section used for sale

properties Used belt conveyor from the manufacturer Schulz Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional 1 pcs. in stock specifications: Dimensions of the belt conveyor Total length: 7.480mm Total width incl. motor: 640mm Total width without motor: 420mm Steel frame Frame Height: 50mm Side guide: 30mm high Color: Orange/Stainless Steel Belt must be glued on site Information about the belt Belt width: 400mm Strap Type: Smooth Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front ...

properties: Used belt conveyor Color: light gray SEW gear motor available Feet to order separately Material: Steel Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Price per pcs. specifications: Dimensions of the belt conveyor Manufacturer: Van der Lande Year of construction: 2008 Total length: 1,200 mm Total width incl. motor: : 660 mm Total width without motor: : 500 mm Belt width: 400 mm Strap type: lentsrillen/ black Frame height: 170 mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of ...

Producent: Treif Type: Argon built 2009 FRAME KNIFE D = 32 mm  The cube and strip cutter TWISTER basic is ideal for those who are looking for a profitable solution for perfect cutting quality in the medium performance class. The machine achieves an output of up to 2,000 kg in one hour, even with continuous use. Since the cutting chamber is generously dimensioned with 550 x 120 x 120 mm (L x W x H), a high filling quantity is always ensured. Product temperature in the range from 0 to - 4 C (depending on the product). Specifications:  maximum number of cuts / minute: 300  mechanical capacity: up to 2000 kg / h - with a net (for a 40x40 mm cube)  Length of loading chamber: 550 mm  Load compartment cross-section: 96 x 96 mm  Cutting thickness: 1 - 50 mm  Machine dimensions: (L x W x H) 1740 x 1480 x 1200 mm  manual loading method  Weight: 415 kg  ...

properties: Used telescopic belt conveyor Condition: fully functional with traces of use Ideal for fast material transport Expertly dismantled and packed Incl. feet Incl. control cabinet 4 pieces in stock Price per piece specifications: Manufacturer: Van der Lande Year of construction: 2013 Model: TTB-800- 4x16 Total length retracted: 5,550 mm Total length extended: 16.000mm Total width: 1.500mm (incl. control cabinet) Width: 1.220mm Belt width: 800mm Condition: good (used) Strap Type: Smooth / Black Conveying height: 1.100mm Net weight: 2.200mm Incl. rear counterweights. Two speed levels adjustable. Telescopic belt conveyors The telescopic belt conveyor is ideal in the picking zone to interlink machines or workstations and to optimize the internal process. During transport, the telescopic belt conveyor can convey sensitive containers, ...

Duplo Docucutter DC 615 Multifinisher Year of construction: 2012 Meter reading: 245' Incl. dongle, user manual, etc. -> free truck loading! see pictures Technical data DocuCutter Duplo DC-615: Longitudinal and cross-section and grooves in one operation min. open format: 210 x 210 mm open format: 320 x 460 mm min. final format: 48 x 85 mm final format: 320 x 460 mm Number of knives: 6 incisions / arches: 6 cuts / sheets: 15 creases / sheets: 10 Double sheet inspection Barcode Reader automatic offset correction Suction air feeder Attachment capacity: 100 mm Grammage: 110 - 300 g/m² Speed: 9 sheets/minute (A4, 2 cuts, 1 groove) Digital programming with program memory up to 80 jobs can be stored 230 volts / 0.7 A Weight: 132 kg Dimensions (approx.): 160 x 63.5 x 106 cm Cutting and creasing in one operation! Fully automatic multifinisher with job memory, easy t ...

215 MW Toshiba Inlet Steam Turbine & Generator (Unused and well maintained) New in 2008, this Power Plant has never been used and is available for immediate inspection and delivery. Never having been used, the Plant has no wear whatsoever. The Steam Turbine: Extraction & condensing, Inlet pressure: 104 bar, Output: 215MW Extractions: MP2: 22 bar, MPI: 10 bar, LP: 4.5 bar, Feed Water: 0.4 bar Minimum load: • No extractions, Only bleeds, Steam flow: 45 kg/s Maximum load: Steam flow: 270 kg/s The turbine is a Single Flow Extraction Condensing type. Steam initially enters the steam inlet flange near the end of the high pressure section and flows through the turbine stages toward the generator end of the unit. After passing through the turbine stages, the steam is exhausted to condenser. The exhaust hood is keyed to the foundation plates at a point near its center  ...

For sale is a used parcel sorter. The Sorter solution consists of a high speed processing system capable of the following: • Ergonomically designed manual induction prep section for 2-operators that will allow Efficient processing: • 5,000 pieces per hour (pph) in barcode reading mode with a single operator. This mode does not require orientation of the product and will be used for the reject processing of parcels back into the Parcel Manager- (extreme pieces must be oriented). • 5000 pph for labeling and OCR mode with two operators. This mode requires the operator to orient and bring the product to the edge. • Automated product gapping with minimal skewing • In-motion weighing and dimensioning Jcg2w8n • Top read, full piece image, omni-directional camera solution with complimentary dual barcode reading and OCR address reading software • High speed linerles ...

faceplate diameter:8000 mm swing diameter:10000 mm turning height:4500 mm workpiece weight:120/200 t table speeds:0.2-16 U/min (2 Stufen) max. torque on the faceplate:200/460 k.Nm slide stroke:vertikal: 2300 mm slide stroke:horizontal: 5300 mm cross section of ram:300x300 mm Max. cutting force of tool head :links: 63 kN / rechts: 80 kN Cross rail travel :2000 mm rapid feed cross beam:300 mm/min feed stepless:X-Achse: 1-500 mm/min main drive:110 kW weight of the machine ca.:270 t Machine size (LxWxH):14000x10000x9000 mm control:Siemens 828D/Siemens 840D worktool support (A-axis):2 Stück :1 Stück Rams:1 Stück konventioneller und 1 Stück CNC-Stößel CE-design:inkl. Zertifikat European electric:Schneider, Siemens, ABB oder ähnlich Servo motors:von Siemens SPS machine control:von Siemens CNC controls from:Siemens/Fanuc/Fagor for more information please check attached pdf file on the ri ...

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X And Z-Axes ...

Specifications Shredder Cutting width: 5.8 x 40 mm Year of construction: 1992 Power supply: 400 V / 7.5 kW the safety level P4 DIN 66399-1 F2 DIN 66399-1 pts. 5.2 Baler Maximum pressure: 9 tons Year of construction: 1992 Pressing force: 36 tons/m² Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power supply: 400 V/ 3.5 kW Bale binding: manual

SPECIFICATIONS: Hydraulic carpentry board pressing system for the production of coffins (oak, poplar, fir and other types of wood) Dimensions of the press mm: 2100 x 1600 with 9 pistons Stroke mm: 150 Complete with: - Automatic loading - 4 pressing units - Automatic unloading - 1 saw for the cross-section max. stroke mm 2800 - 1 manually adjustable device for forming floors and coffin covers - Electrical control box Electric hot and cold operation

Manual crimping tool hydraulic operation, swappabble, different sized heads. Heads: 6 set Manufacturer: DUBUIS Outillages Machine type: C130L Pressing force: 130kN Max opening width: 38 mm Max cross section: 400 mm² Overall size: 580 x 70 x 160 mm

Technical data (subject to change): Machine: Constant workpiece output from the chain path: 38 mm (incl. edge at edge thicknesses 0.3 - 3 mm) min. throughput width: 65 mm with a maximum workpiece thickness of 25 mm min. workpiece length in feed direction: 150 mm Basic height (upper edge chain track): 960 mm Workpiece: min. workpiece length: 150 mm min. workpiece width: 65 mm min. workpiece thickness: 8 mm workpiece thickness: 40 mm (with copy function) workpiece thickness: 60 mm (without copy function) Smallest workpiece: 150 mm x 150 mm, or 65 mm x 300 mm Lateral protruding coating material: 0 mm Edge material: paper, plastic and veneer min. height: 14 mm height: 65 mm Roll material: min. thickness 0.3 mm thickness 3.0 mm Veneer edges limited possible up to 1.0 mm cross-section 130 mm² min edge length 160 mm upper edge protrusion: 5 mm Equipment: - Drive fo ...

60″ x .135″ x 20,000Lb Dahlstrom CTL Line Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls

32mm x 2mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2002 Tube Diameter 10mm – 32mm Wall Thickness: 0.7mm – 2mm Speed: 180 mpm Direction: R-L Coil Weight: 3 ton Entry Coil Car Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 50Kw Motor & Drive Finn Passes with 35Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 50Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

Valonkone Debarking Machine VK450 Year of construction: 1987 ( current photos coming soon - only sample photo ! ) Debarking diameter (mm) 80 - 480 Min. trunk length (m) 2,2 Weight (kg) 13.500 Motor: Rotor (kW) 55 Engine: Feed unit (kW) 3x11 Refurbished / workshop tested Valonkone debarking machine: The renovation process essentially includes: - Mending the sheets, replacing recesses - Check rotor bearings, check knife axes and partially repair them. - Order bearings and wear parts (cardan shafts). - Repairing tables and attaching new plates to the edge strips, in some cases new conveyor chains. - New straps - Check and repair geared motors. - New control cabinet - Partial sandblasting or rust removal and re-priming The VK450 debarker was the first of the "new generation" of VK debarkers, followed by the VK600 and VK800 models. It quickly became the most sought- ...

42mm W/E HF Tube Mill Make: Won Engineering (Korea) Year New: 2008 Diameter: 10mm – 42.7mm Square Sizes: 12mm x 12mm – 18mm x 18mm Pipe Length: 5m – 8m Line Speed: 120 meters per minute Dual Mandrel Uncoiler Cage Type Accumulator Forming Mill with 100Kw DC Drive 150Kw High Frequency Welder Cooling Section Sizing Mill with 100Kw DC Drive Flying Cut-Off Saw with 7.5Kw Motor Run Out Table Dumping Table Electrics, Hydraulics, Controls, Lots of Tooling

1/ Straightener RSTM-SU-W 60/7/700 NIR Built in 1999, producer. PBK Automation GmbH Vöhringen, DE Direction of work - from left to right Passage width - 720 mm Belt width from 50-700 mm Strip thickness from 0.4-3.0 mm Strip cross-section max. 1750 mm2 Feed roller diameter - 80 mm Straightening and correction roll diameter. 60 mm Feed speed - max. 30 m/ min Feed rollers - 2 Straightening rollers 7 Correction roller - 1 Drive power 3 kW Colour RAL 6011 - lime green - Upper straightening head half can be folded up pneumatically in a V-shape for cleaning purposes - Infeed of the upper feed roller is also pneumatic - Adjustment of the straightening block is done via socket wrench Drive - via three-phase geared motor with frequency converter - Single-axis positioning control incremental CPS 20 Freely programmable CNC positioning control - Simodrive 611 Tech ...

Technical data of the used PAMA Speedram 2 boring machine: Spindle diameter: 150 mm Spindle taper: ISO 50 Milling spindle diameter: 254 mm RAM section: 360x400 mm Axes travels: Vertical travel (Y): 3200 mm Column travel (X): 10.200 mm Boring spindle travel (Z): 700 mm Axial stroke of the spindle tube (W): 800 mm Total axes travel (Z+W): 1500 mm Spindle speed: 1600 rpm Feeds rate: Working feeds: 1 + 6000 mm/min Rapid feed (X-Y-Z-W): 10.000 mm/min Power: Spindle motor: 65/40 kW Axis motors (X-Y): 65 Nm/each Axis motors (Z-W): 38 Nm Total power: 105 kW Rotary table: Dimensions: 2000 x 2000 mm Longitudinal travel: 1750 mm Table rotation feeds: 0,001 rpm Rotation feed: 1-1.5 rpm Motor power: 10 hP Max weight on table: 15.000 kg

50mm x 4mm Oto Mills HF Tube Mill Make: Oto Mills Year New: 2003 Tube Diameter, 12.7mm – 51mm Wall Thickness: 0.8mm – 4mm Speed: 160 mpm Direction: L-R Coil Weight: 5 ton Entry Coil Car Double Mandrel Uncoiler Automatic End Joiner Vertical Accumulator Coil Straightener Forming Mill with 70Kw Motor & Drive Finn Passes with 45Kw Motor and Drive 300Kw Thermatool HF Welder Cooling Section Sizing Mill with 70Kw Motor & Drive Turk Head Stands Flying Cut-Off Saw Run Out Conveyor and End Table Tooling for Round and Profiles Electrics, Hydraulics, Controls

63mm x 2mm AEF / Thermatool ERW Tube Mill Make: AEF (American Electric Fusion) Tube Diameter: 15mm – 63.5mm Material Thickness: 0.5mm – 2mm Tube Length: 6 meters Double Mandrel Uncoiler Entry Shear & End Welder TIG Power Supply Vertical Accumulator Make: Kent Driven Entry and Exit Pinch Rolls Strip Guiding Unit Forming Mill Individual Gear Boxes Universal 50HP DC Motor Six (6) Forming Stand Five (5) Side Stands Welding Section Make: Thermatool Type: Vacuum ERW Design Power: 200Kw Mechanical Welding Head Beat Removing Head with Winder Cooling Tank & Pump

63mm x 3mm Oto Mills HF Tube Mill Make: Oto Mills, Model: 552, Tube Diameter: 10mm – 63.5mm, Material Thickness: 0.8mm – 3.2mm, Line Direction: Left to Right. 10,000Lb Double End Uncoiler & Coil Car, Automatic Coil Joiner, Vertical Accumulator, Coil Straightener, Forming, Fins, Sizing Sections, 70mm Shaft Diameter, Three (3) 100HP Motors and Drives, Coolant Section, 30Kw Thermatool HF Welder, Three (3) Turk Heads, Spare Rafted Stands, Run Out and End Tables, Tooling

We offer a new, universal element slab formwork system EVODECK 205m², directly from the factory at great conditions, special net price 60.312,00€ Covered with polypropylene plastic plate! The system can be operated completely from below. Drop heads allow for early stripping, emergency support is retained and the elements can be used for the next construction section. 100 Element EVODECK 150x120 cm with PP formwork plate 8 Element EVODECK 150x75 cm with PP formwork board 8 Element EVODECK 120x75 cm with PP formwork board 60 Drop head EVODECK 90 Fixed column head EVODECK 50 Cover profile ALU EVODECK 150 cm 7 Cover profile ALU EVODECK 75 cm 3 mounting rod height adjustable 210 - 350 cm 10 UNI 150 beams for levelling/beam 10 UNI 120 beams for UNI 120 levelling/beam 6 transport set elements 150x120 cm for 18 elements Technical details, assembly instructions and discou ...

76mm x 6mm Oto Mills HF Tube Mill Year New: 2005, Tube Diameter, 12mm – 76mm, Wall Thickness: 1mm – 6mm, Speed: 140 mpm , Direction: L-R, Coil Weight: 10 ton. Entry Coil Car, Double Mandrel Uncoiler, Automatic End Joiner, Vertical Accumulator, Coil Straightener, Forming Mill with 110Kw Motor & Drive, Finn Passes with 70Kw Motor and Drive, 300Kw Thermatool HF Welder, Cooling Section, Sizing Mill with 110Kw Motor & Drive, Turk Head Stands, Flying Cut-Off Saw, Run Out Conveyor and End Table, Tooling for Round and Profiles, Electrics, Hydraulics, Controls

MAIN TECHNICAL CHARACTERISTICS 1. Max. machining diameter mm 3.300 2. Min. machining diameter mm 200 3. Max. height of the part to be machined mm 2.000 4. Max. load on the table to 18 5. Table diameter mm 3.000 6. Table speed range rpm 1 ÷ 100 7. Main AC motor kW 100 8. Vertical stroke of the cross rail mm 1.500 9. Cross rail feed mm/min 400 10. Driving motors kW 7.5 11. Ram vertical stroke (Z axis) mm 1.250 12. Ram cross section mm x mm 225x225 13. Horizontal stroke (X axe) mm 1.850 14. Feed range (X and Z axis) mm/min 1 ÷ 6000 15. Rapid traverse (X and Z axis) mm/min 10.000 16. Feed motors torque (X and Z axes) Nm 22 CNC Equipment 1. Equipment type Fanuc 18iTb Overall Dimensions 1. Floor space m 7.1x 6 2. Max. height m 6.3 3. Machine weight (excluding special accessories) to 54

AL-2500/KX knotted wire mesh production machine was built in 2013 by KABEX P.P.H.U.. The purpose of the machine is to produce damage-resistant and durable wire mesh made of galvanised wire with a maximum length of 100 metres and varied wire cross-sections. The AL-2500/KX fixed knot net production line consists of: – machine body (1 unit), – guide roller with a brake to increase wire tension (1 unit), – tool table with turning rollers and wire guide tubes and plates (1 unit), – wire feeder with wheels that feed the appropriate length of wire onto the tool table for wire wrapping (1 unit), – pulling drum (1 unit), – mesh winding drum (1 unit), – twisting mechanisms (27 units), – guillotines (26 units), – wire bending clamps (27 units), – net stacking table, which performs a reciprocating motion in order to place the net coils tightly next to each other (1 u ...

I. Working capacity -Faceplate diameter 2000 mm -Workpiece max. diameter 2200 mm -Workpiece max. height: -under the cross rail 1850 mm -Workpiece max. weight 20 tons II. Movable cross rail : - Stroke on the column 1600 mm - Rapid moving speed 400 mm/min - Slow moving speed 10 mm/min III. Faceplate main drive in the turning mode. -Main drive motor power 60 kW -Faceplate speed range 250 rev/min IV. Working support: -Ram stroke (Z axis) 1500mm -Ram section 250x250 mm -Ram/taper ISO 50 -Tool magazine, tool number 16 (left tool magazine with milling tools and right tool magazine with turning tools or mixed) -Milling shaft drive motor power 37 kW -One tool holder max. Weight 30-70 Kg -Milling spindle speed 1 - 2000 rev/min V. Feeds -X, Z axes working feeds 1 – 6.000 mm -C – axis feeds (faceplate-milling mode) 0,001 + 2, 7 rev /min -Rapid feeds 10.000 mm/min  ...

3 m VTL 33 CNC 2 heads and magazines - REM SC 33 CNC 2MS Technical data: 1. Capacities - Maximum turning diameter with either Vertical Head 3300 mm - Maximum machining height under Cross Rail, at least 2000 mm - Maximum weight of the workpiece 20 tons 2. Table - Table diameter 3000 mm - Speed (inf. Variable) 1- 110 RPM - Main motor drive (AC) 100 KW - 4 jaw chuck with reversible jaws 3. Vertical Heads - Straight Ram vertical travel (250X250 mm cross section) 1300 mm - Horizontal and Vertical travel by means of 10 mm pitch ball screws 4. Cross Rail - Vertical Travel 2000 mm - Cross Rail elevating motor 7.5 KW AC 5. Feeds - Feed ranges 0.1 – 5 mm/rev - Rapid traverse feed 8000 mm/min 6. Overall Sizes Miwie7iv - Dimensions (approx.) L x W x H 6600 x 5.300 x 5.400 mm - Weight (approximate) 60 tons GEOMETRICAL TESTS (ISO 3655, ISO 230 ...

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 I09rgztr Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X  ...

Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 kW CROSS RAIL: Cross rail vertical travel: 2500 mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 250 x 250 mm Travel on Z axis: 1600 Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM WEIGHT OF MACHINE TOOL: 180000 kg OVERALL DIMENSION OF MACHINE TOOL: – Length x Width x Height: 13000 x 16000 x 10500 mm

Technical Details: Maximum turning diameter: 10000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,4÷40 RPM Table speed range –milling mode: 0,001÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41; 51)kW Machine tool tape: ...

Baler Presto HPK 50 HS (HPK 750 H), year of manufacture 2013 Manafacture: Presto Type: HPK 50 HS (HPK 750 H) Year of construction: 2013 Hours: 3788 Propulsion: 30 KW Pressing force: 500 kN Filling opening: 1600 x 650 mm (LxW) Duct cross-section: 700 x 950 mm Filling volume, max. 1.06 m³ Cycle time: 20 s Binding: 4-fold Throughput capacity at 35 kg/cbm: 5.5 t/h 60 kg/cbm: 8.8 t/h 100 kg/cbm: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Please note: All technical data refer to information provided by the manufacturer. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by appointment. The sale against prepayment is ex works, without guarantee and guarantee.

Maximum turning diameter: 8000 mm Maximum turning height over table: - Standard: 3150 mm - Option: 3500; 4000; 4500 mm TABLE dimensions: Table diameter: 4770 mm Maximum table loading capacity: 100 tons Table speed range – turning mode: 0,6÷45 RPM Table speed range –milling mode: 0,05÷2 RPM Power of main drive motor: 100 (option: 130) kW CROSS RAIL: Cross rail vertical travel: 2500 (option: 3000; 3800) mm Cross rail speed: 360 mm/min. WORKING HEAD and RAM: Working HEAD: - travel on X axis: 3375 mm Rapid feed X axis: 6000 mm/min Feed range: 0,01÷6000 mm/min RAM – section: 360 x 360 mm Travel on Z axis: 1600 (option: 1800; 2000; 2300) Rapid feed on Z axis: 6000 mm / min Working feed range on Z axis: 0,01÷6000 mm/min Speed range of RAM tool spindle: 10÷2000 RPM Power of RAM tool spindle drive motor: 37 (option: 41)kW Machine tool tape: ISO 50 WEIGHT ...

5.5m CNC VTL w/ Two turning heads The machine is New, available due to a postponed order. Technical Characteristics CNC equipment Siemens 840Di Work piece diameter: 5.500 mm Bludhcom Max. height: 3.200 mm Work piece weight: 60 to Table diameter: 4.500 mm Table speed: 0.2 - 30 rpm Power of main drive: 100 kW Hydrostatic bearing for the table Cross rail vertical travel: 2.600 mm Ram vertical travel: 1.800 mm Ram horizontal travel: 3.150 mm Ram cross section: 300 mm x 300 mm

Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...

properties Used belt conveyor of the Blume Fördertechnik Color: blue Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Material: Steel Incl. 2 feet specifications: Dimensions of the belt conveyor Type: DA080R0980-2 Connection voltage: 230/240 v/50Hz Engine: Kw 0.37 rpm 1380/70 Total length: 2.120mm Total width incl. motor: 530mm Total width without motor: 440mm Belt width: 400mm Strap Type: Smooth Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a connecting section in front of or between production and proces ...

properties Used belt conveyor of the Blume Fördertechnik Color: blue Incl. SEW engine Ideal for fast material transport Expertly dismantled and packaged Condition: fully functional Material: Steel Incl. 4 feet specifications: Dimensions of the belt conveyor Type: DA080R0980-2 Connection voltage: 230/400 v/50Hz Engine: Kw 0.37 rpm 1380/30 Total length: 7.250mm Total width incl. motor: 530mm Total width without motor: 440mm Belt width: 400mm Strap Type: Smooth Head: approx. 800mm, height-adjustable Frame height: 80mm Belt conveyors The webbing is ideal in the picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or delivery point and also serves, for example, as a con ...

ERSA HOTFLOW - 7 Soldering furnace / tunnel dryer / belt dryer / continuous dryer Type: HOTFLOW – 7 Convection oven as soldering oven / tunnel dryer / belt dryer / continuous dryer for drying sheet materials on top and bottom. 4 heating zones at the top, 4 heating zones at the bottom, for drying on both sides. Rolling bars at a distance of approx. 4.5 cm on 2 transport chains as a support for plates Temperature range from 20° to 300°C Rated power Pn = 72 KW Nominal current In = 106 A Voltage: 3 x 400 / 230V Back-up fuse: 3 x 125 A Frequency 50 Hz Power: 67 KW Year of construction: 2000 Dimensions: Length: 5250 mm Width: 1300 mm Height: 1750 mm (incl. warning light) Height: 1450 mm (without warning light) Dry section: Length of heating zones: 3300 mm Transport width: 500 mm Exhaust pipes and additional fan can be supplied. Circuit diagrams are ...

Aluminum Double Miter Saw Fabr. ELUMATEC Type DG 79Year of construction 1982Saw blade diameter: 380 mmSaw blade hole: 32 mmCutting length: 4500 mmSwivel range R + L: 15 ° 22.5 ° 30 ° 45 °Angle: 0 - 45 °Section range: sh. sectional diagramCompressed air connection: 7 barSaw blade speed: 3800 rpm.smallest cutting length: 500 mmDrive power: 2 x 3000 WWeight approx: 490 kgwithout controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make ELUMATEC type DG 104Machine -No: 25725 Year 1990Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramkl. Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- CNC control E 255used from an operating resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Machine -No: 25591 Year 1989Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramsmallest Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- Control E 200- Roller conveyorused from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Year of construction 1992Saw blade diameter: 420 mmSaw blade hole: 30 mmMax. Cutting length: 6000 mmminimum cutting length at 90º + 45º: 360 mmPivoting range inwards: 90º - 22,5ºInclination range inside: 90º - 45ºSaw blade speed: 2800 rpm.Section range: sh. diagramPower: 2 x 4.0 kWDimensions approx: 7500 x 1600 x 2200 mmWith- CNC control - screen -- separate control cabinetused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 6954, machine -No: 4066 built in 1989Technical specifications:Saw blade diameter: 6000 mmCan be swiveled up to: 45 °Section length up to: mmSaw blade speed: 2800 rpm.Unit adjustment: via spindle with handwheelSaw blade drive per unit: 2 x 3.5 kWelectrical connection: 380 VExternal dimensions L x W x H: 7200 x 1500 x 1900 mmWeight approx: 400 kgwithout controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hand lever section steel scissors make MUBEA type 5 SN / 10 Rfor sheet metal, flat and bar steelKnife length: 175 mmcuts sheets up to: 10 mmFlat material: 80 x 13 mmRound material: 22 mmSquare material: 22 x 22 mmOutside dimensions with base (without lever): 1400 x 350 x 900 mmWeight without base: 106 kgWith- Undercarriage mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Rarity! Pointer scale with piece counter and tare compensation model TOLEDOMake -No: 710566Maximum load: 25 - 720 kg1 section: 500 gSupport surface: 800 x 800 mmExternal dimensions: 900 x 1250 x 2000 mmlittle used, very nice and very old! in excellent conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic gripper feed make HEILBRONN type PVS 250/100/80Machine -No: 205238 built in 1993with attached strip straightener type RLE 27Technical specifications:CLIP FEEDmax.strip width: 250 mmmax.strap thickness: 3.0 mmFeed length range: 5 - 105 mmmax. material cross-section: 240 mm²Clamping force of the feed clamp: 17.2 kNcorresponding to frictional clamping force: 34.4 kNClamp tension force: 5.6 kNcorresponding to friction clamping force: 11.2 kNFeed force: 3.0 kNTAPE straightenermax.strip width: 200 mmmax.strap thickness: 2.0 mmNumber of straightening rolls: 7Diameter of the straightening rolls: 40 mmNumber of feed rollers: 2Diameter of the feed rollers: 40 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always avail ...

Cold circular saw make KALTENBACH type KKS 350Fabr. -No: 22003, built around 1965Saw blade diameter: 350 mm2 saw blade speeds: 15 + 30 rpm2 cutting speeds: 16.5 / 33 m / minSaw cross section approx: 130 x 50 mmaround max. 80 mmClamping stroke max. : 45 mmExternal dimensions L x D x H: 1000 x 1200 x 1900 mmWeight approx: 1500 kgWith:- pneumatic workpiece clamping (holding down)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

PRIMA POWER PLATINO 1530 laser was manufactured in 2001 in Italy. The machine is designed for cutting metal sheets made of structural steel, stainless steel and aluminium. The processed sheet may be up to 15 mm thick (structural steel), 8 mm thick (stainless steel) or 5 mm thick (aluminium). The feed rates in the X/Y/Z axes are 3000 mm (X axis), 1500 mm (Y axis) and 140 mm (Z axis) respectively. The laser cutting machine is equipped with a high performance ROFIN SINAR SLAB DC025 resonator with a power of 2500W, created for fast and precise cutting in metal sheets and guaranteeing the highest quality of cut elements. The installed PRIMACH 20L CNC control allows memorising many different work programmes and controlling every aspect of machining. The machine is offered with a wide range of equipment, including: CAD/CAM software SiCam v14 (license for one workstation) and post-processo ...

Packer, Fabr. Matec, type: VPE 1200, 4-head, for 0.5 lt. bottle in box of 20, box cross-section, YOC 2004 Unpacker, Fabr. Matec, sorting unpacker, type: VPA 1800 SA, 6-head, for 0.5 lt. bottle in box of 20, box traverse, with 2 tables, built in 2004 Machines removed, price on request

properties: Used pallet conveyor Condition: used with rust Material: Steel (galvanized) Color: gray Expertly dismantled and packaged 51.87 meters in stock Price per meter specifications Dimensions pallet roller conveyor approx. Total length of the system: 51.870mm Total length of one element: 2470 mm The plant consists of 21 elements Total width: 945 mm Clamping length: 850 mm Center distance: 130 mm Roll cross-section: 60 mm Castors of the manufacturer: Interoll Material: steel, galvanized Frame height: 70 mm Pallet roller conveyor Due to the excellent processing of the pallet roller conveyor, your material glides gently to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt tracks, inclined conveyors or telescopes for loading and unloading your  ...