134,096 used machines on RESALE, but how to find them? Machine Search
used, technically overhauled reinforcing steel bending machine. Rotations of the bending disc 8/16 rpm. Connection 16 A Single bending max. 1 piece of reinforcing steel 38mm D., 2 pieces of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.
- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m
Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 10 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 32 x 90 mm -Tool total length: 2430 mm -Transport dimensions: 820/90/H96 mm -Weight: 80 kg
chamfer lenght: 1530 mm plate thickness: mm distance between columns: 1530 mm pressure: 40 t stroke length max.: 300 mm travel -x axis: 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
PROFI PH 50-3H / 3-roll round bending machine If you want to bend profile or tube material, the Profi Bend is the best choice! With this profile bending machine, you can bend a wide variety of profiles into almost any desired radius. Made in Europe. Shaft diameter: 50 mm Roller diameter: 150 mm Shaft revolutions: 10 rpm Connected load: 400 V / 50 Hz Drive motor: 1.5 kW Feed distance: 120 mm Weight: 355 kg Dimensions: 1100x800x1400 mm Delivery & Payment
Key data: 200 t
Press brake – 200 T – Open width 1,600 mm For sale is a hydraulic press brake from the manufacturer DURENDUS with a maximum press force of 200 t. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm and a stroke of 1,000 mm, making it suitable for bending, forming and straightening work in industrial use. Technical data + information: Press brake – 200 T – Open width 1,600 mm General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Type: 2-column frame press - Manufacturer: DURENDUS - Press force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Usable area ram: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg Hydraulic cylinders - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylin ...
Ref.nr. 00918 Description d He Plant CNC Bending Machine for fully automatic wire and forming machining. The machine was commissioned in March 2019 and is designed for the cost-effective series production of complex bent wire parts. By combining different machining steps in one system, the SpeedMax series enables extremely efficient production with high precision and repeatability. Manufacturer: SCHMALE Maschinenbau GmbH Model SpeedMax L-20-1-03 Year of construction 2019 Technical data: Commissioning: 03/2019 Total system unit counter: 12,423,581 parts (as of 02/2026) Application: Wire bending and forming Fully automatic CNC-controlled production system Special features: Designed for high volumes and series production High production speed and process reliability Condition Under power can be demonstrated Submission date Immediately by arrangement
Used, technically overhauled reinforcing steel bending machine. Rotation of the bending plate 5/7.5/10/15 Power requirement 3.15/3.65 KW 2 footswitches with emergency stop function. Bending capacity max. 1 piece 45mm D. Reinforcing steel or 3 bars 28mm D. The control system is upgraded to Siemens Touch Display CC. Latest standard. 1 set of standard bending tool.
This 3-axis Finn-Power Shear Genius TRS 6 SBU was manufactured in 1996, featuring a punching force of 300 kN and a sheet working range of 2500 mm × 1250 mm. It supports up to 21 tool stations and can handle sheet thicknesses up to 6 mm. Automatic tool change system enhances productivity. Consider the opportunity to buy this Finn-Power Shear Genius TRS 6 SBU punching and bending machine. Contact us for more information.
Manufacturer: AMADA Year of Manufacture: 2001 Model: HFE 80-25 L Type of Machine: Bending Machine Maximum Tonnage: 800 kN Maximum Stroke: 350 mm Weight: 6100 kg Installed Power: 9 kW Find more here - .ucymachines/ Contact us at - sales@ucymachines
HEBÖ SSB-3 scroll bending machine was manufactured in 2015 in Germany by hebö Maschinenfabrik GmbH. The machine is practically unused and fully functional. It was started up only for the purpose of testing, during which single workpieces were produced. The HEBÖ SSB-3 is a professional bending machine for the production of decorative elements used in artistic blacksmithing. The machine is designed to bend steel rods and flat bars, enabling the creation of spirals, arches and other decorative elements. Machining is performed by means of interchangeable work heads, which gradually shape the material, ensuring high accuracy and repeatability of the finished parts. Continuous speed adjustment within the range of 1 to 50 rpm enables precise adjustment of operating parameters to the type of workpiece being machined. The machine also features a large work table, an integrated tool cabinet ...
2000mm 66 ton Y1 Y2 R1 Z1 Z2 X1 X2 Excellent condition With tooling
Inv. Num. : 7914 Type: PBM 7074 Producer: WEGENER Created: 2015 Parameters: Control system: Siemens Maximum bending angle: 90
Max. pressing force: 200 kN Max. tool height: 100 mm Manual and automatic mode possible With Siemens program control Operating instructions
This 9-axis BLM DH4010 fully electric CNC wire bending machine was manufactured in 2022. It features a dual-head design with a maximum wire diameter capacity of up to 12 mm for wire with tensile strength of 600 MPa. The machine includes advanced programming software, realistic 3D simulation, and automatic wire feeding. If you are looking to get high-quality wire bending capabilities, consider the BLM DH4010 machine we have for sale. Contact us for further details.
ZENITH MACHINES HRBM 65 3-roll bending machine was built in 2020 in China. The machine is designed for the precision bending of steel tubes and profiles into arcs, circles and spirals with a constant radius. The bending process is performed using three driven rollers rotating at a maximum speed of 9,3 rpm. The hydraulic pressure enables precise positioning of the upper roller. Side positioning shafts stabilise the workpiece during operation, increasing process stability, bending precision and the range of operations that can be performed. Thanks to its robust design and reliable components, the ZENITH MACHINES HRBM 65 is an excellent addition to professional production plants and workshops. The total weight of the bending machine is 720 kg. It is possible to purchase 4 ROLOTOK roller conveyors, each 3 m long with a roller width of 600 mm, at an additional cost. The price of one convey ...
A Numalliance CNC wire bending machine for the production of 2D and 3D wire-formed parts is offered. Axes: 7, wire diameter range: 3mm-10mm, control: CNC. Weight: approx. 4100kg, dimensions X/Y/Z: approx. 7900mm/3700mm/2000mm. Documentation available. The machine has been shut down since 2025. An on-site inspection is possible.
Key data: 1000 mm, 1 mm
with rebate groove and wire insertion grooves Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 1000 mm Sheet thickness: 1.0 mm . Colour: blue Machine weight: 45 kg Space requirement: 1200 x 400 x 1000 mm Shaft diameter: 50 mm
: : : total power requirement: 0.75 kW weight of the machine ca.: 0.22 t required space: 0.6x0.8x1.45 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Delivered on original pallet Auction-ID: A1-48552-19
Manufacturer: Transfluid Model: AB6-50 VE Type of Machine : Bending machine Can bend pipes up to DN50 by 90° Find more here - .ucymachines/ Contact us at - sales@ucymachines
Width of plate,mm 3000 Thickness of plate,mm 66-150 Description Hot and cold bending Force: 2200t Main roll: 860mm Changeable roll: 500mm Width: 3000mm Bending by circle arc Cold bending: 66mm Hot bending: 150mm Min diameter of cylinder: 1000mm Bending at the angle Cold bending: 30mm Hot bending: 60mm Internal bending radius: 60m weight: 100t
P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bendging Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.
equipped with many tools Auction-ID: A1-48552-50
Used machine in good condition. Available for immediate delivery. - Operating hours: 54.860 - Pressure force: 50 t - Bending length: 1.275 mm - Axes: 6 - Distance between uprights: 1.750 mm - Working speed: 1-10 mm/seg - Throat: 410 mm - Stroke max: 215 mm - Power: installed max: 7,5 kW - Dimensions (long x wide x high): 1.930 x 2.030 x 2.375 mm - Weight: 4.750 kg
Used machine in good condition. Available for immediate delivery.
Manufacturer: RAS Model: MiniBend Center 79.05 Year of manufacture: 2020 Type of Machine : Bending Center Included: robot KUKA KR16-2, spare parts and tools Find more here - .ucymachines/ Contact us at - sales@ucymachines
Roll bending machine manufactured in 2006. This FACCIN 4HEL 2134 features a maximum plate width of 2,100 mm and a maximum plate thickness of 28 mm. It is equipped with linear guides and has a top roll diameter of 350 mm. If you are looking to get high-quality rolling capabilities, consider the FACCIN 4HEL 2134 machine we have for sale. Contact us for further details.
Used machine in good condition. Available for immediate delivery. - Type: Hybrid - Operating hours: 23.850 - Pressure force: 140 t - Bending length: 3.060 mm - Axes: 6 - Distance between uprights: 2.600 mm - Returning speed: 160 mm/seg - Working speed: 10 mm/seg - Throat: 510 mm - Oil tank capacity: 80 l - Weight: 9.500 kg - Dimensions (long x wide x high): 3.950 x 1.875 x 2.600 mm
Used machine in good condition. Available for immediate delivery. - Operating hours: 34.027 - Control: Siemens Sinumerick 840D NC - Bending length max: 2.500 mm - Length min between the bends: 350 mm - Width min between the bends: 160 mm - Bending height max: 200 mm - Min length sheet: 370 mm - Max length sheet: 2.850 mm - Min sheet width: 180 mm - Max sheet width: 1.500 mm - Bending width max: 1.500 mm - Number of bends per side max: ilimitado / unlimited - Material thickness min: 0,5 mm - Maximum material thickness aluminium: 4 mm - Maximum material thickness steel: 3,2 mm - Maximum material thickness stainless steel: 2 mm - Max panel diagonal: 3.000 mm - Angle tolerance: +/-0?25 C? +- - Bending angle: -135? ... +135? C? - Bending tolerance: +/-0,15 mm +- - External bending radius min: 1,5/2 x espesor chapa / sheet width mm
Used machine in good condition. Available for immediate delivery. - Operating hours: 16.304 - Pressure force: 150 t - Bending length: 3.100 mm - Axes: Y1, Y2, X, R, Z1 & Z2 - Distance between uprights: 2.750 mm - Working speed: 10 mm/seg - Returning speed: 150 mm/seg - Locking speed: 150 mm/seg - Throat: 315 mm - Stroke max: 215 mm - Power: installed max: 11 + 15 kW - Weight: 9.800 kg - Dimensions (long x wide x high): 3.910 x 1.900 x 2.660 mm
Fully automatic, high-precision production cell for series production of piping systems (e.g. brake, fuel or hydraulic lines) including robot, feeder, double O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology. Technical data 1. CNC Mandrel Bending Machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of Make: 2001 Control: CNC multi-axis fault with operator panel Special features: Collet head can be moved in X / Y / Z, equipped with 3 bending planes for highly complex spatial shapes without changing tools. 2. Loading and unloading robots Manufacturer: Motoman (Yaskawa) Type: ERCS- ...
Used machine in good condition. Available for immediate delivery. - Type: TASC 6000 - Pressure force: 86,68 t - Bending length: 2.720 mm - Axes: 6 - Working area: 860 x 2.210 mm - Working speed: 25 mm/seg - Control: 24 - Stroke max: 215 mm - Weight: 8.200 kg - Dimensions (long x wide x high): 3.100 x 1.740 x 2.840 mm
Used machine in good condition. Available for immediate delivery. - Open Height: 1.000 mm - Inclination of beam: +- 3 mm - Backgauge movement: 800 (X) mm - Operating hours: 21.428 - Type: hydraulic - Pressure force: 120 t - Bending length: 3.110 mm - Axes: X, Y, R, Z1 & Z2 manual - Working area: 200 (Y), 600 (X), 880 (max. X), 320 (R) mm - Distance between uprights: 2.690 mm - Working speed: 200 (Y) / 500 (X) / 250 (R) / 1.000 (Z) mm/seg - Returning speed: 180 (Y) mm/seg - Throat: 420 mm - Control: T 3000 - Oil tank capacity: 200 l - Power: installed max: 27 kW - Weight: 8.300 kg - Dimensions (long x wide x high): 3.600 x 1.750 x 2.330 mm
Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 105 t - Bending length: 3.050 mm - Axes: 8 - Working area: 200 - 2.880 mm - Distance between uprights: 3.150 mm - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Frame type: O-frame - Returning speed: 110 mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 7.700 kg - Dimensions (long x wide x high): 4.406 x 2.555 x 2.555 mm
with BendMaster - Operating hours: N/A - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 6 (Z1, Z2, X1, X2, R1 y R2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm - Weight: 11.250 kg
Used machine in good condition. Available for immediate delivery. - Type: electrical - Pressure force: 55 t - Bending length: 2.050 mm - Axes: 8 - Working area: 200 - 1.770 mm - Distance between uprights: 2.100 mm - Returning speed: 180 mm/seg - Frame type: O-frame - Working speed: 10 (Y) / 350 (X) / 2.000 (Z) / / 150 (R) mm/seg - Throat: O-frame mm - Stroke max: 310 mm - Weight: 5.000 kg - Dimensions (long x wide x high): 3.388 x 2.385 x 2.555 mm
Machine fully revised with basic maintenance realised: Including: folding crowning - Operating hours: 38.498h - Table width L -R: 120 mm - Inclination of beam: +-10 mm - Pressure force: 130 t - Bending length: 3.060 mm - Axes: 4 (X+R, Y1/Y2) - Distance between uprights: 2.690 mm - Working speed: 1-10 (Y) mm/seg - Working speed: 500 (X) mm/seg - Working speed: 300 (R) mm/seg - Throat: 410 mm - Control: TRUMPF - Stroke max: 215 mm - Oil tank capacity: 250 l - Power: installed max: 18,5 kW - Weight: 11.250 kg - Dimensions (long x wide x high): 3.640 x 2.210 x 2.375 mm
Used machine in good condition. Available for immediate delivery. - Pressure force: 130 t - Bending length: 3.230 mm - Axes: 4 - Distance between uprights: 2.690 mm - Working speed: 10 mm/seg - Throat: 420 mm - Control: TRUMPF TASC 6000 - Power: installed max: 28 kW - Dimensions (long x wide x high): 3.980 x 1.740 x 2.835 mm - Weight: 10.900 kg
maximum number of results exceeded
please refine your search
50 € 
 ES-2.jpg)
