300g - 4000g weight range, suitable for filling pouches / tubs / cans, brand new touch screen plc controls, height adjustable frame, with infeed conveyor, 1Ph

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4.0 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm Various accessories: Electric control-box Controlled clutching device

Rotary table polishing machine make Bula, model MP81 for sale. Continuously circulating machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Subject to prior sale. Optionally, the system would also be available with a polishing paste system - liquid, consisting of 1 high-pressure dosing guns WIDOBERG HDP-2, holder, timer, etc. and pressure container.

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 6 mm Max. turning length: with flat cames: 62 mm Production capacity: 0.8 - 50 pce/min Spindle hole: 9 mm Number of tool cutters: 3 Tool dimensions: Ø6 x 34 mm Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Turret slide: number of tools: 4 Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 6 mm Max. turning length: with flat cames: 62 mm Spindle hole: 9 mm Number of tool cutters: 3 Spindle speeds: Number of spindle speeds: 3 from: 2400 rpm up to: 6000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2.5 HP Machine´s weight about: 1150 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 1600 mm

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 10 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 3 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1500 mm Width: 750 mm Height: 1450 mm

Bar diameter: 0 mm Number of spindles: 0   Turning length: 0 mm CNC Brand: 0 CNC Model: 0 Control: PNC-DECO FANUC Technical data Number of axis total: 18 Number of cross slides: 6 Plain turning slide number: 5 Longitudinal carriage way: 160 mm Number back spindle: 1 Capacity round bar: 5-20 mm Workpiece length max.: 100 mm Spindle speeds: stepless up to: 6000 rpm Production capacity: 45 pce/min Voltage 50 Hz 3x: 400 Volt Spindle power: 15 kW Total power required: 43 kVA Machine´s weight about: 8500 kg Overall dimensions machine: Length: 3500 mm Width: 1600 mm Height: 1950 mm Various accessories: Bar loader number of bars: ROBOBAR Type: MSF 522/6 Coolant system Oil mist extractor: ELBARON Chip conveyor Pick-up spindle Lamp Status light Fire extinguishing system (without bottle)

Bar diameter: 0 mm Number of spindles: 0   Turning length: 0 mm CNC Brand: 0 CNC Model: 0 Control: PNC-DECO FANUC Technical data Number of axis total: 18 Number of cross slides: 6 Plain turning slide number: 5 Longitudinal carriage way: 160 mm Number back spindle: 1 Capacity round bar: 5-20 mm Workpiece length max.: 100 mm Spindle speeds: stepless up to: 6000 rpm Production capacity: 45 pce/min Voltage 50 Hz 3x: 400 Volt Spindle power: 15 kW Total power required: 43 kVA Machine´s weight about: 8500 kg Overall dimensions machine: Length: 3500 mm Width: 1600 mm Height: 1950 mm Various accessories: Bar loader number of bars: ROBOBAR Type: MSF 522/6 Coolant system Oil mist extractor: ELBARON Chip conveyor Pick-up spindle Lamp Status light Fire extinguishing system (without bottle)

Ergomat TBC 60 - Multi-slide turning center - as good as new exhibition machine - Rod passage: 60 mm - Tool holder: VDI 25 Compact multi-carriage turning center with eight CNC axes, two-channel control and backside machining. Developed for the ready-to-use production of complex turned parts. - Fanuc 31i-TB dual-channel control - 8 CNC-controlled axes - 2 vertical shaped slides and piercing slides - CNC cross slide at the front - Rear CNC cross slide with servo-driven Sauter turret and driven tools - Tapping spindle integrated in the turret - Astonishingly short cycle times - Backside processing - Coolant device - Generously dimensioned working area for unhindered chip fall - Chip collector - Year of construction: 2021 Specifications: Rod passage: - Round material: 60 mm - Hexagonal material: 52 mm - Square material: 42 mm Main drive: - max. spindle speed: ...

Product number: 2783 Type: Titaan 2-90 Serial number: HTN10220019 Year of construction: 2023 Chamber: 840 x 890 x 220 mm Seal bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/hr Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and outfeed conveyors Hellings conveyor Type: 12980-10 Serial number: 790311 Year of construction: 2021 Belt width: 600 mm Length: 3000 mm Henkelman diptank Type: 200A Serial number: H0D20220008 Year of construction: 2022 Heating: electric Usable space: 575 x 1100 mm Emersion depth: 200 mm Cycle time: 22 sec Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 7 mm Max. turning length: with flat cames: 60 mm Spindle hole: 8 mm Max. treading diameter: 6 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1400 rpm up to: 10000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 2 HP Machine´s weight about: 520 kg Overall dimensions machine: Length: 1200 mm Width: 700 mm Height: 1400 mm Various accessories: Protective cover

Bar diameter: 0 mm Turning length: 0 mm Slides: 0   CNC Brand: 0 CNC Model: 0 Technical data Diameter of work admitted: 12.5 mm Max. turning length: with flat cames: 70 mm with bell cames: 100 mm Spindle hole: 12.5 mm Max. treading diameter: 8 M (Metric) Number of tool cutters: 5 Spindle speeds: Number of spindle speeds: 20 from: 1050 rpm up to: 8000 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 4 HP Machine´s weight about: 860 kg Overall dimensions machine: Length: 1400 mm Width: 900 mm Height: 1450 mm

Chuck diameter: 0 mm Collet diameter: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Number of stations: 4 Spindle speeds: number (steps): 11 from: 500 rpm up to: 5000 rpm Machine´s weight about: 100 kg Overall dimensions machine: Length: 700 mm Width: 400 mm Height: 380 mm

LIQUIDATION of pneumatic automatic stuffing machine of the manufacturer Maquinaria cárnica Serrano SL, for collagen or natural casing. Manufacturer SERRANO, AUTOMATIC model, semi new condition. Machine for stuffing loins, headboards etc The machine can stuff products in: fibrous casing, plastic casing or collagen and natural. Machine adaptable to any type of fibers. Maximum embuchado dimension 700 mm. long. Maximum working pressure 6 bar. Fully pneumatic operation. Knee drive, fully automatic. Production of 350 cycles/hour. Built entirely in stainless steel. Easy and fast mold and funnel change system without tools. Embossing diameter 80 mm. Machine approved according to CE regulations.

High-speed labeling train from the manufacturer BIZERBA, model GLM-i. Composed of 3 labeler heads: 2 upper and 1 lower. Weighing range: up to 15kg. Printing mode: direct thermal. Print resolution: 8 dots. Print speed: maximum 300 mm/s. Label size: minimum 30mm / 30mm, up to maximum 100mm / 100mm. Core diameter: 76 mm. Label roll diameter: outer 300 mm. Labeling technology: air applicator. Interfaces: ethernet and RS232 standard. RS 485, TTY. Packet recognition: Working temperature: from 0º to +40º Electrical power 230V, 50Hz, 24A. Pneumatic pressure. 6 bar. External measurements: 3050 mm long x 1000 mm wide x 1700 mm high.

LIQUIDATION of labeling and automatic weighing train of the German manufacturer BIZERBA model GV1260.  Automatic labeling and weighing system for packaged products in the food area, cardboard boxes, large containers. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of ribbon width 650 mm long x 600 mm wide. Minimum and maximum dimensions of the package: length 100 mm-600 mm, width 50 mm-600 mm, height 20 mm-350mm. External dimensions of the machine: (mm) 2150 long x 1000 wide x 1880 high. Thermal print head - 8.0 point resolution. Weighing from 5gr to 30.000gr. Maximum labeling capacity 32 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and ...

Automatic labeling and weighing train from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Superior double labeling. Industrial equipment. Electrical power: Voltage 220 V, Frequency 50 Hz Current 2.4 A. Maximum package dimensions: 300 mm wide x 540 mm long x 240 mm high External dimensions of the machine: (mm) 3100 long x 720 wide x 1700 high. Thermal printhead - 8, 0 dot resolution Memory: 2 MB Weighing from 1gr to 6000gr. Maximum labeling capacity 60 packs/minute. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts.  High quality equipment and great performance in terms of speed and reliability.

Automatic labeller and weigher from the German manufacturer BIZERBA model GV. Automatic labeling and weighing system for packaged products in the food area. Industrial equipment. Equipment ready for PC connection, Bizerba software allows the realization and design of labels adapted to your needs. Ability to print all types of barcodes, customer logos, etc. The equipment reviewed, rebuilt and guaranteed with the following maintenance performed: change of conveyor belts, thermal print head and motor belts. High quality equipment and great performance in terms of speed and reliability. Electrical power: Voltage 220 V, Frequency 50 Hz Current 1.7 A. Dimensions of tape width 300 mm. External dimensions of the machine: (mm) 1860 long x 720 wide x 1300 high. Blower labeling compressed air feed: air pressure: 6 bar, air flow: min. 100 l/min, compressed air. oil-free ...

Automatic labeling train from the manufacturer BIZERBA, GLE model, Automatic equipment with static weighing for weight labeling and fixed prices (WITHOUT SCALE) High quality equipment and great performance in terms of speed and reliability. Allows you to label products with weight information and fixed prices. Ideal for top labeling. OUTSTANDING FEATURES   Possibility to label fixed weight-amount. Order Management Tagging totals Generic traceability on label Adapted to comply with EU regulation 1169/2011 regarding food information. Barcodes: EAN-8, EAN-13, EAN-128, CODE 128, ITF-14, GS1 Datamatrix and GS1 Databar (up to 4 codes per label). WEIGHING TYPE Static, with tape width 300 x length 430 mm. LABELLING SYSTEM TYPE OF PRINTING Direct thermal.- PRINT HEAD. Long-lasting head and resolution 8 dots/mm APPLICATION OF LABELS Applica ...

Automatic labeling train manufactured by Dibal, model LS 3130, Automatic equipment with Static weighing to label weight and fixed prices. Allows you to label products with weight information and fixed prices. Ideal for top labeling. LS-3130 SERIES MODEL WEIGHING TYPE Dynamic and static. 6 kg / 2 g with L270 x A430 mm trolley. LABELLING SYSTEM TYPE OF PRINTING Direct thermal and ribon. PRINT HEAD. 3 ́ ́ long life and resolution 8 dots / mm APPLICATION OF LABELS Pneumatic piston applicator, in upper labeller also possibility by air blowing "Air-jet ®" (AA LABEL Top label, from A30 x L35 mm, up to A80 x L100 (3") STRUCTURE – CONSTRUCTION AISI 304 stainless steel and anodized aluminum FEED. Electrical: 230 V and 50 Hz; 115 V and 60 Hz. Air: max. 150 l/min (at 5-8 bar) MACHINE MEASUREMENTS Tape height 800 x 950 adjustable legs. Maximum height 1450-1860  ...

Automatic Slicer BIZERBA. It adds value to the presentation of the products. It uses a fully automatic slicing system. Which sums up in a saving of time and efficiency. Model: A404 FB. With conveyor belt and 400mm trolley. Manufactured: Stainless steel. AISI.304 all the part that is in contact with food, such as: The trolley, the stop plate and the blade cover Cast anodized aluminum: The machine and motor box. Enameled cast iron: Drive box. It complies with the Regulations and Conditions related to hygiene in the food sector. Drive of the trolley through a motor, with automatic approximation of the genre to be cut and with a depositing system of cut gender on conveyor belt. It includes different product placement and cutting programs. Keyboard system: touch with intuitive symbols. They ensure its handling with ease. The units of the Bizerba A404FB series are built according  ...

Slicer, automatic vertical sausage slicer, from the Austrian manufacturer of the highest quality S.A.M., model 371.8 I fb. Made of stainless steel and anodized aluminum. Ideal machine for slicing and automatic placement, placing the product in different formats: stacked (block), horizontal fan stacking, vertical fan stacking and round or plate type format. It has different programs to configure, space between slices, units etc. Equipment totally rebuilt, revised and guaranteed. The S.A.M. is operated through the LCD screen by icons that are self-explanatory. It is also possible to save or reuse defined cutting parameters using a 3-digit PLU. Includes blade sharpener. FEATURES: Cart accommodating the product is 500mm long x 270mm wide. Product size: round min. 50mm max. 210mm, square max. 320x210mm. 370 mm diameter stainless steel cutting blade, cutting speed ...

Slicer, automatic vertical sausage slicer, from the German manufacturer BIZERBA, model A404. Made of stainless steel and anodized aluminum. Ideal machine for automatic slicing depositing stacked (block), or fan-shaped, has different programs to configure both the thickness of the slice, space between slices, units etc .. Equipment totally rebuilt, revised and guaranteed. The A404 is operated via the LCD screen using self-explanatory icons. It is also possible to save or reuse defined cutting parameters using a 3-digit PLU. FEATURES: Cart accommodating the product is 400mm long x 270mm wide. Product size: round min. 50mm max. 180mm, square min 50x50mm max. 240x175mm. Stainless steel cutting blade of 330 mm diameter, speed 266 rpm. Integrated motor-driven product feed trolley. Precise and consistent cut thickness (05 to 12 mm) Machine dimensions: 640 x 980 x 680mm high ...

We sell slicer, fully automatic vertical sausage cutter, of the German brand GRAEF, model VA 300. Made of stainless steel and anodized aluminum. Ideal machine for automatic slicing depositing stacked in the form of staggered. It has different ways to set working speed. Graduation of the thickness of the manual slice. Equipment completely rebuilt and overhauled by GRAEF technical service. Stainless steel cutting blade of 300 mm diameter. Product tray measurements: 420 mm long x 220 mm. Machine dimensions: 900 mm x 670 mm x 560 mm high. Cutting thickness: 0 to 10 mm infinitely variable Cutting length: 210mm Cutting height: 175 mm Cleaning and maintenance applications are developed with ease. Power 230V, 50Hz, 0.5Kw, 2.4 A . IP33 Weight: 75kg. Slicer, semi-automatic slicer, meat cutters, industrial meat cutters, industrial slicer, meat machinery, sausage machinery, food slicer. I ...

We sell slicer, vertical cutter for sausages of movement of the trolley manually and positioning of the cut product automatically, from the German manufacturer BIZERBA, model VS 11 A. Made of stainless steel and anodized aluminum. Ideal machine for semi-automatic slicing depositing stacked (block) up to 60 mm, or fan-shaped. It has different ways to configure both the thickness of the manual slice, selection of large or small piece. etc. Equipment completely rebuilt and overhauled by BIZERBA technical service. Cart accommodating the product is 250mm long x 235mm wide. Stainless steel cutting blade of 280 mm diameter. Machine measurements: 542x675x 400mm high. Cleaning and maintenance applications are developed with ease. Power 230V, 50HZ 0.575KW IP33 Slicer, semi-automatic slicer, cold cut, industrial cold cut, industrial slicer, meat machinery, sausage machinery. Its condition is ...

LIQUIDATION of automatic chopper LA MINERVA, model CE 700S, with mouth diameter of 98 mm. and with the following characteristics: Operation with an automatic feeding system by loading hopper and conical spindle feeding the cutting plates. Perfect chopping without rubbing or bruising, characteristics that, together with its great robustness, make it stand out from the rest of the machines on the market. Mouth Ø 98 mm. All the exterior of the machine and the rest of the pieces in contact with the meat, are made of stainless steel AISI-304, complying with all current legislation in this regard (EC Regulations) 7.5 HP (5.5 KW) geared motor Push-button control panel Electrical panel with triangle star start, transformer and protection elements. General power switch. Emergency stop system. Safety device by tilting protection at the outlet of the product with electrical disconnection b ...

Automatic traysealer is sold, for preformed containers. From the manufacturer Ross Industries, model S45. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 3 containers at once: 250 x 180 mm. Busch 250m3/h vacuum pump Used Ross Inpack S45 preformed tray sealing machine with: Medium to high speed modified atmosphere packaging Time, temperature and pressure are monitored and controlled to provide consistent seals Contoured filler plates for minimal gas use Unique film media design to minimize film waste Automatic tray loader 3 up configuration 13 ...

Automatic traysealer is sold, for preformed containers. Semi new used equipment. From the manufacturer ULMA, model TAURUS 300. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 2 containers at once: 250 x 180 mm. Busch vacuum pump of 100m3/h RED special for injection of OXYGEN with values greater than 20%. Automatic tray sealing machine Ulma Taurus 300 • Overall dimensions 2300 mm long x 1000 mm wide x 1750 mm high, input tape 1000 mm long. • power 7 kW; • power supply 400 V, 50 Hz; • Mold 250x180 mm x 2 containers. • film width 460 mm; ...

Make LB. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

Traysealer Ilpra model Food Pack Tank with vacuum pump Bush. As characteristics of the machine we highlight the following: automatic film collector, macula detector for printed film, new BUSCH vacuum pump of 63 m3, input feed belt for trays in automatic, Exit of the machine by dragging by chains to roller outlet, prepared to pack with protective atmosphere, with vacuum and only heat-sealed. Automatic traysealer, works at cycles of 2 trays and production capacity of 12 cycles per minute with heat sealing with vacuum and gas. The heat sealing machine performs a welding process from one thermoplastic to another thermoplastic or other compatible material, using heat and pressure.  It is used to make a protective atmosphere by extracting oxygen from inside the container and replacing it with an inert gas, or it only performs the sealing action and can also be sealed with vacuum. The machine  ...

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Labeller Manufacturer NERI Type BL 400 VTE Series No.M.BAA 137.01 Year of construction 2008 Labeller for boxes max. 400 pieces/min. Box dimensions Length 20- 180 mm x Height 15-120 mm x Width 70-200 mm 2 pages Labelling of Tamper Evident labels horizontal Label roll min. 40 mm max. 400 mm. Incorrect cardboard ejection