sed used for sale

Hydraulic tire separator press type SEDA T-REC XXL. For quick separation of tire and rim. Also ideal for alloy rims.

Vertical turning lathe SEDIN 1512 CNC CNC control- Eastern origin Table diameter: 1120 mm Max work-piece: -Diameter: 1250 mm -Height: 1000 mm -Weight: 3200 kg Table speeds range per 1 min: 5-250 Tool dimensions: 25×40 Max horizontal travel of the vertical ram: 775 mm Max vertical travel of the vertical ram: 700 mm Max horizontal travel of the horizontal ram: 630 mm Max vertical travel of the horizontal ram: 1000 mm Max turning angle of the vertical ram: 45 degree Cross rail: -Travel: 660 mm -Speed: 400 mm/min Main motor power: 30 kW Overall dimensions: 2750×2975×4100 mm Machine weight: 15700 kg

SEDIN 1516 Vertical Turret Lathe Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 19200 kg Side support

SEDIN 1516 CNC Vertical Turret Lathe CNC control- Eastern origin Turning diameter: 1600 mm Table diameter: 1400 mm Max workpiece height: 1000 mm Max table loading: 5000 kg Max horizontal ram travel: 630 mm Max horizontal carriage travel: 975 mm Max vertical ram travel: 700 mm Max vertical carriage travel: 1000 mm No of feed carriages: 16 Carriages feed range: 0,07-12,5 mm/rev Distance between table and ram: 0-1225mm Fast stroke: 2000 mm/min Main motor power: 30 kW Speeds range: 4 - 200 rpm Dimensions: 3190x3360x4100 mm Weight: 18200 kg

SEDIN 1512 vertical lathe YOM 1987 Table diameter 1120 mm Max. turning diameter 1250 mm Max. workpiece height 1000 mm Max. workpiece weight: - 3200 mm (5…80 rpm) - 1000 mm (250 rpm) Main motor power 30 kW Installed power 37 kW Dimensions L/W/H 2750/2975/4100 mm Weight 16000 kg

faceplate diameter: 2800 mm swing diameter: 3200 mm turning height: 1500 mm slide adjustment: 1200 mm turning speeds: 50 U/min Control: Sienens 840 D side head - cross travel: 900 mm power capacity: 55 kW : workpiece weight: 16 t total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The engine was rebuilt in 2008/2009 to CNC control Siemens 840 D. The right support is operated CNC and the face plate. The left side of the support and assistance are conventional. Acu Rite Digital Display The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling  ...

faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is overhauled and has a new Siemens control The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Mod ...

Used SED 30 Centrifuge Voltage: 220/240 (50/60Hz) Auction-ID: A1-50936-132

Frequency Inverter, Inverter SIEMENS SED2-11/32B 6SE6436-2BD31-1CA0 11 kW Input voltage: 3 x 380 - 480 V Output voltage: 3 x 0 - Input V matching LU58, S502, FI29, EL420 ! used, tested !' Dimensions: 250 x 245 x 185 mm

Vertical sedimentation tank made of stainless steel. Capacity: 80 hl, Additional title: Vertical stainless steel tank, Content: 8000 l, Width: 2100 mm, Height: 6000 mm, Material: Stainless steel, Position: free standing, Base construction: Cylindrical tank with dished bases, on square tube feet, Features: Manhole in the frame, central bottom outlet

• BMW 525d E60 Sedan from 2005 • 6-cylinder diesel engine • Manual transmission • Power: 130 kW / 177 hp • Displacement: 2,497 cc • Mileage according to the odometer: approx. 217,457 km • Euro 4 emission standard • Colour: Silver metallic • Vehicle starts and drives • Leather interior available • Electrically adjustable seats in the front • Sunroof available • Automatic climate control available • Parking sensors available • Interior overall well-maintained with signs of wear and tear typical of age • Driver's seat with visible signs of wear • Headlights matte/blind due to age • Minor scratches and signs of wear on the bodywork • Trunk with light dirt • Sale as a used vehicle without technical inspection • Due to age and mileage, there may be other hidden defects • No warranty on engine, transmission, electronics or other assem ...

2017 BMW 318i Sedan with 69,537 km, in impeccable overall condition. Particularly clean and neat vehicle, both inside and out, and working perfectly. Equipped with a 1.5 petrol engine with 100 kW (136 hp) combined with a 6-speed manual gearbox. Nice configuration with leather seats, heated front seats, reversing camera, GPS, cruise control and speed limiter. Sold with its Belgian documents, certificate of conformity and Car-Pass. Technical inspection valid until 04/12/2026. Vehicle in excellent condition, ready to hit the road. Auction-ID: A3-46103-36367

BMW ActiveHybrid 7 Sedan in dark grey metallic High-quality brown leather interior with wooden trim strips 4.4L V8 hybrid gasoline engine with automatic transmission Power 330 kW / 449 hp Registration date: 22.06.2010 Mileage approx. 240,000 km Euro 5 emission standard Navigation system available Soft-close doors available Electric screens available in the rear Right electrical screen defective Interior overall neat condition Signs of wear due to age and mileage present Signs of use and minor scratches on the body and bumpers present Front headlights matt or tarnished due to age Engine has made noise and urgently needs service or technical inspection Vehicle is not roadworthy No MOT available ActiveHybrid battery / Active module defective or needs to be checked Sold expressly without guarantee or warranty Any liability for material defects, guarante ...

First registration: 30/05/2022 Mileage displayed: 45,046 km Type: G5L Variant: 11AG Engine: petrol/electric plug-in hybrid Displacement: 1,998 cc Engine power: 135 kW / 184 hp Color: Grey Body: sedan, 4-door Number of places: 5 Visible equipment: digital instrument cluster, alloy wheels, front parking sensors and bodywork with sporty finishing elements. Documents: Belgian registration certificate and certificate of conformity shown in the photo. Green technical inspection of 22/04/2026, valid until 30/05/2028, without remark indicated. Mileage at inspection: 40,424 km. Plus 4 snow tyres Auction-ID: A3-46103-35372

Lack of plastic façade Auction-ID: A1-50979-221

Auction-ID: A1-51211-325

Please note that you do not have documents or a registration book, bring a trailer for loading Auction-ID: A3-46103-31046

new rear light, incorrectly ordered, from stock

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: SED 2-11/35B -Max. Power: 11 kW -Input: 380-480V +/-10% 3ØAC 26.0A 0-150 Hz -Output: 0-Input V 3Ø 26.0 A 0-150 Hz -Dimensions: 640/450/H350 mm -Weight: 24 kg

Volkswagen Jetta 1.6 Petrol Sedan – 1st owner – 165,000 km – Air conditioning – 17\" rims Offered for sale: Volkswagen Jetta 1.6 petrol, original Belgian car from the first owner. The Jetta is the sedan version of the Golf and offers a spacious boot (527 litres), comfortable driving characteristics and a timeless design. Equipped with the naturally aspirated 1.6 petrol engine (102 hp), without turbo. Vehicle data First owner Original Belgian car First registration: 11/06/2008 Mileage: 165.023 km (can go up slightly) Engine: 1.6 petrol (1,595 cc) Power: 102 hp (75 kW) Environmental standard: Euro 4 Body: Sedan/Saloon 5 seats Chassis number (VIN): WVWZZZ1KZ8M142157 Equipment Air conditioning (working) 17-inch alloy wheels Radio Power windows 1 key with remote control State The car starts, drives and shifts. The bodywork shows signs of wear according to its age, including a dent on  ...

Second-hand decanter made by FLOTTWEG, model Z53-4454. Maximum bowl speed: 3250 rpm Max. sediment removal rate: 1,3 kg/dm3 Min/max product temperature: 0/100ºC Technical features Model Z53-4/454 Year of manufacture 2003 Maximum speed 3250 rpm Maximum sediment density 1.3 g/cm³ Drum inner diameter 529 Discharge diameter 315 mm Seal material NBR Working temperature 0/100 ºC Drum motor 63 kW mm Screw motor 15 kW Equipment configuration Electrical panels Hydraulic power pack Slide gates Documentation CE Certificate Maintenance Manual Operation Manual Drawings Spare parts list Condition Inspected Made by FLOTTWEG

Uterna company ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haa ...

Used REDA FBF 4015 pasteurizer 2000 LPH - Year 2016Technical Specifications & Performance DataThe REDA RE25TE centrifugal separator is designed for milk and whey skimming, standardization and clarification in dairy processing operations. It is a second hand industrial processing machine suited to beverage production and food-processing environments where controlled separation and product quality are essential.Manufacturer: REDAModel: RE25TEMaximum skimming capacity: 2,500 L/hBowl rotation speed: 7,500 rpmMotor power: 7.5 kW three-phase electric motorNet weight: 610 kg in standard installationGearbox oil quantity: approximately 3.8 litresProduct connections: DN25 and DN40Advanced Automation & Control SystemsThe separator features an automatically closing bowl, closing when approximately 6,000 rpm is reached during start-up. Typical start-up time is 4–5 minutes. Correct rotation is essen ...

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Attachment: Lamella separator Condition: pre-owned m³/h up to 3000 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

Used Monobelt, type: NP06-AD belt press for dewatering sludge. Belt width 60 cm. The belt is made entirely of stainless steel, has a fully automated high-pressure pump and two sets of flat jet nozzles for washing the belt. It is equipped with smooth belt feed regulation and a pneumatic installation that controls the belt tension and thus the sludge crushing force. It is also equipped with an automatic belt setting controller on rollers. The press control cabinet is very extensive and controls the press itself but also additional equipment (sludge pump, mixer, dispenser). Press with equipment: - screw pump for sludge with a capacity of 6 m3 per hour with capacity regulation, - dispenser of various types of emulsifiers with capacity regulation and a mixer. The whole is a complete set for work in the agri-food industry, processing, sewage treatment plants, distilleries, bre ...

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

GEA Westfalia UCA 450-00-02 centrifugal decanter manufactured in 1998, equipped with a complete flocculant preparation and dosing system. The equipment has a product feed pump, flocculant dosing pump, flocculant concentrator pump and auger for solids discharge. Includes electrical panels, maximum speed of 3,000 rpm and capacity to work with sediments of up to 2,000 g/dm³. It comes with an operating manual, electrical diagrams and a list of spare parts. Technical characteristics Model UCA 450-00-02 Year of manufacture 1998 Maximum speed 3,000 rpm Maximum sediment density 2,000 g/dm³ Equipment Setup Electrical panels Product Feed Pump Flocculant dosing pump Flocculant concentrator pump Complete flocculant system Screw for solids discharge Documentation Operation Manual Electrical diagrams Spare parts list Product Type Sludge In your state

all stainless steel electrically heated 127 kW frying length 5.000 mm belt width 400 mm adjustable speed oil level control oil circulation pump sediment removal system electrical hoists fire protection overall dimensions (l x w x h) : ± 8.300 x 2.000x 2.700 mm outfeed conveyor teflon-infeed

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins

Coolant cleaning system Manufacturer: Cyclomat Type: CCNR 14/350 Year of Make: 2016 For cleaning the abrasive emulsion Supply with max. approx. 250 L/min. at approx. 3.5 bar water Lifting into the filter system is done on site, Air- and foam-free. Max. temperature: 50°C Cleaning capacity: 350 L/min. Recirculation from clean tank to turbidity tank: 100-350 L/min. Machine supply max.: 250 L/min. Filtration principle: ZYKLOMAT high-performance hydrocyclone Z1B-9/3 Separation grain limit: approx. 5 μm Medium: Emulsion 3-6 % Operating Temperature: Ambient Temperature Solid particles: approx. 5.14 m3 Max. operating volume: approx. 4.58 m3 Min. operating volume: approx. 3.60 m3 Procedure: Fully automatic full-flow filtration Sludge discharge: Fully automatic, with a solid consistency The dirty liquid is supplied via on-site lifting sta ...

all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW

sed Manesty Rotapress MK IIA rotary tablet press, 45 station, double sided, with pre-compression, keyed upper punches, With feed hoppers, force feeders, controls and associated parts.

Machine name: Decanter centrifuge Manufacturer: Flottweg Type: Z4E-4/454 Year of Make: 2009 Drive motor: 30 kW Worm drive (backdrive): approx. 7.5 kW Permissible Sediment density: 1.6 g/dm³ Max. drum speed: 4,200 rpm Inner diameter drum: 420 / 240 mm Drive speed: Flottweg SIMP-DRIVE drive system (frequency converter-controlled) Material: Stainless steel 1.4463 Max. operating temperature: 0 - 100 °C Dimensions: (L x W x H): approx. 3,500 x 1,000 x 1,200 mm Curb weight: approx. 3,000 kg Tech. Documentation: Yes Remark: Screw Wear Protection: Tungsten Carbide / Chilled Iron Accessories: Control cabinet Condition: Used good Price: On request

all stainless steel suitable for thermal oil heating 209 kW suitable for fire protection with top hold down belt isolated canopy infeed belt oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with manual hoists dimensions (l x w x h) : ± 8.900 x 2.000 x 4.000 mm

Following Separator for sale. Make: Alfa Laval, Made In Italy Type: FOPX 610 TFD 24 Serial Number: 4097640 Year: 1997 Product No.: 881244-03-03 Machine Top Part: 561012-01 Bowl: 554048-04 Machine Bottom Part: 540225-10 Max Speed Bowl: 5148 Speed Motor Shaft: 1800 El. Current Frequency: 60 Recommended Motor Power: 12KW Max. Density of Feed: 1100KG/M3 Max. Density of Sediment: 1350KG/M3 Max. density of Operating Liquid: 1000KG/M3 Process Temperature min/max: 0/100 OC

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

all stainless steel electrically heated 85 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control Teflon-infeed oil circulation pump filter sediment removal system hoists fire protection total length ± 6.300 mm total width ± 1.500 mm total height ± 3.310 mm

Jaguar XF 3.0 V6 Luxury Specifications: Brand: Jaguar Model: XF Type: 3.0 V6 Luxury Year of construction: 2008 Date of first admission: 22-05-2008 Mileage: 217.231 km Fuel: Petrol Displacement: 2,967 cc Number of cylinders: 6 Power: 175 kW / 235 hp Transmission: 6-speed automatic Body: sedan Number of doors: 4 Number of seats: 5 Color: green Tare weight: 1.635 kg Emission class: Euro 4 Rim size: 17 inch Number of keys: 2 Chassis number/VIN: SAJAA05M69FR17887 Features: 6-speed automatic gearbox JaguarDrive Selector with rotary knob Leather interior Electrically adjustable front seats Power windows front and rear Electrically adjustable exterior mirrors Cruise control Leather multifunction steering wheel Automatic air conditioning Navigation system Central infotainment/multimedia system On-board computer Central door locking Front and rear parking s ...

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled

6-piece sedimentation oscillator with with stopwatches and accessories New condition, never used

Skoda Superb Sedan 1.8 TSI Automatic Manufacturer: Skoda Model: Superb Vehicle type: 3T Registration date: 02.11.2010 Mileage: 114507 km Color: Black Fuel: Gasoline Displacement: 1798 cm³ Power: 118 kW / 160 hp Euro 5 Automatic transmission Vehicle class: M1 5 seats Limousine Chassis number (VIN): TMBAB73T4B9028461 Permissible total weight: 2086 kg Towing capacity braked: 1500 kg Towing capacity unbraked: 700 kg Tyres: 205/55 R16 94V Alloy rims available Navigation system / infotainment available Automatic climate control available Start-stop button / Keyless start available Multifunction steering wheel available Electric windows available Center armrest available front and rear 12V connection available in the rear Leather/fabric upholstery black Interior overall well-maintained general condition Driver's seat with slight signs  ...

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1991 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled, with loading and unloading winch

Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes

all stainless steel electrically heated 386 kW frying length 8.000 mm belt width 630 mm adjustable speed oil circulation pump suitable for fire protection sediment removal system electrical hoists overall dimensions (l x w x h) : ± 11.550 x 1.700 x 2.900 mm

Coolant system for cooling lubricant RUEZ coolant tank with integrated sludge scraper, chip conveyor • Coolant cleaning system for coolant • Includes two-piece RUEZ fin separator. • Including RUEZ safety tray in accordance with the WHG with 100% collection space • Includes clean tank & RUEZ magnetic roller filter • Year of construction 2022, unused & as good as new • RAL 7035 light grey • Superstructure for chip wagons • No belt filter, sediment system •At call • Price VB Description of coolant system: • Volume approx. 34,720l • Filling volume approx. 32,710l • Usable volume approx. 22,020l + approx. 6,017l (clean tank) • L/W/H approx. 7,341mm/2,800mm/2,000mm • Tank walls 4mm/S235JRG2 • Walk-in, split bin cover • Container pads approx. 100mm • Level detector OWE 2/C as leakage protection • Inlet/distributor with screen basket � ...