137,482 used machines on RESALE, but how to find them? Machine Search
Auction-ID: A1-51131-171
Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used
Measuring machine with hand-held measuring arm STIEFELMAYERhigh-precision measuring and marking plate cast steel-grey cast iron strongly ribbedMasch. No. 22890285 year of construction 1985Length 2500 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1970 mm, Y = 815 mm, Z = 840 mm- with 3-axis digital display Grundig MZ 1030- 5 pieces height-adjustable feetSpace requirement L x W x H 2500 x 1500 x 2500 mmWeight 3000 kgvery good surface;
TRAILERGEAR HAND WINCH + CABLE+HOOK, 540 KG Auction-ID: A1-40901-56
Manual Pipe Bending Machine, Pipe Bending Machine, Mandrel Bending MachineHand Pipe Bending Machine, Hand Wire Bending Machine, Bending MachineManufacturer: MEWAGing Power: max. 16 mm1 piece bending tool 15 mm with 25 mm bending radius1 piece bending tool 10 mm with 16 mm bending radius1 piece bending tool 8 mm with 9 mm bending radius1 piece bending tool 6 mm with 8 mm bending radius1 piece bending tool 5 mm with 8 mm bending radius- Turning plate with degree marking- Scope of delivery as shown- Wooden box for storageDimensions L x W x H: 570 x 480 x 145
TRAILERGEAR HAND WINCH + CABLE+HOOK, 540 KG Auction-ID: A1-40901-354
Measuring machine with hand-held measuring arm STIEFELMAYERMess and marking plates cast steel-grey cast iron strongly ribbedHigh-precision measuring plate with good surfaceYear of construction 1985Length 2000 mmWidth 1500 mmThickness 350 mmPanel thickness (top) 50 mm Solid material with 300 mm ribsWorking height approx. 800 mm- manually movable with measuring arm, measuring range X=1490 mm, Y = 1000 mm, Z = 1250 mm- with 3-axis digital display Grundig MZ 1030- machined side surface at 90 angles to the table surface, 2000 x 350 mm - 5 pieces of height-adjustable feetSpace required
TRAILERGEAR HAND WINCH + CABLE+HOOK, 540 KG Auction-ID: A1-40901-55
pressure:2 t dayligth:80 mm Center of spindle to wall or column:100 mm weight of the machine ca.:0,5 t dimensions of the machine ca.:0,8 x 0,6 x 2,0 m Hand operated fly press, with center turning device appr. 100 x 400 mm length - Handwheel diameter 600 mm
pressure:10 t distance between columns:450 mm :1500 mm table-size:450 x 400 mm weight of the machine ca.:470 kg dimensions of the machine ca.:1400 x 750 x 1600 mm
pressure:20 t Stroke:230 mm table surface area:Ø600 mm distance table - lower edge of ram:770 mm weight:595 kg
plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm
; Transport weight [kg]: 57200; Engine: TD100G; Lift height[mm]: 625; Maximum lift capacity [kg]: 42000; Power type: 4000002
blade length: oben 211/unten 180 mm plate thickness: max. 6 mm round bar steel: max. 13 mm weight: ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
HAND CREASING & PERFORATING Equipment / further information: new tool for perforating
Manufacturer: NIDEC SANKYO Model: SR8220-019 Year of Manufacture: 2008 Type of Machine: 200mm THIN WAFER Loader NSX Condition Good Weight 1,433 lb (650 kg) Find more here - .ucymachines/ Contact us at - sales@ucymachines
Used bread roll line with proofer EBERHARDT, type: Primo-Star / Vario-Star -In bakery condition- For Kaiserbrötchen, Kärtner Brötchen and Sternbrötchen - Primo-Star head machine - Proofer Vario-Star - Workflow from left to right - Weight range: 20 - 85g - Incl. spare engine - Double fermentation carriers - with flour Visits and test runs are possible by arrangement.
NEW, 2,40 m working width, 2.0 m³ capacity, 658 kg weight, suitable for Bobcat telescopic handler attachment
Manufacturer: Heina Model: TT2-1000/1000 Year of Manufacture : 2018 Condition : Very Good Find more here - .ucymachines/ Contact us at - sales@ucymachines
We have two grain unloaders capable of discharging vessels with a draft of up to 17 meters (approximately 100,000 DWT). One unit is a mechanical unloader and the other is a pneumatic unloader. Details are as follows: Manufacturer: Bühler Year of Manufacture: 1983-1985 Mechanical Chain Transporter HM1-T1 + HM2-T1 Transporter type: HL-SKT RSH-450 Feed capacity: 1000 t/hour grain Total length: 28.1 m Chain speed: 2.28 m/s Drive shaft speed: 37.7 rpm Torque on drive shaft: 40,200 Nm Drive power at shaft: 164 kW Drive system: two hydro motors on each drive shaft Hydraulic motor type: MK 43-09200-CO-RN Absorption capacity: 9.2 liters per rotation Specific torque: 147 Nm/bar Nominal torque: 20,100 Nm Nominal pressure: 156 bar Chain Transporter in Boom HM1-T2 + HM2-T2 Transporter type: BKT 1210/290 142V 002 TWIN Feed capacity: 1000 t/hour grain Total length: 33.2 m Chain sp ...
Demonstration device Hand punch incl. 4-piece haulm divider and haulm plate DIMENSIONS Length 840 mm Width 585 mm Height 1120 mm Weight 42 kg
Plant for shredding of frozen blocks consisting of:, Coarse pre-cutting - Blocks are fed directly from the pallet into the machine with a forklift, the pre-cut pieces are taken over by a Z-band and transported to Vogelsang - shredding. They are inspected for metal contamination by a LOMA metal detector., The shredded parts are conveyed via a Z- conveyor belt to the batching plant. It has a capacity of approx. 2,000 kg. The batching container rests on load cells. A pallet box conveyor system ensures that the pallet boxes are filled with a preset weight and transported further after filling., Further data, photos, and videos available on request., The machines can also be purchased individually.
This work piece handling system was manufactured in 1999. Consider the opportunity to buy this ROMMEL BM600S work piece handling system. It features a conveyor belt and BE unloader, making it suitable for efficient material handling tasks. Reach out for further details regarding this machine.
Handlebar scooter for transport scooter( 4 pieces )suitable for Euroscooter for boxes 60 x 40 cmForks: galvanizedRubber wheels with back holeincl. Connecting screw and nutDetails see picture
maximum number of results exceeded
please refine your search
10 € 
.jpg)
.jpg)
.jpg)
.jpg)
