security used for sale

BOSCH Type KLD 1041 Leak Test Machine for Ampoules and Vials Leak test machine for glass containers. Linear automatic machine for the inspection of ampoules, injection cylinders/cartridges and injection bottles/vials, which checks each container at four inspection points by means of high-voltage technology. The testing principle is based on the detection of the changing impedance of a container filled with an electrically conducting liquid. The containers are examined for: hairline fissures and pinholes ; insufficient glass wall thickness/tip domes too thin ; capillary pores ; leaking fusion points, sealing points and ampoule neck tips ; absence of fill. MAIN FEATURES: It is recommended to carry out the container leaktightness test directly after sterilization or fusing. The unit is equipped with: conveyor system, infeed belt, 4 high-voltage inspection stations (1-2 check bodies and ...

Cutting length: 3200 mm Pressure stroke: 100 mm. Rear feed width: 25 - 800 mm Pressure beam mechanical 2-hand operation Light beam security Motorised back fence

Cutting length: 2300 mm Max pack height: 80 mm. Hydraulic pressure beam 2-hand operation Light beam security Motorised back fence

White Temperature Chamber Here we offer a white temperature chamber. White temperature chamber water-cooled Temperature range: from - 70°C to 180°C Temperature change rate cooling 10 K/min Temperature change rate heating 10.0 K/min Temperature deviation in time ± 0.1 to ± 0.5 K Temperature homogeneity spatially ± 0.5 to ± 2.0 K Test room dimensions: width 580 mm x depth 615 mm x height 750 mm Housing dimensions: width 895 mm x depth 2080 mm x height 1950 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 14 kW Rated current 26 A Refrigerant: R-404A R-23 Weight: approx. 450 kg Control panel has been updated to a 24 volt version Type: WT11-270/70/10 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with le ...

Espec Temperature Shock Chamber Here we offer you an Espec temperature shock chamber. Thermal shock environmental chamber (cold load: -65° to 0°C). Conventional thermal shock chambers with three zones can be quite large, since three separate chambers are used. The TSA series has only one chamber, which significantly reduces its size. Instead, it circulates cold, hot or ambient air as needed. The air-conditioned air can be pre-cooled or preheated beyond the setpoint, allowing for faster recovery of the desired state after transmission. Espec Temperature Shock Chamber Water Cooled TSA-201S SN: 153000154 Hot chamber: +60 to 200°C Cold chamber: -70 to 0°C Working temperature: 0-40°C System: Two zones or three zones test by flap switching Achievement: Test area: High temperature. Exposure range: +60 to +200°C Low temperature. Exposure range: –70 to 0°C Temperature fluctu ...

Warehouse No. 8725 Multi-blade saw Paul BK 34/800 Complete cutting system with cross-cut saw Paul GE 20, Cutting saw Paul BK 34/800, multi-blade saw BK 34/800 -Chain conveyor with lifting platform -Cross-cut saw Paul, Type 20 E, YOC 92, 14 kW -Roller conveyor -Conveyor with shortage roller -Ejection station for cuts -Roller conveyor with centering -Separation saw Paul, type BK 34/800, YOC 92, 25 kW -Transverse survey Paul Type AKA, YOC 92 -Frequent leaf saw Paul Type BK 34/800, YOC 92, 75 kW -Security channel -Sorting belt for manual sorting -Stacking system Hydraulic pump 11 kW and miscellaneous 15 kW The system is fully functional, including control cabinets, saw shafts, intermediate rings, saws and documentation. Hardwood with the following data is processed on the plant: Wood thickness: 26 mm – 42 mm Input lengths on the cross-cut saw: 2500 – 5000 mm ...

Heraeus Vötsch Here we offer you a climate test chamber. Water-cooled Housing dimensions: width 2215 x depth 1280 x height 1985 (mm) Rated voltage: 400V, +-10%, 3/N.50Hz Rated power: 12.5 kW Rated current: 19 A Temperature testing Temperature range -70°C to + 180°C Temperature deviation: +- 0.5 K temporally, +- 2 K spatially Cooling speed on average: 2 K/min Heating speed on average: 3 K/min Climatic test Temperature range +10°C to + 90°C Humidity range: 10% to 98% RH Humidity deviation: +- 1% to +- 2% RH (temporal) Temperature deviation: +- 0.3 K temporally, +- 1.0 K spatially Test room volume: 1200 liters Qualified usable space: 695 x 1190 x 750 mm, approx. 620 liters Refrigerant ND R404A Refrigerant HD R23 Water consumption: < 3 litres / 24 hours (at 40 °C and 92 % RH) Type: HC 7120/S For you as a buyer for security the following information! The fol ...

sheet width: 4000 mm plate thickness: 10 mm distance between columns: 4100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 300 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 12 t dimensions of the machine ca.: 4,94 x 3,58 x 2,22 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

sheet width: 3000 mm plate thickness: 16 mm distance between columns: 3100 mm no. of strokes: 8 Hub/min table height: 880 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 400 l cutting angle: 2,5 ° total power requirement: 37,75 kW weight of the machine ca.: 15,0 t dimensions of the machine ca.: 4,04 x 3,75 x 2,37 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

sheet width: 4000 mm plate thickness: 6 mm distance between columns: 4100 mm no. of strokes: 12 Hub/min table height: 790 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 200 l cutting angle: 1,5 ° total power requirement: 11,75 kW weight of the machine ca.: 10.2 t dimensions of the machine ca.: 5,12 x 3,5 x 1,77 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

White temperature cabinet Here we offer a white temperature cabinet. Air-cooled White temperature cabinet with S! MCON / 32 controller Test room capacity : approx. 195 litres Test room dimensions: height 750 mm, width 580 mm, depth 450 mm, External dimensions: height 1775 mm, width 870 mm, depth 1600 mm, Data for operation: Test room lighting halogen bulb 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation temporally in the middle of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K Temperature change rate Heating: 4 K/min Cooling: 4 K/min Heat compensation max. 2300 W Refrigerant: R404 A 2.5 kg Gwicht : 490kg Type: WT3 - 180/40 For you as a buyer for security the following information! The following points are  ...

sheet width: 300 mm plate thickness: 6 mm distance between columns: 3100 mm no. of strokes: 14 Hub/min table height: 790 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm lower gears: 15 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 7,0 t dimensions of the machine ca.: 4,11 x 3,48 x 1,77 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG ...

: 3,0 mm ST 40 : 2,0 mm VA : 90° Grad blade length: 130 x 130 mm table:: 600 x 460 mm work height max.: 900 mm engine output: pneumatisch weight: 170 kg range L-W-H: 630 x 660 x 1270 mm Characteristics : - Notching with a burr-free cut, without deforming the cut edges - Machine body made of high-quality gray cast iron, base frame made of sheet steel - Cutting knife made of surface-hardened tool steel - Effort-saving work thanks to the pneumatic drive - Operation by means of a foot pedal, so both hands are free for the workpiece - Large work table with integrated scales - T-slots for precise guidance of the swiveling stops - Protective cover in front of the cutting knife for high security scope of delivery - 1 set of cutting knives - 2 swiveling material stops - Plexiglass protective cover - foot pedal - angle gauge - underframe The data for this ad was created with ModulMWS - the sof ...

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1600 kN Total stroke: 300 mm Execution: 4 columns Table surface: Length: 1000 mm Width: 850 mm Return power: 119 kN Depth of throat Passage between columns: longitudinal: 645 mm Lateral: 405 mm Slide clamping surface: Width: 1000 mm depth: 850 mm Close traverse speeds: Rapid traverse: 400 mm/s Press stroke: 10 - 60 mm/s Return traverse speeds: 400 mm/s Oil quantity: 350 l Voltage 50 Hz 3x: 380 Volt Motor power: 45 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 2100 mm Width: 1200 mm Height: 3900 mm Various accessories: Security/savety device: SICK Roll-feed Useful cylinder length: 250 mm Decoiler: Manufacturer: DREHER 2380DM 400 mm Straithening device: DREHER 400 x 4 mm

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Automatic feed: number: 1 Execution: rolls Electro-pneumatic clutch Security/savety device

sheet width: 3100 mm plate thickness: 20 mm distance between columns: 3100 mm no. of strokes: 6-8 Hub/min table height: 880 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 500 l cutting angle: 2,7 ° thickness at Niro-steel: 13 mm rear stop: 200 mm/sec. total power requirement: 37 kW weight of the machine ca.: 23 t dimensions of the machine ca.: 4,15 x 2,49 x 2,6 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created w ...

cutting diameter: 380 mm saw band length: 4800 mm cutting width: 520 mm : 380 x 380 mm Capacity 90° rectangular: 520 x 380 mm : 300 mm : 300 x 300 mm Capacity 45° rectangular: 300 x 380 mm dimensions of saw-band: 4800 x 34 x 1,1 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 3,67 kW weight of the machine ca.: 1,33 t dimensions of the machine ca.: 2,85 x 0,93 x 1,66 m Product Description Beka-Mak Lineer Sledge horizontal bandsaws have been designed to give a low cost compact and rugged machines.The bow is constructed in heavy gauge steel and mounted two chromed and grinding pillars offer a strong rigid sawframe, providing a high degree of accurancy when cutting. The machines are fitted with a removable coolant tank incorporating a submerged electric coolant pump which supplies coolant to both guide assemblies. These models can cope with most types of material.B ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2X lateral implementation 9cm Refrigerant VK R 452 A Weight approx. 300 kg Type: HT 7020 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used ...

sheet width: 3000 mm plate thickness: 10 mm distance between columns: 3100 mm no. of strokes: 10 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 300 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 9,0 t dimensions of the machine ca.: 3,94 x 3,56 x 2,09 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

sheet width: 4000 mm plate thickness: 13 mm distance between columns: 4100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 19 Stück oil volume: 400 l cutting angle: 2,3 ° total power requirement: 30,75 kW weight of the machine ca.: 14,5 t dimensions of the machine ca.: 4,95 x 3,68 x 2,24 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

sheet width: 3000 mm plate thickness: 13 mm distance between columns: 3100 mm no. of strokes: 8 Hub/min table height: 805 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 15 Stück oil volume: 400 l cutting angle: 2,3 ° total power requirement: 30,75 kW weight of the machine ca.: 11,2 t dimensions of the machine ca.: 3,95 x 3,64 x 2,10 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech o ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature range -70°C to + 180°C Temperature deviation over time ±0.1 to ±0.5 K Temperature deviation ±0.5 to ±2.0 K Temperature change rate cooling 7.5 K/min Temperature change rate heating 7.5 K/min Heat compensation +20°C 3000 W Heat compensation -20°C 3000 W Test room dimensions: Width 580 mm Depth 450 mm Height 750 mm External dimensions: Width 870 mm Depth 1280 mm Height 1575 mm Observation window: Width 300 mm x height 540 mm Test room volume 190 liters Rated voltage: 3/N/PE AC, 400 V ±10 %, 50Hz Rated power: 10.5 kW Rated current: 22 A Fuse, on site: 32 A sluggish Sound level at a distance of 1m (free field measurement) < 69dB (A) lateral feedthrough 50 cm / 125 cm Cabinet is water-cooled Refri ...

sheet width: 2000 mm plate thickness: 10 mm distance between columns: 2100 mm no. of strokes: 10 Hub/min table height: 820 mm back stop - adjustable: 1000 mm/mn column arm: 50 mm down holder: 10 Stück oil volume: 200 l cutting angle: 1,8 ° total power requirement: 22,75 kW weight of the machine ca.: 7,8 t dimensions of the machine ca.: 3,2 x 3,45 x 2,03 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oH ...

sheet width: 200 mm plate thickness: 6 mm distance between columns: 2100 mm no. of strokes: 16 Hub/min table height: 760 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm down holder: 10 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 3,1 x 3,43 x 1,65 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG. ...

sheet width: 2500 mm plate thickness: 6 mm distance between columns: 2600 mm no. of strokes: 16 Hub/min table height: 760 mm back stop - adjustable: 1000 mm/mn cutting angle: 1,5 ° column arm: 50 mm lower gears: 13 Stück oil volume: 200 l total power requirement: 11,75 kW weight of the machine ca.: 5,7 t dimensions of the machine ca.: 3,6 x 3,43x 1,8 m Robust design & powerful body for perfect cutting Hardened and ground blades for long life and precise Proved and rigid design with swing beam top table Minimum deformation and optimum cutting quality with best cutting angle CE standards security The combination of economic and perfect cutting performance CNC controlled gap adjustment User friendly CNC touch screen control unit Sheet support arms Ball transfer tables and T-slot The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Test Cabinet Water Cooled Temperature deviation over time ± 1 K Temperature deviation spatially ± 2 K Housing dimensions: Width 820 mm Depth 840 mm Height 1670 mm Interior: Width 550 mm Depth 350 mm Height 550 mm Rated voltage: 230V +6/-10% 1/N 50Hz Rated power: 3.2 kW Rated current: 14.5 A Temperature range -70°C to + 180°C 2 x lateral implementation 9cm Weight approx. 260 kg Refrigerant: R404A and R23 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful verification, the chambers are subjected to  ...

cutting diameter: 270 mm saw band length: 3160 x 27 x 0,9 mm cutting width: 350 mm Capacity 90° rectangular: 350 x 230 mm : 210 mm Capacity 45° rectangular: 270 x 200 mm : 170 x 170 mm capacity 60 degrees: round: 150 mm capacity 60 degrees: flat: 150 x 100 mm capacity 60 degrees: square: 100 x 100 mm speeds steplessly adjustable: 20 - 100 m/min total power requirement: 2,0 kW weight of the machine ca.: 476 kg dimensions of the machine ca.: 1,73 x 0,77 x 1,46 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellent price-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (not BMSY 270 DGH ) • Hydraulic clamping of the horizontal vise • auto ...

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 25 to Total stroke: 150 mm Execution: 4 columns Table surface: Length: 450 mm Width: 400 mm Slide diameter: 120 mm slide bore diameter: 38 mm Distance from table to slide-nose: min.: 120 mm max: 270 mm Passage between columns: longitudinal: 500 mm Lateral: 200 mm Voltage 50 Hz 3x: 380 Volt Total power required: 10.20 HP Machine´s weight about: 1750 kg Overall dimensions machine: Length: 1500 mm Width: 1100 mm Height: 2700 mm Various accessories: Security/savety device Foot pedal

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 6044 Technical data Pressure: 40 to Pressure: 400 kN Pressure: 260 bar Total stroke: 300 mm Execution: 4 columns Table surface: Length: 650 mm Width: 650 mm Min. stroke: 33 mm/s Max. stroke: 120 mm/s up: 450 mm/s Oil quantity: 300 l Voltage 50 Hz 3x: 380 Volt Motor power: 15 kW Machine´s weight about: 5200 kg Overall dimensions machine: Length: 1750 mm Width: 1200 mm Height: 3500 mm Various accessories: Security/savety device Ziehkissen pneumatisch: number (steps): 2 Force du cylindre: 30 kN Total stroke: 100 mm

Angelantoni / ACS Climate Chamber Here we offer you an Angelantoni / ACS climate chamber. Angelantoni / ACS climate chamber with humid air-cooled Test ram volume 567 liters External dimensions: width 1100 mm x depth 1705 mm x height 1910 mm Internal dimensions: width 850 mm x depth 746 mm x height 895 mm Characteristic values for temperature tests Temperature range -40°C to +180°C Maximum temperature change rate from -40°C to +180°C 3.2 K/min Maximum temperature change rate from +180°C to -40°C 2.5 K/min Heat compensation at -25°C. 1000 W Characteristic values for climate tests Temperature range: + 10°C to +95°C Humidity range: 10 % to 98 % RH Accuracy 0.25÷0.3 Rated voltage: 400 +6/-10% 50Hz 3+N+T Rated power: 11 kW Rated current: 20 A Fuse on site: 12.1 A sluggish Refrigerant: R404 A Weight: approx. 820 kg Type: CH600 For you as a buyer for security  ...

Heraeus Vötsch Temperature Test Chamber Here we offer a Heraeus Vötsch temperature test chamber. Heraeus Vötsch temperature test chamber air-cooled Basic unit type VT 7021 Operator terminal color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature selector limiter min./max. serial interface RS 232 Schuko socket potential-free contact for test material shutdown Refrigeration unit air-cooled 1 door lockable, one-hand operation Calibration of 2 temperature values Mobile version 1 bushing, NW 80 mm, right Test room volume 210 liters Temperature range -70°C to +180°C Temperature deviation over time ± 0.2 to ± 0.5 K Temperature deviation spatially ± 0.5 to ± 1.5 K Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min heat compensation 800W  ...

cutting diameter: 440 mm saw band length: 5200 x 41 x 1,3 mm cutting width: 640 mm : 440 x 440 mm Capacity 90° rectangular: 640 x 440 mm capacity 45 degrees: round: 440 mm : 400 x 400 mm Capacity 45° rectangular: 400 x 440 mm : 440 mm : 440 x 440 mm : 510 x 440 mm capacity 60 degrees: round: 250 mm capacity 60 degrees: square: 250 x 250 mm capacity 60 degrees: flat: 250 x 440 mm table height: 850 mm cutting speed: 20 - 100 m/min dimensions of saw-blade: 3,1 x 1,2 x 1,91 m total power requirement: 4,67 kW weight of the machine ca.: 1,78 t dimensions of the machine ca.: 2,85 x 1,3 x 1,8 m Product Description Capacity of the machine is 440/640 and projected for fast cuttings straight or with angle . Sensetivity of the machine lets cutting with percentage angles. BMSY 440CDGH has automatic control system and open to future developments. Rollers on the table are designed for easy movement o ...

Vötsch Emission Test Chamber Here we offer you a Vötsch emission test chamber. Vötsch Emission Test Chamber Water Cooled Test room volume 1000 liters (usable) (916) liters Adjustment container 480 liters Services for temperature tests: Temperature range +20°C to +130°C Temperature deviation temporally K ±0.1 to ±0.3 Temperature deviation spatially K ±0.5 Temperature gradient K 1 Temperature change rate: Cooling K/min 0.3 Heating K/min 0.4 Services for climate tests: Carrier gas conditioning with climate module according to the evaporation principle Temperature range +20°C to +130°C Humidity range 5 to 95% Dew point range +5°C to +60°C Moisture deviation over time % ±1 to ±3 Carrier gas exchange rate 0.1 to 1.8 chamber volume per hour Power range for desorption Desorption temperature up to max. +240°C, adjustable Test room surface temperature betwe ...

Heraeus Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Heraeus Vötsch Temperature Tester Water Cooled Designation VTS 7150-5-S Performance data: With temperature change rate of 5 K/min Test room dimensions Height 950 mm Width 1100 mm Depth 1475 mm External dimensions Height 2000 mm Width 1415 mm Depth 2566 mm Temperature range -70°C to + 180°C Temperature deviation in time ± 0.1 to ± 0.5 Temperature homogeneity spatially ± 0.5 to ± 2.0 Temperature change rate cooling 5.0 K/min Temperature change rate heating 6.0 K/min Heat compensation 5000 W Test volume: 1540 liters 2x lateral ∅ 125 cm 1x lateral ∅ 50 cm Cabinet is water-cooled Electrical connector: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 30 KW Rated current: 55.0 A Refrigerant: R 404A and R 23 Weight: approx. 1300 kg net Type: VTS 7150-5-S  ...

USED STAINLESS STEEL 10.000 LITRES TANK REF.: C4531 Vertical tank manufactured by PIERRE GUERIN in stainless steel with a capacity of 10,000 liters. Flat bottoms, with security camera and electrical resistors. General characteristics: Manufactured by PIERRE GUERIN Material Stainless steel Year built 2005 Technical characteristics: Capacity 10.000 L Bottom type Flat

Heraeus Vötsch Climate Test Chamber Here we offer you Heraeus Vötsch climate test chamber. Temperature Climate Test Chamber Air Cooled Standard: Touch panel and independent, adjustable temperature limiter 32 Bit S! MPAC control with touch panel Potential-free contact for test material shutdown Independent, adjustable temperature limiter tmin/tmax Psychrometric humidity measurement system Interface TCP/IP 1 pipe feedthrough 50 mm Refrigeration circuit air-cooled Coolant R23 & R404A Temperature range -70 to +180°C Temperature deviation over time ±0.3 to ±1.0 K Temperature homogeneity spatially ±0.5 to ±2.0 K Change speed heating 3.5 K/min Change speed cooling 2.5 K/min Services for climate tests: Humidity range 10 to 98% Test room dimensions: Width 470 mm Depth 345 mm Height 400 mm External dimensions: width 760 mm depth  ...

Hole diameter maximum: 0 mm Grinding wheel diameter: 0 mm Workpiece height maximum: 0 mm CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 805 (Hardware 80310, Software 4.1) Technical data Max. work piece diameter: ca. 20 mm Workpiece length max.: 100 mm Motor capacity: grinding spindle: 0.5 kW Voltage: 380 Volt Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1750 mm Width: 1400 mm Height: 2200 mm Various accessories: Dust extractor Automatic extruder Security-protection panel Workpiece loader Workpiece conveyor

Capacity: 0 t CNC Brand: 0 CNC Model: 0 Technical data Pressure: 4 to Execution: number of columns: 2 Machine frame: fixed Circulary table diameter: 220 mm diameter: 80 mm Number of strokes: from: 50 s/min up to: 150 s/min Adjustment of the slide: 40 mm Fixed stroke: 27 mm Tool height: 148 mm Distance between columns: front: 230 mm Voltage 50 Hz 3x: 400 Volt Power: 0.75 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1100 mm Width: 900 mm Height: 1600 mm Various accessories: Security/savety device Lamp Sound insulation cabin

used shared shop oven Wachtel Piccolo I-5 DMS 3 Master Timer from year of construction 2011 is immediately available for sale in the warehouse in Bielefeld. The furnace is tested for function and cleaned. -5 floors each 60x80cm -each floor with separate control -each floor with upper and lower heat separately adjustable -each floor has its own steam box for steam -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction 08/2011 -electrical power supply 26.9 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 237cm

-electric stone slab oven quail -Model Piccolo I-6 -Control DMS 3 m. Clock Timer K -6 floors each 60x80cm -each floor with separate control -each floor with top and bottom heat separately adjustable -each floor has its own steam box -each floor with security viewing glass door -with exhaust air hood -with proofing cabinet -Year of construction: 11 / 2011 -electrical power supply 31.1 kW -400V AC/3Ph/N/PE/50Hz Dimensions: Width: 97cm Depth approx. 134cm Height: 234cm

Control: SIEMENS SINUMERIK 3 G Technical data Distance between centres: 750 mm Centre height: 175 mm Axial motion: Longitudinal travel (Z-axis): 200 mm Cross travel (x-axis): 120 mm Max. axial speeds: Z axis (longitudinal travel): 0.0003 - 10000 mm/min Revolver grinding spindle head: Number of positions: 4 speeds: from: 45000 rpm from: 60000 rpm from: 80000 rpm Work piece spindle head: stepless from: 30 rpm up to: 750 rpm Spindle hole: 30 mm Voltage 50 Hz 3x: 400 Volt Grinding spindle motor: 4 kW Workpiece spindle motor: 2.2 kW Total power required: 17 kVA Machine´s weight about: 4300 kg Overall dimensions machine: Length: 4000 mm Width: 4000 mm Height: 2130 mm Various accessories: Wheel trueing attachment Coolant system Full splash cabin Door security attachment Internal grinding arbor Lamp Set bell collets: W 25 Quick closing attachment Macnetic chuck diameter: 230 mm Handwheel  ...

CTS Temperature Test Chamber Here we offer you a CTS temperature test chamber. Water-cooled Type series: CTS T-30/920/S Test room volume: 920 liters Test room dimensions: D x W x H 820 x 850 x 1340 mm Overall dimensions: D x W x H 1870 x 1200 x 2400 mm Temperature working range: Temperature range -30(Tested to -35) to +180°C Heating speed: 2.5 K/min Cooling speed: 2.8 K/min Electrical connection 400 V 3/N, 50 Hz Rated power: approx. 7.3kW Rated current: approx. 12.5 A Refrigerant: R404A Weight: 770 Kg Type: T-30/920/S For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant 3. After successful verification, the chambers are subjected to a test run, which is monitored with cal ...

cutting diameter: 360 mm saw band length: 4800 mm cutting width: 510 mm : 360 x 360 mm Capacity 90° rectangular: 510 x 360 mm : 360 mm : 360 x 360 mm Capacity 45° rectangular: 390 x 360 mm : 360 mm : 360 x 360 mm : 510 x 360 mm capacity 60 degrees: round: 200 mm capacity 60 degrees: square: 200 x 200 mm capacity 60 degrees: flat: 200 x 360 mm speed: 20 -100 stufenlos m/min main drive: 3,4 kW dimensions of saw-band: 4800 x 34 x 1,1 mm weight of the machine ca.: 1,45 t dimensions of the machine ca.: 2,65 x 1,2 x 1,87 m Machine description : • semi-automatic double miter for cutting profiles and Solid material in steel and non-ferrous material and excellentprice-performance ratio • robust constructed monoblock saw frame • manually swiveling saw frame with hydraulic clamping for optimal Miter (not BMSY 270 DGH ) • miter on mobile control panel digitally readable (no ...

Specifications Cutting width: 5.8 x 50 mm Year of construction: 2003 Productivity: approx. 120 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 354 mm/s the security level: 3 Power supply: 400 V/4 kW

Vötsch Temperature Test Chamber Here we offer you a Heraeus Vötsch temperature test chamber. Water-cooled Vötsch Temperature Test Chamber VTS 7027-20 Temperature range: -70°C to +180°C Temperature change rate: Temperature deviation in time ± 0.3 to ± 0.8 K Temperature deviation ± 0.5 to ± 2.0 K Change speed Cooling 20 K/min Change speed heating 20 K/min External dimensions: Width 780 x Depth 1895 Height 1900 mm Voltage: 3/N/PE AC 400V±10% 50Hz Rated power 20 kW Rated current 36 A Refrigerant R404A / R23 Climate test: Temperature range +10 to +95 Humidity range 10 to 98 % approx. 270 litres weight: 950 kg Type: VTS 7027-20 For you as a buyer for security the following information! The following points are carried out in advance at our offered chambers: 1. Functional check and replacement of necessary components 2. New filling with legally comp ...

Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Electro-pneumatic clutch Security/savety device

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Specifications Cutting width: 12mm, 9mm, 6mm, 3mm Year of construction: 1988-1989 Productivity: approx. 70 sheets (DIN A4, 70g/m²) Price: on request Cutting speed: approx. 200 mm/s the security level: P1 - P2 Power supply: 380 V/2.2 kW Machine is fully functional, after technical inspection We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

TIG welding machine make MIGATRONIC type inverter LDH 160 HMachine -No: 92040574 Year 1992Performance data: 5 - 160 Aat 160 A: 60% EDat 135 A: 100% EDOpen circuit voltage: 70VElectrode size: 1.6 - 3.25 mmWeight approx: 18 kgCurrent connection: 380 V / 50 HzOutside dimensions approx: 470 x 170 x 260 mmWith- stepless current reduction- solid gas stream- Continuous gas aftercurrent- 2 + 4 clock operation- Anti-adhesive automatic- static arc stabilization-Liftig- Security reset- Remote Controlused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools