128,592 used machines on RESALE, but how to find them? Machine Search
wire diameter 2,4-4 mm spring diameter 42-55 mm output - pieces/min ca. 32 m
wire diameter 2,5-4,5 mm spring diameter 20-50 mm output - pieces/min max. 200
The Mac Ewans Centrifugal pump is a pump for use in sanitary applications. Previous used in a Casein plant. Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A. Diameter of the impellor: 180 mm. Connections on the inlet: 70 mm. Connections on the outlet: 60 mm. Estimated capacity: ± 20.000 ltr/h., macewans.co.nz/, Type of Machine: Centrifugal pump, Stock Number: 1444, Diameter of the impellor: 180 mm, Motor: 7,5 kW - 400 V - 50 Hz - 1.440 rpm - 14,2 A, Estimated capacity: ± 20 m3/h
CONTROLS electronic controls ELECTRICAL SPECIFICATIONS total power consumption: 140 kW mains power supply: 145 kVA mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2540 mm space requirements -front/back-: 5000 mm total height: 2840 mm total weight approx.: 12000 kg Laminating machine Maximum textile width 3200 mm Maximum temperature 240 °C Heating time (at 3 m/min) approx. 2 hours Cooling time (at 6 m/min) approx. 3 hours Mechanical speed 0-40 m/min
Used line for the production of Mazzoni toilet cubes with a capacity of 1000 kg/h. The line includes: – Mixtruder type SZ-1000 – Filtrocyclone – Extruder SX-B-250/HE – Extrusion head. – Slicer – Twin screw conveyor – Year of manufacture 2007.
Margarine pilot plant with 1x high pressure pump, 3x crystalizer scrap surface heat exchangers (SSHE), 1x pin worker (1 - 2 and 3 liter), 1x phase inverter, 1x cooling unit (R22) and control panel. Working product pressure of the pilot plant up to 80 bar (8000 kPa). Capacity up to 90 kg per hour., - High Pressure Pump, High Pressure Pump for pumping the margarine emulsion through the margarine pilot plant. Gerstenberg & Agger A/S, type Labo Pump 2-22-4 , serial number 12.211, year 1990, product pressure max 80 bar, temperature max 100 °C, capacity max 200 kg/h, motor 415 V - 50 Hz - 1,1 kW. Control panel with Siemens S7-200 PLC., - Scraped Surface Heat Exchanger 01, Cooler., Pilot G&A Perfector - SSHE Cooler Perfector 57 is designed for lenient cooling of medium viscosity, pumpable food like margarine. Gerstenberg & Agger A/S, type Perfector Lab 1x57, serial number 12910, year 1993, dut ...
Corner cleaning machine ROTOX Type EPA 472 6605 Year of construction 2010 CNC Corner Cleaning Machine Fully automatic plastering of visible surfaces, outer corners, Sealing grooves/areas, inner corners on PVC window frames and sashes, also with radii, curves and slopes. Automatic profile feeding Integrated reversible arm for turning frame elements Variable tool loading with up to 12 tool positions Tool diameter 170/190 mm Machinable profile width 50 mm – 130 mm Machinable profile height 50 mm – 115 mm Revolutions 5500 rpm. Current consumption 22.8 amps Voltage 400 volts Frequency 50 Hz Compressed air 6-7 bar Weight 1,980 kg Machine dimensions approx. 6000 mm x 4000 mm x H 2000 mm
ZUCHETTI – Production Line for Metal Pipes General data: Manufacturer: Zuchetti Machine type: Pipe production line Year of manufacture: 2006 Weight: approx. 80000 kg Dimensions (L x W x H): approx. 150000 x 12000 x 2500 mm Condition: Partially overhauled Line components: Double uncoiler for continuous feeding of metal strips Welding junction station for seam joining Horizontal sheet uncoiler for optimized production flow 9 profiling stages for pipe forming High-frequency welding system for durable weld seams Turk heads for final processing Automatic packaging station Electrical panels for control and safety Available roller sets: Square pipes: 10x10 mm; 15x15 mm; 20x20 mm; 25x25 mm; 30x30 mm; 35x35 mm; 40x40 mm; 50x50 mm; 70x70 mm Round pipes: 20 mm; 21.3 mm; 21.8 mm; 25 mm; 25.4 mm; 26.9 mm; 28 mm; 30 mm; 31 mm; 32 mm; 33.7 mm; 35 mm; 36.8 mm; 38 mm; 38.4 m ...
Window system WEINIG, Unicontrol 6, S/N 035-823, built in 1997 TECHNICAL DATA: Pneum cross-cut saw. clocked (3 KW) with laser directional light Slotted spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW Synchronous spindle 50 x 120 mm - motor 7.5 KW Longitudinal profiling spindle 50 x 320 mm for 4 tools of 80 mm each - motor 11 KW Fitting spindle pneum. clocked 40 x 160 mm - motor 3 KW Saw/groove spindle horizontal top, pneum. clocked - motor 3 KW Feed adjustable from 6-12 m/min. - Motor 1.1 KW Screen control for 99 window types Support strip for rung production pneum. Timed Studio window setup with digital angle display Length stop up to approx. 3,500 mm Milling device with support rail Return transport device to the machine operator Machine complete with operating instructions, circuit diagrams, spa ...
Tetra Pak Tetra Therm Aseptic Visco Line for pasteurisation / sterilization of concentrated beverage bases by a Tubular Heat Exchanger (THE) system. Capacity 2.600 up to 8.150 liter per hour. At the current plant the line is used for products up to 100 °C. The indirect heating temperature is up to a maximum of 135 °C. Holding time set at 0 / 5 / 10 seconds. CIP Cleanable., In the Tetra Therm Aseptic Visco system, heating and cooling will take place in Tetra Spiraflo MTC tubular heat exchangers. Modules with a narrow ring section are used for heating and cooling to ensure optimal heat transfer. The product is pre-heated in stages within the Spiraflo tubular heat exchangers. The Spiraflo tubular heat exchanger is equipped with a sliding O-ring system. This means that the product and the outer tubes are not welded together. This prevents stress corrosion cracking and minimizes maintenance ...
Machine: MASTERWOOD door production line DOORLINEPROCESS Year: 2002 Components: PROJECT DOOR + DOORLINE + AMS automatic transfers Works: calibration, hinge housing, lock drilling, key/handle hole, installation of ANUBA plugs Loading: CARICATORE AMS system, suction cups, vacuum pump Panel dimensions: L max. 2500 mm, max. W 1300 mm, h max. 120 mm Transfer systems: AMS mat, AMS SCARCATORE Control: GENERAL ELECTRICS T-LINE + TECNOS MW CN12 Standards: EC Auction-ID: A1-45443-37
Adjustable feed station with 5 rollers (1500x600x250) Working width 1200 mm. 22 rolling stations with double horizontal axes. Adjustable guides. Precision bearings per station. Cardan driven rollers Hydraulic power unit (1520x1400x800 mm) with Tatung 22 kW FBDP-HD drive. Hydraulic cutting unit with double punch equipped with Leedan LDSM230D-II 15 kW servo motor. Equipped with hydraulic decoiler (2500x1400x2000 mm, capacity 5000 kg. Including roller conveyor (3000x1020x760 mm) Auction-ID: A1-41991-1
Adjustable feed station with 5 rollers (900x700x360) Working width 630 mm. 12 rolling stations with double horizontal axes. Adjustable guides. Precision bearings per station. Hydraulic power unit (1000x600x1100 mm) with 4 kW drive. Hydraulic cutting unit. 20 kVA Cheng Hsuan transformer. Equipped with decoiler (1300x700x1100 mm) Including roller conveyor (3000x1020x760 mm) Auction-ID: A1-41991-4
Double Head Welding Machine Urban Plastic Window Welding Machine Type: AKS 4110 Year of Make: 2/91 Working length max. 3090 mm Connected load 6.5 kW Operating pressure 8 bar Air requirement per weld 15 l Electronic temperature control Welding level 0 – 300°C Electronic temperature control Welding limitation 35 – 65°C - Heated blade welding bead limitation 2 mm - Welding of 2 corner joints at an angle of 90° in one operation. - Fast and accurate insertion of the profile thanks to the automatic welding head feed. - Automatic weld adaptation to different profile cross-sections - Safety clamping systems that automatically adjust to different profile heights. - Guide elements made of hardened, ground shafts with recirculating ball bushings. Machine dimensions: L 4015 mm x W 1100 mm x H 1840 mm Weight: 790 kg
Welding Machine Urban Plastic Window Welding Machine Type: AKS 3610 Year of manufacture: 2/92 Connected load 2.7 kW Mains voltage 220 V, 50/50 Hz Operating pressure 8 bar Air requirement per weld/stroke 15 l at 6 bar Adjustment range angle 30° - 180° Profile height min. 30 – max. 105 mm Profile width at 90° max. 157 mm Compressed air connection NW 8, 7 bar - Heated blade bead limitation 0.2 mm - Angle welding from 30° - 180° with excellent accuracy. - Above-average welding results of the AKS 3610 for acrylic and foil-coated profiles. - Optimization of the welding result through parallel welding processes. - Individual setting of all welding parameters - Quick change of the outer contour allowances with holding magnets. Machine dimensions: L 770 mm x W 880 mm x H 1500 mm Weight: 320 kg
Wing Attachment Table Dimensions approx. L 2700 mm x W 1300 mm with glazing bead saws right and left Handle drilling unit with 3 drills Automatic screwdriver Lock box milling machine Drill bits for corner trestles Good, ready-to-use condition.
The Waukesha Cherry-Burrell 015 is a rotary positive displacement pump which can handle dairy products (e.g., yoghurt, quark, curd and butter), solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure to, so output is relatively constant and continuous. Duo - twin wing stainless steel lobes. Nominal displacement: 0,054 liter per revolution. Maximum nominal capacity: 2,0 m3/h. Inlet / Outlet connection: 1-1/2. Maximum product pressure: 13,8 bar. Maximum pump speed: 700 rpm. The pump is used in a ice cream factory for product pumping. The current motor with this pump is 0,75 kW - 1,395 rpm - 380/420 ...
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
Tebel OST-IV Closed cheese vat of 8.000 ltr. Double jacketed for injection of steam or hot water so the temperature of the milk inside the vat can be indirectly adjusted. Stirring, cutting tools, welded to a horizontal shaft. This is driven by a drive unit with frequency converter. During cutting the tools rotate in the opposite direction as during stirring. The coagulum is cut by sharp radial knives of stainless steel. Whey can be drawn off through a perforated pipe (whey suction device). This pipe is lowered into the whey until it is only just immersed. The curd is discharged through the bottom valve. The vat is inclined (4%) toward the bottom valve to facilitate emptying. After a production run the vat is cleaned by four rotating CIP nozzles located in the top. All parts are made of stainless steel AISI 304 except the drive unit. Stainless steel MCC panel at the backside, close to the ...
consisting of: automatic glass retraction, Fabr. HEGLA, Type: ISO, Ser No. 2033401055, glass washing and drying station, Fabr. LISEC, Type: VHW-F29/V8, YOC 2022, Ser-No. 315117/944, Glass transport station, Fabr. LISEC, Type: RTVB1527MZU2, Year 2019, Ser No. 383109341, visiting station, Fabr. LISEC, Type: RSV-38/27B, Year 2019, Ser No. 320-109338, Press Unit, Fabr. LISEC, Type: FPS-35/27U2, Year 2019, Ser-No. 343-109342, Frame Conveyor, Fabr. LISEC, Type: FR-400H, Year 2019, Ser-No. 550-109339, Dam system with sealing system, Fabr. LISEC, Type: VSL-10-27, Ser-No. 100170 with 2 stowage sections, dead weight: 4500 kg, as well as separate control/control cabinet system with cooling system, Fabr. RITTAL, control unit, dosing unit, pump and valve technology, max. working height of the system: 2700 mm
Complete falling film vacuum evaporator, previously used for skimmed milk or sweetened whole milk, consisting of a 4 effect TVR Evaporator. Still mounted in the cheese plant in Spain till end of April 2026. The product feed rates in the installation are ± 14 t/h with a comparative temperature between 73 and 50°C from the 1st to the 4th effect., Processing rates used by the current plant for skimmed milk:, - Infeed flow: 14.000 kg/h @ 9% DM, - Infeed temperature: 5 °C, - Water Evaporation: 11.375 kg/h, - Outfeed flow: 2.625 kg/h @ 48% DM, - Steam consumption: 2.050 kg/h, Processing rates used by the current plant for sweetened whole milk:, - Infeed flow: 14.000 kg/h @ 25% DM, - Infeed temperature: 5 °C, - Water Evaporation: 7.637 kg/h, - Outfeed flow: 6.363 kg/h @ 55% DM, - Steam consumption: 1.375 kg/h, Approximately operating temperatures:, - First effect (steam side): 73 °C, - Fir ...
Multichamber DC magnetron sputter line designed for roll-to-roll thin film deposition, consisting of: 6x DC magnetron process chamber type RDM 1800 L (2009),2x intermediate chamber, 1x cooling chamber, 1x rewind chamber, 1 unwinding room, 21x Pfeiffer” Turbomolecular pump type HiPace 2300 U (2009), partly with built-on controller type TC 1200, 2x Single” temperature control unit (2009), 6x Trumpf” HF generator type TruPlasma DC 3040, 1x mainpower switch cabinet, 2x Seifert” heat exchanger type RK-2114 AM (2009), 1x Carrier” cooling unit (outside) type 3ORBO0342 refrigerant R14A (2009), 2x Leybold” vacuüm unit SV630 B (2009) and 1x Leybold” vacuüm unit type D40 B and 1x type SV630 B (2009) in soundproof enclosures, various transport utility items, Used floor space approximately 27.500x12.500mm Auction-ID: A1-43459-1
Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm
, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height: ...
Used Complete Tinplate Can Production Line for Oil (4â20 L) – Overview This second-hand, industrial packaging line is a complete tinplate can production system engineered for 4â20 L oil containers. Configured for body making, end making, compound lining, curing, double seaming, and handle welding, it offers a proven route to scale up edible oil container manufacturing. The line features reputable OEMs such as Soudronic, BIBRA, YAGUCHI, Cevolani, W.R. GRACE, and RKHD, making it a robust choice for companies seeking a used bottling line complement or an integrated container-making solution for food and beverage packaging operations. Year of manufacture: 1976 (body making section built in 1981) Technical Specifications & Performance Data Container Range & Materials Format range: 4 L to 20 L tinplate steel cans for edible oil and related viscous products Body styles: compatib ...
New plastic handles for drawers, tool cabinets, etc. 380 pieces. Partially original packaged. Price reduced VS €/piece
ė engine capacity exceeding 1.1 kW (900 RPM). 310 x 250 mm grinding shaft. 2 clamping ė velen styles (the rubber surface), diameter 30 mm. the preparation of Į (i) the measurements x 350 x 655 mm, 505. the preparation of Į weight 20 kg.
Handheld control unit Schleicher type HGB 2P-0301 for Battenfeld
Bosch Turbo Scara SR8 Robot + Control IQ200 Manufacturer: Bosch Order No. 3842999836 Serial No.3810198 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg + Control IQ 200 (Changes and errors in the technical data, information reserved!) Panning area see picture Item condition used In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.
Hand lever plate and profile steel shears heavy and stable outing cuts sheets, round steel (approx. 15mm), flat steel and T-profiles Mounted on base Special price
various hand spindle presses small More: Foot pendulum press Jantsch
Te Koop: JLX vlinderkleppen handbediend. Butterfly valve. Wafer. Type DN 250 Pn16 EPDM
Sheet metal width - 170 mm, Sheet thickness 8 mm. 80 x 10 mm, flat steel Steel bar cutting stencils for round and square Knife length 170 mm. Sheet holding device Machine length 800 mm (1000 mm with moveable base) Machine height 500 mm plus 560 mm for base Machine weight 255 kg,. on mobile base
MECHANICAL PAPER SCALE WITH HANDPROBE PUNCH M. No.: 618371 Equipment / Additional information: Mechanical Paper Scale Schiltknecht Switzerland F. No: 8351
Laser handheld spectrometer VULCAN for quick and easy chemical elemental analysis. Vulcan is one of the fastest metal analyzers on the market and is designed to last. It provides reliable material identification in just one second, based on laser-induced plasma spectrometry, without any X-rays. Whether for scrap sorting or PMI quality control, Vulcan always provides accurate and consistent material ID data. Significant increase in productivity An increased number of analyses per day makes all the difference, especially for extensive inventories. Low operating costs Because Vulcan is a laser device, employees do not need to attend expensive and time-consuming radiation training and certification training. Long-lived Vulcan is IP54 certified (equivalent to NEMA3) and meets military ruggedness standards (MIL-STD-810G). It also comes with a 3-year warranty. Proven It is ...
XMET8000 handheld spectrometer for quick and easy elemental analysis and many other possibilities. The X-MET8000 handheld XRF instruments offer high performance for reliable testing of materials and chemical compositions: fast, precise analysis for fast sorting (metals, polymers, wood, solutions, soil, ores, minerals, etc.). The X-MET is practical, robust and easy to use, for results you can rely on. The X-MET is perfect for the analysis of light elements (Mg, Al, Si, P, S, Cl). It offers the lowest detection thresholds with laboratory-quality results in seconds, day after day. Test a wide range of materials with the versatile fundamental parameter (FP) method and empirical calibrations (traceable to certified reference materials) where the highest precision and accuracy is required. Friendly The intuitive, icon-based user interface requires minimal operator instruction. ...
Dokadek formwork The beamless hand formwork in lightweight steel construction. Quick assembly and dismantling High shuttering speed due to 3 m² elements Fast shuttering of larger ceiling heights without climbing aid due to element length 2.44 m Fast stripping due to simple and safe swivelling of the elements Quick and safe handling thanks to ergonomic grip holes in the edge profile of the large, rectangular elements Long service life due to galvanized frame Dokadek formwork The beamless hand-set formwork system as a lightweight steel construction. Fast assembly and disassembly High-speed forming with large panels measuring 3 m² Fast forming of greater room heights without ladder or platform systems thanks to 2.44 m long panels Fast stripping made possible by panels that are easily and safely tilte Long working life due to galvanized frame
For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg
1 of un-used! column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 1998. Standard column 2.300 mm tall. Designed for a maximum lifting load of 30 kgs. Maximum radius 3.000 mm. Vertical stroke 1.500 mm. With special gripper designed to lift, lower and tilt products approx. 45 degrees. Assumed application was handling storage bins 470 x 350 mm (pictures show example only, not necessarily the exact product handled). Could of course be used for various products. Width and depth of gripper can be adjusted. CE-marked but no operating manual available. Pneumatic diagram and spare parts list in German available. Two identical balancers available. Visible mobile foot-plate NOT included (used for our own internal transport and demo purposes).
Henkellikator COMAG Power 100 + 100 Pack/min The machine is double lane
Brand Lisec Type LBH-25V Fashion model Butyl Coating Machine for Spacer Frames Serial Number 155098 Construction year 1997 Weight 0.74ton Assets 3.45kW Air pressure 6bar Water pressure: n/a Length m 3.1 Width m 0.75 Height m 0.94 Working height +/- 0.7m Transport dimensions L x W x H 3.1x 0.75x 1m Min.-max. profile thickness/height 4-24mm / 6-8.5mm Min. mate 120×120 Number of brushes n/a Number of spindles n/a Condition machine working Control type B&R Electric connection 3x400V +N+PE Missing parts As it is Documentation available on request Instructions available on request Electrical diagram Yes Parts list Yes Available software backup Photos/film available: photos
Technical data: -Working width 1030 mm -Material thickness 1.25 mm -Roll diameter 55 mm -Upper roller swing -Rear and front wave about eccentric adjustable -Rear and front wave each with a Groove to round -for sheet metal with wire inlay -Space requirement approx. B H 1350 x 1050 x D 750 mm -Weight approx. 150 kg
Technical data: -maximum working width 750 mm -maximum material thickness approx. 1.0 mm -Beam + upper cheek fold away -Bending rail with cut-outs - space requirement approx. B 1000 x H 1100 x D 750 mm -Weight approx. 70 kg
Manual hand table for printing on paper, cardboard, film, PVC, acrylic etc. Up to 10 cm in thickness With counterweight Printing table: External dimensions: L 2395 mm x W 1675 mm x H 800 mm plate: 1250 mm x 1740 mm 100 x 100 cm weight: 150 kg min screen: 50 x 50 mm maximum printing frame: 1100 x 1500 mm
2 rolls 1st role: Dimensions (x-y-z) mm: 1300x720x650 2. Role Dimensions (x-y-z) mm: 1500x400x650 Forks tiltable: Yes Max Weight: Kg: 400 Switch box + roller gears Total connection: 2.5 kW
maximum number of results exceeded
please refine your search
10.000 € 
