section used for sale

Following Winches For Sale Mkae:SEC Type:EAMW-62-120 & EMW 120

Cutter head, milling holder, carbide cutter, indexable cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Manufacturer: Seco, Secodex face milling cutter head SK50 -Type: Secodex 220.17-0063 -Recording: SK50 -Cutter head: Ø 63 mm / 3 carbide inserts -Total dimensions: Ø 97 x 230 mm -Weight: 3.6 kg

60″ x 10g Secrest Mechanical Shear Make: Secrest Machinery Material Width: 12″-60″ Maximum Thickness: .125″ Air Clutch & Brake Motor: 10HP AC

We have a shrink tunnel for cap sleeves. Produced by Secomac. Own frame to be placed over a conveyor, easy height adjustment. Few running hours and low price. Editec AB

Secomak Shrink tunnel Serial: 6905 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Scissor lift table trolley, scissor lift table, scissor lift table, scissor lift platform, scissor lift platform, single scissor lift table, Prül assembly table, assembly table -Manufacturer: Seco, scissor lift table, rollable, type SHT35 -Load capacity: 350 kg -Platform: approx. 900 x 600 mm -Dimension retracted: height 430 mm -Dimension extended: height 1070 mm -Number: 2x lifting table available -Price per piece -Transport dimensions: 950/600/H430 mm -Own weight: 75.5 kg/pc.

Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Seco, tool changing system tool arm -Drive unit: TP type MRC-S28-1V-210 -Dimensions: 780/420 / H300 mm -Weight: 66 kg

Manufacturer: Secotherm, Year: 2000, Control: Secotronik BM, Number of chambers: 9, Fans per chamber: 1-3: five ventilators, 3-9: two ventilators, kW-Leistung pro Ventilator: 3, Gross chamber volume m³: 1524,6, Kammervolumen mit Holz : ca. 945, net m³: ca. 378, Heated by: Water, Temperature °C: 92-110, System dismantled: yes, Space required: 55x8 = 440 m2, Year :2000

Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Slitting line SECO 60″ x 0.375″ x 50,000Lb (A3791) is perfect solution for longitudinal coil metal cutting into strips with maximum metal thickness 0.375” and maximum coil width 60” Cold Rolled and Hot Rolled Steel 18-60” Strip Width 2 Speed Gear Box 200-500 FPM Thickness: .032″-.375” Complete Line with the Following Components: L-Type Entry Coil Car 40,000# Max Coil Weight Uncoiler: Coil ID: 23-30.50” Coil OD: 72” Maximum Coil Weight: 40,000# Maximum Sliding Base Hydraulic Expansion Peeler and Hold Down Roll 5 Roll Coil Breaker Entry Adjustable Edge Guides Entry Crop Shear Slitting Head: 10” Arbors 40 HP Motor Drive 2 Scrap Winders Recoiler: Coil OD: 72” Max Coil ID: 24” 150HP DC Motor 3 Arm Exit Turnstile 40,000# per Arm Motorized Turn Complete Line with Knives, Rubbers, and Spacers Controls, Hydraulics, and  ...

Sectra Microdose L30 Air Digital Mammography machine YOM: 2010 SW ver. 8.3 Tube Varex RAD-70D Housing model: MAMRAD105H Tube MFD: March 2019 Set of compression paddles Footswitches Acquisition workstation table with rad protection glass System in very good working and visual condition

Description: 20x indexable insert cutter heads / indexable insert end mills/indexable insert porcupine milling cutters + indexable inserts (new) from SECO Approx. Onsite Dimension. (l x w x h): 300 x 260 x 160 mm, weight approx.: 13 kg

Technical data Overall dimensions machine: Length: 1200 mm Width: 600 mm Height: 1800 mm

Scremac dairy separator Capacity : 5000 L/h Automatic Discharge Tools, Controls Siemens Available Immediately

Description: Metal plateau 450 x 700 mm, lift operated by foot hydraulics, max. load capacity: 200 kg, max. lifting height: 750 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,400 mm, weight approx.: 90 kg

Description: Metal platform 450 x 700 mm, lift operated by foot hydraulics, max. load capacity: 200 kg, max. lift height: 750 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,400 mm, weight approx.: 90 kg

Description: Metal platform 450 x 700 mm, lift can be operated hydraulically by foot, max. load capacity: 200 kg, max. lift height: 750 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,400 mm, weight approx.: 90 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 130 mm -Number of teeth: 10 -Inserts: hard metal -Adjustment: SK50 -Weight: 10 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 200 mm -Number of teeth: 12 -Inserts: hard metal -Adjustment: SK50 -Weight: 18 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 125 mm -Number of teeth: 12 -Inserts: hard metal -Adjustment: SK50 -Weight: 8 kg

Stick electrodes 4.0 x 550 -Type: FOX CM 2 Kb -Analysis: AWS A5.1 -Price: per package -Number: 40 packages available -Weight per package: 5.6 kg

Cutter head, milling adapter, carbide milling cutter, indexable insert milling cutter -Diameter: 170 mm -Number of teeth: 7 -Inserts: hard metal -Adjustment: SK50 -Dimensions: 170/170/H260 mm -Weight: 12 kg

Drying kiln of capacity of cu.m 80 INTERNAL DIMENSIONS 9000 x 7000 x h net 4100 mm nr. 6 Fans INVERTER for ventilation control Nominal range of each fan 30.000 m3/h Water heating fluid 90° C – At12 Humidification system by Nozzles at high nebulizing power Expelling Chimneys Control at 6 wood Probes Deflectors for air canalization

Description: Metal plateau 450 x 700 mm, lift can be operated hydraulically by foot, max. load capacity: 200 kg, max. lift height: 750 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,400 mm, weight approx.: 90 kg

Description: Metal platform 450 x 700 mm, lift operated by foot hydraulics, max. load capacity: 200 kg, max. lift height: 750 mm Approx. Onsite Dimension. (l x w x h): 1,000 x 600 x 1,400 mm, weight approx.: 90 kg

Description: Serial number: 1904137057, load capacity: 250 kg, hydraulic foot operation Approx. Onsite Dimension. (l x w x h): 900 x 600 x 1,100 mm, weight approx.: 40 kg

Field of work: cube mm. 600 600 600 Complete with rotating daisy A N. 7 Pallets + 1 Pallet loading / unloading place Electro spindle 27,000 rpm - HSK A / 50 + N.1 connection Spare electrospindle Tool magazine with 260 positions - complete with N. 250 spindle HSK A / 50 with identification Balluf pads

Description: 7 pieces, various sizes, see photos Approx. Onsite Dimension. (l x w x h): 400 x 350 x 350 mm, weight approx.: 25 kg

Description: 2 pieces: 1 x HTF 100 L Serial number: 1724898 Table: 1200 x 800 mm Load capacity: 1000 kg 1 x SHT 35 Table: 950 x 600 mm Load capacity: 350 kg Approx. Onsite Dimension. (l x w x h): 1,400 x 1,400 x 1,100 mm, weight approx.: 350 kg

REF-1898 SECTOR MATIC AUTOMATIC MEAT SLICER Automatic meat fillet slicing machine. Manufacturer: C.R.M. Costruzioni Revisioni Meccaniche S.r.l. Model: Sector Matic 300. Power: 5.5kW. 400 V. Machine number: 220. Year: 06/1999. Dimensions: 2,500mm length, 450mm belt width, overall width 1,100mm, height 1,500mm.

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Pullmax section bender Type: hydraulic Dia of die mandrel: 110 mm Length : 1800 mm Depth: 1300 mm Height: 1800 mm Weight: 3,7 ton

Tauring section bender Dia rolls: 220 mm Dia of die mandrel: 60 mm Length : 1400 mm Depth: 1100 mm Height: 1500 mm Weight: 2 ton

Nominal diameter 40 mm, angle valve , 24 V , 2.5 W

Schulz roller curve conveyor left with straight section 30°-450-390 IR795+920-450-390 RA1208 Roller curve: Angle: 30° left Useful width (NUB): 390 mm Nominal/outer width (NB): 450 mm Inner radius (IR): 795 mm Straight section: Conveyor length (FL): 920 mm Effective width (NUB): 390 mm Nominal/outer width (NB): 450 mm Rollers: galvanized Pitch: 75 mm Drive: Round belt continuous curve + straight section Scope of delivery: including side guide on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: nominal voltage: 400 Running direction: LEFT Antrieb: SEW Getriebemotor Drive type: Round belt condition: very good (used) Nominal / inner radius in mm: 795 Nominal / outside w ...

Security window, security enclosure -for: machine tools, grinding machines, machining centers -Frame: made of stainless steel -Dimensions: 798 x 459 mm -Glass thickness: 17mm -Number: 14 discs available -Price: per piece -Weight: 8 kg/piece

Security window, security enclosure -for machine tools, grinding machines, machining centers -rame: made of stainless steel -Dimensions: 387 x 438 mm -Frame: 475 x 425 mm -Glass thickness: 20 mm -Number: 8 discs available -Price: per piece -Weight: 6 kg/piece

Hollow section fastener, hollow section fastening, for steel construction, 10 pieces BOXBOLT® BQ1Z12 Clamping range: 5 - 25 mm drilling diameter: Ø 20 mm screw: M12 x 1,75 Screw length: 55 mm Width across flats: 17 / 26 mm Material: Steel, galvanized New Dimensions ( single fastener ): 65 x 30 x 26 mm

Schulz roller curve conveyor left with straight section 90°-450-390 IR1400+250-450-390 RA1186 Roller curve: Manufacturer: Schulz Angle: 90° Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm Inner radius (IR): 1400 mm Speed: v = 0.35 m/s Straight section: Conveying length (FL): 250 mm Useful width (NUB): 390 mm Nominal/outer width (NB):: 450 mm incl. side guides on both sides Castors: plain bearings with conical plastic molded part Transport dimensions: L x W x H = 1900 x 450 x 400 Transport weight: 100 kg Scope of delivery: incl. side guides on both sides without supports (please enquire if required) Supports optionally available: 2 double supports height-adjustable OK roller +/-100 mm Frequency converter for stepless speed change Price plus VAT ex central warehouse Dr. Sonntag KG 97076 Würzburg Features: Running direction: LEFT Antrieb: SEW Getriebemotor nominal  ...

Tool steel, round material, shaft section Shaft, steel block, shaft sawn Material section 400 mm x length 165 mm Net weight: approx. 160 kg Material number: 1.2842 Material abbreviation: 90MnCrV8 Cold-work tool steel with high hardness acceptance and good dimensional stability during hardening Application in toolmaking for cutting, punching and embossing tools. Rollers and profile rollers, measuring tools, guide rails, paper cutting knives. Delivery condition: Annealed to max. 229 HB Tensile strength in delivery condition: 770 N/mm2 Hardness: 790?820 C Tempering: 220?260 C Working hardness: 58-62 HRC Soft annealing: 680-720C - Medium alloy cold work steel - Oil hardener 4 pieces available, price indication per piece; used

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

Thenbsp;Ras ductseamer 22.82 produces longitudinal seams along the edges of square or rectangular cross-section ducts. This duct seaming machine has 15 roller shafts which are equipped with seaming rollers, and nine further intermediate rollers are located in an overhead seaming bar. The RAS 22.82 is a very simple and reliable machine that can be easily operated by one person. max thickness: 1,25 mm

Thin section creel NEVA type Orbit Plus TR 88 • Cutting height (mm): 250

Secomak Shrink tunnel 2010, Stainless shrink tunnel, adjustable temp controls, max product 160mm w x 360mm h, 3Ph

Peddimat machining center for section steel Manufacturer: Peddinghaus Type: LC 1250 / TDK 1000/9F Year of construction: 1993 System consisting of: Longitudinal saw, drilling rig and marking system Long-cut saw Manufacturer: Peddinghaus Type: Peddimat LC 1250 Year of construction: 1993 Control panel Saw blade: Ø 1250 mm, Z = 5 Motorized mitre adjustment Hydr. Locking mechanism for mitre swivel in the range of 45 / 45° Kneeling Inlet and straightening device Interface for automatic saw blade feed and automatic miter adjustment Drilling rig Type: Peddimat TDK 1000/9F Vertical drilling unit with 3 spindles each incl. internal coolant supply Hole diameter max: 40 mm Peddimat roller feed system incl. measuring discs on the inlet and outlet sides automatic hold-down device each on the feed and discharge side automatic "Z" tower adjustment by DS servo  ...

Time relay ZPA TRUTNOV TX101-PA S41657 0.8 - 8 sec Operating voltage: 24 V DC CSN 35 3403 New ! Dimensions: 105 x 70 x 135 mm

Time relay ZPA TRUTNOV TT100-PA S41120 0.8 - 32 sec Operating voltage: 24 V DC CSN 35 3401 New ! Dimensions: 105 x 70 x 135 mm